! Started logfile: /vlbi/uf001/uva//J2153-1136_S_dfm.log on Mon Jan 14 06:02:03 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J2153-1136_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J2153-1136_S_uva.fits
! AN table 1: 38 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.962406 visibilities/baseline/integration-bin.
! Found source: J2153-1136
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 2304 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J2153-1136_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.053826Jy  sigma=22.587324
! Fit after  self-cal, rms=0.755679Jy  sigma=16.153473
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.677 mas, bmaj=27.61 mas, bpa=-10.18 degrees
! Estimated noise=0.88496 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.19286 Jy
! Component: 100  -  total flux cleaned = 0.234917 Jy
! Total flux subtracted in 100 components = 0.234917 Jy
! Clean residual min=-0.006270 max=0.011734 Jy/beam
! Clean residual mean=0.000052 rms=0.002116 Jy/beam
! Combined flux in latest and established models = 0.234917 Jy
! Performing phase self-cal
! Adding 2 model components to the UV plane model.
! The established model now contains 2 components and 0.234917 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063353Jy  sigma=1.312863
! Fit after  self-cal, rms=0.063348Jy  sigma=1.312809
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.429 mas, bmaj=28.42 mas, bpa=-10.62 degrees
! Estimated noise=0.703083 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0109515 Jy
! Component: 100  -  total flux cleaned = 0.0149755 Jy
! Component: 150  -  total flux cleaned = 0.0149836 Jy
! Component: 200  -  total flux cleaned = 0.0150951 Jy
! Total flux subtracted in 200 components = 0.0150951 Jy
! Clean residual min=-0.004557 max=0.004255 Jy/beam
! Clean residual mean=0.000024 rms=0.001277 Jy/beam
! Combined flux in latest and established models = 0.250012 Jy
! Performing phase self-cal
! Adding 43 model components to the UV plane model.
! The established model now contains 44 components and 0.250012 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061565Jy  sigma=1.270414
! Fit after  self-cal, rms=0.061557Jy  sigma=1.270313
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.429 x 28.42 at -10.62 degrees (North through East)
! Clean map  min=-0.0045917  max=0.24646 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.01     HN        0.99     KP        1.05     LA        0.94     
!   NL        1.02     OV        1.00     PT        1.04     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.97     HN        1.01     KP        1.02     LA        0.95     
!   NL        1.04     OV        0.91     PT        1.01     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.01     HN        1.04     KP        1.03     LA        0.96     
!   NL        0.99     OV        0.98     PT        1.00     
! 
! 
! Fit before self-cal, rms=0.061557Jy  sigma=1.270313
! Fit after  self-cal, rms=0.060028Jy  sigma=1.242079
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.451 mas, bmaj=28.34 mas, bpa=-10.48 degrees
! Estimated noise=0.699203 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00141192 Jy
! Component: 100  -  total flux cleaned = -0.00190547 Jy
! Component: 150  -  total flux cleaned = -0.00185471 Jy
! Component: 200  -  total flux cleaned = -0.00176406 Jy
! Total flux subtracted in 200 components = -0.00176406 Jy
! Clean residual min=-0.002890 max=0.002641 Jy/beam
! Clean residual mean=0.000008 rms=0.000829 Jy/beam
! Combined flux in latest and established models = 0.248248 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 64 components and 0.248248 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059983Jy  sigma=1.241337
! Fit after  self-cal, rms=0.059999Jy  sigma=1.241224
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059999Jy  sigma=1.241224
! Fit after  self-cal, rms=0.059852Jy  sigma=1.238417
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.452 mas, bmaj=28.35 mas, bpa=-10.48 degrees
! Estimated noise=0.698481 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000803588 Jy
! Component: 100  -  total flux cleaned = -0.0010307 Jy
! Component: 150  -  total flux cleaned = -0.00101264 Jy
! Component: 200  -  total flux cleaned = -0.00103014 Jy
! Total flux subtracted in 200 components = -0.00103014 Jy
! Clean residual min=-0.002649 max=0.002310 Jy/beam
! Clean residual mean=0.000006 rms=0.000758 Jy/beam
! Combined flux in latest and established models = 0.247218 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 83 components and 0.247218 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059835Jy  sigma=1.238097
! Fit after  self-cal, rms=0.059834Jy  sigma=1.238085
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.70162e-05 Jy
! Component: 100  -  total flux cleaned = 2.19308e-05 Jy
! Component: 150  -  total flux cleaned = 5.0568e-05 Jy
! Component: 200  -  total flux cleaned = 5.07064e-05 Jy
! Total flux subtracted in 200 components = 5.07064e-05 Jy
! Clean residual min=-0.002613 max=0.002279 Jy/beam
! Clean residual mean=0.000006 rms=0.000753 Jy/beam
