! Started logfile: /vlbi/uf001/uva//J2202-2335_S_dfm.log on Mon Jan 14 06:05:51 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J2202-2335_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J2202-2335_S_uva.fits
! AN table 1: 38 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.980117 visibilities/baseline/integration-bin.
! Found source: J2202-2335
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 5028 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J2202-2335_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 33 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 33 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 33 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.028515Jy  sigma=18.147897
! Fit after  self-cal, rms=0.797154Jy  sigma=13.853442
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.448 mas, bmaj=7.188 mas, bpa=-3.543 degrees
! Estimated noise=0.85493 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.154247 Jy
! Component: 100  -  total flux cleaned = 0.207985 Jy
! Total flux subtracted in 100 components = 0.207985 Jy
! Clean residual min=-0.011615 max=0.023605 Jy/beam
! Clean residual mean=-0.000080 rms=0.003314 Jy/beam
! Combined flux in latest and established models = 0.207985 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.207985 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.097447Jy  sigma=1.631416
! Fit after  self-cal, rms=0.097151Jy  sigma=1.626709
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0266401 Jy
! Component: 100  -  total flux cleaned = 0.0409056 Jy
! Total flux subtracted in 100 components = 0.0409056 Jy
! Clean residual min=-0.007558 max=0.016927 Jy/beam
! Clean residual mean=-0.000053 rms=0.002350 Jy/beam
! Combined flux in latest and established models = 0.24889 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 25 components and 0.24889 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.088292Jy  sigma=1.416032
! Fit after  self-cal, rms=0.088263Jy  sigma=1.415402
! Inverting map 
! Added new window around map position (4, -5.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.016092 Jy
! Component: 100  -  total flux cleaned = 0.0255224 Jy
! Total flux subtracted in 100 components = 0.0255224 Jy
! Clean residual min=-0.006841 max=0.010056 Jy/beam
! Clean residual mean=-0.000038 rms=0.001877 Jy/beam
! Combined flux in latest and established models = 0.274413 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 35 components and 0.274413 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.084743Jy  sigma=1.346957
! Fit after  self-cal, rms=0.084426Jy  sigma=1.340275
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.982 mas, bmaj=7.889 mas, bpa=-3.66 degrees
! Estimated noise=0.609025 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0101119 Jy
! Component: 100  -  total flux cleaned = 0.0161914 Jy
! Component: 150  -  total flux cleaned = 0.0202095 Jy
! Component: 200  -  total flux cleaned = 0.0229289 Jy
! Total flux subtracted in 200 components = 0.0229289 Jy
! Clean residual min=-0.005856 max=0.007790 Jy/beam
! Clean residual mean=-0.000042 rms=0.001582 Jy/beam
! Combined flux in latest and established models = 0.297342 Jy
! Performing phase self-cal
! Adding 41 model components to the UV plane model.
! The established model now contains 70 components and 0.297342 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.083190Jy  sigma=1.313327
! Fit after  self-cal, rms=0.083140Jy  sigma=1.311556
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.982 x 7.889 at -3.66 degrees (North through East)
! Clean map  min=-0.0053017  max=0.19796 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.97     HN        1.12     KP        0.99     
!   LA        0.93     MK        1.00     NL        1.07     OV        0.97     
!   PT        0.97     SC        0.96     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.18     FD        0.97     HN        1.05     KP        1.00     
!   LA        0.92     MK        0.99     NL        1.10     OV        1.00     
!   PT        0.99     SC        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.99     HN        1.11     KP        0.99     
!   LA        0.93     MK        0.99     NL        1.04     OV        0.97     
!   PT        0.98     SC        0.96     
! 
! 
