! Started logfile: /vlbi/uf001/uvm//J2131-2036_S_a_dfm.log on Sun Jan 13 22:34:39 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uvm//J2131-2036_S_a_uvm.fits
! Reading UV FITS file: /vlbi/uf001/uvm//J2131-2036_S_a_uvm.fits
! AN table 1: 78 integrations on 45 of 45 possible baselines.
! AN table 2: 74 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.942663 visibilities/baseline/integration-bin.
! Found source: J2131-2036
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 17460 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J2131-2036_S_a]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 66 telescope corrections were flagged in sub-array 1.
!  A total of 18 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 66 telescope corrections were flagged in sub-array 1.
!  A total of 18 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 66 telescope corrections were flagged in sub-array 1.
!  A total of 18 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.051538Jy  sigma=17.241532
! Fit after  self-cal, rms=0.782601Jy  sigma=13.165606
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.374 mas, bmaj=6.397 mas, bpa=-4.162 degrees
! Estimated noise=0.700591 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.14603 Jy
! Component: 100  -  total flux cleaned = 0.21493 Jy
! Total flux subtracted in 100 components = 0.21493 Jy
! Clean residual min=-0.031725 max=0.102980 Jy/beam
! Clean residual mean=-0.000125 rms=0.010405 Jy/beam
! Combined flux in latest and established models = 0.21493 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 19 components and 0.21493 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.221443Jy  sigma=3.443543
! Fit after  self-cal, rms=0.221030Jy  sigma=3.436930
! Inverting map 
! Added new window around map position (-15, 20.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0853509 Jy
! Component: 100  -  total flux cleaned = 0.132024 Jy
! Total flux subtracted in 100 components = 0.132024 Jy
! Clean residual min=-0.022504 max=0.036363 Jy/beam
! Clean residual mean=-0.000106 rms=0.006458 Jy/beam
! Combined flux in latest and established models = 0.346953 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 33 components and 0.346953 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.165028Jy  sigma=2.550831
! Fit after  self-cal, rms=0.161666Jy  sigma=2.483155
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0433304 Jy
! Component: 100  -  total flux cleaned = 0.0716198 Jy
! Total flux subtracted in 100 components = 0.0716198 Jy
! Clean residual min=-0.017715 max=0.029069 Jy/beam
! Clean residual mean=-0.000085 rms=0.004947 Jy/beam
! Combined flux in latest and established models = 0.418573 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 52 components and 0.418573 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.139164Jy  sigma=2.131578
! Fit after  self-cal, rms=0.138762Jy  sigma=2.123030
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.153 mas, bmaj=8.537 mas, bpa=-11.36 degrees
! Estimated noise=0.335678 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0473888 Jy
! Component: 100  -  total flux cleaned = 0.0796486 Jy
! Component: 150  -  total flux cleaned = 0.103804 Jy
! Component: 200  -  total flux cleaned = 0.122018 Jy
! Total flux subtracted in 200 components = 0.122018 Jy
! Clean residual min=-0.019466 max=0.044370 Jy/beam
! Clean residual mean=-0.000019 rms=0.006532 Jy/beam
! Combined flux in latest and established models = 0.540591 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 73 components and 0.540591 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.115352Jy  sigma=1.747957
! Fit after  self-cal, rms=0.115257Jy  sigma=1.745358
! Inverting map 
! Added new window around map position (-7.5, 9.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0404192 Jy
! Component: 100  -  total flux cleaned = 0.0605348 Jy
! Component: 150  -  total flux cleaned = 0.0751242 Jy
! Component: 200  -  total flux cleaned = 0.086771 Jy
! Total flux subtracted in 200 components = 0.086771 Jy
! Clean residual min=-0.013056 max=0.032316 Jy/beam
! Clean residual mean=-0.000015 rms=0.004067 Jy/beam
! Combined flux in latest and established models = 0.627362 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 102 components and 0.627362 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.098257Jy  sigma=1.483712
! Fit after  self-cal, rms=0.097899Jy  sigma=1.470547
! Inverting map 
! Added new window around map position (6, -6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0248399 Jy
! Component: 100  -  total flux cleaned = 0.0386126 Jy
! Component: 150  -  total flux cleaned = 0.0497977 Jy
! Component: 200  -  total flux cleaned = 0.0583577 Jy
! Total flux subtracted in 200 components = 0.0583577 Jy
! Clean residual min=-0.008966 max=0.010158 Jy/beam
! Clean residual mean=-0.000005 rms=0.002448 Jy/beam
! Combined flux in latest and established models = 0.68572 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 133 components and 0.68572 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.089605Jy  sigma=1.343011
! Fit after  self-cal, rms=0.089131Jy  sigma=1.335530
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.153 x 8.537 at -11.36 degrees (North through East)
! Clean map  min=-0.0086544  max=0.21864 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.96     HN        1.10     KP        0.98     
!   LA        0.92     MK        0.92     NL        0.97     OV        1.01     
!   PT        0.97     SC        0.98     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.98     FD        0.99     HN        1.07     KP        1.02     
!   LA        0.97     MK        0.98     NL        1.02     OV        0.99     
!   PT        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.19     FD        0.97     HN        1.15     KP        0.99     
!   LA        0.95     MK        1.00     NL        0.96     OV        0.95     
!   PT        0.97     SC        1.01     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.15     FD        1.03     HN        1.04     KP        1.02     
!   LA        0.98     MK        1.00     NL        1.03     OV        0.88     
!   PT        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.14     FD        0.97     HN        1.11     KP        1.00     
!   LA        0.96     MK        1.08     NL        0.99     OV        1.05     
!   PT        0.96     SC        1.07     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.05     FD        1.02     HN        1.07     KP        1.04     
!   LA        0.97     MK        1.03     NL        1.02     OV        1.00     
!   PT        0.99     
! 
