! Started logfile: /vlbi/uf001/uva//J2204+3632_S_dfm.log on Mon Jan 14 06:07:04 2019 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /vlbi/uf001/uva//J2204+3632_S_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J2204+3632_S_uva.fits ! AN table 1: 57 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.991423 visibilities/baseline/integration-bin. ! Found source: J2204+3632 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 44 lines of history. ! ! Reading 7629 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J2204+3632_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=1.004987Jy sigma=25.669944 ! Fit after self-cal, rms=0.910942Jy sigma=23.369486 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.927 mas, bmaj=5.649 mas, bpa=-6.876 degrees ! Estimated noise=0.494664 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0684331 Jy ! Component: 100 - total flux cleaned = 0.0838176 Jy ! Total flux subtracted in 100 components = 0.0838176 Jy ! Clean residual min=-0.003992 max=0.005349 Jy/beam ! Clean residual mean=-0.000003 rms=0.000953 Jy/beam ! Combined flux in latest and established models = 0.0838176 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.0838176 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.062176Jy sigma=1.350679 ! Fit after self-cal, rms=0.062157Jy sigma=1.350261 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.525 mas, bmaj=6.268 mas, bpa=-6.101 degrees ! Estimated noise=0.327374 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00564363 Jy ! Component: 100 - total flux cleaned = 0.00769897 Jy ! Component: 150 - total flux cleaned = 0.00820757 Jy ! Component: 200 - total flux cleaned = 0.00842266 Jy ! Total flux subtracted in 200 components = 0.00842266 Jy ! Clean residual min=-0.002504 max=0.002534 Jy/beam ! Clean residual mean=-0.000000 rms=0.000599 Jy/beam ! Combined flux in latest and established models = 0.0922403 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 21 components and 0.0922403 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.061453Jy sigma=1.338782 ! Fit after self-cal, rms=0.061452Jy sigma=1.338655 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.525 x 6.268 at -6.101 degrees (North through East) ! Clean map min=-0.0024078 max=0.088824 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.98 HN 1.01 KP 0.97 ! LA 1.00 MK 1.03 NL 1.00 OV 0.99 ! PT 1.06 SC 1.03 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00 HN 1.00 KP 0.99 ! LA 0.98 MK 1.00 NL 0.99 OV 0.94 ! PT 1.04 SC 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.96 HN 1.01 KP 1.00 ! LA 1.02 MK 1.00 NL 1.01 OV 1.01 ! PT 1.02 SC 0.97 ! ! ! Fit before self-cal, rms=0.061452Jy sigma=1.338655 ! Fit after self-cal, rms=0.062381Jy sigma=1.336095 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.535 mas, bmaj=6.29 mas, bpa=-6.204 degrees ! Estimated noise=0.32942 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000200952 Jy ! Component: 100 - total flux cleaned = 0.000261298 Jy ! Component: 150 - total flux cleaned = 0.000305628 Jy ! Component: 200 - total flux cleaned = 0.000287097 Jy ! Total flux subtracted in 200 components = 0.000287097 Jy ! Clean residual min=-0.002185 max=0.002239 Jy/beam ! Clean residual mean=0.000001 rms=0.000584 Jy/beam ! Combined flux in latest and established models = 0.0925274 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 28 components and 0.0925274 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.062310Jy sigma=1.335982 ! Fit after self-cal, rms=0.062317Jy sigma=1.335908 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.062317Jy sigma=1.335908 ! Fit after self-cal, rms=0.055426Jy sigma=1.317057 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.549 mas, bmaj=6.238 mas, bpa=-5.868 degrees ! Estimated noise=0.32873 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000310799 Jy ! Component: 100 - total flux cleaned = 0.000277687 Jy ! Component: 150 - total flux cleaned = 0.000250748 Jy ! Component: 200 - total flux cleaned = 0.000228568 Jy ! Total flux subtracted in 200 components = 0.000228568 Jy ! Clean residual min=-0.001554 max=0.001783 Jy/beam ! Clean residual mean=0.000002 rms=0.000413 Jy/beam ! Combined flux in latest and established models = 0.0927559 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 37 components and 0.0927559 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.055414Jy sigma=1.316869 ! Fit after self-cal, rms=0.055406Jy sigma=1.316592 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (70, -46). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00132285 Jy ! Component: 100 - total flux cleaned = 0.00135298 Jy ! Component: 150 - total flux cleaned = 0.00140713 Jy ! Component: 200 - total flux cleaned = 0.00145242 Jy ! Total flux subtracted in 200 components = 0.00145242 Jy ! Clean residual min=-0.001504 max=0.001588 Jy/beam ! Clean residual mean=0.000003 rms=0.000401 Jy/beam ! Combined flux in latest and established models = 0.0942084 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 56 components and 0.0942084 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.055355Jy sigma=1.315479 ! Fit after self-cal, rms=0.055351Jy sigma=1.315400 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.055351Jy sigma=1.315400 ! Fit after self-cal, rms=0.055315Jy sigma=1.315325 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.549 mas, bmaj=6.223 mas, bpa=-5.767 degrees ! Estimated noise=0.328495 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000430904 Jy ! Component: 100 - total flux cleaned = 0.000411953 Jy ! Component: 150 - total flux cleaned = 0.000393687 Jy ! Component: 200 - total flux cleaned = 0.000393466 Jy ! Total flux subtracted in 200 components = 0.000393466 Jy ! Clean residual min=-0.001506 max=0.001577 Jy/beam ! Clean residual mean=0.000002 rms=0.000396 Jy/beam ! Combined flux in latest and established models = 0.0946018 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 63 components and 0.0946018 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.055300Jy sigma=1.315018 ! Fit after self-cal, rms=0.055299Jy sigma=1.315008 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.60452e-05 Jy ! Component: 100 - total flux cleaned = 3.97265e-05 Jy ! Component: 150 - total flux cleaned = 9.27206e-06 Jy ! Component: 200 - total flux cleaned = 9.92435e-06 Jy ! Total flux subtracted in 200 components = 9.92435e-06 Jy ! Clean residual min=-0.001507 max=0.001574 Jy/beam ! Clean residual mean=0.000002 rms=0.000394 Jy/beam ! Combined flux in latest and established models = 0.0946117 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 67 components and 0.0946118 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.055291Jy sigma=1.314828 ! Fit after self-cal, rms=0.055291Jy sigma=1.314826 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.055291Jy sigma=1.314826 ! Fit after self-cal, rms=0.055313Jy sigma=1.314807 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.4 mas, bmaj=9.609 mas, bpa=-4.442 degrees ! Estimated noise=0.407603 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.09637e-05 Jy ! Component: 100 - total flux cleaned = 4.11348e-05 Jy ! Component: 150 - total flux cleaned = 7.29015e-05 Jy ! Component: 200 - total flux cleaned = 8.15432e-05 Jy ! Total flux subtracted in 200 components = 8.15432e-05 Jy ! Clean residual min=-0.001826 max=0.001733 Jy/beam ! Clean residual mean=0.000005 rms=0.000497 Jy/beam ! Combined flux in latest and established models = 0.0946933 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 73 components and 0.0946933 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.055313Jy sigma=1.314764 ! Fit after self-cal, rms=0.055312Jy sigma=1.314748 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.19234e-05 Jy ! Component: 100 - total flux cleaned = -3.95853e-05 Jy ! Component: 150 - total flux cleaned = -4.65171e-05 Jy ! Component: 200 - total flux cleaned = -5.27827e-05 Jy ! Total flux subtracted in 200 components = -5.27827e-05 Jy ! Clean residual min=-0.001823 max=0.001723 Jy/beam ! Clean residual mean=0.000005 rms=0.000496 Jy/beam ! Combined flux in latest and established models = 0.0946405 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 78 components and 0.0946405 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.055313Jy sigma=1.314763 ! Fit after self-cal, rms=0.055312Jy sigma=1.314753 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.548 mas, bmaj=6.219 mas, bpa=-5.788 degrees ! Estimated noise=0.328589 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.548 x 6.219 at -5.788 degrees (North through East) ! Clean map min=-0.0014555 max=0.089193 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.957 mas, bmaj=5.599 mas, bpa=-6.656 degrees ! Estimated noise=0.495611 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0685296 Jy ! Component: 100 - total flux cleaned = 0.0837939 Jy ! Component: 150 - total flux cleaned = 0.0890108 Jy ! Component: 200 - total flux cleaned = 0.0911645 Jy ! Total flux subtracted in 200 components = 0.0911645 Jy ! Clean residual min=-0.002608 max=0.002920 Jy/beam ! Clean residual mean=0.000000 rms=0.000653 Jy/beam ! Combined flux in latest and established models = 0.0911646 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.0911646 Jy ! Inverting map and beam ! Estimated beam: bmin=3.548 mas, bmaj=6.219 mas, bpa=-5.788 degrees ! Estimated noise=0.328589 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00203068 Jy ! Component: 100 - total flux cleaned = 0.00282964 Jy ! Component: 150 - total flux cleaned = 0.00312358 Jy ! Component: 200 - total flux cleaned = 0.00315799 Jy ! Total flux subtracted in 200 components = 0.00315799 Jy ! Clean residual min=-0.001605 max=0.001701 Jy/beam ! Clean residual mean=0.000002 rms=0.000406 Jy/beam ! Combined flux in latest and established models = 0.0943225 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 38 components and 0.0943225 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.4 mas, bmaj=9.609 mas, bpa=-4.442 degrees ! Estimated noise=0.407603 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.77348e-06 Jy ! Component: 100 - total flux cleaned = 5.4071e-05 Jy ! Component: 150 - total flux cleaned = 9.00586e-05 Jy ! Component: 200 - total flux cleaned = 0.000132046 Jy ! Total flux subtracted in 200 components = 0.000132046 Jy ! Clean residual min=-0.001835 max=0.001726 Jy/beam ! Clean residual mean=0.000005 rms=0.000500 Jy/beam ! Combined flux in latest and established models = 0.0944546 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.53175e-05 Jy ! Component: 100 - total flux cleaned = 6.62485e-05 Jy ! Component: 150 - total flux cleaned = 7.54542e-05 Jy ! Component: 200 - total flux cleaned = 6.70116e-05 Jy ! Total flux subtracted in 200 components = 6.70116e-05 Jy ! Clean residual min=-0.001825 max=0.001717 Jy/beam ! Clean residual mean=0.000005 rms=0.000498 Jy/beam ! Combined flux in latest and established models = 0.0945216 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 62 components and 0.0945216 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.548 mas, bmaj=6.219 mas, bpa=-5.788 degrees ! Estimated noise=0.328589 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.10281e-05 Jy ! Component: 100 - total flux cleaned = 5.38839e-05 Jy ! Component: 150 - total flux cleaned = 7.51463e-05 Jy ! Component: 200 - total flux cleaned = 7.50083e-05 Jy ! Total flux subtracted in 200 components = 7.50083e-05 Jy ! Clean residual min=-0.001526 max=0.001631 Jy/beam ! Clean residual mean=0.000002 rms=0.000397 Jy/beam ! Combined flux in latest and established models = 0.0945966 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 81 components and 0.0945966 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.055328Jy sigma=1.315229 ! Fit after self-cal, rms=0.055328Jy sigma=1.315200 wmodel J2204+3632_S_map.mod ! Writing 81 model components to file: J2204+3632_S_map.mod wobs J2204+3632_S_uvs.fits ! Writing UV FITS file: J2204+3632_S_uvs.fits wwins J2204+3632_S_map.win ! wwins: Wrote 2 windows to J2204+3632_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000128294 Jy ! Component: 100 - total flux cleaned = 0.000211161 Jy ! Component: 150 - total flux cleaned = 0.000420658 Jy ! Component: 200 - total flux cleaned = 0.000546195 Jy ! Component: 250 - total flux cleaned = 0.000618377 Jy ! Component: 300 - total flux cleaned = 0.000571319 Jy ! Component: 350 - total flux cleaned = 0.000479422 Jy ! Component: 400 - total flux cleaned = 0.000456357 Jy ! Component: 450 - total flux cleaned = 0.00034623 Jy ! Component: 500 - total flux cleaned = 0.000346611 Jy ! Component: 550 - total flux cleaned = 0.000282907 Jy ! Component: 600 - total flux cleaned = 0.000345533 Jy ! Component: 650 - total flux cleaned = 0.000283442 Jy ! Component: 700 - total flux cleaned = 0.000344353 Jy ! Component: 750 - total flux cleaned = 0.000323853 Jy ! Component: 800 - total flux cleaned = 0.000245222 Jy ! Component: 850 - total flux cleaned = 0.000226028 Jy ! Component: 900 - total flux cleaned = 0.00018758 Jy ! Component: 950 - total flux cleaned = 0.000130767 Jy ! Component: 1000 - total flux cleaned = -1.80238e-05 Jy ! Component: 1050 - total flux cleaned = -7.29946e-05 Jy ! Component: 1100 - total flux cleaned = -0.000163776 Jy ! Component: 1150 - total flux cleaned = -0.000253346 Jy ! Component: 1200 - total flux cleaned = -0.000324443 Jy ! Component: 1250 - total flux cleaned = -0.000411867 Jy ! Component: 1300 - total flux cleaned = -0.00053318 Jy ! Component: 1350 - total flux cleaned = -0.000566966 