! Started logfile: /vlbi/uf001/uva//J2206-1835_S_a_dfm.log on Mon Jan 14 06:08:00 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J2206-1835_S_a_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J2206-1835_S_a_uva.fits
! AN table 1: 111 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.851602 visibilities/baseline/integration-bin.
! Found source: J2206-1835
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 10209 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J2206-1835_S_a]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 99 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 99 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 99 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.283957Jy  sigma=17.078672
! Fit after  self-cal, rms=0.890940Jy  sigma=12.981868
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.948 mas, bmaj=12.99 mas, bpa=6.094 degrees
! Estimated noise=0.724805 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.208487 Jy
! Component: 100  -  total flux cleaned = 0.332379 Jy
! Total flux subtracted in 100 components = 0.332379 Jy
! Clean residual min=-0.049886 max=0.102818 Jy/beam
! Clean residual mean=-0.000447 rms=0.017968 Jy/beam
! Combined flux in latest and established models = 0.332379 Jy
! Performing phase self-cal
! Adding 52 model components to the UV plane model.
! The established model now contains 52 components and 0.332379 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.632077Jy  sigma=5.596814
! Fit after  self-cal, rms=0.630434Jy  sigma=5.567357
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.717 mas, bmaj=14.69 mas, bpa=3.951 degrees
! Estimated noise=0.48216 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.154958 Jy
! Component: 100  -  total flux cleaned = 0.259113 Jy
! Component: 150  -  total flux cleaned = 0.333138 Jy
! Component: 200  -  total flux cleaned = 0.386512 Jy
! Total flux subtracted in 200 components = 0.386512 Jy
! Clean residual min=-0.077649 max=0.145160 Jy/beam
! Clean residual mean=-0.000392 rms=0.025528 Jy/beam
! Combined flux in latest and established models = 0.718891 Jy
! Performing phase self-cal
! Adding 68 model components to the UV plane model.
! The established model now contains 110 components and 0.718891 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.537240Jy  sigma=4.896605
! Fit after  self-cal, rms=0.535529Jy  sigma=4.875354
! Inverting map 
! Added new window around map position (9, -1.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.137868 Jy
! Component: 100  -  total flux cleaned = 0.224187 Jy
! Component: 150  -  total flux cleaned = 0.29049 Jy
! Component: 200  -  total flux cleaned = 0.345735 Jy
! Total flux subtracted in 200 components = 0.345735 Jy
! Clean residual min=-0.069750 max=0.127379 Jy/beam
! Clean residual mean=-0.000361 rms=0.020544 Jy/beam
! Combined flux in latest and established models = 1.06463 Jy
! Performing phase self-cal
! Adding 79 model components to the UV plane model.
! The established model now contains 183 components and 1.06462 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.454065Jy  sigma=4.134365
! Fit after  self-cal, rms=0.449282Jy  sigma=3.972062
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.717 x 14.69 at 3.951 degrees (North through East)
! Clean map  min=-0.068623  max=0.24275 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.23     FD        0.81     HN        3.29     KP        1.14     
!   LA        0.77     NL        1.62     OV        1.42     PT        0.80     
!   SC        2.68     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.24     FD        0.81     HN        2.71     KP        1.20     
!   LA        0.85     NL        1.47     OV        1.43     PT        0.76     
!   SC        2.36     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.34     FD        0.86     HN        2.58     KP        1.18     
!   LA        0.76     NL        1.47     OV        1.44     PT        0.67     
!   SC        2.53     
! 
! 
