! Started logfile: /vlbi/uf001/uva//J2159-2516_S_dfm.log on Mon Jan 14 06:04:33 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J2159-2516_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J2159-2516_S_uva.fits
! AN table 1: 38 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.992398 visibilities/baseline/integration-bin.
! Found source: J2159-2516
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 5091 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J2159-2516_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.017573Jy  sigma=17.374110
! Fit after  self-cal, rms=0.835689Jy  sigma=14.103597
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.489 mas, bmaj=6.723 mas, bpa=-3.275 degrees
! Estimated noise=0.866791 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.133289 Jy
! Component: 100  -  total flux cleaned = 0.162706 Jy
! Total flux subtracted in 100 components = 0.162706 Jy
! Clean residual min=-0.007435 max=0.014288 Jy/beam
! Clean residual mean=-0.000077 rms=0.002344 Jy/beam
! Combined flux in latest and established models = 0.162706 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.162706 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.090006Jy  sigma=1.411793
! Fit after  self-cal, rms=0.090000Jy  sigma=1.411470
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.987 mas, bmaj=7.929 mas, bpa=-2.476 degrees
! Estimated noise=0.624984 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-3.5, 7.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0173418 Jy
! Component: 100  -  total flux cleaned = 0.0279752 Jy
! Component: 150  -  total flux cleaned = 0.0351118 Jy
! Component: 200  -  total flux cleaned = 0.0401449 Jy
! Total flux subtracted in 200 components = 0.0401449 Jy
! Clean residual min=-0.006726 max=0.010789 Jy/beam
! Clean residual mean=-0.000083 rms=0.001993 Jy/beam
! Combined flux in latest and established models = 0.202851 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 37 components and 0.202851 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.086451Jy  sigma=1.338509
! Fit after  self-cal, rms=0.086323Jy  sigma=1.333414
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.987 x 7.929 at -2.476 degrees (North through East)
! Clean map  min=-0.0067142  max=0.16429 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.96     HN        1.14     KP        0.97     
!   LA        0.91     MK        0.99     NL        1.06     OV        0.98     
!   PT        0.93     SC        1.02     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.21     FD        0.98     HN        1.17     KP        0.97     
!   LA        0.90     MK        0.95     NL        1.16     OV        1.01     
!   PT        0.96     SC        0.96     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        0.99     HN        1.18     KP        0.96     
!   LA        0.90     MK        1.00     NL        1.04     OV        0.98     
!   PT        0.95     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.086323Jy  sigma=1.333414
! Fit after  self-cal, rms=0.089953Jy  sigma=1.303382
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.998 mas, bmaj=7.933 mas, bpa=-2.433 degrees
! Estimated noise=0.623316 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-4, 36.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00719734 Jy
! Component: 100  -  total flux cleaned = 0.0103159 Jy
! Component: 150  -  total flux cleaned = 0.0114349 Jy
! Component: 200  -  total flux cleaned = 0.0121554 Jy
! Total flux subtracted in 200 components = 0.0121554 Jy
! Clean residual min=-0.004735 max=0.004845 Jy/beam
! Clean residual mean=-0.000003 rms=0.001283 Jy/beam
! Combined flux in latest and established models = 0.215006 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 64 components and 0.215007 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.089352Jy  sigma=1.290378
! Fit after  self-cal, rms=0.089460Jy  sigma=1.289401
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.089460Jy  sigma=1.289401
! Fit after  self-cal, rms=0.094666Jy  sigma=1.273033
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.992 mas, bmaj=7.941 mas, bpa=-2.671 degrees
! Estimated noise=0.626311 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00103986 Jy
! Component: 100  -  total flux cleaned = 0.00170097 Jy
! Component: 150  -  total flux cleaned = 0.00204339 Jy
! Component: 200  -  total flux cleaned = 0.00198238 Jy
! Total flux subtracted in 200 components = 0.00198238 Jy
! Clean residual min=-0.003532 max=0.004112 Jy/beam
! Clean residual mean=-0.000004 rms=0.000992 Jy/beam
! Combined flux in latest and established models = 0.216989 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 84 components and 0.216989 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.094524Jy  sigma=1.270244
! Fit after  self-cal, rms=0.094588Jy  sigma=1.270052
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000159137 Jy
! Component: 100  -  total flux cleaned = 0.000270209 Jy
! Component: 150  -  total flux cleaned = 0.000272097 Jy
! Component: 200  -  total flux cleaned = 0.000318393 Jy
! Total flux subtracted in 200 components = 0.000318393 Jy
