! Started logfile: /vlbi/uf001/uva//J2200+1030_S_dfm.log on Mon Jan 14 06:04:44 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J2200+1030_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J2200+1030_S_uva.fits
! AN table 1: 72 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.851852 visibilities/baseline/integration-bin.
! Found source: J2200+1030
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 8280 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J2200+1030_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 54 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 54 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 54 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.017042Jy  sigma=18.993364
! Fit after  self-cal, rms=0.901343Jy  sigma=16.721262
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.855 mas, bmaj=6.716 mas, bpa=-0.05044 degrees
! Estimated noise=0.641146 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0821839 Jy
! Component: 100  -  total flux cleaned = 0.100109 Jy
! Total flux subtracted in 100 components = 0.100109 Jy
! Clean residual min=-0.005247 max=0.006525 Jy/beam
! Clean residual mean=0.000008 rms=0.001510 Jy/beam
! Combined flux in latest and established models = 0.100109 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 4 components and 0.100109 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.072065Jy  sigma=1.227112
! Fit after  self-cal, rms=0.071919Jy  sigma=1.225286
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.345 mas, bmaj=7.21 mas, bpa=0.3195 degrees
! Estimated noise=0.424875 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00302876 Jy
! Component: 100  -  total flux cleaned = 0.00339061 Jy
! Component: 150  -  total flux cleaned = 0.00314106 Jy
! Component: 200  -  total flux cleaned = 0.0028894 Jy
! Total flux subtracted in 200 components = 0.0028894 Jy
! Clean residual min=-0.003577 max=0.005010 Jy/beam
! Clean residual mean=0.000013 rms=0.001163 Jy/beam
! Combined flux in latest and established models = 0.102998 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 17 components and 0.102998 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.071773Jy  sigma=1.219002
! Fit after  self-cal, rms=0.071760Jy  sigma=1.218616
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.345 x 7.21 at 0.3195 degrees (North through East)
! Clean map  min=-0.0035262  max=0.10393 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.96     HN        0.95     KP        0.93     
!   LA        0.96     MK        1.02     NL        0.97     OV        0.96     
!   PT        1.41     SC        1.02     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.94     HN        1.00     KP        0.95     
!   LA        0.95     MK        0.99     NL        0.99     OV        0.99     
!   PT        1.29     SC        0.97     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.93     HN        1.01     KP        0.91     
!   LA        0.97     MK        0.99     NL        0.96     OV        0.97     
!   PT        1.28     SC        0.97     
! 
! 
! Fit before self-cal, rms=0.071760Jy  sigma=1.218616
! Fit after  self-cal, rms=0.076497Jy  sigma=1.199775
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.339 mas, bmaj=7.176 mas, bpa=0.4558 degrees
! Estimated noise=0.419091 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000543443 Jy
! Component: 100  -  total flux cleaned = 0.000345529 Jy
! Component: 150  -  total flux cleaned = 0.000419112 Jy
! Component: 200  -  total flux cleaned = 0.00050481 Jy
! Total flux subtracted in 200 components = 0.00050481 Jy
! Clean residual min=-0.003475 max=0.003359 Jy/beam
! Clean residual mean=0.000017 rms=0.000877 Jy/beam
! Combined flux in latest and established models = 0.103503 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 29 components and 0.103503 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.076459Jy  sigma=1.199152
! Fit after  self-cal, rms=0.076624Jy  sigma=1.198637
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.076624Jy  sigma=1.198637
! Fit after  self-cal, rms=0.093566Jy  sigma=1.173241
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.333 mas, bmaj=7.177 mas, bpa=0.3045 degrees
! Estimated noise=0.420638 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00100878 Jy
! Component: 100  -  total flux cleaned = 0.00112782 Jy
! Component: 150  -  total flux cleaned = 0.00116409 Jy
! Component: 200  -  total flux cleaned = 0.00121171 Jy
! Total flux subtracted in 200 components = 0.00121171 Jy
! Clean residual min=-0.002088 max=0.002342 Jy/beam
! Clean residual mean=0.000002 rms=0.000504 Jy/beam
! Combined flux in latest and established models = 0.104715 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 38 components and 0.104715 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.093555Jy  sigma=1.172876
! Fit after  self-cal, rms=0.093769Jy  sigma=1.172326
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-12.5, -99.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00148584 Jy
! Component: 100  -  total flux cleaned = 0.00191531 Jy
! Component: 150  -  total flux cleaned = 0.00220315 Jy
! Component: 200  -  total flux cleaned = 0.00243851 Jy
