! Started logfile: /vlbi/uf001/uva//J2150-1822_S_dfm.log on Mon Jan 14 06:01:08 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J2150-1822_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J2150-1822_S_uva.fits
! AN table 1: 28 integrations on 28 of 28 possible baselines.
! Apparent sampling: 0.857143 visibilities/baseline/integration-bin.
! Found source: J2150-1822
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 2016 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J2150-1822_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 57 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 57 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 57 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.010916Jy  sigma=18.835361
! Fit after  self-cal, rms=0.875569Jy  sigma=16.315458
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.049 mas, bmaj=28.22 mas, bpa=-8.927 degrees
! Estimated noise=1.12402 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0991219 Jy
! Component: 100  -  total flux cleaned = 0.120752 Jy
! Total flux subtracted in 100 components = 0.120752 Jy
! Clean residual min=-0.004819 max=0.006297 Jy/beam
! Clean residual mean=-0.000006 rms=0.001614 Jy/beam
! Combined flux in latest and established models = 0.120752 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.120752 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.066272Jy  sigma=1.191348
! Fit after  self-cal, rms=0.066262Jy  sigma=1.191280
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.583 mas, bmaj=30.91 mas, bpa=-8.656 degrees
! Estimated noise=1.00053 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00655623 Jy
! Component: 100  -  total flux cleaned = 0.00944339 Jy
! Component: 150  -  total flux cleaned = 0.0103802 Jy
! Component: 200  -  total flux cleaned = 0.0103467 Jy
! Total flux subtracted in 200 components = 0.0103467 Jy
! Clean residual min=-0.004337 max=0.003638 Jy/beam
! Clean residual mean=-0.000013 rms=0.001197 Jy/beam
! Combined flux in latest and established models = 0.131099 Jy
! Performing phase self-cal
! Adding 49 model components to the UV plane model.
! The established model now contains 54 components and 0.131099 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.065692Jy  sigma=1.179749
! Fit after  self-cal, rms=0.065704Jy  sigma=1.179612
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.583 x 30.91 at -8.656 degrees (North through East)
! Clean map  min=-0.0042223  max=0.12709 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        0.96     HN        0.98     KP        1.06     
!   LA        1.01     NL        1.00     OV        0.98     PT        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        0.93     HN        1.03     KP        1.07     
!   LA        0.96     NL        1.00     OV        0.91     PT        1.04     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.06     HN        1.10     KP        0.98     
!   LA        0.93     NL        1.01     OV        0.98     PT        1.01     
! 
! 
! Fit before self-cal, rms=0.065704Jy  sigma=1.179612
! Fit after  self-cal, rms=0.065502Jy  sigma=1.170017
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.625 mas, bmaj=30.76 mas, bpa=-8.538 degrees
! Estimated noise=0.99538 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00101766 Jy
! Component: 100  -  total flux cleaned = -0.00115948 Jy
! Component: 150  -  total flux cleaned = -0.00110998 Jy
! Component: 200  -  total flux cleaned = -0.00102372 Jy
! Total flux subtracted in 200 components = -0.00102372 Jy
! Clean residual min=-0.003437 max=0.003284 Jy/beam
! Clean residual mean=-0.000017 rms=0.001032 Jy/beam
! Combined flux in latest and established models = 0.130075 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 80 components and 0.130075 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.065471Jy  sigma=1.169543
! Fit after  self-cal, rms=0.065502Jy  sigma=1.169338
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.065502Jy  sigma=1.169338
! Fit after  self-cal, rms=0.065563Jy  sigma=1.164324
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.626 mas, bmaj=30.71 mas, bpa=-8.544 degrees
! Estimated noise=0.995601 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000252323 Jy
! Component: 100  -  total flux cleaned = -0.000204449 Jy
! Component: 150  -  total flux cleaned = -0.000140878 Jy
! Component: 200  -  total flux cleaned = -8.12025e-05 Jy
! Total flux subtracted in 200 components = -8.12025e-05 Jy
! Clean residual min=-0.003319 max=0.003407 Jy/beam
! Clean residual mean=-0.000006 rms=0.000918 Jy/beam
! Combined flux in latest and established models = 0.129994 Jy
selfcal
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 105 components and 0.129994 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.065547Jy  sigma=1.164043
! Fit after  self-cal, rms=0.065572Jy  sigma=1.163967
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.6655e-05 Jy
! Component: 100  -  total flux cleaned = 0.000149155 Jy
! Component: 150  -  total flux cleaned = 0.000219501 Jy
! Component: 200  -  total flux cleaned = 0.000269459 Jy
! Total flux subtracted in 200 components = 0.000269459 Jy
! Clean residual min=-0.003304 max=0.003370 Jy/beam