Jy ! Component: 1400 - total flux cleaned = -0.000583997 Jy ! Component: 1450 - total flux cleaned = -0.000667833 Jy ! Component: 1500 - total flux cleaned = -0.000750887 Jy ! Component: 1550 - total flux cleaned = -0.000849362 Jy ! Component: 1600 - total flux cleaned = -0.000897886 Jy ! Component: 1650 - total flux cleaned = -0.000865696 Jy ! Component: 1700 - total flux cleaned = -0.000865682 Jy ! Component: 1750 - total flux cleaned = -0.000944839 Jy ! Component: 1800 - total flux cleaned = -0.000975998 Jy ! Component: 1850 - total flux cleaned = -0.000913798 Jy ! Component: 1900 - total flux cleaned = -0.000944404 Jy ! Component: 1950 - total flux cleaned = -0.000852992 Jy ! Component: 2000 - total flux cleaned = -0.000838091 Jy ! Component: 2050 - total flux cleaned = -0.000883161 Jy ! Component: 2100 - total flux cleaned = -0.000823667 Jy ! Component: 2150 - total flux cleaned = -0.000809043 Jy ! Component: 2200 - total flux cleaned = -0.000809256 Jy ! Component: 2250 - total flux cleaned = -0.000809012 Jy ! Component: 2300 - total flux cleaned = -0.000823154 Jy ! Component: 2350 - total flux cleaned = -0.00073762 Jy ! Component: 2400 - total flux cleaned = -0.000780203 Jy ! Component: 2450 - total flux cleaned = -0.000738259 Jy ! Component: 2500 - total flux cleaned = -0.000724348 Jy ! Component: 2550 - total flux cleaned = -0.000724455 Jy ! Component: 2600 - total flux cleaned = -0.000738038 Jy ! Component: 2650 - total flux cleaned = -0.000697068 Jy ! Component: 2700 - total flux cleaned = -0.000616017 Jy ! Component: 2750 - total flux cleaned = -0.000643039 Jy ! Component: 2800 - total flux cleaned = -0.000616594 Jy ! Component: 2850 - total flux cleaned = -0.000603499 Jy ! Component: 2900 - total flux cleaned = -0.000564108 Jy ! Component: 2950 - total flux cleaned = -0.000564075 Jy ! Component: 3000 - total flux cleaned = -0.000576929 Jy ! Component: 3050 - total flux cleaned = -0.000551182 Jy ! Component: 3100 - total flux cleaned = -0.000512795 Jy ! Component: 3150 - total flux cleaned = -0.000462186 Jy ! Component: 3200 - total flux cleaned = -0.000449475 Jy ! Component: 3250 - total flux cleaned = -0.000449418 Jy ! Component: 3300 - total flux cleaned = -0.000399722 Jy ! Component: 3350 - total flux cleaned = -0.000362774 Jy ! Component: 3400 - total flux cleaned = -0.000313944 Jy ! Component: 3450 - total flux cleaned = -0.000277549 Jy ! Component: 3500 - total flux cleaned = -0.000253511 Jy ! Component: 3550 - total flux cleaned = -0.000205521 Jy ! Component: 3600 - total flux cleaned = -0.000229326 Jy ! Component: 3650 - total flux cleaned = -0.000170039 Jy ! Component: 3700 - total flux cleaned = -0.000146529 Jy ! Component: 3750 - total flux cleaned = -0.000123114 Jy ! Component: 3800 - total flux cleaned = -9.9836e-05 Jy ! Component: 3850 - total flux cleaned = -9.98753e-05 Jy ! Component: 3900 - total flux cleaned = -1.95486e-05 Jy ! Component: 3950 - total flux cleaned = -4.22963e-05 Jy ! Component: 4000 - total flux cleaned = -1.96301e-05 Jy ! Component: 4050 - total flux cleaned = 4.78201e-05 Jy ! Total flux subtracted in 4096 components = 8.13394e-05 Jy ! Clean residual min=-0.000667 max=0.000622 Jy/beam ! Clean residual mean=0.000001 rms=0.000205 Jy/beam ! Combined flux in latest and established models = 0.094678 Jy keep ! Adding 291 model components to the UV plane model. ! The established model now contains 372 components and 0.094678 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J2204+3632_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.548 x 6.219 at -5.788 degrees (North through East) ! Clean map min=-0.0011285 max=0.089123 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J2204+3632_S_map.fits wmodel /vlbi/uf001/uva//J2204+3632_S_map.mod ! Writing 372 model components to file: /vlbi/uf001/uva//J2204+3632_S_map.mod wobs /vlbi/uf001/uva//J2204+3632_S_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J2204+3632_S_uvs.fits wwins /vlbi/uf001/uva//J2204+3632_S_map.win ! wwins: Wrote 3 windows to /vlbi/uf001/uva//J2204+3632_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0891232 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000205023 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.690132 0.690132 1.38026 2.76053 5.52106 11.0421 22.0842 44.1685 88.3369 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.089 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 434.699 quit ! Quitting program ! Log file /vlbi/uf001/uva//J2204+3632_S_dfm.log closed on Mon Jan 14 06:07:08 2019