! Started logfile: /vlbi/uf001/uva//J2151+0709_X_dfm.log on Mon Jan 14 06:01:35 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uva//J2151+0709_X_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J2151+0709_X_uva.fits ! AN table 1: 42 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.88955 visibilities/baseline/integration-bin. ! Found source: J2151+0709 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 16140 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J2151+0709_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 73 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 73 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 73 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 73 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 73 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 73 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 73 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 73 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 73 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 73 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 73 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 73 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.154852Jy sigma=21.075050 ! Fit after self-cal, rms=0.651890Jy sigma=12.871737 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6437 mas, bmaj=1.575 mas, bpa=-2.881 degrees ! Estimated noise=0.489241 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.260048 Jy ! Component: 100 - total flux cleaned = 0.340292 Jy ! Total flux subtracted in 100 components = 0.340292 Jy ! Clean residual min=-0.066695 max=0.127008 Jy/beam ! Clean residual mean=0.000003 rms=0.011986 Jy/beam ! Combined flux in latest and established models = 0.340292 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.340292 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.364702Jy sigma=6.192829 ! Fit after self-cal, rms=0.363455Jy sigma=6.178107 ! Inverting map ! Added new window around map position (-1.4, -0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.119882 Jy ! Component: 100 - total flux cleaned = 0.191061 Jy ! Total flux subtracted in 100 components = 0.191061 Jy ! Clean residual min=-0.044403 max=0.078515 Jy/beam ! Clean residual mean=0.000004 rms=0.009557 Jy/beam ! Combined flux in latest and established models = 0.531353 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 11 components and 0.531353 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.288963Jy sigma=4.950593 ! Fit after self-cal, rms=0.264083Jy sigma=4.547120 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0917075 Jy ! Component: 100 - total flux cleaned = 0.150014 Jy ! Total flux subtracted in 100 components = 0.150014 Jy ! Clean residual min=-0.035595 max=0.058156 Jy/beam ! Clean residual mean=0.000002 rms=0.006996 Jy/beam ! Combined flux in latest and established models = 0.681367 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 16 components and 0.681367 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.200354Jy sigma=3.493049 ! Fit after self-cal, rms=0.188733Jy sigma=3.291649 ! Inverting map ! Added new window around map position (-0.8, -0.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0743346 Jy ! Component: 100 - total flux cleaned = 0.119073 Jy ! Total flux subtracted in 100 components = 0.119073 Jy ! Clean residual min=-0.027465 max=0.040280 Jy/beam ! Clean residual mean=0.000002 rms=0.004840 Jy/beam ! Combined flux in latest and established models = 0.80044 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 25 components and 0.80044 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.137769Jy sigma=2.438438 ! Fit after self-cal, rms=0.131044Jy sigma=2.316299 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0460653 Jy ! Component: 100 - total flux cleaned = 0.0723585 Jy ! Total flux subtracted in 100 components = 0.0723585 Jy ! Clean residual min=-0.020996 max=0.030881 Jy/beam ! Clean residual mean=0.000001 rms=0.003668 Jy/beam ! Combined flux in latest and established models = 0.872798 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 32 components and 0.872798 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.106557Jy sigma=1.898597 ! Fit after self-cal, rms=0.103366Jy sigma=1.836907 ! Inverting map ! Added new window around map position (1, 0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0321484 Jy ! Component: 100 - total flux cleaned = 0.0519749 Jy ! Total flux subtracted in 100 components = 0.0519749 Jy ! Clean residual min=-0.016754 max=0.018687 Jy/beam ! Clean residual mean=0.000001 rms=0.002916 Jy/beam ! Combined flux in latest and established models = 0.924773 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 41 components and 0.924773 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.091031Jy sigma=1.613272 ! Fit after self-cal, rms=0.090278Jy sigma=1.596632 ! Inverting map ! Added new window around map position (2, 4.