! Clean residual mean=-0.000006 rms=0.000911 Jy/beam
! Combined flux in latest and established models = 0.130263 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 119 components and 0.130263 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.065562Jy  sigma=1.163812
! Fit after  self-cal, rms=0.065563Jy  sigma=1.163806
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.065563Jy  sigma=1.163806
! Fit after  self-cal, rms=0.065689Jy  sigma=1.163423
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.625 mas, bmaj=30.67 mas, bpa=-8.535 degrees
! Estimated noise=0.995371 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000100132 Jy
! Component: 100  -  total flux cleaned = -4.04642e-05 Jy
! Component: 150  -  total flux cleaned = 1.37539e-05 Jy
! Component: 200  -  total flux cleaned = 6.42525e-05 Jy
! Total flux subtracted in 200 components = 6.42525e-05 Jy
! Clean residual min=-0.003239 max=0.003448 Jy/beam
! Clean residual mean=-0.000003 rms=0.000887 Jy/beam
! Combined flux in latest and established models = 0.130328 Jy
selfcal
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 128 components and 0.130328 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.065679Jy  sigma=1.163212
! Fit after  self-cal, rms=0.065692Jy  sigma=1.163199
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.1888e-05 Jy
! Component: 100  -  total flux cleaned = 7.54535e-05 Jy
! Component: 150  -  total flux cleaned = 0.000121276 Jy
! Component: 200  -  total flux cleaned = 0.00016551 Jy
! Total flux subtracted in 200 components = 0.00016551 Jy
! Clean residual min=-0.003241 max=0.003419 Jy/beam
! Clean residual mean=-0.000003 rms=0.000883 Jy/beam
! Combined flux in latest and established models = 0.130493 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 135 components and 0.130493 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.065684Jy  sigma=1.163092
! Fit after  self-cal, rms=0.065685Jy  sigma=1.163086
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.065685Jy  sigma=1.163086
! Fit after  self-cal, rms=0.065727Jy  sigma=1.163041
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.014 mas, bmaj=30.88 mas, bpa=-8.047 degrees
! Estimated noise=1.05789 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.44076e-07 Jy
! Component: 100  -  total flux cleaned = -3.09618e-05 Jy
! Component: 150  -  total flux cleaned = -7.05852e-05 Jy
! Component: 200  -  total flux cleaned = -0.000106834 Jy
! Total flux subtracted in 200 components = -0.000106834 Jy
! Clean residual min=-0.002739 max=0.003298 Jy/beam
! Clean residual mean=-0.000002 rms=0.000856 Jy/beam
! Combined flux in latest and established models = 0.130386 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 147 components and 0.130386 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.065724Jy  sigma=1.162945
! Fit after  self-cal, rms=0.065728Jy  sigma=1.162934
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.65683e-06 Jy
! Component: 100  -  total flux cleaned = -2.15679e-05 Jy
! Component: 150  -  total flux cleaned = -3.2716e-05 Jy
! Component: 200  -  total flux cleaned = -3.30671e-05 Jy
! Total flux subtracted in 200 components = -3.30671e-05 Jy
! Clean residual min=-0.002722 max=0.003288 Jy/beam
! Clean residual mean=-0.000002 rms=0.000850 Jy/beam
! Combined flux in latest and established models = 0.130353 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 158 components and 0.130353 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.065726Jy  sigma=1.162871
! Fit after  self-cal, rms=0.065727Jy  sigma=1.162868
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=5.623 mas, bmaj=30.65 mas, bpa=-8.527 degrees
! Estimated noise=0.995418 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.623 x 30.65 at -8.527 degrees (North through East)
! Clean map  min=-0.0032286  max=0.12668 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.093 mas, bmaj=27.94 mas, bpa=-8.765 degrees
! Estimated noise=1.11376 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0981581 Jy
! Component: 100  -  total flux cleaned = 0.119638 Jy
! Component: 150  -  total flux cleaned = 0.125459 Jy
! Component: 200  -  total flux cleaned = 0.128416 Jy
! Total flux subtracted in 200 components = 0.128416 Jy
! Clean residual min=-0.003841 max=0.003537 Jy/beam
! Clean residual mean=0.000002 rms=0.001019 Jy/beam
! Combined flux in latest and established models = 0.128416 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 37 model components to the UV plane model.
! The established model now contains 37 components and 0.128416 Jy
! Inverting map and beam 
! Estimated beam: bmin=5.623 mas, bmaj=30.65 mas, bpa=-8.527 degrees
! Estimated noise=0.995418 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.002054 Jy
! Component: 100  -  total flux cleaned = 0.0021943 Jy
! Component: 150  -  total flux cleaned = 0.00230397 Jy
! Component: 200  -  total flux cleaned = 0.00239556 Jy
! Total flux subtracted in 200 components = 0.00239556 Jy
! Clean residual min=-0.003302 max=0.003473 Jy/beam
! Clean residual mean=-0.000004 rms=0.000901 Jy/beam
! Combined flux in latest and established models = 0.130811 Jy
! Adding 46 model components to the UV plane model.
