! Started logfile: /vlbi/uf001/uvm//J2134-0153_X_b_dfm.log on Sun Jan 13 22:35:24 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uvm//J2134-0153_X_b_uvm.fits ! Reading UV FITS file: /vlbi/uf001/uvm//J2134-0153_X_b_uvm.fits ! AN table 1: 5 integrations on 45 of 45 possible baselines. ! AN table 2: 14 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.799726 visibilities/baseline/integration-bin. ! Found source: J2134-0153 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 6996 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J2134-0153_X_b] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 15 telescope corrections were flagged in sub-array 1. ! A total of 66 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 15 telescope corrections were flagged in sub-array 1. ! A total of 66 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 15 telescope corrections were flagged in sub-array 1. ! A total of 66 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 15 telescope corrections were flagged in sub-array 1. ! A total of 66 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 5. ! A total of 15 telescope corrections were flagged in sub-array 1. ! A total of 66 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 6. ! A total of 15 telescope corrections were flagged in sub-array 1. ! A total of 66 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 7. ! A total of 15 telescope corrections were flagged in sub-array 1. ! A total of 66 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 8. ! A total of 15 telescope corrections were flagged in sub-array 1. ! A total of 66 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 9. ! A total of 15 telescope corrections were flagged in sub-array 1. ! A total of 66 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 10. ! A total of 15 telescope corrections were flagged in sub-array 1. ! A total of 66 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 11. ! A total of 15 telescope corrections were flagged in sub-array 1. ! A total of 66 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 12. ! A total of 15 telescope corrections were flagged in sub-array 1. ! A total of 66 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.534376Jy sigma=19.277607 ! Fit after self-cal, rms=0.424418Jy sigma=4.923117 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6797 mas, bmaj=1.852 mas, bpa=-9.407 degrees ! Estimated noise=1.22437 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.747589 Jy ! Component: 100 - total flux cleaned = 0.95153 Jy ! Total flux subtracted in 100 components = 0.95153 Jy ! Clean residual min=-0.082329 max=0.170382 Jy/beam ! Clean residual mean=-0.000038 rms=0.017510 Jy/beam ! Combined flux in latest and established models = 0.95153 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.95153 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.433793Jy sigma=4.868618 ! Fit after self-cal, rms=0.433168Jy sigma=4.864456 ! Inverting map ! Added new window around map position (2.4, -0.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.167644 Jy ! Component: 100 - total flux cleaned = 0.266991 Jy ! Total flux subtracted in 100 components = 0.266991 Jy ! Clean residual min=-0.057004 max=0.087428 Jy/beam ! Clean residual mean=0.000004 rms=0.012062 Jy/beam ! Combined flux in latest and established models = 1.21852 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 15 components and 1.21852 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.313906Jy sigma=3.563708 ! Fit after self-cal, rms=0.307705Jy sigma=3.452051 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0826291 Jy ! Component: 100 - total flux cleaned = 0.141814 Jy ! Total flux subtracted in 100 components = 0.141814 Jy ! Clean residual min=-0.041737 max=0.051059 Jy/beam ! Clean residual mean=0.000026 rms=0.009517 Jy/beam ! Combined flux in latest and established models = 1.36033 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 17 components and 1.36033 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.260956Jy sigma=2.994984 ! Fit after self-cal, rms=0.259888Jy sigma=2.972682 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8564 mas, bmaj=2.38 mas, bpa=-11.9 degrees ! Estimated noise=0.864028 