! Started logfile: /vlbi/uf001/uva//J2134+4050_X_dfm.log on Mon Jan 14 05:53:56 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uva//J2134+4050_X_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J2134+4050_X_uva.fits ! AN table 1: 19 integrations on 28 of 28 possible baselines. ! AN table 2: 19 integrations on 28 of 28 possible baselines. ! AN table 3: 19 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.976545 visibilities/baseline/integration-bin. ! Found source: J2134+4050 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 20484 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J2134+4050_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 1 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! A total of 46 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 2. ! A total of 1 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! A total of 46 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 3. ! A total of 1 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! A total of 46 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 4. ! A total of 1 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! A total of 46 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 5. ! A total of 1 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! A total of 46 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 6. ! A total of 1 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! A total of 46 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 7. ! A total of 1 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! A total of 46 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 8. ! A total of 1 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! A total of 46 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 9. ! A total of 1 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! A total of 46 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 10. ! A total of 1 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! A total of 46 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 11. ! A total of 1 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! A total of 46 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 12. ! A total of 1 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! A total of 46 telescope corrections were flagged in sub-array 3. ! ! Fit before self-cal, rms=1.011281Jy sigma=24.374398 ! Fit after self-cal, rms=0.876089Jy sigma=21.114723 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.791 mas, bmaj=1.049 mas, bpa=-3.933 degrees ! Estimated noise=0.439141 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0973536 Jy ! Component: 100 - total flux cleaned = 0.12069 Jy ! Total flux subtracted in 100 components = 0.12069 Jy ! Clean residual min=-0.006909 max=0.009355 Jy/beam ! Clean residual mean=0.000002 rms=0.001426 Jy/beam ! Combined flux in latest and established models = 0.12069 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.12069 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059095Jy sigma=1.370520 ! Fit after self-cal, rms=0.059011Jy sigma=1.368916 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0104638 Jy ! Component: 100 - total flux cleaned = 0.0115475 Jy ! Total flux subtracted in 100 components = 0.0115475 Jy ! Clean residual min=-0.005706 max=0.006688 Jy/beam ! Clean residual mean=0.000002 rms=0.001230 Jy/beam ! Combined flux in latest and established models = 0.132237 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 12 components and 0.132237 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057465Jy sigma=1.329855 ! Fit after self-cal, rms=0.057449Jy sigma=1.329476 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.007 mas, bmaj=1.331 mas, bpa=2.852 degrees ! Estimated noise=0.224715 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00133978 Jy ! Component: 100 - total flux cleaned = 0.00133771 Jy ! Component: 150 - total flux cleaned = 0.00133445 Jy ! Component: 200 - total flux cleaned = 0.00133264 Jy ! Total flux subtracted in 200 components = 0.00133264 Jy ! Clean residual min=-0.005553 max=0.006656 Jy/beam ! Clean residual mean=0.000002 rms=0.001408 Jy/beam ! Combined flux in latest and established models = 0.13357 