! Clean residual min=-0.003412 max=0.004034 Jy/beam
! Clean residual mean=-0.000003 rms=0.000974 Jy/beam
! Combined flux in latest and established models = 0.217307 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 95 components and 0.217307 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.094532Jy  sigma=1.269088
! Fit after  self-cal, rms=0.094530Jy  sigma=1.269046
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.094530Jy  sigma=1.269046
! Fit after  self-cal, rms=0.098692Jy  sigma=1.264857
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.993 mas, bmaj=7.95 mas, bpa=-2.739 degrees
! Estimated noise=0.623812 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000337703 Jy
! Component: 100  -  total flux cleaned = -0.000235972 Jy
! Component: 150  -  total flux cleaned = -0.000192138 Jy
! Component: 200  -  total flux cleaned = -0.000192904 Jy
! Total flux subtracted in 200 components = -0.000192904 Jy
! Clean residual min=-0.002943 max=0.004118 Jy/beam
! Clean residual mean=-0.000004 rms=0.000871 Jy/beam
! Combined flux in latest and established models = 0.217114 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 117 components and 0.217114 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.098623Jy  sigma=1.263768
! Fit after  self-cal, rms=0.098659Jy  sigma=1.263688
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (77.5, -120.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00335959 Jy
! Component: 100  -  total flux cleaned = 0.00349308 Jy
! Component: 150  -  total flux cleaned = 0.00348862 Jy
! Component: 200  -  total flux cleaned = 0.00368935 Jy
! Total flux subtracted in 200 components = 0.00368935 Jy
! Clean residual min=-0.002972 max=0.003439 Jy/beam
! Clean residual mean=-0.000003 rms=0.000809 Jy/beam
! Combined flux in latest and established models = 0.220804 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 137 components and 0.220804 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.098494Jy  sigma=1.260926
! Fit after  self-cal, rms=0.098484Jy  sigma=1.260810
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.098484Jy  sigma=1.260810
! Fit after  self-cal, rms=0.098769Jy  sigma=1.260604
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.75 mas, bmaj=19.05 mas, bpa=2.892 degrees
! Estimated noise=0.791256 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000754881 Jy
! Component: 100  -  total flux cleaned = 0.00074971 Jy
! Component: 150  -  total flux cleaned = 0.000642573 Jy
! Component: 200  -  total flux cleaned = 0.000547655 Jy
! Total flux subtracted in 200 components = 0.000547655 Jy
! Clean residual min=-0.003764 max=0.003696 Jy/beam
! Clean residual mean=0.000005 rms=0.001104 Jy/beam
! Combined flux in latest and established models = 0.221351 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 151 components and 0.221351 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.098749Jy  sigma=1.260382
! Fit after  self-cal, rms=0.098765Jy  sigma=1.260310
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000132002 Jy
! Component: 100  -  total flux cleaned = 4.26674e-05 Jy
! Component: 150  -  total flux cleaned = -4.49435e-05 Jy
! Component: 200  -  total flux cleaned = -0.000127609 Jy
! Total flux subtracted in 200 components = -0.000127609 Jy
! Clean residual min=-0.003780 max=0.003615 Jy/beam
! Clean residual mean=0.000005 rms=0.001092 Jy/beam
! Combined flux in latest and established models = 0.221224 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 156 components and 0.221224 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.098753Jy  sigma=1.260070
! Fit after  self-cal, rms=0.098754Jy  sigma=1.260057
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.994 mas, bmaj=7.954 mas, bpa=-2.757 degrees
! Estimated noise=0.621377 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.994 x 7.954 at -2.757 degrees (North through East)
! Clean map  min=-0.0026227  max=0.16396 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.494 mas, bmaj=6.754 mas, bpa=-3.633 degrees
! Estimated noise=0.866574 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.132967 Jy
! Component: 100  -  total flux cleaned = 0.162642 Jy
! Component: 150  -  total flux cleaned = 0.174831 Jy
! Component: 200  -  total flux cleaned = 0.183807 Jy
! Total flux subtracted in 200 components = 0.183807 Jy
! Clean residual min=-0.004820 max=0.005835 Jy/beam
! Clean residual mean=-0.000028 rms=0.001340 Jy/beam
! Combined flux in latest and established models = 0.183807 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.183807 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.994 mas, bmaj=7.954 mas, bpa=-2.757 degrees
! Estimated noise=0.621377 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0081812 Jy
! Component: 100  -  total flux cleaned = 0.0140947 Jy
! Component: 150  -  total flux cleaned = 0.0187562 Jy
! Component: 200  -  total flux cleaned = 0.0225139 Jy
! Total flux subtracted in 200 components = 0.0225139 Jy
! Clean residual min=-0.003309 max=0.003364 Jy/beam
! Clean residual mean=-0.000024 rms=0.000937 Jy/beam
! Combined flux in latest and established models = 0.206321 Jy
! Adding 49 model components to the UV plane model.