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0201443 Jy ! Component: 100 - total flux cleaned = 0.0326216 Jy ! Total flux subtracted in 100 components = 0.0326216 Jy ! Clean residual min=-0.014302 max=0.015349 Jy/beam ! Clean residual mean=0.000001 rms=0.002582 Jy/beam ! Combined flux in latest and established models = 0.957395 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 49 components and 0.957395 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.085171Jy sigma=1.498866 ! Fit after self-cal, rms=0.084879Jy sigma=1.491743 ! Inverting map ! Added new window around map position (0.6, 2.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0114382 Jy ! Component: 100 - total flux cleaned = 0.0164427 Jy ! Total flux subtracted in 100 components = 0.0164427 Jy ! Clean residual min=-0.013854 max=0.012935 Jy/beam ! Clean residual mean=0.000001 rms=0.002362 Jy/beam ! Combined flux in latest and established models = 0.973837 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 55 components and 0.973837 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081888Jy sigma=1.437669 ! Fit after self-cal, rms=0.081763Jy sigma=1.434983 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7733 mas, bmaj=1.802 mas, bpa=-2.817 degrees ! Estimated noise=0.329494 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0113798 Jy ! Component: 100 - total flux cleaned = 0.0197034 Jy ! Component: 150 - total flux cleaned = 0.0259409 Jy ! Component: 200 - total flux cleaned = 0.0294584 Jy ! Total flux subtracted in 200 components = 0.0294584 Jy ! Clean residual min=-0.013192 max=0.014888 Jy/beam ! Clean residual mean=0.000000 rms=0.002624 Jy/beam ! Combined flux in latest and established models = 1.0033 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 67 components and 1.0033 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.079386Jy sigma=1.391042 ! Fit after self-cal, rms=0.079291Jy sigma=1.388300 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7733 x 1.802 at -2.817 degrees (North through East) ! Clean map min=-0.012839 max=0.33483 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 HN 0.95 KP 1.04 LA 0.99 ! MK 0.96 NL 1.06 OV 0.90 PT 0.95 ! SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 HN 0.95 KP 1.04 LA 1.00 ! MK 0.97 NL 1.07 OV 0.90 PT 0.95 ! SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 HN 0.96 KP 1.04 LA 0.99 ! MK 0.94 NL 1.06 OV 0.91 PT 0.94 ! SC 0.98 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 HN 0.95 KP 1.04 LA 1.00 ! MK 0.94 NL 1.08 OV 0.91 PT 0.96 ! SC 1.02 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 HN 0.96 KP 1.05 LA 1.00 ! MK 0.98 NL 1.08 OV 0.92 PT 0.96 ! SC 1.00 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 HN 0.97 KP 1.06 LA 0.99 ! MK 0.97 NL 1.07 OV 0.91 PT 0.96 ! SC 1.01 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 HN 0.98 KP 1.06 LA 1.01 ! MK 0.97 NL 1.07 OV 0.93 PT 0.96 ! SC 1.01 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 HN 0.99 KP 1.07 LA 1.00 ! MK 0.96 NL 1.07 OV 0.91 PT 0.96 ! SC 1.04 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 HN 0.99 KP 1.06 LA 1.01 ! MK 0.96 NL 1.08 OV 0.93 PT 0.97 ! SC 1.02 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 HN 1.00 KP 1.06 LA 1.01 ! MK 0.98 NL 1.08 OV 0.92 PT 0.97 ! SC 1.02 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 HN 0.97 KP 1.08 LA 1.01 ! MK 0.98 NL 1.09 OV 0.93 PT 0.97 ! SC 1.03 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 HN 0.99 KP 1.06 LA 1.02 ! MK 0.99 NL 1.08 OV 0.93 PT 0.95 ! SC 1.03 ! ! ! Fit before self-cal, rms=0.079291Jy sigma=1.388300 ! Fit after self-cal, rms=0.069995Jy sigma=1.227566 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7689 mas, bmaj=1.813 mas, bpa=-3.296 degrees ! Estimated noise=0.327421 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00353278 Jy ! Component: 100 - total flux