! Started logfile: /vlbi/uf001/uva//J2130+0843_X_dfm.log on Mon Jan 14 05:53:19 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /vlbi/uf001/uva//J2130+0843_X_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J2130+0843_X_uva.fits
! AN table 1: 42 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.921164 visibilities/baseline/integration-bin.
! Found source: J2130+0843
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 20892 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J2130+0843_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 72 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 72 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 72 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 72 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 72 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 72 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 72 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 72 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 72 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 72 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 72 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 72 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.001994Jy  sigma=23.606451
! Fit after  self-cal, rms=0.924433Jy  sigma=21.791286
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6872 mas, bmaj=1.74 mas, bpa=-5.066 degrees
! Estimated noise=0.341192 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.059211 Jy
! Component: 100  -  total flux cleaned = 0.0722272 Jy
! Total flux subtracted in 100 components = 0.0722272 Jy
! Clean residual min=-0.002163 max=0.004203 Jy/beam
! Clean residual mean=0.000001 rms=0.000569 Jy/beam
! Combined flux in latest and established models = 0.0722272 Jy
! Performing phase self-cal
! Adding 3 model components to the UV plane model.
! The established model now contains 3 components and 0.0722272 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056139Jy  sigma=1.240517
! Fit after  self-cal, rms=0.055860Jy  sigma=1.233605
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00442616 Jy
! Component: 100  -  total flux cleaned = 0.00626166 Jy
! Total flux subtracted in 100 components = 0.00626166 Jy
! Clean residual min=-0.002160 max=0.003536 Jy/beam
! Clean residual mean=0.000000 rms=0.000519 Jy/beam
! Combined flux in latest and established models = 0.0784889 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 10 components and 0.0784889 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055464Jy  sigma=1.223772
! Fit after  self-cal, rms=0.055465Jy  sigma=1.223712
! Inverting map 
! Added new window around map position (1.8, 1).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0032435 Jy
! Component: 100  -  total flux cleaned = 0.00409213 Jy
! Total flux subtracted in 100 components = 0.00409213 Jy
! Clean residual min=-0.002029 max=0.002295 Jy/beam
! Clean residual mean=-0.000000 rms=0.000479 Jy/beam
! Combined flux in latest and established models = 0.082581 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 18 components and 0.082581 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055339Jy  sigma=1.219781
! Fit after  self-cal, rms=0.055317Jy  sigma=1.219229
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8577 mas, bmaj=1.969 mas, bpa=-4.778 degrees
! Estimated noise=0.227707 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00132694 Jy
! Component: 100  -  total flux cleaned = 0.00218531 Jy
! Component: 150  -  total flux cleaned = 0.00271241 Jy
! Component: 200  -  total flux cleaned = 0.00279079 Jy
! Total flux subtracted in 200 components = 0.00279079 Jy
! Clean residual min=-0.001706 max=0.001710 Jy/beam
! Clean residual mean=0.000000 rms=0.000370 Jy/beam
! Combined flux in latest and established models = 0.0853718 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 30 components and 0.0853718 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055286Jy  sigma=1.218183
! Fit after  self-cal, rms=0.055287Jy  sigma=1.218127
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8577 x 1.969 at -4.778 degrees (North through East)
! Clean map  min=-0.0015853  max=0.076065 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.04     HN        0.99     KP        1.01     
!   LA        0.95     MK        1.01     NL        1.08     OV        0.94     
!   PT        0.92     SC        0.94     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.11     FD        1.00     HN        0.92     KP        1.04     
!   LA        0.97     MK        1.06     NL        1.07     OV        0.91     
!   PT        0.97     SC        0.89     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.02     HN        0.96     KP        1.02     
!   LA        1.03     MK        0.97     NL        1.06     OV        0.91     
!   PT        0.94     SC        0.97     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.04     HN        0.98     KP        0.99     
!   LA        0.99     MK        1.08     NL        1.06     OV        0.93     
!   PT        0.99     SC        0.94     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        0.98     HN        0.96     KP        1.05     
!   LA        1.03     MK        0.99     NL        1.04     OV        0.95     
!   PT        0.99     SC        1.01     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.98     HN        0.94     KP        1.02     
!   LA        1.00     MK        1.04     NL        1.12     OV        0.92     
!   PT        0.98     SC        0.97     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        1.03     HN        0.95     KP        1.10     
!   LA        0.97     MK        1.01     NL        1.11     OV        0.88     
!   PT        0.94     SC        0.95     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        1.05     HN        0.91     KP        1.08     
!   LA        1.04     MK        0.93     NL        1.06     OV        0.91     
!   PT        0.94     SC        0.98     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.94     HN        1.09     KP        1.06     
!   LA        0.99     MK        0.99     NL        1.11     OV        0.88     
!   PT        0.96     SC        0.96     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        0.94     HN        0.97     KP        1.03     
!   LA        0.99     MK        1.03     NL        1.05     OV        0.97     
!   PT        0.99     SC        0.91     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.98     HN        0.98     KP        1.06     
!   LA        1.00     MK        1.07     NL        1.10     OV        0.90     
!   PT        0.94     SC        1.00     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.92     HN        0.92     KP        1.02     
!   LA        1.00     MK        0.99     NL        1.12     OV        0.92     
!   PT        0.95     SC        1.02     
! 
! 