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 14 components and 0.13357 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057098Jy sigma=1.321549 ! Fit after self-cal, rms=0.057075Jy sigma=1.321131 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.007 x 1.331 at 2.852 degrees (North through East) ! Clean map min=-0.00529 max=0.1227 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.96 HN 0.89 KP 0.94 ! LA 1.76 MK 0.98 NL 1.13 SC 0.90 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.06 FD 0.96 KP 0.97 LA 0.84 ! MK 1.02 NL 1.10 OV 0.94 SC 0.96 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 FD 0.93 HN 0.94 KP 0.93 ! LA 0.85 NL 1.19 OV 0.93 PT 1.00* ! SC 0.93 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.00 HN 0.99 KP 0.91 ! LA 1.60 MK 1.02 NL 1.18 SC 0.90 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.09 FD 0.94 KP 0.97 LA 0.84 ! MK 0.94 NL 1.15 OV 0.94 SC 1.01 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.03 FD 0.93 HN 0.91 KP 0.95 ! LA 0.84 NL 1.13 OV 0.92 PT 1.00* ! SC 0.96 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.99 HN 0.96 KP 0.96 ! LA 1.62 MK 0.94 NL 1.23 SC 0.91 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.04 FD 0.91 KP 0.93 LA 0.84 ! MK 1.03 NL 1.14 OV 0.97 SC 0.97 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.05 FD 0.96 HN 0.94 KP 0.88 ! LA 0.86 NL 1.21 OV 0.91 PT 1.00* ! SC 0.92 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.99 HN 0.99 KP 0.95 ! LA 1.65 MK 0.91 NL 1.20 SC 0.90 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.05 FD 0.99 KP 0.96 LA 0.87 ! MK 0.99 NL 1.21 OV 0.89 SC 1.00 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.15 FD 0.95 HN 0.94 KP 0.90 ! LA 0.85 NL 1.15 OV 0.91 PT 1.00* ! SC 0.94 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 0.98 HN 0.92 KP 1.03 ! LA 1.69 MK 0.90 NL 1.20 SC 0.91 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.14 FD 0.96 KP 0.99 LA 0.86 ! MK 0.96 NL 1.12 OV 0.93 SC 0.96 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.09 FD 0.95 HN 0.92 KP 0.93 ! LA 0.85 NL 1.17 OV 0.93 PT 1.00* ! SC 0.91 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 0.93 HN 0.95 KP 0.93 ! LA 1.65 MK 0.97 NL 1.14 SC 0.91 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.06 FD 0.96 KP 0.98 LA 0.88 ! MK 0.99 NL 1.16 OV 0.93 SC 1.00 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.05 FD 0.96 HN 0.87 KP 0.89 ! LA 0.86 NL 1.13 OV 0.93 PT 1.00* ! SC 0.93 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.01 HN 0.91 KP 0.97 ! LA 1.70 MK 0.93 NL 1.22 SC 0.87 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 0.97 KP 1.00 LA 0.84 ! MK 1.04 NL 1.14 OV 0.91 SC 1.04 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.12 FD 0.94 HN 0.93 KP 0.92 ! LA 0.87 NL 1.08 OV 0.87 PT 1.00* ! SC 0.96 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.02 HN 0.92 KP 0.88 ! LA 1.70 MK 0.95 NL 1.15 SC 0.89 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.07 FD 0.96 KP 0.96 LA 0.87 ! MK 1.01 NL 1.18 OV 0.87 SC 1.01 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.07 FD 0.92 HN 0.95 KP 0.91 ! LA 0.86 NL 1.15 OV 0.89 PT 1.00* ! SC 1.00 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.02 HN 0.99 KP 0.99 ! LA 1.59 MK 0.91 NL 1.18 SC 0.93 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.09 FD 0.96 KP 0.95 LA 0.88 ! MK 1.00 NL 1.14 OV 0.95 SC 1.02 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.13 FD 0.95 HN 0.93 KP 0.93 ! LA 0.84 NL 1.16 OV 0.95 PT 1.00* ! SC 0.91 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.02 HN 0.92 KP 0.97 ! LA 1.62 MK 1.00 NL 1.23 SC 0.91 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.07 FD 0.95 KP 0.96 LA 0.85 ! MK 1.04 NL 1.14 OV 0.91 SC 1.03 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.04 FD 0.95 HN 0.92 KP 0.92 ! LA 0.83 NL 1.17 OV 0.91 PT 1.00* ! SC 0.95 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 1.03 HN 1.01 KP 0.97 ! LA 1.78 MK 0.94 NL 1.10 SC 0.95 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.18 FD 0.96 KP 1.01 LA 0.87 ! MK 0.98 NL 1.16 OV 0.90 SC 1.01 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.11 FD 0.99 HN 0.92 KP 0.96 ! LA 0.85 NL 1.14 OV 0.90 PT 1.00* ! SC 0.93 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 0.96 HN 1.00 KP 0.92 ! LA 1.67 MK 0.97 NL 1.14 SC 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.07 FD 0.95 KP 0.99 LA 0.83 ! MK 0.99 NL 1.18 OV 0.89 SC 1.03 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.09 FD 0.94 HN 0.92 KP 0.90 ! LA 0.82 NL 1.19 OV 0.94 PT 1.00* ! SC 0.96 ! ! ! Fit before self-cal, rms=0.057075Jy sigma=1.321131 ! Fit after self-cal, rms=0.056732Jy sigma=1.209989 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9925 mas, bmaj=1.333 mas, bpa=3.142 degrees ! Estimated noise=0.223748 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.6, -1.