cleaned = -0.00679394 Jy ! Component: 150 - total flux cleaned = -0.00960356 Jy ! Component: 200 - total flux cleaned = -0.0121673 Jy ! Total flux subtracted in 200 components = -0.0121673 Jy ! Clean residual min=-0.007272 max=0.007689 Jy/beam ! Clean residual mean=0.000001 rms=0.001426 Jy/beam ! Combined flux in latest and established models = 0.991128 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 78 components and 0.991128 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068374Jy sigma=1.193940 ! Fit after self-cal, rms=0.068289Jy sigma=1.190532 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068289Jy sigma=1.190532 ! Fit after self-cal, rms=0.066890Jy sigma=1.157058 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7661 mas, bmaj=1.817 mas, bpa=-3.534 degrees ! Estimated noise=0.327037 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000316192 Jy ! Component: 100 - total flux cleaned = -0.00181614 Jy ! Component: 150 - total flux cleaned = -0.00391652 Jy ! Component: 200 - total flux cleaned = -0.00557868 Jy ! Total flux subtracted in 200 components = -0.00557868 Jy ! Clean residual min=-0.006040 max=0.006411 Jy/beam ! Clean residual mean=0.000000 rms=0.001080 Jy/beam ! Combined flux in latest and established models = 0.985549 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 91 components and 0.985549 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065905Jy sigma=1.137894 ! Fit after self-cal, rms=0.065854Jy sigma=1.135367 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2.4, -4.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00091415 Jy ! Component: 100 - total flux cleaned = 0.000375781 Jy ! Component: 150 - total flux cleaned = -0.000747609 Jy ! Component: 200 - total flux cleaned = -0.00146771 Jy ! Total flux subtracted in 200 components = -0.00146771 Jy ! Clean residual min=-0.004866 max=0.004480 Jy/beam ! Clean residual mean=0.000000 rms=0.000953 Jy/beam ! Combined flux in latest and established models = 0.984082 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 106 components and 0.984082 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064966Jy sigma=1.115114 ! Fit after self-cal, rms=0.064935Jy sigma=1.114532 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064935Jy sigma=1.114532 ! Fit after self-cal, rms=0.065044Jy sigma=1.112408 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7653 mas, bmaj=1.817 mas, bpa=-3.6 degrees ! Estimated noise=0.327277 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0012991 Jy ! Component: 100 - total flux cleaned = -0.0028306 Jy ! Component: 150 - total flux cleaned = -0.00356645 Jy ! Component: 200 - total flux cleaned = -0.00413214 Jy ! Total flux subtracted in 200 components = -0.00413214 Jy ! Clean residual min=-0.004198 max=0.004168 Jy/beam ! Clean residual mean=-0.000000 rms=0.000859 Jy/beam ! Combined flux in latest and established models = 0.97995 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 110 components and 0.97995 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064541Jy sigma=1.102466 ! Fit after self-cal, rms=0.064532Jy sigma=1.102115 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2.6, 1.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000279864 Jy ! Component: 100 - total flux cleaned = 1.03857e-05 Jy ! Component: 150 - total flux cleaned = -0.000834622 Jy ! Component: 200 - total flux cleaned = -0.00159878 Jy ! Total flux subtracted in 200 components = -0.00159878 Jy ! Clean residual min=-0.003537 max=0.003623 Jy/beam ! Clean residual mean=-0.000000 rms=0.000784 Jy/beam ! Combined flux in latest and established models = 0.978351 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 126 components and 0.978351 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064071Jy sigma=1.090029 ! Fit after self-cal, rms=0.064046Jy sigma=1.089666 ! Inverting map ! Added new window around map position (-16, 16.