! The established model now contains 63 components and 0.206321 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.75 mas, bmaj=19.05 mas, bpa=2.892 degrees
! Estimated noise=0.791256 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0051158 Jy
! Component: 100  -  total flux cleaned = 0.00814935 Jy
! Component: 150  -  total flux cleaned = 0.0102835 Jy
! Component: 200  -  total flux cleaned = 0.0118465 Jy
! Total flux subtracted in 200 components = 0.0118465 Jy
! Clean residual min=-0.003981 max=0.003487 Jy/beam
! Clean residual mean=-0.000008 rms=0.001124 Jy/beam
! Combined flux in latest and established models = 0.218167 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000913945 Jy
! Component: 100  -  total flux cleaned = 0.00115793 Jy
! Component: 150  -  total flux cleaned = 0.00123035 Jy
! Component: 200  -  total flux cleaned = 0.00126402 Jy
! Total flux subtracted in 200 components = 0.00126402 Jy
! Clean residual min=-0.003935 max=0.003361 Jy/beam
! Clean residual mean=-0.000004 rms=0.001099 Jy/beam
! Combined flux in latest and established models = 0.219431 Jy
! Adding 72 model components to the UV plane model.
! The established model now contains 125 components and 0.219431 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.994 mas, bmaj=7.954 mas, bpa=-2.757 degrees
! Estimated noise=0.621377 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000334502 Jy
! Component: 100  -  total flux cleaned = 9.69745e-05 Jy
! Component: 150  -  total flux cleaned = -1.29441e-05 Jy
! Component: 200  -  total flux cleaned = -0.000166264 Jy
! Total flux subtracted in 200 components = -0.000166264 Jy
! Clean residual min=-0.002972 max=0.003143 Jy/beam
! Clean residual mean=-0.000003 rms=0.000783 Jy/beam
! Combined flux in latest and established models = 0.219265 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 147 components and 0.219265 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.098785Jy  sigma=1.260219
! Fit after  self-cal, rms=0.098740Jy  sigma=1.259966
wmodel J2159-2516_S_map.mod
! Writing 147 model components to file: J2159-2516_S_map.mod
wobs   J2159-2516_S_uvs.fits
! Writing UV FITS file: J2159-2516_S_uvs.fits
wwins  J2159-2516_S_map.win
! wwins: Wrote 4 windows to J2159-2516_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000662728 Jy
! Component: 100  -  total flux cleaned = 0.0012344 Jy
! Component: 150  -  total flux cleaned = 0.00172335 Jy
! Component: 200  -  total flux cleaned = 0.00219099 Jy
! Component: 250  -  total flux cleaned = 0.0025508 Jy
! Component: 300  -  total flux cleaned = 0.00294285 Jy
! Component: 350  -  total flux cleaned = 0.00323735 Jy
! Component: 400  -  total flux cleaned = 0.00336018 Jy
! Component: 450  -  total flux cleaned = 0.00356068 Jy
! Component: 500  -  total flux cleaned = 0.0036001 Jy
! Component: 550  -  total flux cleaned = 0.00371488 Jy
! Component: 600  -  total flux cleaned = 0.00382677 Jy
! Component: 650  -  total flux cleaned = 0.00386367 Jy
! Component: 700  -  total flux cleaned = 0.00404332 Jy
! Component: 750  -  total flux cleaned = 0.00421938 Jy
! Component: 800  -  total flux cleaned = 0.00445988 Jy
! Component: 850  -  total flux cleaned = 0.00449311 Jy
! Component: 900  -  total flux cleaned = 0.00469432 Jy
! Component: 950  -  total flux cleaned = 0.00492456 Jy
! Component: 1000  -  total flux cleaned = 0.0050533 Jy
! Component: 1050  -  total flux cleaned = 0.00521205 Jy
! Component: 1100  -  total flux cleaned = 0.00521222 Jy
! Component: 1150  -  total flux cleaned = 0.00539794 Jy
! Component: 1200  -  total flux cleaned = 0.00551888 Jy
! Component: 1250  -  total flux cleaned = 0.00557792 Jy
! Component: 1300  -  total flux cleaned = 0.00560724 Jy
! Component: 1350  -  total flux cleaned = 0.00560767 Jy
! Component: 1400  -  total flux cleaned = 0.00569364 Jy
! Component: 1450  -  total flux cleaned = 0.00577759 Jy
! Component: 1500  -  total flux cleaned = 0.00577657 Jy
! Component: 1550  -  total flux cleaned = 0.00580315 Jy
! Component: 1600  -  total flux cleaned = 0.0057219 Jy
! Component: 1650  -  total flux cleaned = 0.00574925 Jy
! Component: 1700  -  total flux cleaned = 0.00585504 Jy