! The established model now contains 80 components and 0.130811 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.014 mas, bmaj=30.88 mas, bpa=-8.047 degrees
! Estimated noise=1.05789 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.52589e-05 Jy
! Component: 100  -  total flux cleaned = -3.02786e-05 Jy
! Component: 150  -  total flux cleaned = -0.000109144 Jy
! Component: 200  -  total flux cleaned = -0.000180761 Jy
! Total flux subtracted in 200 components = -0.000180761 Jy
! Clean residual min=-0.002751 max=0.003273 Jy/beam
! Clean residual mean=-0.000003 rms=0.000870 Jy/beam
! Combined flux in latest and established models = 0.130631 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.88899e-05 Jy
! Component: 100  -  total flux cleaned = -0.000110089 Jy
! Component: 150  -  total flux cleaned = -0.000152916 Jy
! Component: 200  -  total flux cleaned = -0.000193784 Jy
! Total flux subtracted in 200 components = -0.000193784 Jy
! Clean residual min=-0.002743 max=0.003270 Jy/beam
! Clean residual mean=-0.000002 rms=0.000861 Jy/beam
! Combined flux in latest and established models = 0.130437 Jy
! Adding 48 model components to the UV plane model.
! The established model now contains 121 components and 0.130437 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=5.623 mas, bmaj=30.65 mas, bpa=-8.527 degrees
! Estimated noise=0.995418 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000159699 Jy
! Component: 100  -  total flux cleaned = -0.000160293 Jy
! Component: 150  -  total flux cleaned = -0.0001056 Jy
! Component: 200  -  total flux cleaned = -3.96187e-05 Jy
! Total flux subtracted in 200 components = -3.96187e-05 Jy
! Clean residual min=-0.003194 max=0.003355 Jy/beam
! Clean residual mean=-0.000002 rms=0.000878 Jy/beam
! Combined flux in latest and established models = 0.130397 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 139 components and 0.130397 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.065726Jy  sigma=1.163003
! Fit after  self-cal, rms=0.065728Jy  sigma=1.162938
wmodel J2150-1822_S_map.mod
! Writing 139 model components to file: J2150-1822_S_map.mod
wobs   J2150-1822_S_uvs.fits
! Writing UV FITS file: J2150-1822_S_uvs.fits
wwins  J2150-1822_S_map.win
! wwins: Wrote 1 windows to J2150-1822_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000266835 Jy
! Component: 100  -  total flux cleaned = 0.000318161 Jy
! Component: 150  -  total flux cleaned = 0.000369185 Jy
! Component: 200  -  total flux cleaned = 0.000280868 Jy
! Component: 250  -  total flux cleaned = 0.000408345 Jy
! Component: 300  -  total flux cleaned = 0.000487182 Jy
! Component: 350  -  total flux cleaned = 0.000713781 Jy
! Component: 400  -  total flux cleaned = 0.000855776 Jy
! Component: 450  -  total flux cleaned = 0.000819995 Jy
! Component: 500  -  total flux cleaned = 0.000884733 Jy
! Component: 550  -  total flux cleaned = 0.000852867 Jy
! Component: 600  -  total flux cleaned = 0.000945847 Jy
! Component: 650  -  total flux cleaned = 0.00100516 Jy
! Component: 700  -  total flux cleaned = 0.00103407 Jy
! Component: 750  -  total flux cleaned = 0.001034 Jy
! Component: 800  -  total flux cleaned = 0.00097945 Jy
! Component: 850  -  total flux cleaned = 0.00100647 Jy
! Component: 900  -  total flux cleaned = 0.000822867 Jy
! Component: 950  -  total flux cleaned = 0.000694439 Jy
! Component: 1000  -  total flux cleaned = 0.000618459 Jy
! Component: 1050  -  total flux cleaned = 0.00051902 Jy
! Component: 1100  -  total flux cleaned = 0.000445736 Jy
! Component: 1150  -  total flux cleaned = 0.000373872 Jy
! Component: 1200  -  total flux cleaned = 0.000302831 Jy
! Component: 1250  -  total flux cleaned = 0.000232507 Jy
! Component: 1300  -  total flux cleaned = 0.000117119 Jy
! Component: 1350  -  total flux cleaned = 2.6409e-05 Jy
! Component: 1400  -  total flux cleaned = -0.000129958 Jy
! Component: 1450  -  total flux cleaned = -0.000261808 Jy
! Component: 1500  -  total flux cleaned = -0.000413966 Jy
! Component: 1550  -  total flux cleaned = -0.000478616 Jy
! Component: 1600  -  total flux cleaned = -0.000648772 Jy
! Component: 1650  -  total flux cleaned = -0.000732998 Jy
! Component: 1700  -  total flux cleaned = -0.000795628 Jy