! Total flux subtracted in 200 components = 0.00243851 Jy
! Clean residual min=-0.002094 max=0.001913 Jy/beam
! Clean residual mean=0.000002 rms=0.000476 Jy/beam
! Combined flux in latest and established models = 0.107153 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 58 components and 0.107153 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.093705Jy  sigma=1.171155
! Fit after  self-cal, rms=0.093698Jy  sigma=1.171065
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.093698Jy  sigma=1.171065
! Fit after  self-cal, rms=0.095662Jy  sigma=1.170917
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.33 mas, bmaj=7.176 mas, bpa=0.2713 degrees
! Estimated noise=0.42119 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000451426 Jy
! Component: 100  -  total flux cleaned = 0.000545356 Jy
! Component: 150  -  total flux cleaned = 0.000672265 Jy
! Component: 200  -  total flux cleaned = 0.000786381 Jy
! Total flux subtracted in 200 components = 0.000786381 Jy
! Clean residual min=-0.002019 max=0.001857 Jy/beam
! Clean residual mean=0.000001 rms=0.000468 Jy/beam
! Combined flux in latest and established models = 0.10794 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 69 components and 0.10794 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.095645Jy  sigma=1.170672
! Fit after  self-cal, rms=0.095654Jy  sigma=1.170651
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00018789 Jy
! Component: 100  -  total flux cleaned = 0.000292953 Jy
! Component: 150  -  total flux cleaned = 0.000357339 Jy
! Component: 200  -  total flux cleaned = 0.000372405 Jy
! Total flux subtracted in 200 components = 0.000372405 Jy
! Clean residual min=-0.002027 max=0.001854 Jy/beam
! Clean residual mean=0.000001 rms=0.000466 Jy/beam
! Combined flux in latest and established models = 0.108312 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 78 components and 0.108312 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.095646Jy  sigma=1.170539
! Fit after  self-cal, rms=0.095647Jy  sigma=1.170532
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.095647Jy  sigma=1.170532
! Fit after  self-cal, rms=0.095854Jy  sigma=1.170505
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.371 mas, bmaj=10.41 mas, bpa=0.3718 degrees
! Estimated noise=0.549355 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000982303 Jy
! Component: 100  -  total flux cleaned = 0.00109683 Jy
! Component: 150  -  total flux cleaned = 0.00107998 Jy
! Component: 200  -  total flux cleaned = 0.00106579 Jy
! Total flux subtracted in 200 components = 0.00106579 Jy
! Clean residual min=-0.001895 max=0.002228 Jy/beam
! Clean residual mean=0.000004 rms=0.000608 Jy/beam
! Combined flux in latest and established models = 0.109378 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 85 components and 0.109378 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.095850Jy  sigma=1.170649
! Fit after  self-cal, rms=0.095848Jy  sigma=1.170578
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000185018 Jy
! Component: 100  -  total flux cleaned = 0.000171873 Jy
! Component: 150  -  total flux cleaned = 0.000172798 Jy
! Component: 200  -  total flux cleaned = 0.000194587 Jy
! Total flux subtracted in 200 components = 0.000194587 Jy
! Clean residual min=-0.001896 max=0.002207 Jy/beam
! Clean residual mean=0.000004 rms=0.000605 Jy/beam
! Combined flux in latest and established models = 0.109572 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 93 components and 0.109572 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.095850Jy  sigma=1.170735
! Fit after  self-cal, rms=0.095850Jy  sigma=1.170713
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.327 mas, bmaj=7.176 mas, bpa=0.2348 degrees
! Estimated noise=0.421718 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.327 x 7.176 at 0.2348 degrees (North through East)
! Clean map  min=-0.0019787  max=0.10209 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.849 mas, bmaj=6.716 mas, bpa=-0.2096 degrees
! Estimated noise=0.632428 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0809552 Jy
! Component: 100  -  total flux cleaned = 0.0990066 Jy
! Component: 150  -  total flux cleaned = 0.105289 Jy
! Component: 200  -  total flux cleaned = 0.107756 Jy
! Total flux subtracted in 200 components = 0.107756 Jy
! Clean residual min=-0.003520 max=0.003093 Jy/beam
! Clean residual mean=-0.000001 rms=0.000953 Jy/beam
! Combined flux in latest and established models = 0.107756 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.107756 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.327 mas, bmaj=7.176 mas, bpa=0.2348 degrees
! Estimated noise=0.421718 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00131637 Jy
! Component: 100  -  total flux cleaned = 0.00131714 Jy
! Component: 150  -  total flux cleaned = 0.00139741 Jy
! Component: 200  -  total flux cleaned = 0.00160452 Jy
! Total flux subtracted in 200 components = 0.00160452 Jy
! Clean residual min=-0.001926 max=0.001875 Jy/beam
! Clean residual mean=0.000001 rms=0.000481 Jy/beam
! Combined flux in latest and established models = 0.10936 Jy
! Adding 25 model components to the UV plane model.