! 
! Fit before self-cal, rms=0.089131Jy  sigma=1.335530
! Fit after  self-cal, rms=0.089354Jy  sigma=1.282682
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.176 mas, bmaj=8.588 mas, bpa=-11.46 degrees
! Estimated noise=0.339104 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00568864 Jy
! Component: 100  -  total flux cleaned = 0.00662283 Jy
! Component: 150  -  total flux cleaned = 0.00738815 Jy
! Component: 200  -  total flux cleaned = 0.00804673 Jy
! Total flux subtracted in 200 components = 0.00804673 Jy
! Clean residual min=-0.006958 max=0.007104 Jy/beam
! Clean residual mean=0.000029 rms=0.001657 Jy/beam
! Combined flux in latest and established models = 0.693767 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 161 components and 0.693767 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.088246Jy  sigma=1.264213
! Fit after  self-cal, rms=0.088250Jy  sigma=1.262728
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.088250Jy  sigma=1.262728
! Fit after  self-cal, rms=0.090297Jy  sigma=1.236827
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.181 mas, bmaj=8.646 mas, bpa=-11.55 degrees
! Estimated noise=0.340858 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000916524 Jy
! Component: 100  -  total flux cleaned = 0.00173587 Jy
! Component: 150  -  total flux cleaned = 0.00208806 Jy
! Component: 200  -  total flux cleaned = 0.00230747 Jy
! Total flux subtracted in 200 components = 0.00230747 Jy
! Clean residual min=-0.005297 max=0.006091 Jy/beam
! Clean residual mean=0.000015 rms=0.001442 Jy/beam
! Combined flux in latest and established models = 0.696074 Jy
selfcal
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 185 components and 0.696074 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.089924Jy  sigma=1.230497
! Fit after  self-cal, rms=0.089946Jy  sigma=1.230204
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000664382 Jy
! Component: 100  -  total flux cleaned = 0.00095695 Jy
! Component: 150  -  total flux cleaned = 0.000959151 Jy
! Component: 200  -  total flux cleaned = 0.0010479 Jy
! Total flux subtracted in 200 components = 0.0010479 Jy
! Clean residual min=-0.005116 max=0.005919 Jy/beam
! Clean residual mean=0.000016 rms=0.001405 Jy/beam
! Combined flux in latest and established models = 0.697122 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 191 components and 0.697122 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.089732Jy  sigma=1.227389
! Fit after  self-cal, rms=0.089737Jy  sigma=1.227322
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.089737Jy  sigma=1.227322
! Fit after  self-cal, rms=0.092044Jy  sigma=1.225941
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.182 mas, bmaj=8.647 mas, bpa=-11.46 degrees
! Estimated noise=0.340994 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000336072 Jy
! Component: 100  -  total flux cleaned = 0.000512599 Jy
! Component: 150  -  total flux cleaned = 0.000594298 Jy
! Component: 200  -  total flux cleaned = 0.000439507 Jy
! Total flux subtracted in 200 components = 0.000439507 Jy
! Clean residual min=-0.004811 max=0.005955 Jy/beam
! Clean residual mean=0.000011 rms=0.001375 Jy/beam
! Combined flux in latest and established models = 0.697562 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 204 components and 0.697562 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.091885Jy  sigma=1.223550
! Fit after  self-cal, rms=0.091896Jy  sigma=1.223508
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (29, 1.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00593222 Jy
! Component: 100  -  total flux cleaned = 0.00904606 Jy
! Component: 150  -  total flux cleaned = 0.0113356 Jy