! Fit before self-cal, rms=0.083140Jy  sigma=1.311556
! Fit after  self-cal, rms=0.083585Jy  sigma=1.281199
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.981 mas, bmaj=7.863 mas, bpa=-3.3 degrees
! Estimated noise=0.607285 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00181635 Jy
! Component: 100  -  total flux cleaned = -0.00216505 Jy
! Component: 150  -  total flux cleaned = -0.00230904 Jy
! Component: 200  -  total flux cleaned = -0.00243611 Jy
! Total flux subtracted in 200 components = -0.00243611 Jy
! Clean residual min=-0.004303 max=0.004204 Jy/beam
! Clean residual mean=-0.000001 rms=0.001126 Jy/beam
! Combined flux in latest and established models = 0.294906 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 82 components and 0.294905 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.083471Jy  sigma=1.280070
! Fit after  self-cal, rms=0.083529Jy  sigma=1.279803
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.083529Jy  sigma=1.279803
! Fit after  self-cal, rms=0.085783Jy  sigma=1.263653
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.979 mas, bmaj=7.853 mas, bpa=-3.339 degrees
! Estimated noise=0.607228 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00145065 Jy
! Component: 100  -  total flux cleaned = -0.00167264 Jy
! Component: 150  -  total flux cleaned = -0.00185439 Jy
! Component: 200  -  total flux cleaned = -0.00198066 Jy
! Total flux subtracted in 200 components = -0.00198066 Jy
! Clean residual min=-0.003119 max=0.003494 Jy/beam
! Clean residual mean=-0.000003 rms=0.000901 Jy/beam
! Combined flux in latest and established models = 0.292925 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 91 components and 0.292925 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.085740Jy  sigma=1.262814
! Fit after  self-cal, rms=0.085767Jy  sigma=1.262735
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000252223 Jy
! Component: 100  -  total flux cleaned = -0.000335312 Jy
! Component: 150  -  total flux cleaned = -0.000411762 Jy
! Component: 200  -  total flux cleaned = -0.000458515 Jy
! Total flux subtracted in 200 components = -0.000458515 Jy
! Clean residual min=-0.003096 max=0.003481 Jy/beam
! Clean residual mean=-0.000003 rms=0.000897 Jy/beam
! Combined flux in latest and established models = 0.292466 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 95 components and 0.292466 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.085761Jy  sigma=1.262382
! Fit after  self-cal, rms=0.085758Jy  sigma=1.262372
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.085758Jy  sigma=1.262372
! Fit after  self-cal, rms=0.090831Jy  sigma=1.258882
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.975 mas, bmaj=7.843 mas, bpa=-3.351 degrees
! Estimated noise=0.606972 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00103392 Jy
! Component: 100  -  total flux cleaned = -0.00118053 Jy
! Component: 150  -  total flux cleaned = -0.00127779 Jy
! Component: 200  -  total flux cleaned = -0.00136523 Jy
! Total flux subtracted in 200 components = -0.00136523 Jy
! Clean residual min=-0.002981 max=0.003445 Jy/beam
! Clean residual mean=-0.000005 rms=0.000822 Jy/beam
! Combined flux in latest and established models = 0.291101 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 105 components and 0.291101 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.090803Jy  sigma=1.258309
! Fit after  self-cal, rms=0.090837Jy  sigma=1.258251
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000246907 Jy
! Component: 100  -  total flux cleaned = -0.000295395 Jy
! Component: 150  -  total flux cleaned = -0.000339568 Jy
! Component: 200  -  total flux cleaned = -0.000359648 Jy
! Total flux subtracted in 200 components = -0.000359648 Jy
! Clean residual min=-0.002936 max=0.003445 Jy/beam
! Clean residual mean=-0.000005 rms=0.000818 Jy/beam
! Combined flux in latest and established models = 0.290741 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 114 components and 0.290741 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.090828Jy  sigma=1.258006
! Fit after  self-cal, rms=0.090825Jy  sigma=1.257991
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.090825Jy  sigma=1.257991
! Fit after  self-cal, rms=0.091387Jy  sigma=1.257826
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.597 mas, bmaj=17.83 mas, bpa=1.582 degrees
! Estimated noise=0.789344 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.32366e-07 Jy
! Component: 100  -  total flux cleaned = 1.96406e-05 Jy
! Component: 150  -  total flux cleaned = 3.79211e-05 Jy
! Component: 200  -  total flux cleaned = 7.21901e-05 Jy
! Total flux subtracted in 200 components = 7.21901e-05 Jy
! Clean residual min=-0.002900 max=0.004975 Jy/beam
! Clean residual mean=-0.000009 rms=0.001170 Jy/beam
! Combined flux in latest and established models = 0.290814 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 121 components and 0.290814 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.091381Jy  sigma=1.257653
! Fit after  self-cal, rms=0.091383Jy  sigma=1.257627
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (14.5, -12.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00450548 Jy
! Component: 100  -  total flux cleaned = 0.00687809 Jy
! Component: 150  -  total flux cleaned = 0.00782314 Jy
! Component: 200  -  total flux cleaned = 0.00826568 Jy
! Total flux subtracted in 200 components = 0.00826568 Jy
! Clean residual min=-0.002847 max=0.002911 Jy/beam
! Clean residual mean=0.000010 rms=0.000900 Jy/beam
! Combined flux in latest and established models = 0.299079 Jy
! Performing phase self-cal
! Adding 58 model components to the UV plane model.