! Fit before self-cal, rms=0.449282Jy  sigma=3.972062
! Fit after  self-cal, rms=0.437156Jy  sigma=3.406605
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=6.077 mas, bmaj=16.92 mas, bpa=4.432 degrees
! Estimated noise=0.679741 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0441827 Jy
! Component: 100  -  total flux cleaned = 0.0532032 Jy
! Component: 150  -  total flux cleaned = 0.0665743 Jy
! Component: 200  -  total flux cleaned = 0.075589 Jy
! Total flux subtracted in 200 components = 0.075589 Jy
! Clean residual min=-0.063244 max=0.091876 Jy/beam
! Clean residual mean=-0.000163 rms=0.019874 Jy/beam
! Combined flux in latest and established models = 1.14021 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 209 components and 1.14021 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.422145Jy  sigma=3.284712
! Fit after  self-cal, rms=0.423929Jy  sigma=3.260910
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.423929Jy  sigma=3.260910
! Fit after  self-cal, rms=0.464493Jy  sigma=2.805907
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.798 mas, bmaj=17.94 mas, bpa=5.043 degrees
! Estimated noise=0.756393 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0446775 Jy
! Component: 100  -  total flux cleaned = 0.0654789 Jy
! Component: 150  -  total flux cleaned = 0.0819446 Jy
! Component: 200  -  total flux cleaned = 0.0942947 Jy
! Total flux subtracted in 200 components = 0.0942947 Jy
! Clean residual min=-0.057771 max=0.088632 Jy/beam
! Clean residual mean=0.000319 rms=0.019150 Jy/beam
! Combined flux in latest and established models = 1.23451 Jy
selfcal
! Performing phase self-cal
! Adding 47 model components to the UV plane model.
! The established model now contains 231 components and 1.23451 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.454126Jy  sigma=2.688409
! Fit after  self-cal, rms=0.456892Jy  sigma=2.672847
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (16.5, 35).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0796195 Jy
! Component: 100  -  total flux cleaned = 0.0967733 Jy
! Component: 150  -  total flux cleaned = 0.118836 Jy
! Component: 200  -  total flux cleaned = 0.137226 Jy
! Total flux subtracted in 200 components = 0.137226 Jy
! Clean residual min=-0.049774 max=0.048654 Jy/beam
! Clean residual mean=0.000336 rms=0.015369 Jy/beam
! Combined flux in latest and established models = 1.37173 Jy
! Performing phase self-cal
! Adding 47 model components to the UV plane model.
! The established model now contains 276 components and 1.37173 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.439548Jy  sigma=2.400153
! Fit after  self-cal, rms=0.435367Jy  sigma=2.358808
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.435367Jy  sigma=2.358808
! Fit after  self-cal, rms=0.438575Jy  sigma=2.141610
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.941 mas, bmaj=17.93 mas, bpa=3.241 degrees
! Estimated noise=0.721565 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0314153 Jy
! Component: 100  -  total flux cleaned = 0.0365904 Jy
! Component: 150  -  total flux cleaned = 0.0419405 Jy
! Component: 200  -  total flux cleaned = 0.0490125 Jy
! Total flux subtracted in 200 components = 0.0490125 Jy
! Clean residual min=-0.041438 max=0.047730 Jy/beam
! Clean residual mean=0.000255 rms=0.012610 Jy/beam
! Combined flux in latest and established models = 1.42075 Jy
selfcal
! Performing phase self-cal
! Adding 51 model components to the UV plane model.
! The established model now contains 315 components and 1.42075 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.433891Jy  sigma=2.045716
! Fit after  self-cal, rms=0.433152Jy  sigma=2.031355
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00600393 Jy
! Component: 100  -  total flux cleaned = 0.0124199 Jy
! Component: 150  -  total flux cleaned = 0.0186919 Jy
! Component: 200  -  total flux cleaned = 0.0243943 Jy
! Total flux subtracted in 200 components = 0.0243943 Jy
! Clean residual min=-0.041880 max=0.047239 Jy/beam
! Clean residual mean=0.000267 rms=0.012217 Jy/beam
! Combined flux in latest and established models = 1.44514 Jy
! Performing phase self-cal
! Adding 49 model components to the UV plane model.
! The established model now contains 344 components and 1.44514 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.431305Jy  sigma=2.004919
! Fit after  self-cal, rms=0.431047Jy  sigma=2.000762
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.431047Jy  sigma=2.000762
! Fit after  self-cal, rms=0.428826Jy  sigma=1.977960
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.67 mas, bmaj=20.27 mas, bpa=6.364 degrees
! Estimated noise=0.672107 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0009034 Jy
! Component: 100  -  total flux cleaned = 0.00768013 Jy
! Component: 150  -  total flux cleaned = 0.0158186 Jy
! Component: 200  -  total flux cleaned = 0.0209289 Jy
! Total flux subtracted in 200 components = 0.0209289 Jy
! Clean residual min=-0.044187 max=0.048907 Jy/beam
! Clean residual mean=0.000275 rms=0.013453 Jy/beam
! Combined flux in latest and established models = 1.46607 Jy
selfcal
! Performing phase self-cal
! Adding 41 model components to the UV plane model.