! The established model now contains 37 components and 0.10936 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.371 mas, bmaj=10.41 mas, bpa=0.3718 degrees
! Estimated noise=0.549355 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.95038e-05 Jy
! Component: 100  -  total flux cleaned = 0.000338068 Jy
! Component: 150  -  total flux cleaned = 0.000391161 Jy
! Component: 200  -  total flux cleaned = 0.000391771 Jy
! Total flux subtracted in 200 components = 0.000391771 Jy
! Clean residual min=-0.001957 max=0.002247 Jy/beam
! Clean residual mean=0.000004 rms=0.000615 Jy/beam
! Combined flux in latest and established models = 0.109752 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.06222e-06 Jy
! Component: 100  -  total flux cleaned = 1.84689e-05 Jy
! Component: 150  -  total flux cleaned = 1.73585e-05 Jy
! Component: 200  -  total flux cleaned = 1.70005e-05 Jy
! Total flux subtracted in 200 components = 1.70005e-05 Jy
! Clean residual min=-0.001921 max=0.002233 Jy/beam
! Clean residual mean=0.000004 rms=0.000611 Jy/beam
! Combined flux in latest and established models = 0.109769 Jy
! Adding 17 model components to the UV plane model.
! The established model now contains 52 components and 0.109769 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.327 mas, bmaj=7.176 mas, bpa=0.2348 degrees
! Estimated noise=0.421718 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000152121 Jy
! Component: 100  -  total flux cleaned = -0.000183384 Jy
! Component: 150  -  total flux cleaned = -0.000184813 Jy
! Component: 200  -  total flux cleaned = -0.000208396 Jy
! Total flux subtracted in 200 components = -0.000208396 Jy
! Clean residual min=-0.001989 max=0.001933 Jy/beam
! Clean residual mean=0.000001 rms=0.000469 Jy/beam
! Combined flux in latest and established models = 0.10956 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 63 components and 0.10956 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.095860Jy  sigma=1.170772
! Fit after  self-cal, rms=0.095862Jy  sigma=1.170751
wmodel J2200+1030_S_map.mod
! Writing 63 model components to file: J2200+1030_S_map.mod
wobs   J2200+1030_S_uvs.fits
! Writing UV FITS file: J2200+1030_S_uvs.fits
wwins  J2200+1030_S_map.win
! wwins: Wrote 2 windows to J2200+1030_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000141348 Jy
! Component: 100  -  total flux cleaned = -0.000204818 Jy
! Component: 150  -  total flux cleaned = -0.000233729 Jy
! Component: 200  -  total flux cleaned = -0.000175445 Jy
! Component: 250  -  total flux cleaned = -0.000231028 Jy
! Component: 300  -  total flux cleaned = -0.00028465 Jy
! Component: 350  -  total flux cleaned = -0.000389767 Jy
! Component: 400  -  total flux cleaned = -0.000441183 Jy
! Component: 450  -  total flux cleaned = -0.000591515 Jy
! Component: 500  -  total flux cleaned = -0.000542473 Jy
! Component: 550  -  total flux cleaned = -0.000541929 Jy
! Component: 600  -  total flux cleaned = -0.000518164 Jy
! Component: 650  -  total flux cleaned = -0.000471736 Jy
! Component: 700  -  total flux cleaned = -0.000471357 Jy
! Component: 750  -  total flux cleaned = -0.00044854 Jy
! Component: 800  -  total flux cleaned = -0.000470071 Jy
! Component: 850  -  total flux cleaned = -0.00051314 Jy
! Component: 900  -  total flux cleaned = -0.000513558 Jy
! Component: 950  -  total flux cleaned = -0.000640328 Jy
! Component: 1000  -  total flux cleaned = -0.000744076 Jy
! Component: 1050  -  total flux cleaned = -0.000846246 Jy
! Component: 1100  -  total flux cleaned = -0.00090704 Jy
! Component: 1150  -  total flux cleaned = -0.000986567 Jy
! Component: 1200  -  total flux cleaned = -0.00108479 Jy
! Component: 1250  -  total flux cleaned = -0.00122037 Jy
! Component: 1300  -  total flux cleaned = -0.00129681 Jy
! Component: 1350  -  total flux cleaned = -0.00142904 Jy
! Component: 1400  -  total flux cleaned = -0.0015969 Jy
! Component: 1450  -  total flux cleaned = -0.00172556 Jy
! Component: 1500  -  total flux cleaned = -0.00185284 Jy
! Component: 1550  -  total flux cleaned = -0.00203278 Jy
! Component: 1600  -  total flux cleaned = -0.00219333 Jy
! Component: 1650  -  total flux cleaned = -0.00236899 Jy