! Combined flux in latest and established models = 0.247269 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 94 components and 0.247269 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059828Jy  sigma=1.237945
! Fit after  self-cal, rms=0.059827Jy  sigma=1.237942
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059827Jy  sigma=1.237942
! Fit after  self-cal, rms=0.059839Jy  sigma=1.237717
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.456 mas, bmaj=28.36 mas, bpa=-10.47 degrees
! Estimated noise=0.698386 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000464715 Jy
! Component: 100  -  total flux cleaned = -0.000702984 Jy
! Component: 150  -  total flux cleaned = -0.00076226 Jy
! Component: 200  -  total flux cleaned = -0.000775654 Jy
! Total flux subtracted in 200 components = -0.000775654 Jy
! Clean residual min=-0.002690 max=0.002311 Jy/beam
! Clean residual mean=0.000006 rms=0.000742 Jy/beam
! Combined flux in latest and established models = 0.246493 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 106 components and 0.246493 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059829Jy  sigma=1.237556
! Fit after  self-cal, rms=0.059830Jy  sigma=1.237551
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.54145e-06 Jy
! Component: 100  -  total flux cleaned = 2.74035e-06 Jy
! Component: 150  -  total flux cleaned = -9.05102e-06 Jy
! Component: 200  -  total flux cleaned = -1.99904e-05 Jy
! Total flux subtracted in 200 components = -1.99904e-05 Jy
! Clean residual min=-0.002704 max=0.002303 Jy/beam
! Clean residual mean=0.000006 rms=0.000739 Jy/beam
! Combined flux in latest and established models = 0.246473 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 112 components and 0.246473 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059826Jy  sigma=1.237460
! Fit after  self-cal, rms=0.059825Jy  sigma=1.237459
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059825Jy  sigma=1.237459
! Fit after  self-cal, rms=0.059826Jy  sigma=1.237397
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.865 mas, bmaj=27.64 mas, bpa=-10.11 degrees
! Estimated noise=0.756521 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000525981 Jy
! Component: 100  -  total flux cleaned = -0.000662786 Jy
! Component: 150  -  total flux cleaned = -0.000744508 Jy
! Component: 200  -  total flux cleaned = -0.000777099 Jy
! Total flux subtracted in 200 components = -0.000777099 Jy
! Clean residual min=-0.002800 max=0.002425 Jy/beam
! Clean residual mean=0.000007 rms=0.000797 Jy/beam
! Combined flux in latest and established models = 0.245696 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 132 components and 0.245696 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059823Jy  sigma=1.237357
! Fit after  self-cal, rms=0.059823Jy  sigma=1.237344
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.18182e-05 Jy
! Component: 100  -  total flux cleaned = -4.21496e-05 Jy
! Component: 150  -  total flux cleaned = -7.17033e-05 Jy
! Component: 200  -  total flux cleaned = -8.13108e-05 Jy
! Total flux subtracted in 200 components = -8.13108e-05 Jy
! Clean residual min=-0.002769 max=0.002418 Jy/beam
! Clean residual mean=0.000007 rms=0.000794 Jy/beam
! Combined flux in latest and established models = 0.245614 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 140 components and 0.245614 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059823Jy  sigma=1.237348
! Fit after  self-cal, rms=0.059822Jy  sigma=1.237345
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=5.459 mas, bmaj=28.37 mas, bpa=-10.47 degrees
! Estimated noise=0.698292 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.459 x 28.37 at -10.47 degrees (North through East)
! Clean map  min=-0.002637  max=0.24441 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.707 mas, bmaj=27.62 mas, bpa=-10.06 degrees
! Estimated noise=0.879969 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.191762 Jy
! Component: 100  -  total flux cleaned = 0.233578 Jy
! Component: 150  -  total flux cleaned = 0.241994 Jy
! Component: 200  -  total flux cleaned = 0.242282 Jy
! Total flux subtracted in 200 components = 0.242282 Jy
! Clean residual min=-0.003287 max=0.002940 Jy/beam
! Clean residual mean=0.000011 rms=0.000964 Jy/beam
! Combined flux in latest and established models = 0.242282 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 20 model components to the UV plane model.
! The established model now contains 20 components and 0.242282 Jy
! Inverting map and beam 
! Estimated beam: bmin=5.459 mas, bmaj=28.37 mas, bpa=-10.47 degrees
! Estimated noise=0.698292 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00186241 Jy
! Component: 100  -  total flux cleaned = 0.00202433 Jy
! Component: 150  -  total flux cleaned = 0.00214163 Jy
! Component: 200  -  total flux cleaned = 0.00222884 Jy
! Total flux subtracted in 200 components = 0.00222884 Jy
! Clean residual min=-0.002778 max=0.002202 Jy/beam
! Clean residual mean=0.000007 rms=0.000761 Jy/beam
! Combined flux in latest and established models = 0.244511 Jy
! Adding 37 model components to the UV plane model.