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00190442 Jy ! Component: 100 - total flux cleaned = 0.00190249 Jy ! Component: 150 - total flux cleaned = 0.00152706 Jy ! Component: 200 - total flux cleaned = 0.00109387 Jy ! Total flux subtracted in 200 components = 0.00109387 Jy ! Clean residual min=-0.003181 max=0.003289 Jy/beam ! Clean residual mean=-0.000000 rms=0.000729 Jy/beam ! Combined flux in latest and established models = 0.979445 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 142 components and 0.979445 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063745Jy sigma=1.083228 ! Fit after self-cal, rms=0.063729Jy sigma=1.082992 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063729Jy sigma=1.082992 ! Fit after self-cal, rms=0.063786Jy sigma=1.081883 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.801 mas, bmaj=2.943 mas, bpa=-5.245 degrees ! Estimated noise=0.504076 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00384559 Jy ! Component: 100 - total flux cleaned = -0.00521448 Jy ! Component: 150 - total flux cleaned = -0.00577376 Jy ! Component: 200 - total flux cleaned = -0.0060163 Jy ! Total flux subtracted in 200 components = -0.0060163 Jy ! Clean residual min=-0.003538 max=0.003641 Jy/beam ! Clean residual mean=-0.000000 rms=0.000955 Jy/beam ! Combined flux in latest and established models = 0.973428 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 161 components and 0.973428 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063670Jy sigma=1.081311 ! Fit after self-cal, rms=0.063663Jy sigma=1.080915 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000678439 Jy ! Component: 100 - total flux cleaned = -0.000684742 Jy ! Component: 150 - total flux cleaned = -0.000584446 Jy ! Component: 200 - total flux cleaned = -0.000354151 Jy ! Total flux subtracted in 200 components = -0.000354151 Jy ! Clean residual min=-0.003353 max=0.003638 Jy/beam ! Clean residual mean=-0.000000 rms=0.000925 Jy/beam ! Combined flux in latest and established models = 0.973074 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 179 components and 0.973074 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063590Jy sigma=1.080359 ! Fit after self-cal, rms=0.063593Jy sigma=1.080154 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.7647 mas, bmaj=1.819 mas, bpa=-3.688 degrees ! Estimated noise=0.327354 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7647 x 1.819 at -3.688 degrees (North through East) ! Clean map min=-0.0046372 max=0.32898 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.637 mas, bmaj=1.59 mas, bpa=-3.658 degrees ! Estimated noise=0.484841 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.28579 Jy ! Component: 100 - total flux cleaned = 0.451608 Jy ! Component: 150 - total flux cleaned = 0.565769 Jy ! Component: 200 - total flux cleaned = 0.648895 Jy ! Total flux subtracted in 200 components = 0.648895 Jy ! Clean residual min=-0.022930 max=0.047586 Jy/beam ! Clean residual mean=0.000002 rms=0.005139 Jy/beam ! Combined flux in latest and established models = 0.648895 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.648895 Jy ! Inverting map and beam ! Estimated beam: bmin=0.7647 mas, bmaj=1.819 mas, bpa=-3.688 degrees ! Estimated noise=0.327354 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.102259 Jy ! Component: 100 - total flux cleaned = 0.164443 Jy ! Component: 150 - total flux cleaned = 0.205014 Jy ! Component: 200 - total flux cleaned = 0.233373 Jy ! Total flux subtracted in 200 components = 0.233373 Jy ! Clean residual min=-0.009042 max=0.016054 Jy/beam ! Clean residual mean=-0.000002 rms=0.002424 Jy/beam ! Combined flux in latest and established models = 0.882268 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 34 components and 0.882269 Jy ! Inverting map ! Added new window around map position (-1, 1.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0202215 Jy ! Component: 100 - total flux cleaned = 0.0350029 Jy ! Component: 150 - total flux cleaned = 0.0443264 Jy ! Component: 200 - total flux cleaned = 0.0508431 Jy ! Total flux subtracted in 200 components = 0.0508431 Jy ! Clean residual min=-0.005863 max=0.007029 Jy/beam ! Clean residual mean=-0.000001 rms=0.001236 Jy/beam ! Combined flux in latest and established models = 0.933112 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 58 components and 0.933112 Jy ! Inverting map ! Added new window around map position (3.8, -10). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00600015 Jy ! Component: 100 - total flux cleaned = 0.0107013 Jy ! Component: 150 - total flux cleaned = 0.0147915 Jy ! Component: 200 - total flux cleaned = 0.0181686 Jy ! Total flux subtracted in 200 components = 0.0181686 Jy ! Clean residual min=-0.004416 max=0.005504 Jy/beam ! Clean residual mean=-0.000001 rms=0.000907 Jy/beam ! Combined flux in latest and established models = 0.95128 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 76 components and 0.95128 Jy ! Inverting map ! Added new window around map position (0.8, -2.