! Component: 1750  -  total flux cleaned = 0.00590701 Jy
! Component: 1800  -  total flux cleaned = 0.00590683 Jy
! Component: 1850  -  total flux cleaned = 0.00585651 Jy
! Component: 1900  -  total flux cleaned = 0.00608278 Jy
! Component: 1950  -  total flux cleaned = 0.00608268 Jy
! Component: 2000  -  total flux cleaned = 0.00613179 Jy
! Component: 2050  -  total flux cleaned = 0.00615597 Jy
! Component: 2100  -  total flux cleaned = 0.00618016 Jy
! Component: 2150  -  total flux cleaned = 0.00617995 Jy
! Component: 2200  -  total flux cleaned = 0.00622645 Jy
! Component: 2250  -  total flux cleaned = 0.00622635 Jy
! Component: 2300  -  total flux cleaned = 0.00617954 Jy
! Component: 2350  -  total flux cleaned = 0.0061568 Jy
! Component: 2400  -  total flux cleaned = 0.00604434 Jy
! Component: 2450  -  total flux cleaned = 0.0060667 Jy
! Component: 2500  -  total flux cleaned = 0.00600042 Jy
! Component: 2550  -  total flux cleaned = 0.00600043 Jy
! Component: 2600  -  total flux cleaned = 0.00597882 Jy
! Component: 2650  -  total flux cleaned = 0.00597912 Jy
! Component: 2700  -  total flux cleaned = 0.0059577 Jy
! Component: 2750  -  total flux cleaned = 0.00585221 Jy
! Component: 2800  -  total flux cleaned = 0.00585242 Jy
! Component: 2850  -  total flux cleaned = 0.00583158 Jy
! Component: 2900  -  total flux cleaned = 0.00583165 Jy
! Component: 2950  -  total flux cleaned = 0.00581125 Jy
! Component: 3000  -  total flux cleaned = 0.00575059 Jy
! Component: 3050  -  total flux cleaned = 0.00575067 Jy
! Component: 3100  -  total flux cleaned = 0.0057906 Jy
! Component: 3150  -  total flux cleaned = 0.00581015 Jy
! Component: 3200  -  total flux cleaned = 0.00571215 Jy
! Component: 3250  -  total flux cleaned = 0.00575109 Jy
! Component: 3300  -  total flux cleaned = 0.00567395 Jy
! Component: 3350  -  total flux cleaned = 0.0056356 Jy
! Component: 3400  -  total flux cleaned = 0.00563576 Jy
! Component: 3450  -  total flux cleaned = 0.00561695 Jy
! Component: 3500  -  total flux cleaned = 0.00561681 Jy
! Component: 3550  -  total flux cleaned = 0.00556089 Jy
! Component: 3600  -  total flux cleaned = 0.00546901 Jy
! Component: 3650  -  total flux cleaned = 0.00548742 Jy
! Component: 3700  -  total flux cleaned = 0.0054148 Jy
! Component: 3750  -  total flux cleaned = 0.00543275 Jy
! Component: 3800  -  total flux cleaned = 0.00537895 Jy
! Component: 3850  -  total flux cleaned = 0.00532564 Jy
! Component: 3900  -  total flux cleaned = 0.00534331 Jy
! Component: 3950  -  total flux cleaned = 0.00534333 Jy
! Component: 4000  -  total flux cleaned = 0.00520403 Jy
! Component: 4050  -  total flux cleaned = 0.00527319 Jy
! Total flux subtracted in 4096 components = 0.00522146 Jy
! Clean residual min=-0.001390 max=0.000973 Jy/beam
! Clean residual mean=0.000001 rms=0.000313 Jy/beam
! Combined flux in latest and established models = 0.224487 Jy
keep
! Adding 287 model components to the UV plane model.
! The established model now contains 434 components and 0.224487 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J2159-2516_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.994 x 7.954 at -2.757 degrees (North through East)
! Clean map  min=-0.0020779  max=0.16562 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J2159-2516_S_map.fits
wmodel /vlbi/uf001/uva//J2159-2516_S_map.mod
! Writing 434 model components to file: /vlbi/uf001/uva//J2159-2516_S_map.mod
wobs   /vlbi/uf001/uva//J2159-2516_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J2159-2516_S_uvs.fits
wwins  /vlbi/uf001/uva//J2159-2516_S_map.win
! wwins: Wrote 5 windows to /vlbi/uf001/uva//J2159-2516_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.165624 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000305841 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.55398 0.55398 1.10796 2.21592 4.43184 8.86368 17.7274 35.4547 70.9095
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0009 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.165 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  541.535 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J2159-2516_S_dfm.log closed on Mon Jan 14 06:04:37 2019