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00109549 Jy ! Component: 100 - total flux cleaned = 0.00132388 Jy ! Component: 150 - total flux cleaned = 0.00147779 Jy ! Component: 200 - total flux cleaned = 0.00150558 Jy ! Total flux subtracted in 200 components = 0.00150558 Jy ! Clean residual min=-0.001278 max=0.001179 Jy/beam ! Clean residual mean=-0.000000 rms=0.000270 Jy/beam ! Combined flux in latest and established models = 0.135075 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 28 components and 0.135075 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056679Jy sigma=1.208634 ! Fit after self-cal, rms=0.056870Jy sigma=1.207188 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056870Jy sigma=1.207188 ! Fit after self-cal, rms=0.056999Jy sigma=1.207107 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9915 mas, bmaj=1.332 mas, bpa=3.196 degrees ! Estimated noise=0.223713 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000346832 Jy ! Component: 100 - total flux cleaned = 0.000538048 Jy ! Component: 150 - total flux cleaned = 0.000683821 Jy ! Component: 200 - total flux cleaned = 0.000720748 Jy ! Total flux subtracted in 200 components = 0.000720748 Jy ! Clean residual min=-0.001183 max=0.001144 Jy/beam ! Clean residual mean=-0.000000 rms=0.000256 Jy/beam ! Combined flux in latest and established models = 0.135796 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 32 components and 0.135796 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056979Jy sigma=1.206577 ! Fit after self-cal, rms=0.056979Jy sigma=1.206494 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.22225e-05 Jy ! Component: 100 - total flux cleaned = 8.15333e-05 Jy ! Component: 150 - total flux cleaned = 9.78982e-05 Jy ! Component: 200 - total flux cleaned = 0.000127996 Jy ! Total flux subtracted in 200 components = 0.000127996 Jy ! Clean residual min=-0.001123 max=0.001108 Jy/beam ! Clean residual mean=-0.000000 rms=0.000249 Jy/beam ! Combined flux in latest and established models = 0.135924 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 40 components and 0.135924 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056968Jy sigma=1.206215 ! Fit after self-cal, rms=0.056967Jy sigma=1.206171 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056967Jy sigma=1.206171 ! Fit after self-cal, rms=0.056907Jy sigma=1.206128 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9904 mas, bmaj=1.33 mas, bpa=3.373 degrees ! Estimated noise=0.223506 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.69442e-05 Jy ! Component: 100 - total flux cleaned = 0.000281966 Jy ! Component: 150 - total flux cleaned = 0.000365128 Jy ! Component: 200 - total flux cleaned = 0.000415901 Jy ! Total flux subtracted in 200 components = 0.000415901 Jy ! Clean residual min=-0.001072 max=0.001096 Jy/beam ! Clean residual mean=-0.000000 rms=0.000242 Jy/beam ! Combined flux in latest and established models = 0.13634 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 44 components and 0.13634 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056898Jy sigma=1.205898 ! Fit after self-cal, rms=0.056897Jy sigma=1.205865 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4, 16.