! Component: 200  -  total flux cleaned = 0.0130086 Jy
! Total flux subtracted in 200 components = 0.0130086 Jy
! Clean residual min=-0.004557 max=0.004068 Jy/beam
! Clean residual mean=0.000011 rms=0.001109 Jy/beam
! Combined flux in latest and established models = 0.71057 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 226 components and 0.71057 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.091461Jy  sigma=1.215654
! Fit after  self-cal, rms=0.091446Jy  sigma=1.215335
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.091446Jy  sigma=1.215335
! Fit after  self-cal, rms=0.091600Jy  sigma=1.214842
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.552 mas, bmaj=17.93 mas, bpa=-6.819 degrees
! Estimated noise=0.440473 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00285253 Jy
! Component: 100  -  total flux cleaned = 0.00445211 Jy
! Component: 150  -  total flux cleaned = 0.00475911 Jy
! Component: 200  -  total flux cleaned = 0.00497485 Jy
! Total flux subtracted in 200 components = 0.00497485 Jy
! Clean residual min=-0.005723 max=0.005825 Jy/beam
! Clean residual mean=0.000021 rms=0.001700 Jy/beam
! Combined flux in latest and established models = 0.715545 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 254 components and 0.715545 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.091537Jy  sigma=1.214014
! Fit after  self-cal, rms=0.091538Jy  sigma=1.213898
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00090281 Jy
! Component: 100  -  total flux cleaned = 0.00105466 Jy
! Component: 150  -  total flux cleaned = 0.00129378 Jy
! Component: 200  -  total flux cleaned = 0.00151753 Jy
! Total flux subtracted in 200 components = 0.00151753 Jy
! Clean residual min=-0.005555 max=0.005535 Jy/beam
! Clean residual mean=0.000022 rms=0.001666 Jy/beam
! Combined flux in latest and established models = 0.717063 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 267 components and 0.717063 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.091515Jy  sigma=1.213669
! Fit after  self-cal, rms=0.091514Jy  sigma=1.213626
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.179 mas, bmaj=8.637 mas, bpa=-11.43 degrees
! Estimated noise=0.340355 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.179 x 8.637 at -11.43 degrees (North through East)
! Clean map  min=-0.0040178  max=0.21956 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.378 mas, bmaj=6.447 mas, bpa=-4.063 degrees
! Estimated noise=0.719631 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.163178 Jy
! Component: 100  -  total flux cleaned = 0.25786 Jy
! Component: 150  -  total flux cleaned = 0.320082 Jy
! Component: 200  -  total flux cleaned = 0.366208 Jy
! Total flux subtracted in 200 components = 0.366208 Jy
! Clean residual min=-0.018012 max=0.027205 Jy/beam
! Clean residual mean=-0.000105 rms=0.005551 Jy/beam
! Combined flux in latest and established models = 0.366208 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 33 model components to the UV plane model.
! The established model now contains 33 components and 0.366208 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.179 mas, bmaj=8.637 mas, bpa=-11.43 degrees
! Estimated noise=0.340355 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0672481 Jy
! Component: 100  -  total flux cleaned = 0.115789 Jy
! Component: 150  -  total flux cleaned = 0.15341 Jy
! Component: 200  -  total flux cleaned = 0.183132 Jy
! Total flux subtracted in 200 components = 0.183132 Jy
! Clean residual min=-0.011646 max=0.017755 Jy/beam
! Clean residual mean=-0.000005 rms=0.004645 Jy/beam
! Combined flux in latest and established models = 0.549341 Jy
! Adding 90 model components to the UV plane model.