! Component: 1700  -  total flux cleaned = -0.00245573 Jy
! Component: 1750  -  total flux cleaned = -0.0026454 Jy
! Component: 1800  -  total flux cleaned = -0.00279858 Jy
! Component: 1850  -  total flux cleaned = -0.00293351 Jy
! Component: 1900  -  total flux cleaned = -0.003134 Jy
! Component: 1950  -  total flux cleaned = -0.00321638 Jy
! Component: 2000  -  total flux cleaned = -0.00336395 Jy
! Component: 2050  -  total flux cleaned = -0.00352625 Jy
! Component: 2100  -  total flux cleaned = -0.00360687 Jy
! Component: 2150  -  total flux cleaned = -0.00376612 Jy
! Component: 2200  -  total flux cleaned = -0.00389241 Jy
! Component: 2250  -  total flux cleaned = -0.00401752 Jy
! Component: 2300  -  total flux cleaned = -0.00415703 Jy
! Component: 2350  -  total flux cleaned = -0.0041875 Jy
! Component: 2400  -  total flux cleaned = -0.00430954 Jy
! Component: 2450  -  total flux cleaned = -0.00441525 Jy
! Component: 2500  -  total flux cleaned = -0.0044903 Jy
! Component: 2550  -  total flux cleaned = -0.0045945 Jy
! Component: 2600  -  total flux cleaned = -0.0046683 Jy
! Component: 2650  -  total flux cleaned = -0.00472686 Jy
! Component: 2700  -  total flux cleaned = -0.00482868 Jy
! Component: 2750  -  total flux cleaned = -0.00488643 Jy
! Component: 2800  -  total flux cleaned = -0.00501509 Jy
! Component: 2850  -  total flux cleaned = -0.00510008 Jy
! Component: 2900  -  total flux cleaned = -0.00512835 Jy
! Component: 2950  -  total flux cleaned = -0.00525402 Jy
! Component: 3000  -  total flux cleaned = -0.00530952 Jy
! Component: 3050  -  total flux cleaned = -0.00540589 Jy
! Component: 3100  -  total flux cleaned = -0.00543318 Jy
! Component: 3150  -  total flux cleaned = -0.00550092 Jy
! Component: 3200  -  total flux cleaned = -0.00559503 Jy
! Component: 3250  -  total flux cleaned = -0.00559503 Jy
! Component: 3300  -  total flux cleaned = -0.00567468 Jy
! Component: 3350  -  total flux cleaned = -0.00568781 Jy
! Component: 3400  -  total flux cleaned = -0.00574017 Jy
! Component: 3450  -  total flux cleaned = -0.00577905 Jy
! Component: 3500  -  total flux cleaned = -0.00586938 Jy
! Component: 3550  -  total flux cleaned = -0.00586939 Jy
! Component: 3600  -  total flux cleaned = -0.00590747 Jy
! Component: 3650  -  total flux cleaned = -0.0059329 Jy
! Component: 3700  -  total flux cleaned = -0.00590774 Jy
! Component: 3750  -  total flux cleaned = -0.00597022 Jy
! Component: 3800  -  total flux cleaned = -0.00603226 Jy
! Component: 3850  -  total flux cleaned = -0.00602003 Jy
! Component: 3900  -  total flux cleaned = -0.00609353 Jy
! Component: 3950  -  total flux cleaned = -0.00611781 Jy
! Component: 4000  -  total flux cleaned = -0.00612986 Jy
! Component: 4050  -  total flux cleaned = -0.00611774 Jy
! Total flux subtracted in 4096 components = -0.00617768 Jy
! Clean residual min=-0.000713 max=0.000686 Jy/beam
! Clean residual mean=0.000001 rms=0.000231 Jy/beam
! Combined flux in latest and established models = 0.103383 Jy
keep
! Adding 310 model components to the UV plane model.
! The established model now contains 373 components and 0.103383 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J2200+1030_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.327 x 7.176 at 0.2348 degrees (North through East)
! Clean map  min=-0.0012641  max=0.10156 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J2200+1030_S_map.fits
wmodel /vlbi/uf001/uva//J2200+1030_S_map.mod
! Writing 373 model components to file: /vlbi/uf001/uva//J2200+1030_S_map.mod
wobs   /vlbi/uf001/uva//J2200+1030_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J2200+1030_S_uvs.fits
wwins  /vlbi/uf001/uva//J2200+1030_S_map.win
! wwins: Wrote 3 windows to /vlbi/uf001/uva//J2200+1030_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.101563 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000227999 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.673469 0.673469 1.34694 2.69387 5.38775 10.7755 21.551 43.102 86.204
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.101 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  445.455 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J2200+1030_S_dfm.log closed on Mon Jan 14 06:04:48 2019