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0726606 Jy ! Component: 100 - total flux cleaned = 0.119853 Jy ! Component: 150 - total flux cleaned = 0.152921 Jy ! Component: 200 - total flux cleaned = 0.176323 Jy ! Total flux subtracted in 200 components = 0.176323 Jy ! Clean residual min=-0.045603 max=0.046193 Jy/beam ! Clean residual mean=0.000059 rms=0.011000 Jy/beam ! Combined flux in latest and established models = 1.53666 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 30 components and 1.53666 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.224542Jy sigma=2.688371 ! Fit after self-cal, rms=0.223969Jy sigma=2.677948 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8564 x 2.38 at -11.9 degrees (North through East) ! Clean map min=-0.042763 max=1.0174 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.94 HN 0.93 KP 0.96 ! LA 0.92 MK 0.99 NL 0.97 OV 0.88 ! PT 0.86 SC 1.05 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 1.00 HN 1.09 KP 1.05 ! LA 1.19 MK 1.05 NL 1.14 OV 0.91 ! PT 0.93 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.95 HN 0.95 KP 0.97 ! LA 0.92 MK 1.02 NL 0.96 OV 0.87 ! PT 0.86 SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.06 FD 0.93 HN 1.09 KP 1.02 ! LA 1.14 MK 1.07 NL 1.09 OV 0.95 ! PT 0.92 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.93 HN 0.92 KP 0.96 ! LA 0.93 MK 0.98 NL 0.99 OV 0.90 ! PT 0.86 SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 0.95 HN 1.07 KP 1.00 ! LA 1.21 MK 1.02 NL 1.12 OV 0.97 ! PT 0.95 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.97 HN 0.94 KP 0.92 ! LA 0.92 MK 1.03 NL 0.97 OV 0.88 ! PT 0.88 SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.06 FD 0.94 HN 1.09 KP 1.04 ! LA 1.10 MK 1.04 NL 1.13 OV 0.94 ! PT 0.91 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.97 HN 0.94 KP 0.93 ! LA 0.92 MK 1.00 NL 1.00 OV 0.89 ! PT 0.88 SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 0.94 HN 1.12 KP 1.03 ! LA 1.17 MK 1.03 NL 1.09 OV 0.93 ! PT 0.93 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.96 HN 0.94 KP 0.94 ! LA 0.93 MK 1.01 NL 0.95 OV 0.87 ! PT 0.86 SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 0.94 HN 1.09 KP 1.03 ! LA 1.17 MK 1.01 NL 1.13 OV 0.95 ! PT 0.91 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.95 HN 0.97 KP 0.93 ! LA 0.92 MK 1.00 NL 0.99 OV 0.89 ! PT 0.86 SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 0.96 HN 1.14 KP 1.03 ! LA 1.10 MK 1.04 NL 1.12 OV 0.92 ! PT 0.91 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.96 HN 0.93 KP 0.94 ! LA 0.92 MK 1.02 NL 0.97 OV 0.87 ! PT 0.86 SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 0.93 HN 1.10 KP 1.03 ! LA 1.13 MK 1.05 NL 1.08 OV 0.92 ! PT 0.95 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.95 HN 0.95 KP 0.93 ! LA 0.91 MK 0.99 NL 0.97 OV 0.90 ! PT 0.88 SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 0.93 HN 1.12 KP 1.05 ! LA 1.18 MK 1.00 NL 1.06 OV 0.94 ! PT 0.91 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.95 HN 0.94 KP 0.96 ! LA 0.93 MK 1.00 NL 0.98 OV 0.85 ! PT 0.87 SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 0.94 HN 1.11 KP 1.02 ! LA 1.19 MK 1.01 NL 1.08 OV 0.92 ! PT 0.94 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.93 HN 0.97 KP 0.94 ! LA 0.92 MK 1.00 NL 0.95 OV 0.88 ! PT 0.86 SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 0.93 HN 1.13 KP 1.03 ! LA 1.07 MK 1.04 NL 1.12 OV 0.93 ! PT 0.92 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.94 HN 0.95 KP 0.92 ! LA 0.91 MK 1.01 NL 0.98 OV 0.86 ! PT 0.87 SC 1.04 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 0.97 HN 1.12 KP 1.01 ! LA 1.17 MK 1.03 NL 1.10 OV 0.93 ! PT 0.93 ! ! ! Fit before self-cal, rms=0.223969Jy sigma=2.677948 ! Fit after self-cal, rms=0.184876Jy sigma=2.076618 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.864 mas, bmaj=2.372 mas, bpa=-11.45 degrees ! Estimated noise=0.859756 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0134047 Jy ! Component: 100 - total flux cleaned = 0.0138118 Jy ! Component: 150 - total flux cleaned = 0.0152031 Jy ! Component: 200 - total flux cleaned = 0.0161042 Jy ! Total flux subtracted in 200 components = 0.0161042 Jy ! Clean residual min=-0.035685 max=0.033590 Jy/beam ! Clean residual mean=0.000025 rms=0.008705 Jy/beam ! Combined flux in latest and established models = 1.55276 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 52 components and 1.55276 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.182428Jy sigma=2.041346 ! Fit after self-cal, rms=0.182175Jy sigma=2.038663 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.182175Jy sigma=2.038663 ! Fit after self-cal, rms=0.093216Jy sigma=1.062798 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8624 mas, bmaj=2.366 mas, bpa=-11.28 degrees ! Estimated noise=0.85813 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0016173 Jy ! Component: 100 - total flux cleaned = 0.00446099 Jy ! Component: 150 - total flux cleaned = 0.00577988 Jy ! Component: 200 - total flux cleaned = 0.00748301 Jy ! Total flux subtracted in 200 components = 0.00748301 Jy ! Clean residual min=-0.016145 max=0.019572 Jy/beam ! Clean residual mean=0.000009 rms=0.003426 Jy/beam ! Combined flux in latest and established models = 1.56024 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 59 components and 1.56024 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.090145Jy sigma=1.018176 ! Fit after self-cal, rms=0.089971Jy sigma=1.013980 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (5, -0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0175838 Jy ! Component: 100 - total flux cleaned = 0.0215568 Jy ! Component: 150 - total flux cleaned = 0.0237884 Jy ! Component: 200 - total flux cleaned = 0.0254306 Jy ! Total flux subtracted in 200 components = 0.0254306 Jy ! Clean residual min=-0.013992 max=0.013395 Jy/beam ! Clean residual mean=0.000015 rms=0.002886 Jy/beam ! Combined flux in latest and established models = 1.58567 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 77 components and 1.58568 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.085399Jy sigma=0.951670 ! Fit after self-cal, rms=0.085115Jy sigma=0.948300 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.085115Jy sigma=0.948300 ! Fit after self-cal, rms=0.083232Jy sigma=0.934285 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8619 mas, bmaj=2.359 mas, bpa=-11.2 degrees ! Estimated noise=0.857572 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00318359 Jy ! Component: 100 - total flux cleaned = 0.00684113 Jy ! Component: 150 - total flux cleaned = 0.00905714 Jy ! Component: 200 - total flux cleaned = 0.0101882 Jy ! Total flux subtracted in 200 components = 0.0101882 Jy ! Clean residual min=-0.012453 max=0.011945 Jy/beam ! Clean residual mean=0.000012 rms=0.002431 Jy/beam ! Combined flux in latest and established models = 1.59586 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 84 components and 1.59586 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081514Jy sigma=0.907046 ! Fit after self-cal, rms=0.081391Jy sigma=0.905963 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00124889 Jy ! Component: 100 - total flux cleaned = 0.0022581 Jy ! Component: 150 - total flux cleaned = 0.00320234 Jy ! Component: 200 - total flux cleaned = 0.00373477 Jy ! Total flux subtracted in 200 components = 0.00373477 Jy ! Clean residual min=-0.011701 max=0.010991 Jy/beam ! Clean residual mean=0.000013 rms=0.002334 Jy/beam ! Combined flux in latest and established models = 1.5996 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 88 components and 1.5996 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.080599Jy sigma=0.892865 ! Fit after self-cal, rms=0.080541Jy sigma=0.892597 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.080541Jy sigma=0.892597 ! Fit after self-cal, rms=0.079818Jy sigma=0.887738 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.069 mas, bmaj=3.552 mas, bpa=-6.474 degrees ! Estimated noise=1.18141 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00108283 Jy ! Component: 100 - total flux cleaned = 0.00288501 Jy ! Component: 150 - total flux cleaned = 0.00395582 Jy ! Component: 200 - total flux cleaned = 0.00470863 Jy ! Total flux subtracted in 200 components = 0.00470863 Jy ! Clean residual min=-0.014362 max=0.010536 Jy/beam ! Clean residual mean=0.000024 rms=0.003022 Jy/beam ! Combined flux in latest and established models = 1.60431 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 103 components and 1.60431 