! The established model now contains 54 components and 0.244511 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.865 mas, bmaj=27.64 mas, bpa=-10.11 degrees
! Estimated noise=0.756521 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00069749 Jy
! Component: 100  -  total flux cleaned = 0.00098623 Jy
! Component: 150  -  total flux cleaned = 0.0010367 Jy
! Component: 200  -  total flux cleaned = 0.00107742 Jy
! Total flux subtracted in 200 components = 0.00107742 Jy
! Clean residual min=-0.002835 max=0.002397 Jy/beam
! Clean residual mean=0.000007 rms=0.000797 Jy/beam
! Combined flux in latest and established models = 0.245589 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.1948e-05 Jy
! Component: 100  -  total flux cleaned = 4.26412e-05 Jy
! Component: 150  -  total flux cleaned = 5.14081e-05 Jy
! Component: 200  -  total flux cleaned = 4.25217e-05 Jy
! Total flux subtracted in 200 components = 4.25217e-05 Jy
! Clean residual min=-0.002796 max=0.002403 Jy/beam
! Clean residual mean=0.000007 rms=0.000792 Jy/beam
! Combined flux in latest and established models = 0.245631 Jy
! Adding 63 model components to the UV plane model.
! The established model now contains 113 components and 0.245631 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=5.459 mas, bmaj=28.37 mas, bpa=-10.47 degrees
! Estimated noise=0.698292 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.57755e-05 Jy
! Component: 100  -  total flux cleaned = -7.42953e-05 Jy
! Component: 150  -  total flux cleaned = -0.000104776 Jy
! Component: 200  -  total flux cleaned = -0.000105184 Jy
! Total flux subtracted in 200 components = -0.000105184 Jy
! Clean residual min=-0.002695 max=0.002259 Jy/beam
! Clean residual mean=0.000006 rms=0.000742 Jy/beam
! Combined flux in latest and established models = 0.245526 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 131 components and 0.245526 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059831Jy  sigma=1.237572
! Fit after  self-cal, rms=0.059831Jy  sigma=1.237550
wmodel J2153-1136_S_map.mod
! Writing 131 model components to file: J2153-1136_S_map.mod
wobs   J2153-1136_S_uvs.fits
! Writing UV FITS file: J2153-1136_S_uvs.fits
wwins  J2153-1136_S_map.win
! wwins: Wrote 1 windows to J2153-1136_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00120901 Jy
! Component: 100  -  total flux cleaned = -0.00167074 Jy
! Component: 150  -  total flux cleaned = -0.0019406 Jy
! Component: 200  -  total flux cleaned = -0.00219159 Jy
! Component: 250  -  total flux cleaned = -0.00235954 Jy
! Component: 300  -  total flux cleaned = -0.00229612 Jy
! Component: 350  -  total flux cleaned = -0.00223623 Jy
! Component: 400  -  total flux cleaned = -0.00209219 Jy
! Component: 450  -  total flux cleaned = -0.00206446 Jy
! Component: 500  -  total flux cleaned = -0.00195763 Jy
! Component: 550  -  total flux cleaned = -0.00175445 Jy
! Component: 600  -  total flux cleaned = -0.00165712 Jy
! Component: 650  -  total flux cleaned = -0.00156233 Jy
! Component: 700  -  total flux cleaned = -0.00154009 Jy
! Component: 750  -  total flux cleaned = -0.00143034 Jy
! Component: 800  -  total flux cleaned = -0.0013029 Jy
! Component: 850  -  total flux cleaned = -0.00119854 Jy
! Component: 900  -  total flux cleaned = -0.00103579 Jy
! Component: 950  -  total flux cleaned = -0.000956813 Jy
! Component: 1000  -  total flux cleaned = -0.000841206 Jy
! Component: 1050  -  total flux cleaned = -0.000803655 Jy
! Component: 1100  -  total flux cleaned = -0.000711629 Jy
! Component: 1150  -  total flux cleaned = -0.000657939 Jy
! Component: 1200  -  total flux cleaned = -0.000553099 Jy
! Component: 1250  -  total flux cleaned = -0.000484727 Jy
! Component: 1300  -  total flux cleaned = -0.000334157 Jy
! Component: 1350  -  total flux cleaned = -0.000284895 Jy
! Component: 1400  -  total flux cleaned = -0.000220421 Jy
! Component: 1450  -  total flux cleaned = -0.000125515 Jy
! Component: 1500  -  total flux cleaned = -1.75015e-06 Jy
! Component: 1550  -  total flux cleaned = 5.87085e-05 Jy
! Component: 1600  -  total flux cleaned = 0.000118404 Jy
! Component: 1650  -  total flux cleaned = 0.000176842 Jy
! Component: 1700  -  total flux cleaned = 0.000234085 Jy