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00085443 Jy ! Component: 100 - total flux cleaned = 0.00106303 Jy ! Component: 150 - total flux cleaned = 0.00126562 Jy ! Component: 200 - total flux cleaned = 0.00140836 Jy ! Total flux subtracted in 200 components = 0.00140836 Jy ! Clean residual min=-0.001023 max=0.000942 Jy/beam ! Clean residual mean=-0.000000 rms=0.000228 Jy/beam ! Combined flux in latest and established models = 0.137748 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 66 components and 0.137748 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056874Jy sigma=1.205404 ! Fit after self-cal, rms=0.056873Jy sigma=1.205357 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056873Jy sigma=1.205357 ! Fit after self-cal, rms=0.056865Jy sigma=1.205303 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.054 mas, bmaj=2.344 mas, bpa=19.34 degrees ! Estimated noise=0.283073 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000393785 Jy ! Component: 100 - total flux cleaned = 0.000525366 Jy ! Component: 150 - total flux cleaned = 0.000646077 Jy ! Component: 200 - total flux cleaned = 0.000747758 Jy ! Total flux subtracted in 200 components = 0.000747758 Jy ! Clean residual min=-0.000935 max=0.001058 Jy/beam ! Clean residual mean=-0.000000 rms=0.000248 Jy/beam ! Combined flux in latest and established models = 0.138496 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 77 components and 0.138496 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056858Jy sigma=1.205218 ! Fit after self-cal, rms=0.056858Jy sigma=1.205180 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.65152e-05 Jy ! Component: 100 - total flux cleaned = 0.00013655 Jy ! Component: 150 - total flux cleaned = 0.000221269 Jy ! Component: 200 - total flux cleaned = 0.000319374 Jy ! Total flux subtracted in 200 components = 0.000319374 Jy ! Clean residual min=-0.000893 max=0.001080 Jy/beam ! Clean residual mean=-0.000000 rms=0.000247 Jy/beam ! Combined flux in latest and established models = 0.138815 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 86 components and 0.138815 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056855Jy sigma=1.205158 ! Fit after self-cal, rms=0.056854Jy sigma=1.205126 ! Inverting map ! Added new window around map position (27.4, 33). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000885171 Jy ! Component: 100 - total flux cleaned = 0.00091348 Jy ! Component: 150 - total flux cleaned = 0.000996711 Jy ! Component: 200 - total flux cleaned = 0.00103855 Jy ! Total flux subtracted in 200 components = 0.00103855 Jy ! Clean residual min=-0.000923 max=0.000862 Jy/beam ! Clean residual mean=0.000000 rms=0.000220 Jy/beam ! Combined flux in latest and established models = 0.139854 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 117 components and 0.139854 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056841Jy sigma=1.204866 ! Fit after self-cal, rms=0.056841Jy sigma=1.204833 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.9898 mas, bmaj=1.33 mas, bpa=3.564 degrees ! Estimated noise=0.223375 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9898 x 1.33 at 3.564 degrees (North through East) ! Clean map min=-0.00084574 max=0.12201 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7776 mas, bmaj=1.048 mas, bpa=-3.898 degrees ! Estimated noise=0.431731 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0955887 Jy ! Component: 100 - total flux cleaned = 0.119431 Jy ! Component: 150 - total flux cleaned = 0.128757 Jy ! Component: 200 - total flux cleaned = 0.132621 Jy ! Total flux subtracted in 200 components = 0.132621 Jy ! Clean residual min=-0.002764 max=0.002850 Jy/beam ! Clean residual mean=0.000000 rms=0.000591 Jy/beam ! Combined flux in latest and established models = 0.132621 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.132621 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9898 mas, bmaj=1.33 mas, bpa=3.564 degrees ! Estimated noise=0.223375 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00231114 Jy ! Component: 100 - total flux cleaned = 0.00312051 Jy ! Component: 150 - total flux cleaned = 0.00353946 Jy ! Component: 200 - total flux cleaned = 0.00400528 Jy ! Total flux subtracted in 200 components = 0.00400528 Jy ! Clean residual min=-0.001084 max=0.001162 Jy/beam ! Clean residual mean=-0.000000 rms=0.000262 Jy/beam ! Combined flux in latest and established models = 0.136626 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 32 components and 0.136626 Jy ! Inverting map ! Added new window around map position (-6.4, 7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000589356 Jy ! Component: 100 - total flux