! The established model now contains 179 components and 0.299079 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.091235Jy  sigma=1.254172
! Fit after  self-cal, rms=0.091233Jy  sigma=1.254007
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.973 mas, bmaj=7.839 mas, bpa=-3.363 degrees
! Estimated noise=0.606448 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.973 x 7.839 at -3.363 degrees (North through East)
! Clean map  min=-0.0027797  max=0.19866 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.437 mas, bmaj=7.111 mas, bpa=-3.157 degrees
! Estimated noise=0.855998 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.155075 Jy
! Component: 100  -  total flux cleaned = 0.209969 Jy
! Component: 150  -  total flux cleaned = 0.236705 Jy
! Component: 200  -  total flux cleaned = 0.252966 Jy
! Total flux subtracted in 200 components = 0.252966 Jy
! Clean residual min=-0.005912 max=0.008678 Jy/beam
! Clean residual mean=-0.000027 rms=0.001634 Jy/beam
! Combined flux in latest and established models = 0.252966 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 36 model components to the UV plane model.
! The established model now contains 36 components and 0.252966 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.973 mas, bmaj=7.839 mas, bpa=-3.363 degrees
! Estimated noise=0.606448 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.014442 Jy
! Component: 100  -  total flux cleaned = 0.0225674 Jy
! Component: 150  -  total flux cleaned = 0.0277446 Jy
! Component: 200  -  total flux cleaned = 0.031647 Jy
! Total flux subtracted in 200 components = 0.031647 Jy
! Clean residual min=-0.002882 max=0.003434 Jy/beam
! Clean residual mean=-0.000011 rms=0.000838 Jy/beam
! Combined flux in latest and established models = 0.284613 Jy
! Adding 56 model components to the UV plane model.
! The established model now contains 85 components and 0.284613 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.597 mas, bmaj=17.83 mas, bpa=1.582 degrees
! Estimated noise=0.789344 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00475234 Jy
! Component: 100  -  total flux cleaned = 0.00795261 Jy
! Component: 150  -  total flux cleaned = 0.0103451 Jy
! Component: 200  -  total flux cleaned = 0.0122059 Jy
! Total flux subtracted in 200 components = 0.0122059 Jy
! Clean residual min=-0.002787 max=0.002810 Jy/beam
! Clean residual mean=0.000004 rms=0.000929 Jy/beam
! Combined flux in latest and established models = 0.296819 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00115161 Jy
! Component: 100  -  total flux cleaned = 0.00186973 Jy
! Component: 150  -  total flux cleaned = 0.00236291 Jy
! Component: 200  -  total flux cleaned = 0.00272248 Jy
! Total flux subtracted in 200 components = 0.00272248 Jy
! Clean residual min=-0.002686 max=0.002946 Jy/beam
! Clean residual mean=0.000011 rms=0.000864 Jy/beam
! Combined flux in latest and established models = 0.299541 Jy
! Adding 108 model components to the UV plane model.