! The established model now contains 111 components and 0.54934 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.552 mas, bmaj=17.93 mas, bpa=-6.819 degrees
! Estimated noise=0.440473 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0408556 Jy
! Component: 100  -  total flux cleaned = 0.0679012 Jy
! Component: 150  -  total flux cleaned = 0.0868896 Jy
! Component: 200  -  total flux cleaned = 0.100662 Jy
! Total flux subtracted in 200 components = 0.100662 Jy
! Clean residual min=-0.008076 max=0.010123 Jy/beam
! Clean residual mean=0.000013 rms=0.003379 Jy/beam
! Combined flux in latest and established models = 0.650003 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0105335 Jy
! Component: 100  -  total flux cleaned = 0.0190799 Jy
! Component: 150  -  total flux cleaned = 0.0261299 Jy
! Component: 200  -  total flux cleaned = 0.0319941 Jy
! Total flux subtracted in 200 components = 0.0319941 Jy
! Clean residual min=-0.006461 max=0.006512 Jy/beam
! Clean residual mean=0.000017 rms=0.002238 Jy/beam
! Combined flux in latest and established models = 0.681997 Jy
! Adding 143 model components to the UV plane model.
! The established model now contains 246 components and 0.681997 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.179 mas, bmaj=8.637 mas, bpa=-11.43 degrees
! Estimated noise=0.340355 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00565834 Jy
! Component: 100  -  total flux cleaned = 0.00974172 Jy
! Component: 150  -  total flux cleaned = 0.0123178 Jy
! Component: 200  -  total flux cleaned = 0.0147009 Jy
! Total flux subtracted in 200 components = 0.0147009 Jy
! Clean residual min=-0.003989 max=0.004301 Jy/beam
! Clean residual mean=0.000010 rms=0.001117 Jy/beam
! Combined flux in latest and established models = 0.696698 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 266 components and 0.696698 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.091369Jy  sigma=1.214822
! Fit after  self-cal, rms=0.091272Jy  sigma=1.213445
wmodel J2131-2036_S_a_map.mod
! Writing 266 model components to file: J2131-2036_S_a_map.mod
wobs   J2131-2036_S_a_uvs.fits
! Writing UV FITS file: J2131-2036_S_a_uvs.fits
wwins  J2131-2036_S_a_map.win
! wwins: Wrote 5 windows to J2131-2036_S_a_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000283743 Jy
! Component: 100  -  total flux cleaned = -0.000114426 Jy
! Component: 150  -  total flux cleaned = -0.000177528 Jy
! Component: 200  -  total flux cleaned = -6.14682e-05 Jy
! Component: 250  -  total flux cleaned = -0.000171962 Jy
! Component: 300  -  total flux cleaned = -0.000437202 Jy
! Component: 350  -  total flux cleaned = -0.000741133 Jy
! Component: 400  -  total flux cleaned = -0.000887275 Jy
! Component: 450  -  total flux cleaned = -0.00117207 Jy
! Component: 500  -  total flux cleaned = -0.00135616 Jy
! Component: 550  -  total flux cleaned = -0.00171174 Jy
! Component: 600  -  total flux cleaned = -0.00201219 Jy
! Component: 650  -  total flux cleaned = -0.00230074 Jy
! Component: 700  -  total flux cleaned = -0.00242049 Jy
! Component: 750  -  total flux cleaned = -0.00253839 Jy
! Component: 800  -  total flux cleaned = -0.00269164 Jy
! Component: 850  -  total flux cleaned = -0.00276634 Jy
! Component: 900  -  total flux cleaned = -0.00298293 Jy
! Component: 950  -  total flux cleaned = -0.00305208 Jy
! Component: 1000  -  total flux cleaned = -0.003121 Jy
! Component: 1050  -  total flux cleaned = -0.00318774 Jy
! Component: 1100  -  total flux cleaned = -0.00338335 Jy
! Component: 1150  -  total flux cleaned = -0.00344677 Jy
! Component: 1200  -  total flux cleaned = -0.00344627 Jy
! Component: 1250  -  total flux cleaned = -0.00360004 Jy
! Component: 1300  -  total flux cleaned = -0.00368941 Jy
! Component: 1350  -  total flux cleaned = -0.00392417 Jy
! Component: 1400  -  total flux cleaned = -0.00409663 Jy
! Component: 1450  -  total flux cleaned = -0.00432381 Jy
! Component: 1500  -  total flux cleaned = -0.00451893 Jy
! Component: 1550  -  total flux cleaned = -0.0047089 Jy
! Component: 1600  -  total flux cleaned = -0.00481647 Jy
! Component: 1650  -  total flux cleaned = -0.00494897 Jy
! Component: 1700  -  total flux cleaned = -0.00515699 Jy