cleaned = 0.00088338 Jy ! Component: 150 - total flux cleaned = 0.00130073 Jy ! Component: 200 - total flux cleaned = 0.00154565 Jy ! Total flux subtracted in 200 components = 0.00154565 Jy ! Clean residual min=-0.000964 max=0.001010 Jy/beam ! Clean residual mean=-0.000000 rms=0.000238 Jy/beam ! Combined flux in latest and established models = 0.138172 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 45 components and 0.138172 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.054 mas, bmaj=2.344 mas, bpa=19.34 degrees ! Estimated noise=0.283073 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00085054 Jy ! Component: 100 - total flux cleaned = 0.00113574 Jy ! Component: 150 - total flux cleaned = 0.0013185 Jy ! Component: 200 - total flux cleaned = 0.00145986 Jy ! Total flux subtracted in 200 components = 0.00145986 Jy ! Clean residual min=-0.000936 max=0.000934 Jy/beam ! Clean residual mean=-0.000000 rms=0.000235 Jy/beam ! Combined flux in latest and established models = 0.139632 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000110037 Jy ! Component: 100 - total flux cleaned = 0.000160483 Jy ! Component: 150 - total flux cleaned = 0.000192391 Jy ! Component: 200 - total flux cleaned = 0.000251888 Jy ! Total flux subtracted in 200 components = 0.000251888 Jy ! Clean residual min=-0.000898 max=0.000884 Jy/beam ! Clean residual mean=0.000000 rms=0.000224 Jy/beam ! Combined flux in latest and established models = 0.139884 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 94 components and 0.139884 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9898 mas, bmaj=1.33 mas, bpa=3.564 degrees ! Estimated noise=0.223375 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.14967e-06 Jy ! Component: 100 - total flux cleaned = 2.27547e-05 Jy ! Component: 150 - total flux cleaned = 2.48139e-05 Jy ! Component: 200 - total flux cleaned = 2.57325e-05 Jy ! Total flux subtracted in 200 components = 2.57325e-05 Jy ! Clean residual min=-0.000924 max=0.000948 Jy/beam ! Clean residual mean=0.000000 rms=0.000214 Jy/beam ! Combined flux in latest and established models = 0.139909 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 107 components and 0.139909 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056850Jy sigma=1.205048 ! Fit after self-cal, rms=0.056847Jy sigma=1.204880 wmodel J2134+4050_X_map.mod ! Writing 107 model components to file: J2134+4050_X_map.mod wobs J2134+4050_X_uvs.fits ! Writing UV FITS file: J2134+4050_X_uvs.fits wwins J2134+4050_X_map.win ! wwins: Wrote 5 windows to J2134+4050_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 8.2606e-05 Jy ! Component: 100 - total flux cleaned = 0.000254019 Jy ! Component: 150 - total flux cleaned = 0.000433734 Jy ! Component: 200 - total flux cleaned = 0.00057868 Jy ! Component: 250 - total flux cleaned = 0.000607017 Jy ! Component: 300 - total flux cleaned = 0.000662345 Jy ! Component: 350 - total flux cleaned = 0.000716715 Jy ! Component: 400 - total flux cleaned = 0.000730455 Jy ! Component: 450 - total flux cleaned = 0.000809157 Jy ! Component: 500 - total flux cleaned = 0.000834776 Jy ! Component: 550 - total flux cleaned = 0.000847363 Jy ! Component: 600 - total flux cleaned = 0.000909858 Jy ! Component: 650 - total flux cleaned = 0.000983985 Jy ! Component: 700 - total flux cleaned = 0.000996348 Jy ! Component: 750 - total flux cleaned = 0.00104471 Jy ! Component: 800 - total flux cleaned = 0.00109242 Jy ! Component: 850 - total flux cleaned = 0.00113959 Jy ! Component: 900 - total flux cleaned = 0.00118608 Jy ! Component: 950 - total flux cleaned = 0.00124362 Jy ! Component: 1000 - total flux cleaned = 0.00126645 Jy ! Component: 1050 - total flux cleaned = 0.00132299 Jy ! Component: 1100 - total flux cleaned = 0.00132296 Jy ! Component: 1150 - total flux cleaned = 0.0014336 Jy ! Component: 1200 - total flux cleaned = 0.00146659 Jy ! Component: 1250 - total flux cleaned = 0.00155336 Jy ! Component: 1300 - total flux cleaned = 0.00157474 Jy ! Component: 1350 - total flux cleaned = 0.00167073 Jy ! Component: 1400 - total flux cleaned = 0.0017127 Jy ! Component: 1450 - total flux cleaned = 0.00172321 Jy ! Component: 1500 - total flux cleaned = 0.00176476 Jy ! Component: 1550 - total flux cleaned = 0.00181613 Jy ! Component: 1600 - total flux cleaned = 0.00182626 Jy ! Component: 1650 - total flux cleaned = 0.00185663 Jy ! Component: 1700 - total flux cleaned = 0.00189686 Jy ! Component: 1750 - total flux cleaned = 0.00192675 Jy ! Component: 1800 - total flux cleaned = 0.00194654 Jy ! Component: 1850 - total flux cleaned = 0.00203465 Jy ! Component: 1900 - total flux cleaned = 0.00205409 Jy ! Component: 1950 - total flux cleaned = 0.00206382 Jy ! Component: 2000 - total flux cleaned = 0.00209254 Jy ! Component: 2050 - total flux cleaned = 0.00212111 Jy ! Component: 2100 - total flux cleaned = 0.00213992 Jy ! Component: 2150 - total flux cleaned = 0.00215874 Jy ! Component: 2200 - total flux cleaned = 0.00214018 Jy ! Component: 2250 - total flux cleaned = 0.00223259 Jy ! Component: 2300 - total flux cleaned = 0.00225089 Jy ! Component: 2350 - total flux cleaned = 0.00227818 Jy ! Component: 2400 - total flux cleaned = 0.00232339 Jy ! Component: 2450 - total flux cleaned = 0.00231445 Jy ! Component: 2500 - total flux cleaned = 0.00238585 Jy ! Component: 2550 - total flux cleaned = 0.00236807 Jy ! Component: 2600 - total flux cleaned = 0.00236808 Jy ! Component: 2650 - total flux cleaned = 0.00244688 Jy ! Component: 2700 - total flux cleaned = 0.00242951 Jy ! Component: 2750 - total flux cleaned = 0.00242962 Jy ! Component: 2800 - total flux cleaned = 0.00243815 Jy ! Component: 2850 - total flux cleaned = 0.00242113 Jy ! Component: 2900 - total flux cleaned = 0.00244657 Jy ! Component: 2950 - total flux cleaned = 0.00246342 Jy ! Component: 3000 - total flux cleaned = 0.00247179 Jy ! Component: 3050 - total flux cleaned = 0.00245504 Jy ! Component: 3100 - total flux cleaned = 0.00245498 Jy ! Component: 3150 - total flux cleaned = 0.00244666 Jy ! Component: 3200 - total flux cleaned = 0.00247127 Jy ! Component: 3250 - total flux cleaned = 0.00248749 Jy ! Component: 3300 - total flux cleaned = 0.00244694 Jy ! Component: 3350 - total flux cleaned = 0.00247104 Jy ! Component: 3400 - total flux cleaned = 0.00246293 Jy ! Component: 3450 - total flux cleaned = 0.00245498 Jy ! Component: 3500 - total flux cleaned = 0.00243113 Jy ! Component: 3550 - total flux cleaned = 0.00245479 Jy ! Component: 3600 - total flux cleaned = 0.00243906 Jy ! Component: 3650 - total flux cleaned = 0.00245464 Jy ! Component: 3700 - total flux cleaned = 0.00244689 Jy ! Component: 3750 - total flux cleaned = 0.00240827 Jy ! Component: 3800 - total flux cleaned = 0.00245429 Jy ! Component: 3850 - total flux cleaned = 0.00243133 Jy ! Component: 3900 - total flux cleaned = 0.00243897 Jy ! Component: 3950 - total flux cleaned = 0.00242379 Jy ! Component: 4000 - total flux cleaned = 0.00243882 Jy ! Component: 4050 - total flux cleaned = 0.00240143 Jy ! Total flux subtracted in 4096 components = 0.00241625 Jy ! Clean residual min=-0.000480 max=0.000586 Jy/beam ! Clean residual mean=-0.000000 rms=0.000122 Jy/beam ! Combined flux in latest and established models = 0.142326 Jy keep ! Adding 295 model components to the UV plane model. ! The established model now contains 401 components and 0.142326 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J2134+4050_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9898 x 1.33 at 3.564 degrees (North through East) ! Clean map min=-0.00074433 max=0.12165 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J2134+4050_X_map.fits wmodel /vlbi/uf001/uva//J2134+4050_X_map.mod ! Writing 401 model components to file: /vlbi/uf001/uva//J2134+4050_X_map.mod wobs /vlbi/uf001/uva//J2134+4050_X_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J2134+4050_X_uvs.fits wwins /vlbi/uf001/uva//J2134+4050_X_map.win ! wwins: Wrote 6 windows to /vlbi/uf001/uva//J2134+4050_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.121653 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000121175 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.298821 0.298821 0.597643 1.19529 2.39057 4.78114 9.56228 19.1246 38.2491 76.4983 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.121 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1003.94 quit ! Quitting program ! Log file /vlbi/uf001/uva//J2134+4050_X_dfm.log closed on Mon Jan 14 05:54:01 2019