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.079287Jy sigma=0.881089 ! Fit after self-cal, rms=0.079190Jy sigma=0.879989 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.98782e-05 Jy ! Component: 100 - total flux cleaned = 0.000492538 Jy ! Component: 150 - total flux cleaned = 0.000376905 Jy ! Component: 200 - total flux cleaned = 0.000262299 Jy ! Total flux subtracted in 200 components = 0.000262299 Jy ! Clean residual min=-0.013615 max=0.010160 Jy/beam ! Clean residual mean=0.000024 rms=0.002921 Jy/beam ! Combined flux in latest and established models = 1.60457 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 109 components and 1.60457 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.079078Jy sigma=0.878578 ! Fit after self-cal, rms=0.079050Jy sigma=0.878187 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8615 mas, bmaj=2.356 mas, bpa=-11.16 degrees ! Estimated noise=0.857273 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8615 x 2.356 at -11.16 degrees (North through East) ! Clean map min=-0.010545 max=1.0103 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.079050Jy sigma=0.878187 ! Fit after self-cal, rms=0.074683Jy sigma=0.823743 ! Inverting map and beam ! Estimated beam: bmin=0.862 mas, bmaj=2.352 mas, bpa=-11.08 degrees ! Estimated noise=0.859175 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00210429 Jy ! Component: 100 - total flux cleaned = 0.00284565 Jy ! Component: 150 - total flux cleaned = 0.00333887 Jy ! Component: 200 - total flux cleaned = 0.00409433 Jy ! Total flux subtracted in 200 components = 0.00409433 Jy ! Clean residual min=-0.009831 max=0.008636 Jy/beam ! Clean residual mean=0.000010 rms=0.001810 Jy/beam ! Combined flux in latest and established models = 1.60866 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 120 components and 1.60866 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073984Jy sigma=0.810624 ! Fit after self-cal, rms=0.073930Jy sigma=0.810276 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000138537 Jy ! Component: 100 - total flux cleaned = 0.000548966 Jy ! Component: 150 - total flux cleaned = 0.000932702 Jy ! Component: 200 - total flux cleaned = 0.00117136 Jy ! Total flux subtracted in 200 components = 0.00117136 Jy ! Clean residual min=-0.009285 max=0.008338 Jy/beam ! Clean residual mean=0.000010 rms=0.001762 Jy/beam ! Combined flux in latest and established models = 1.60984 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 121 components and 1.60984 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073543Jy sigma=0.803357 ! Fit after self-cal, rms=0.073505Jy sigma=0.803194 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073505Jy sigma=0.803194 ! Fit after self-cal, rms=0.073272Jy sigma=0.801906 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6824 mas, bmaj=1.828 mas, bpa=-8.342 degrees ! Estimated noise=1.23313 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.750316 Jy ! Component: 100 - total flux cleaned = 0.982344 Jy ! Component: 150 - total flux cleaned = 1.12933 Jy ! Component: 200 - total flux cleaned = 1.22829 Jy ! Total flux subtracted in 200 components = 1.22829 Jy ! Clean residual min=-0.035353 max=0.070004 Jy/beam ! Clean residual mean=-0.000038 rms=0.007920 Jy/beam ! Combined flux in latest and established models = 1.22829 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 1.22829 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8619 mas, bmaj=2.351 mas, bpa=-11.06 degrees ! Estimated noise=0.859407 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1, -0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.110916 Jy ! Component: 100 - total flux cleaned = 0.178876 Jy ! Component: 150 - total flux cleaned = 0.224365 Jy ! Component: 200 - total flux cleaned = 0.257305 Jy ! Total flux subtracted in 200 components = 0.257305 Jy ! Clean residual min=-0.014577 max=0.018970 Jy/beam ! Clean residual mean=-0.000016 rms=0.003826 Jy/beam ! Combined flux in latest and established models = 1.48559 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 37 components and 1.48559 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0249671 Jy ! Component: 100 - total flux cleaned = 0.0441195 Jy ! Component: 150 - total flux cleaned = 0.0592277 Jy ! Component: 