! The established model now contains 365 components and 1.46607 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.427684Jy  sigma=1.950699
! Fit after  self-cal, rms=0.428121Jy  sigma=1.946598
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00168752 Jy
! Component: 100  -  total flux cleaned = 0.00409651 Jy
! Component: 150  -  total flux cleaned = 0.00880741 Jy
! Component: 200  -  total flux cleaned = 0.0124036 Jy
! Total flux subtracted in 200 components = 0.0124036 Jy
! Clean residual min=-0.042657 max=0.046742 Jy/beam
! Clean residual mean=0.000271 rms=0.013155 Jy/beam
! Combined flux in latest and established models = 1.47847 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 379 components and 1.47847 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.427607Jy  sigma=1.930302
! Fit after  self-cal, rms=0.427714Jy  sigma=1.927323
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=6.901 mas, bmaj=17.9 mas, bpa=2.802 degrees
! Estimated noise=0.718692 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 6.901 x 17.9 at 2.802 degrees (North through East)
! Clean map  min=-0.076252  max=0.39142 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.726 mas, bmaj=16.35 mas, bpa=2.371 degrees
! Estimated noise=1.32105 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.32632 Jy
! Component: 100  -  total flux cleaned = 0.516917 Jy
! Component: 150  -  total flux cleaned = 0.660521 Jy
! Component: 200  -  total flux cleaned = 0.772781 Jy
! Total flux subtracted in 200 components = 0.772781 Jy
! Clean residual min=-0.086195 max=0.086561 Jy/beam
! Clean residual mean=-0.000077 rms=0.021858 Jy/beam
! Combined flux in latest and established models = 0.772781 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 81 model components to the UV plane model.
! The established model now contains 81 components and 0.772781 Jy
! Inverting map and beam 
! Estimated beam: bmin=6.901 mas, bmaj=17.9 mas, bpa=2.802 degrees
! Estimated noise=0.718692 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.139522 Jy
! Component: 100  -  total flux cleaned = 0.245232 Jy
! Component: 150  -  total flux cleaned = 0.310929 Jy
! Component: 200  -  total flux cleaned = 0.354769 Jy
! Total flux subtracted in 200 components = 0.354769 Jy
! Clean residual min=-0.080997 max=0.059344 Jy/beam
! Clean residual mean=0.000020 rms=0.018545 Jy/beam
! Combined flux in latest and established models = 1.12755 Jy
! Adding 113 model components to the UV plane model.
! The established model now contains 191 components and 1.12755 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.67 mas, bmaj=20.27 mas, bpa=6.364 degrees
! Estimated noise=0.672107 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0535811 Jy
! Component: 100  -  total flux cleaned = 0.0919934 Jy
! Component: 150  -  total flux cleaned = 0.12426 Jy
! Component: 200  -  total flux cleaned = 0.151692 Jy
! Total flux subtracted in 200 components = 0.151692 Jy
! Clean residual min=-0.070204 max=0.048801 Jy/beam
! Clean residual mean=0.000135 rms=0.017070 Jy/beam
! Combined flux in latest and established models = 1.27924 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0206339 Jy
! Component: 100  -  total flux cleaned = 0.0400819 Jy
! Component: 150  -  total flux cleaned = 0.0572023 Jy
! Component: 200  -  total flux cleaned = 0.0713971 Jy
! Total flux subtracted in 200 components = 0.0713971 Jy
! Clean residual min=-0.057132 max=0.046282 Jy/beam
! Clean residual mean=0.000188 rms=0.015080 Jy/beam
! Combined flux in latest and established models = 1.35064 Jy
! Adding 164 model components to the UV plane model.