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00463872 Jy ! Component: 100 - total flux cleaned = 0.00723498 Jy ! Component: 150 - total flux cleaned = 0.00927534 Jy ! Component: 200 - total flux cleaned = 0.0108486 Jy ! Total flux subtracted in 200 components = 0.0108486 Jy ! Clean residual min=-0.003720 max=0.003476 Jy/beam ! Clean residual mean=-0.000000 rms=0.000756 Jy/beam ! Combined flux in latest and established models = 0.962129 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 96 components and 0.962129 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.801 mas, bmaj=2.943 mas, bpa=-5.245 degrees ! Estimated noise=0.504076 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00327245 Jy ! Component: 100 - total flux cleaned = 0.00507026 Jy ! Component: 150 - total flux cleaned = 0.00637604 Jy ! Component: 200 - total flux cleaned = 0.00702724 Jy ! Total flux subtracted in 200 components = 0.00702724 Jy ! Clean residual min=-0.003468 max=0.003590 Jy/beam ! Clean residual mean=-0.000000 rms=0.000953 Jy/beam ! Combined flux in latest and established models = 0.969156 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000643257 Jy ! Component: 100 - total flux cleaned = 0.00105092 Jy ! Component: 150 - total flux cleaned = 0.00132254 Jy ! Component: 200 - total flux cleaned = 0.00158107 Jy ! Total flux subtracted in 200 components = 0.00158107 Jy ! Clean residual min=-0.003292 max=0.003413 Jy/beam ! Clean residual mean=-0.000000 rms=0.000922 Jy/beam ! Combined flux in latest and established models = 0.970737 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 135 components and 0.970738 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.7647 mas, bmaj=1.819 mas, bpa=-3.688 degrees ! Estimated noise=0.327354 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000495612 Jy ! Component: 100 - total flux cleaned = 4.17273e-05 Jy ! Component: 150 - total flux cleaned = 3.94916e-05 Jy ! Component: 200 - total flux cleaned = 3.24675e-05 Jy ! Total flux subtracted in 200 components = 3.24675e-05 Jy ! Clean residual min=-0.002921 max=0.002868 Jy/beam ! Clean residual mean=-0.000000 rms=0.000631 Jy/beam ! Combined flux in latest and established models = 0.97077 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 147 components and 0.97077 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063423Jy sigma=1.075790 ! Fit after self-cal, rms=0.063289Jy sigma=1.072627 wmodel J2151+0709_X_map.mod ! Writing 147 model components to file: J2151+0709_X_map.mod wobs J2151+0709_X_uvs.fits ! Writing UV FITS file: J2151+0709_X_uvs.fits wwins J2151+0709_X_map.win ! wwins: Wrote 12 windows to J2151+0709_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000199295 Jy ! Component: 100 - total flux cleaned = -0.000492258 Jy ! Component: 150 - total flux cleaned = -0.000445641 Jy ! Component: 200 - total flux cleaned = -0.00048895 Jy ! Component: 250 - total flux cleaned = -0.00027627 Jy ! Component: 300 - total flux cleaned = -0.000112288 Jy ! Component: 350 - total flux cleaned = 8.73971e-05 Jy ! Component: 400 - total flux cleaned = 0.000241751 Jy ! Component: 450 - total flux cleaned = 0.000355138 Jy ! Component: 500 - total flux cleaned = 0.00039273 Jy ! Component: 550 - total flux cleaned = 0.000501159 Jy ! Component: 600 - total flux cleaned = 0.000536771 Jy ! Component: 650 - total flux cleaned = 0.000571082 Jy ! Component: 700 - total flux cleaned = 0.000537596 Jy ! Component: 750 - total flux cleaned = 0.000636669 Jy ! Component: 800 - total flux cleaned = 0.000798363 Jy ! Component: 850 - total flux cleaned = 0.000766268 Jy ! Component: 900 - total flux cleaned = 0.000767056 Jy ! Component: 950 - total flux cleaned = 0.000859388 Jy ! Component: 1000 - total flux cleaned = 0.000768341 Jy ! Component: 1050 - total flux cleaned = 0.000828031 Jy ! Component: 1100 - total flux cleaned = 0.000798815 Jy ! Component: 1150 - total flux cleaned = 0.00085662 Jy ! Component: 1200 - total flux cleaned = 0.000741633 Jy ! Component: 1250 - total flux cleaned = 0.000657112 Jy ! Component: 1300 - total flux cleaned = 0.000628985 Jy ! Component: 1350 - total flux cleaned = 0.000518989 Jy ! Component: 1400 - total flux cleaned = 0.000627732 Jy ! Component: 1450 - total flux cleaned = 