! The established model now contains 192 components and 0.299541 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.973 mas, bmaj=7.839 mas, bpa=-3.363 degrees
! Estimated noise=0.606448 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000143628 Jy
! Component: 100  -  total flux cleaned = 0.000408752 Jy
! Component: 150  -  total flux cleaned = 0.000468136 Jy
! Component: 200  -  total flux cleaned = 0.000574282 Jy
! Total flux subtracted in 200 components = 0.000574282 Jy
! Clean residual min=-0.002587 max=0.002799 Jy/beam
! Clean residual mean=0.000007 rms=0.000643 Jy/beam
! Combined flux in latest and established models = 0.300115 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 218 components and 0.300115 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.091161Jy  sigma=1.251387
! Fit after  self-cal, rms=0.091139Jy  sigma=1.251181
wmodel J2202-2335_S_map.mod
! Writing 218 model components to file: J2202-2335_S_map.mod
wobs   J2202-2335_S_uvs.fits
! Writing UV FITS file: J2202-2335_S_uvs.fits
wwins  J2202-2335_S_map.win
! wwins: Wrote 3 windows to J2202-2335_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000878641 Jy
! Component: 100  -  total flux cleaned = 0.00101424 Jy
! Component: 150  -  total flux cleaned = 0.00101331 Jy
! Component: 200  -  total flux cleaned = 0.00109274 Jy
! Component: 250  -  total flux cleaned = 0.00128553 Jy
! Component: 300  -  total flux cleaned = 0.00154604 Jy
! Component: 350  -  total flux cleaned = 0.00165473 Jy
! Component: 400  -  total flux cleaned = 0.00172439 Jy
! Component: 450  -  total flux cleaned = 0.00175787 Jy
! Component: 500  -  total flux cleaned = 0.00179071 Jy
! Component: 550  -  total flux cleaned = 0.00185507 Jy
! Component: 600  -  total flux cleaned = 0.00198051 Jy
! Component: 650  -  total flux cleaned = 0.00201066 Jy
! Component: 700  -  total flux cleaned = 0.0021011 Jy
! Component: 750  -  total flux cleaned = 0.00227776 Jy
! Component: 800  -  total flux cleaned = 0.00242246 Jy
! Component: 850  -  total flux cleaned = 0.00259268 Jy
! Component: 900  -  total flux cleaned = 0.00264863 Jy
! Component: 950  -  total flux cleaned = 0.00278629 Jy
! Component: 1000  -  total flux cleaned = 0.00286773 Jy
! Component: 1050  -  total flux cleaned = 0.00294764 Jy
! Component: 1100  -  total flux cleaned = 0.00294772 Jy
! Component: 1150  -  total flux cleaned = 0.00299959 Jy
! Component: 1200  -  total flux cleaned = 0.0030249 Jy
! Component: 1250  -  total flux cleaned = 0.00310039 Jy
! Component: 1300  -  total flux cleaned = 0.00322428 Jy
! Component: 1350  -  total flux cleaned = 0.00329792 Jy
! Component: 1400  -  total flux cleaned = 0.00339473 Jy
! Component: 1450  -  total flux cleaned = 0.00346679 Jy
! Component: 1500  -  total flux cleaned = 0.00349038 Jy
! Component: 1550  -  total flux cleaned = 0.00351381 Jy
! Component: 1600  -  total flux cleaned = 0.00355975 Jy
! Component: 1650  -  total flux cleaned = 0.00362837 Jy
! Component: 1700  -  total flux cleaned = 0.00371912 Jy
! Component: 1750  -  total flux cleaned = 0.003742 Jy
! Component: 1800  -  total flux cleaned = 0.0038304 Jy
! Component: 1850  -  total flux cleaned = 0.00385263 Jy
! Component: 1900  -  total flux cleaned = 0.00402648 Jy
! Component: 1950  -  total flux cleaned = 0.00404799 Jy
! Component: 2000  -  total flux cleaned = 0.00404801 Jy
! Component: 2050  -  total flux cleaned = 0.0041535 Jy
! Component: 2100  -  total flux cleaned = 0.00421617 Jy
! Component: 2150  -  total flux cleaned = 0.00425756 Jy
! Component: 2200  -  total flux cleaned = 0.00427795 Jy