200 - total flux cleaned = 0.071703 Jy ! Total flux subtracted in 200 components = 0.071703 Jy ! Clean residual min=-0.010539 max=0.009557 Jy/beam ! Clean residual mean=-0.000001 rms=0.002271 Jy/beam ! Combined flux in latest and established models = 1.5573 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 69 components and 1.5573 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.07 mas, bmaj=3.545 mas, bpa=-6.304 degrees ! Estimated noise=1.18454 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0171155 Jy ! Component: 100 - total flux cleaned = 0.0282992 Jy ! Component: 150 - total flux cleaned = 0.0361099 Jy ! Component: 200 - total flux cleaned = 0.0417838 Jy ! Total flux subtracted in 200 components = 0.0417838 Jy ! Clean residual min=-0.011874 max=0.008447 Jy/beam ! Clean residual mean=0.000015 rms=0.002436 Jy/beam ! Combined flux in latest and established models = 1.59908 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00281522 Jy ! Component: 100 - total flux cleaned = 0.00413904 Jy ! Component: 150 - total flux cleaned = 0.0049071 Jy ! Component: 200 - total flux cleaned = 0.00570613 Jy ! Total flux subtracted in 200 components = 0.00570613 Jy ! Clean residual min=-0.011280 max=0.007603 Jy/beam ! Clean residual mean=0.000018 rms=0.002339 Jy/beam ! Combined flux in latest and established models = 1.60479 Jy ! Adding 67 model components to the UV plane model. ! The established model now contains 125 components and 1.60479 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8619 mas, bmaj=2.351 mas, bpa=-11.06 degrees ! Estimated noise=0.859407 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000894068 Jy ! Component: 100 - total flux cleaned = 0.000330397 Jy ! Component: 150 - total flux cleaned = 0.00125031 Jy ! Component: 200 - total flux cleaned = 0.00174646 Jy ! Total flux subtracted in 200 components = 0.00174646 Jy ! Clean residual min=-0.007896 max=0.006311 Jy/beam ! Clean residual mean=0.000009 rms=0.001621 Jy/beam ! Combined flux in latest and established models = 1.60653 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 147 components and 1.60653 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.072632Jy sigma=0.797286 ! Fit after self-cal, rms=0.072142Jy sigma=0.788531 wmodel J2134-0153_X_b_map.mod ! Writing 147 model components to file: J2134-0153_X_b_map.mod wobs J2134-0153_X_b_uvs.fits ! Writing UV FITS file: J2134-0153_X_b_uvs.fits wwins J2134-0153_X_b_map.win ! wwins: Wrote 4 windows to J2134-0153_X_b_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00334796 Jy ! Component: 100 - total flux cleaned = -0.00488392 Jy ! Component: 150 - total flux cleaned = -0.00608845 Jy ! Component: 200 - total flux cleaned = -0.00691444 Jy ! Component: 250 - total flux cleaned = -0.00770053 Jy ! Component: 300 - total flux cleaned = -0.00807561 Jy ! Component: 350 - total flux cleaned = -0.0084365 Jy ! Component: 400 - total flux cleaned = -0.00869705 Jy ! Component: 450 - total flux cleaned = -0.00894654 Jy ! Component: 500 - total flux cleaned = -0.00894467 Jy ! Component: 550 - total flux cleaned = -0.00886645 Jy ! Component: 600 - total flux cleaned = -0.00886613 Jy ! Component: 650 - total flux cleaned = -0.00879197 Jy ! Component: 700 - total flux cleaned = -0.00886371 Jy ! Component: 750 - total flux cleaned = -0.00886196 Jy ! Component: 800 - total flux cleaned = -0.00893064 Jy ! Component: 850 - total flux cleaned = -0.00906509 Jy ! Component: 900 - total flux cleaned = -0.00919225 Jy ! Component: 950 - total flux cleaned = -0.00906366 Jy ! Component: 1000 - total flux cleaned = -0.0088172 Jy ! Component: 1050 - total flux cleaned = -0.00893924 Jy ! Component: 1100 - total flux cleaned = -0.0088797 Jy ! Component: 1150 - total flux cleaned = -0.00905499 Jy ! Component: 1200 - total flux cleaned = -0.00905543 Jy ! Component: 1250 - total flux cleaned = -0.00916827 Jy ! Component: 1300 - total flux cleaned = -0.00944186 Jy ! Component: 1350 - total flux cleaned = -0.0095493 Jy ! Component: 1400 - total flux cleaned = -0.00981346 Jy ! Component: 1450 - total flux cleaned = -0.010073 Jy ! Component: 1500 - total flux cleaned = -0.0102764 Jy ! Component: 1550 - total flux cleaned = -0.0104265 Jy ! Component: 1600 - total flux cleaned = -0.0105249 Jy ! Component: 1650 - total flux cleaned = -0.0108164 Jy ! Component: 1700 - total flux cleaned = -0.0110561 Jy ! Component: 1750 - total flux cleaned = -0.011009 Jy ! Component: 1800 - total flux cleaned = -0.0112886 Jy ! Component: 1850 - total flux cleaned = -0.0115643 Jy ! Component: 1900 - total flux cleaned = -0.0119698 Jy ! Component: 1950 - total flux cleaned = -0.012236 Jy ! Component: 2000 - total flux cleaned = -0.0123675 Jy ! Component: 2050 - total flux cleaned = -0.0125409 Jy ! Component: 2100 - total flux cleaned = -0.0127967 Jy ! Component: 2150 - total flux cleaned = -0.013049 Jy ! Component: 2200 - total flux cleaned = -0.0132562 Jy ! Component: 2250 - total flux cleaned = -0.013502 Jy ! Component: 2300 - total flux cleaned = -0.0137433 Jy ! Component: 2350 - total flux cleaned = -0.0139814 Jy ! Component: 2400 - total flux cleaned = -0.0140206 Jy ! Component: 2450 - total flux cleaned = -0.0142154 Jy ! Component: 2500 - total flux cleaned = -0.0145599 Jy ! Component: 2550 - total flux cleaned = -0.0147477 Jy ! Component: 2600 - total flux cleaned = -0.014971 Jy ! Component: 2650 - total flux cleaned = -0.0152287 Jy ! Component: 2700 - total flux cleaned = -0.0154834 Jy ! Component: 2750 - total flux cleaned = -0.0158066 Jy ! Component: 2800 - total flux cleaned = -0.0159484 Jy ! Component: 2850 - total flux cleaned = -0.0162636 Jy ! Component: 2900 - total flux cleaned = -0.0165067 Jy ! Component: 2950 - total flux cleaned = -0.0168825 Jy ! Component: 3000 - total flux cleaned = -0.0170855 Jy ! Component: 3050 - total flux cleaned = -0.0173198 Jy ! Component: 3100 - total flux cleaned = -0.0174515 Jy ! Component: 3150 - total flux cleaned = -0.0177793 Jy ! Component: 3200 - total flux cleaned = -0.0181679 Jy ! Component: 3250 - total flux cleaned = -0.0182636 Jy ! Component: 3300 - total flux cleaned = -0.018486 Jy ! Component: 3350 - total flux cleaned = -0.0187372 Jy ! Component: 3400 - total flux cleaned = -0.0188618 Jy ! Component: 3450 - total flux cleaned = -0.0190161 Jy ! Component: 3500 - total flux cleaned = -0.0191074 Jy ! Component: 3550 - total flux cleaned = -0.0193188 Jy ! Component: 3600 - total flux cleaned = -0.0193792 Jy ! Component: 3650 - total flux cleaned = -0.0196166 Jy ! Component: 3700 - total flux cleaned = -0.0196164 Jy ! Component: 3750 - total flux cleaned = -0.0197622 Jy ! Component: 3800 - total flux cleaned = -0.0199347 Jy ! Component: 3850 - total flux cleaned = -0.019992 Jy ! Component: 3900 - total flux cleaned = -0.0201055 Jy ! Component: 3950 - total flux cleaned = -0.0202179 Jy ! Component: 4000 - total flux cleaned = -0.0203289 Jy ! Component: 4050 - total flux cleaned = -0.0204119 Jy ! Total flux subtracted in 4096 components = -0.020549 Jy ! Clean residual min=-0.001659 max=0.001666 Jy/beam ! Clean residual mean=0.000002 rms=0.000476 Jy/beam ! Combined flux in latest and established models = 1.58598 Jy keep ! Adding 312 model components to the UV plane model. ! The established model now contains 459 components and 1.58598 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uvm//J2134-0153_X_b_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8619 x 2.351 at -11.06 degrees (North through East) ! Clean map min=-0.0034294 max=1.0188 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uvm//J2134-0153_X_b_map.fits wmodel /vlbi/uf001/uvm//J2134-0153_X_b_map.mod ! Writing 459 model components to file: /vlbi/uf001/uvm//J2134-0153_X_b_map.mod wobs /vlbi/uf001/uvm//J2134-0153_X_b_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uvm//J2134-0153_X_b_uvs.fits wwins /vlbi/uf001/uvm//J2134-0153_X_b_map.win ! wwins: Wrote 5 windows to /vlbi/uf001/uvm//J2134-0153_X_b_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 1.01877 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000468998 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.138108 0.138108 0.276215 0.552431 1.10486 2.20972 4.41944 8.83889 17.6778 35.3556 70.7111 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0014 print "peak= ", int(1000*peak_flux)/1000 ! peak= 1.018 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 2172.22 quit ! Quitting program ! Log file /vlbi/uf001/uvm//J2134-0153_X_b_dfm.log closed on Sun Jan 13 22:35:28 2019