0.000573488 Jy ! Component: 1500 - total flux cleaned = 0.000440969 Jy ! Component: 1550 - total flux cleaned = 0.000389145 Jy ! Component: 1600 - total flux cleaned = 0.000363467 Jy ! Component: 1650 - total flux cleaned = 0.000312258 Jy ! Component: 1700 - total flux cleaned = 0.000236745 Jy ! Component: 1750 - total flux cleaned = 0.000112114 Jy ! Component: 1800 - total flux cleaned = 1.38251e-05 Jy ! Component: 1850 - total flux cleaned = -3.45815e-05 Jy ! Component: 1900 - total flux cleaned = -5.82699e-05 Jy ! Component: 1950 - total flux cleaned = -0.000129502 Jy ! Component: 2000 - total flux cleaned = -0.000200701 Jy ! Component: 2050 - total flux cleaned = -0.000200608 Jy ! Component: 2100 - total flux cleaned = -0.000177447 Jy ! Component: 2150 - total flux cleaned = -0.000246228 Jy ! Component: 2200 - total flux cleaned = -0.000291527 Jy ! Component: 2250 - total flux cleaned = -0.000246885 Jy ! Component: 2300 - total flux cleaned = -0.000269419 Jy ! Component: 2350 - total flux cleaned = -0.000466822 Jy ! Component: 2400 - total flux cleaned = -0.000358167 Jy ! Component: 2450 - total flux cleaned = -0.000508783 Jy ! Component: 2500 - total flux cleaned = -0.000444354 Jy ! Component: 2550 - total flux cleaned = -0.000402372 Jy ! Component: 2600 - total flux cleaned = -0.000507028 Jy ! Component: 2650 - total flux cleaned = -0.000465479 Jy ! Component: 2700 - total flux cleaned = -0.000526904 Jy ! Component: 2750 - total flux cleaned = -0.000425375 Jy ! Component: 2800 - total flux cleaned = -0.000526442 Jy ! Component: 2850 - total flux cleaned = -0.000646684 Jy ! Component: 2900 - total flux cleaned = -0.000685962 Jy ! Component: 2950 - total flux cleaned = -0.000705897 Jy ! Component: 3000 - total flux cleaned = -0.000686551 Jy ! Component: 3050 - total flux cleaned = -0.000782999 Jy ! Component: 3100 - total flux cleaned = -0.000859498 Jy ! Component: 3150 - total flux cleaned = -0.000859534 Jy ! Component: 3200 - total flux cleaned = -0.000972438 Jy ! Component: 3250 - total flux cleaned = -0.00100975 Jy ! Component: 3300 - total flux cleaned = -0.00106525 Jy ! Component: 3350 - total flux cleaned = -0.00113885 Jy ! Component: 3400 - total flux cleaned = -0.00123013 Jy ! Component: 3450 - total flux cleaned = -0.00115793 Jy ! Component: 3500 - total flux cleaned = -0.00131921 Jy ! Component: 3550 - total flux cleaned = -0.00139027 Jy ! Component: 3600 - total flux cleaned = -0.00139037 Jy ! Component: 3650 - total flux cleaned = -0.00144267 Jy ! Component: 3700 - total flux cleaned = -0.00159889 Jy ! Component: 3750 - total flux cleaned = -0.00161633 Jy ! Component: 3800 - total flux cleaned = -0.00170161 Jy ! Component: 3850 - total flux cleaned = -0.00182025 Jy ! Component: 3900 - total flux cleaned = -0.00187053 Jy ! Component: 3950 - total flux cleaned = -0.00185369 Jy ! Component: 4000 - total flux cleaned = -0.0019697 Jy ! Component: 4050 - total flux cleaned = -0.00201898 Jy ! Total flux subtracted in 4096 components = -0.00205155 Jy ! Clean residual min=-0.000813 max=0.000977 Jy/beam ! Clean residual mean=-0.000000 rms=0.000285 Jy/beam ! Combined flux in latest and established models = 0.968719 Jy keep ! Adding 318 model components to the UV plane model. ! The established model now contains 464 components and 0.968719 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J2151+0709_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7647 x 1.819 at -3.688 degrees (North through East) ! Clean map min=-0.0039705 max=0.32366 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J2151+0709_X_map.fits wmodel /vlbi/uf001/uva//J2151+0709_X_map.mod ! Writing 464 model components to file: /vlbi/uf001/uva//J2151+0709_X_map.mod wobs /vlbi/uf001/uva//J2151+0709_X_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J2151+0709_X_uvs.fits wwins /vlbi/uf001/uva//J2151+0709_X_map.win ! wwins: Wrote 13 windows to /vlbi/uf001/uva//J2151+0709_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.323655 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000283515 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.262794 0.262794 0.525588 1.05118 2.10235 4.2047 8.4094 16.8188 33.6376 67.2752 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.323 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1141.58 quit ! Quitting program ! Log file /vlbi/uf001/uva//J2151+0709_X_dfm.log closed on Mon Jan 14 06:01:41 2019