! Component: 2250  -  total flux cleaned = 0.00435938 Jy
! Component: 2300  -  total flux cleaned = 0.00445989 Jy
! Component: 2350  -  total flux cleaned = 0.00447964 Jy
! Component: 2400  -  total flux cleaned = 0.00451921 Jy
! Component: 2450  -  total flux cleaned = 0.0045586 Jy
! Component: 2500  -  total flux cleaned = 0.00463632 Jy
! Component: 2550  -  total flux cleaned = 0.0046747 Jy
! Component: 2600  -  total flux cleaned = 0.00475081 Jy
! Component: 2650  -  total flux cleaned = 0.00475084 Jy
! Component: 2700  -  total flux cleaned = 0.00480715 Jy
! Component: 2750  -  total flux cleaned = 0.00488145 Jy
! Component: 2800  -  total flux cleaned = 0.00493676 Jy
! Component: 2850  -  total flux cleaned = 0.00499155 Jy
! Component: 2900  -  total flux cleaned = 0.0049917 Jy
! Component: 2950  -  total flux cleaned = 0.00513583 Jy
! Component: 3000  -  total flux cleaned = 0.00515375 Jy
! Component: 3050  -  total flux cleaned = 0.00529534 Jy
! Component: 3100  -  total flux cleaned = 0.00531266 Jy
! Component: 3150  -  total flux cleaned = 0.00539981 Jy
! Component: 3200  -  total flux cleaned = 0.00546894 Jy
! Component: 3250  -  total flux cleaned = 0.00546905 Jy
! Component: 3300  -  total flux cleaned = 0.00557134 Jy
! Component: 3350  -  total flux cleaned = 0.00560524 Jy
! Component: 3400  -  total flux cleaned = 0.00565553 Jy
! Component: 3450  -  total flux cleaned = 0.00578865 Jy
! Component: 3500  -  total flux cleaned = 0.00585462 Jy
! Component: 3550  -  total flux cleaned = 0.00593672 Jy
! Component: 3600  -  total flux cleaned = 0.00592039 Jy
! Component: 3650  -  total flux cleaned = 0.00603375 Jy
! Component: 3700  -  total flux cleaned = 0.00603387 Jy
! Component: 3750  -  total flux cleaned = 0.00606586 Jy
! Component: 3800  -  total flux cleaned = 0.00616116 Jy
! Component: 3850  -  total flux cleaned = 0.0062244 Jy
! Component: 3900  -  total flux cleaned = 0.00628701 Jy
! Component: 3950  -  total flux cleaned = 0.00633374 Jy
! Component: 4000  -  total flux cleaned = 0.00639565 Jy
! Component: 4050  -  total flux cleaned = 0.00642636 Jy
! Total flux subtracted in 4096 components = 0.00650277 Jy
! Clean residual min=-0.000904 max=0.001054 Jy/beam
! Clean residual mean=0.000002 rms=0.000278 Jy/beam
! Combined flux in latest and established models = 0.306618 Jy
keep
! Adding 275 model components to the UV plane model.
! The established model now contains 493 components and 0.306618 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J2202-2335_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.973 x 7.839 at -3.363 degrees (North through East)
! Clean map  min=-0.0018565  max=0.20075 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J2202-2335_S_map.fits
wmodel /vlbi/uf001/uva//J2202-2335_S_map.mod
! Writing 493 model components to file: /vlbi/uf001/uva//J2202-2335_S_map.mod
wobs   /vlbi/uf001/uva//J2202-2335_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J2202-2335_S_uvs.fits
wwins  /vlbi/uf001/uva//J2202-2335_S_map.win
! wwins: Wrote 4 windows to /vlbi/uf001/uva//J2202-2335_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.200755 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000274844 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.410716 0.410716 0.821431 1.64286 3.28573 6.57145 13.1429 26.2858 52.5716
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.2 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  730.432 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J2202-2335_S_dfm.log closed on Mon Jan 14 06:05:55 2019