! Component: 1750  -  total flux cleaned = -0.000939859 Jy
! Component: 1800  -  total flux cleaned = -0.00106215 Jy
! Component: 1850  -  total flux cleaned = -0.00118318 Jy
! Component: 1900  -  total flux cleaned = -0.00122316 Jy
! Component: 1950  -  total flux cleaned = -0.00134178 Jy
! Component: 2000  -  total flux cleaned = -0.00143977 Jy
! Component: 2050  -  total flux cleaned = -0.00149814 Jy
! Component: 2100  -  total flux cleaned = -0.00151745 Jy
! Component: 2150  -  total flux cleaned = -0.00155565 Jy
! Component: 2200  -  total flux cleaned = -0.00159383 Jy
! Component: 2250  -  total flux cleaned = -0.00165072 Jy
! Component: 2300  -  total flux cleaned = -0.00166959 Jy
! Component: 2350  -  total flux cleaned = -0.00168834 Jy
! Component: 2400  -  total flux cleaned = -0.00172558 Jy
! Component: 2450  -  total flux cleaned = -0.00174393 Jy
! Component: 2500  -  total flux cleaned = -0.00170696 Jy
! Component: 2550  -  total flux cleaned = -0.00170686 Jy
! Component: 2600  -  total flux cleaned = -0.00168856 Jy
! Component: 2650  -  total flux cleaned = -0.00170685 Jy
! Component: 2700  -  total flux cleaned = -0.00167055 Jy
! Component: 2750  -  total flux cleaned = -0.00167052 Jy
! Component: 2800  -  total flux cleaned = -0.00163448 Jy
! Component: 2850  -  total flux cleaned = -0.00163446 Jy
! Component: 2900  -  total flux cleaned = -0.00165223 Jy
! Component: 2950  -  total flux cleaned = -0.00163435 Jy
! Component: 3000  -  total flux cleaned = -0.00159886 Jy
! Component: 3050  -  total flux cleaned = -0.00163425 Jy
! Component: 3100  -  total flux cleaned = -0.00156354 Jy
! Component: 3150  -  total flux cleaned = -0.00154589 Jy
! Component: 3200  -  total flux cleaned = -0.00152844 Jy
! Component: 3250  -  total flux cleaned = -0.00154595 Jy
! Component: 3300  -  total flux cleaned = -0.00156348 Jy
! Component: 3350  -  total flux cleaned = -0.00152845 Jy
! Component: 3400  -  total flux cleaned = -0.00158078 Jy
! Component: 3450  -  total flux cleaned = -0.00154585 Jy
! Component: 3500  -  total flux cleaned = -0.00158071 Jy
! Component: 3550  -  total flux cleaned = -0.00154585 Jy
! Component: 3600  -  total flux cleaned = -0.00154568 Jy
! Component: 3650  -  total flux cleaned = -0.00154579 Jy
! Component: 3700  -  total flux cleaned = -0.00151106 Jy
! Component: 3750  -  total flux cleaned = -0.00152846 Jy
! Component: 3800  -  total flux cleaned = -0.00154582 Jy
! Component: 3850  -  total flux cleaned = -0.00158057 Jy
! Component: 3900  -  total flux cleaned = -0.00156325 Jy
! Component: 3950  -  total flux cleaned = -0.00156322 Jy
! Component: 4000  -  total flux cleaned = -0.00159789 Jy
! Component: 4050  -  total flux cleaned = -0.00159789 Jy
! Total flux subtracted in 4096 components = -0.00163278 Jy
! Clean residual min=-0.001328 max=0.001166 Jy/beam
! Clean residual mean=-0.000003 rms=0.000356 Jy/beam
! Combined flux in latest and established models = 0.128764 Jy
keep
! Adding 404 model components to the UV plane model.
! The established model now contains 543 components and 0.128764 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J2150-1822_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.623 x 30.65 at -8.527 degrees (North through East)
! Clean map  min=-0.0043347  max=0.12687 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J2150-1822_S_map.fits
wmodel /vlbi/uf001/uva//J2150-1822_S_map.mod
! Writing 543 model components to file: /vlbi/uf001/uva//J2150-1822_S_map.mod
wobs   /vlbi/uf001/uva//J2150-1822_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J2150-1822_S_uvs.fits
wwins  /vlbi/uf001/uva//J2150-1822_S_map.win
! wwins: Wrote 2 windows to /vlbi/uf001/uva//J2150-1822_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.126868 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000353336 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.835517 0.835517 1.67103 3.34207 6.68414 13.3683 26.7365 53.4731
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.001 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.126 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  359.059 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J2150-1822_S_dfm.log closed on Mon Jan 14 06:01:12 2019