! The established model now contains 326 components and 1.35064 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=6.901 mas, bmaj=17.9 mas, bpa=2.802 degrees
! Estimated noise=0.718692 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00322752 Jy
! Component: 100  -  total flux cleaned = 0.011198 Jy
! Component: 150  -  total flux cleaned = 0.0184092 Jy
! Component: 200  -  total flux cleaned = 0.0264038 Jy
! Total flux subtracted in 200 components = 0.0264038 Jy
! Clean residual min=-0.045457 max=0.040935 Jy/beam
! Clean residual mean=0.000168 rms=0.012319 Jy/beam
! Combined flux in latest and established models = 1.37704 Jy
selfcal
! Performing phase self-cal
! Adding 43 model components to the UV plane model.
! The established model now contains 366 components and 1.37704 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.433206Jy  sigma=1.995620
! Fit after  self-cal, rms=0.429423Jy  sigma=1.984007
wmodel J2206-1835_S_a_map.mod
! Writing 366 model components to file: J2206-1835_S_a_map.mod
wobs   J2206-1835_S_a_uvs.fits
! Writing UV FITS file: J2206-1835_S_a_uvs.fits
wwins  J2206-1835_S_a_map.win
! wwins: Wrote 3 windows to J2206-1835_S_a_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00356259 Jy
! Component: 100  -  total flux cleaned = 0.00347363 Jy
! Component: 150  -  total flux cleaned = 0.0101091 Jy
! Component: 200  -  total flux cleaned = 0.0138578 Jy
! Component: 250  -  total flux cleaned = 0.0191547 Jy
! Component: 300  -  total flux cleaned = 0.0219431 Jy
! Component: 350  -  total flux cleaned = 0.0235506 Jy
! Component: 400  -  total flux cleaned = 0.0240653 Jy
! Component: 450  -  total flux cleaned = 0.0240732 Jy
! Component: 500  -  total flux cleaned = 0.0250321 Jy
! Component: 550  -  total flux cleaned = 0.0254923 Jy
! Component: 600  -  total flux cleaned = 0.0272377 Jy
! Component: 650  -  total flux cleaned = 0.0268147 Jy
! Component: 700  -  total flux cleaned = 0.0292731 Jy
! Component: 750  -  total flux cleaned = 0.0296533 Jy
! Component: 800  -  total flux cleaned = 0.0304251 Jy
! Component: 850  -  total flux cleaned = 0.0311729 Jy
! Component: 900  -  total flux cleaned = 0.0322585 Jy
! Component: 950  -  total flux cleaned = 0.0318933 Jy
! Component: 1000  -  total flux cleaned = 0.0325889 Jy
! Component: 1050  -  total flux cleaned = 0.0325919 Jy
! Component: 1100  -  total flux cleaned = 0.0322659 Jy
! Component: 1150  -  total flux cleaned = 0.0316299 Jy
! Component: 1200  -  total flux cleaned = 0.0313234 Jy
! Component: 1250  -  total flux cleaned = 0.0319429 Jy
! Component: 1300  -  total flux cleaned = 0.0304346 Jy
! Component: 1350  -  total flux cleaned = 0.0304364 Jy
! Component: 1400  -  total flux cleaned = 0.0307165 Jy
! Component: 1450  -  total flux cleaned = 0.0307159 Jy
! Component: 1500  -  total flux cleaned = 0.0307171 Jy
! Component: 1550  -  total flux cleaned = 0.0298955 Jy
! Component: 1600  -  total flux cleaned = 0.029363 Jy
! Component: 1650  -  total flux cleaned = 0.0293698 Jy
! Component: 1700  -  total flux cleaned = 0.0288503 Jy
! Component: 1750  -  total flux cleaned = 0.0280874 Jy
! Component: 1800  -  total flux cleaned = 0.0270863 Jy
! Component: 1850  -  total flux cleaned = 0.0265957 Jy
! Component: 1900  -  total flux cleaned = 0.0265984 Jy
! Component: 1950  -  total flux cleaned = 0.0258818 Jy
! Component: 2000  -  total flux cleaned = 0.0263575 Jy
! Component: 2050  -  total flux cleaned = 0.0261265 Jy
! Component: 2100  -  total flux cleaned = 0.0263539 Jy
! Component: 2150  -  total flux cleaned = 0.0267998 Jy
! Component: 2200  -  total flux cleaned = 0.0263579 Jy