! Component: 1750  -  total flux cleaned = 0.000262524 Jy
! Component: 1800  -  total flux cleaned = 0.000276732 Jy
! Component: 1850  -  total flux cleaned = 0.000290794 Jy
! Component: 1900  -  total flux cleaned = 0.000263816 Jy
! Component: 1950  -  total flux cleaned = 0.000304273 Jy
! Component: 2000  -  total flux cleaned = 0.000317467 Jy
! Component: 2050  -  total flux cleaned = 0.000330316 Jy
! Component: 2100  -  total flux cleaned = 0.000343263 Jy
! Component: 2150  -  total flux cleaned = 0.000343191 Jy
! Component: 2200  -  total flux cleaned = 0.000368764 Jy
! Component: 2250  -  total flux cleaned = 0.000431713 Jy
! Component: 2300  -  total flux cleaned = 0.000444138 Jy
! Component: 2350  -  total flux cleaned = 0.000481345 Jy
! Component: 2400  -  total flux cleaned = 0.000518108 Jy
! Component: 2450  -  total flux cleaned = 0.000579056 Jy
! Component: 2500  -  total flux cleaned = 0.000627395 Jy
! Component: 2550  -  total flux cleaned = 0.000699379 Jy
! Component: 2600  -  total flux cleaned = 0.000782728 Jy
! Component: 2650  -  total flux cleaned = 0.000841957 Jy
! Component: 2700  -  total flux cleaned = 0.000936115 Jy
! Component: 2750  -  total flux cleaned = 0.00097118 Jy
! Component: 2800  -  total flux cleaned = 0.00104106 Jy
! Component: 2850  -  total flux cleaned = 0.00109897 Jy
! Component: 2900  -  total flux cleaned = 0.00115661 Jy
! Component: 2950  -  total flux cleaned = 0.00119107 Jy
! Component: 3000  -  total flux cleaned = 0.00125959 Jy
! Component: 3050  -  total flux cleaned = 0.00129368 Jy
! Component: 3100  -  total flux cleaned = 0.00135027 Jy
! Component: 3150  -  total flux cleaned = 0.00138419 Jy
! Component: 3200  -  total flux cleaned = 0.00145169 Jy
! Component: 3250  -  total flux cleaned = 0.00147399 Jy
! Component: 3300  -  total flux cleaned = 0.00151875 Jy
! Component: 3350  -  total flux cleaned = 0.00157438 Jy
! Component: 3400  -  total flux cleaned = 0.00160763 Jy
! Component: 3450  -  total flux cleaned = 0.00162975 Jy
! Component: 3500  -  total flux cleaned = 0.00165182 Jy
! Component: 3550  -  total flux cleaned = 0.0017179 Jy
! Component: 3600  -  total flux cleaned = 0.00173992 Jy
! Component: 3650  -  total flux cleaned = 0.00176181 Jy
! Component: 3700  -  total flux cleaned = 0.00177268 Jy
! Component: 3750  -  total flux cleaned = 0.00178362 Jy
! Component: 3800  -  total flux cleaned = 0.00179453 Jy
! Component: 3850  -  total flux cleaned = 0.00182725 Jy
! Component: 3900  -  total flux cleaned = 0.00180546 Jy
! Component: 3950  -  total flux cleaned = 0.00184894 Jy
! Component: 4000  -  total flux cleaned = 0.00184899 Jy
! Component: 4050  -  total flux cleaned = 0.00185992 Jy
! Total flux subtracted in 4096 components = 0.00184899 Jy
! Clean residual min=-0.000645 max=0.000689 Jy/beam
! Clean residual mean=-0.000003 rms=0.000212 Jy/beam
! Combined flux in latest and established models = 0.247375 Jy
keep
! Adding 361 model components to the UV plane model.
! The established model now contains 492 components and 0.247375 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J2153-1136_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.459 x 28.37 at -10.47 degrees (North through East)
! Clean map  min=-0.0013731  max=0.24462 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J2153-1136_S_map.fits
wmodel /vlbi/uf001/uva//J2153-1136_S_map.mod
! Writing 492 model components to file: /vlbi/uf001/uva//J2153-1136_S_map.mod
wobs   /vlbi/uf001/uva//J2153-1136_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J2153-1136_S_uvs.fits
wwins  /vlbi/uf001/uva//J2153-1136_S_map.win
! wwins: Wrote 2 windows to /vlbi/uf001/uva//J2153-1136_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.244622 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000198568 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.24352 0.24352 0.48704 0.974079 1.94816 3.89632 7.79263 15.5853 31.1705 62.3411
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0005 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.244 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1231.93 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J2153-1136_S_dfm.log closed on Mon Jan 14 06:02:08 2019