! Component: 1750  -  total flux cleaned = -0.00531021 Jy
! Component: 1800  -  total flux cleaned = -0.00548563 Jy
! Component: 1850  -  total flux cleaned = -0.00560896 Jy
! Component: 1900  -  total flux cleaned = -0.00577916 Jy
! Component: 1950  -  total flux cleaned = -0.00594668 Jy
! Component: 2000  -  total flux cleaned = -0.00608812 Jy
! Component: 2050  -  total flux cleaned = -0.0062037 Jy
! Component: 2100  -  total flux cleaned = -0.00618159 Jy
! Component: 2150  -  total flux cleaned = -0.00633918 Jy
! Component: 2200  -  total flux cleaned = -0.00638288 Jy
! Component: 2250  -  total flux cleaned = -0.00638284 Jy
! Component: 2300  -  total flux cleaned = -0.00634038 Jy
! Component: 2350  -  total flux cleaned = -0.00636207 Jy
! Component: 2400  -  total flux cleaned = -0.00636232 Jy
! Component: 2450  -  total flux cleaned = -0.00634222 Jy
! Component: 2500  -  total flux cleaned = -0.00638308 Jy
! Component: 2550  -  total flux cleaned = -0.00642326 Jy
! Component: 2600  -  total flux cleaned = -0.00640356 Jy
! Component: 2650  -  total flux cleaned = -0.00642294 Jy
! Component: 2700  -  total flux cleaned = -0.00640356 Jy
! Component: 2750  -  total flux cleaned = -0.00642256 Jy
! Component: 2800  -  total flux cleaned = -0.00636617 Jy
! Component: 2850  -  total flux cleaned = -0.00638505 Jy
! Component: 2900  -  total flux cleaned = -0.00638479 Jy
! Component: 2950  -  total flux cleaned = -0.00629386 Jy
! Component: 3000  -  total flux cleaned = -0.00620379 Jy
! Component: 3050  -  total flux cleaned = -0.00618567 Jy
! Component: 3100  -  total flux cleaned = -0.00611491 Jy
! Component: 3150  -  total flux cleaned = -0.00602729 Jy
! Component: 3200  -  total flux cleaned = -0.00592323 Jy
! Component: 3250  -  total flux cleaned = -0.00587169 Jy
! Component: 3300  -  total flux cleaned = -0.0057866 Jy
! Component: 3350  -  total flux cleaned = -0.00571924 Jy
! Component: 3400  -  total flux cleaned = -0.00566899 Jy
! Component: 3450  -  total flux cleaned = -0.005586 Jy
! Component: 3500  -  total flux cleaned = -0.00553649 Jy
! Component: 3550  -  total flux cleaned = -0.00543865 Jy
! Component: 3600  -  total flux cleaned = -0.00539014 Jy
! Component: 3650  -  total flux cleaned = -0.00529388 Jy
! Component: 3700  -  total flux cleaned = -0.00523014 Jy
! Component: 3750  -  total flux cleaned = -0.00515117 Jy
! Component: 3800  -  total flux cleaned = -0.00508848 Jy
! Component: 3850  -  total flux cleaned = -0.00501073 Jy
! Component: 3900  -  total flux cleaned = -0.00499534 Jy
! Component: 3950  -  total flux cleaned = -0.00494931 Jy
! Component: 4000  -  total flux cleaned = -0.00491879 Jy
! Component: 4050  -  total flux cleaned = -0.00482798 Jy
! Total flux subtracted in 4096 components = -0.00475296 Jy
! Clean residual min=-0.000826 max=0.000852 Jy/beam
! Clean residual mean=0.000010 rms=0.000289 Jy/beam
! Combined flux in latest and established models = 0.691945 Jy
keep
! Adding 331 model components to the UV plane model.
! The established model now contains 597 components and 0.691945 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uvm//J2131-2036_S_a_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.179 x 8.637 at -11.43 degrees (North through East)
! Clean map  min=-0.0020874  max=0.22762 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uvm//J2131-2036_S_a_map.fits
wmodel /vlbi/uf001/uvm//J2131-2036_S_a_map.mod
! Writing 597 model components to file: /vlbi/uf001/uvm//J2131-2036_S_a_map.mod
wobs   /vlbi/uf001/uvm//J2131-2036_S_a_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uvm//J2131-2036_S_a_uvs.fits
wwins  /vlbi/uf001/uvm//J2131-2036_S_a_map.win
! wwins: Wrote 6 windows to /vlbi/uf001/uvm//J2131-2036_S_a_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.227617 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000282181 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.371915 0.371915 0.743831 1.48766 2.97532 5.95065 11.9013 23.8026 47.6052 95.2103
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.227 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  806.635 
quit
! Quitting program
! Log file /vlbi/uf001/uvm//J2131-2036_S_a_dfm.log closed on Sun Jan 13 22:34:45 2019