! Component: 2250  -  total flux cleaned = 0.027016 Jy
! Component: 2300  -  total flux cleaned = 0.0267991 Jy
! Component: 2350  -  total flux cleaned = 0.0276479 Jy
! Component: 2400  -  total flux cleaned = 0.0270166 Jy
! Component: 2450  -  total flux cleaned = 0.0268083 Jy
! Component: 2500  -  total flux cleaned = 0.0272133 Jy
! Component: 2550  -  total flux cleaned = 0.0260066 Jy
! Component: 2600  -  total flux cleaned = 0.0270044 Jy
! Component: 2650  -  total flux cleaned = 0.0274013 Jy
! Component: 2700  -  total flux cleaned = 0.0285683 Jy
! Component: 2750  -  total flux cleaned = 0.0279931 Jy
! Component: 2800  -  total flux cleaned = 0.0281856 Jy
! Component: 2850  -  total flux cleaned = 0.0285594 Jy
! Component: 2900  -  total flux cleaned = 0.0291115 Jy
! Component: 2950  -  total flux cleaned = 0.0296584 Jy
! Component: 3000  -  total flux cleaned = 0.0294701 Jy
! Component: 3050  -  total flux cleaned = 0.0298266 Jy
! Component: 3100  -  total flux cleaned = 0.0294756 Jy
! Component: 3150  -  total flux cleaned = 0.0299995 Jy
! Component: 3200  -  total flux cleaned = 0.0305171 Jy
! Component: 3250  -  total flux cleaned = 0.0305165 Jy
! Component: 3300  -  total flux cleaned = 0.0310269 Jy
! Component: 3350  -  total flux cleaned = 0.0311949 Jy
! Component: 3400  -  total flux cleaned = 0.0318585 Jy
! Component: 3450  -  total flux cleaned = 0.0316916 Jy
! Component: 3500  -  total flux cleaned = 0.0316946 Jy
! Component: 3550  -  total flux cleaned = 0.0325023 Jy
! Component: 3600  -  total flux cleaned = 0.0328208 Jy
! Component: 3650  -  total flux cleaned = 0.0325008 Jy
! Component: 3700  -  total flux cleaned = 0.0325005 Jy
! Component: 3750  -  total flux cleaned = 0.0332827 Jy
! Component: 3800  -  total flux cleaned = 0.0332837 Jy
! Component: 3850  -  total flux cleaned = 0.0342039 Jy
! Component: 3900  -  total flux cleaned = 0.0342044 Jy
! Component: 3950  -  total flux cleaned = 0.0346589 Jy
! Component: 4000  -  total flux cleaned = 0.0352565 Jy
! Component: 4050  -  total flux cleaned = 0.0354028 Jy
! Total flux subtracted in 4096 components = 0.0358437 Jy
! Clean residual min=-0.007631 max=0.007918 Jy/beam
! Clean residual mean=0.000003 rms=0.003511 Jy/beam
! Combined flux in latest and established models = 1.41289 Jy
keep
! Adding 484 model components to the UV plane model.
! The established model now contains 850 components and 1.41289 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J2206-1835_S_a_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 6.901 x 17.9 at 2.802 degrees (North through East)
! Clean map  min=-0.059493  max=0.41085 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J2206-1835_S_a_map.fits
wmodel /vlbi/uf001/uva//J2206-1835_S_a_map.mod
! Writing 850 model components to file: /vlbi/uf001/uva//J2206-1835_S_a_map.mod
wobs   /vlbi/uf001/uva//J2206-1835_S_a_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J2206-1835_S_a_uvs.fits
wwins  /vlbi/uf001/uva//J2206-1835_S_a_map.win
! wwins: Wrote 4 windows to /vlbi/uf001/uva//J2206-1835_S_a_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.410846 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00354411 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -2.58791 2.58791 5.17583 10.3517 20.7033 41.4066 82.8133
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0106 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.41 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  115.923 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J2206-1835_S_a_dfm.log closed on Mon Jan 14 06:08:05 2019