! Fit before self-cal, rms=0.055287Jy  sigma=1.218127
! Fit after  self-cal, rms=0.054640Jy  sigma=1.209791
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8548 mas, bmaj=1.974 mas, bpa=-4.389 degrees
! Estimated noise=0.227532 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000767366 Jy
! Component: 100  -  total flux cleaned = -0.000812552 Jy
! Component: 150  -  total flux cleaned = -0.00084731 Jy
! Component: 200  -  total flux cleaned = -0.000861482 Jy
! Total flux subtracted in 200 components = -0.000861482 Jy
! Clean residual min=-0.001193 max=0.001160 Jy/beam
! Clean residual mean=-0.000001 rms=0.000270 Jy/beam
! Combined flux in latest and established models = 0.0845103 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 38 components and 0.0845103 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054619Jy  sigma=1.209325
! Fit after  self-cal, rms=0.054643Jy  sigma=1.209019
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054643Jy  sigma=1.209019
! Fit after  self-cal, rms=0.054839Jy  sigma=1.204415
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8548 mas, bmaj=1.973 mas, bpa=-4.347 degrees
! Estimated noise=0.227838 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000268446 Jy
! Component: 100  -  total flux cleaned = -0.000311017 Jy
! Component: 150  -  total flux cleaned = -0.000355774 Jy
! Component: 200  -  total flux cleaned = -0.00037523 Jy
! Total flux subtracted in 200 components = -0.00037523 Jy
! Clean residual min=-0.001057 max=0.001016 Jy/beam
! Clean residual mean=-0.000001 rms=0.000254 Jy/beam
! Combined flux in latest and established models = 0.0841351 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 46 components and 0.0841351 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054832Jy  sigma=1.204275
! Fit after  self-cal, rms=0.054846Jy  sigma=1.204170
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.91856e-05 Jy
! Component: 100  -  total flux cleaned = -7.52789e-05 Jy
! Component: 150  -  total flux cleaned = -9.74722e-05 Jy
! Component: 200  -  total flux cleaned = -0.000111056 Jy
! Total flux subtracted in 200 components = -0.000111056 Jy
! Clean residual min=-0.001044 max=0.001017 Jy/beam
! Clean residual mean=-0.000001 rms=0.000253 Jy/beam
! Combined flux in latest and established models = 0.084024 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 49 components and 0.084024 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054844Jy  sigma=1.204123
! Fit after  self-cal, rms=0.054843Jy  sigma=1.204121
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054843Jy  sigma=1.204121
! Fit after  self-cal, rms=0.054889Jy  sigma=1.203865
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8537 mas, bmaj=1.973 mas, bpa=-4.309 degrees
! Estimated noise=0.227648 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000158364 Jy
! Component: 100  -  total flux cleaned = -0.00017614 Jy
! Component: 150  -  total flux cleaned = -0.00019064 Jy
! Component: 200  -  total flux cleaned = -0.000204226 Jy
! Total flux subtracted in 200 components = -0.000204226 Jy
! Clean residual min=-0.001031 max=0.001027 Jy/beam
! Clean residual mean=-0.000001 rms=0.000250 Jy/beam
! Combined flux in latest and established models = 0.0838198 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 53 components and 0.0838198 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054886Jy  sigma=1.203810
! Fit after  self-cal, rms=0.054889Jy  sigma=1.203795
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.58731e-05 Jy
! Component: 100  -  total flux cleaned = -4.21151e-05 Jy
! Component: 150  -  total flux cleaned = -5.36614e-05 Jy
! Component: 200  -  total flux cleaned = -6.41382e-05 Jy
! Total flux subtracted in 200 components = -6.41382e-05 Jy
! Clean residual min=-0.001029 max=0.001027 Jy/beam
! Clean residual mean=-0.000001 rms=0.000250 Jy/beam
! Combined flux in latest and established models = 0.0837556 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 56 components and 0.0837556 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054888Jy  sigma=1.203772
! Fit after  self-cal, rms=0.054888Jy  sigma=1.203771
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054888Jy  sigma=1.203771
! Fit after  self-cal, rms=0.054863Jy  sigma=1.203753
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.13 mas, bmaj=3.019 mas, bpa=2.165 degrees
! Estimated noise=0.291836 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.6748e-05 Jy
! Component: 100  -  total flux cleaned = -0.000144297 Jy
! Component: 150  -  total flux cleaned = -0.000164425 Jy
! Component: 200  -  total flux cleaned = -0.000177695 Jy
! Total flux subtracted in 200 components = -0.000177695 Jy
! Clean residual min=-0.001145 max=0.001137 Jy/beam
! Clean residual mean=-0.000001 rms=0.000306 Jy/beam
! Combined flux in latest and established models = 0.0835779 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 63 components and 0.0835779 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054862Jy  sigma=1.203728
! Fit after  self-cal, rms=0.054862Jy  sigma=1.203722
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.52502e-05 Jy
! Component: 100  -  total flux cleaned = -6.7505e-05 Jy
! Component: 150  -  total flux cleaned = -7.53618e-05 Jy
! Component: 200  -  total flux cleaned = -8.26748e-05 Jy
! Total flux subtracted in 200 components = -8.26748e-05 Jy
! Clean residual min=-0.001130 max=0.001136 Jy/beam
! Clean residual mean=-0.000001 rms=0.000306 Jy/beam
! Combined flux in latest and established models = 0.0834953 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 64 components and 0.0834952 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054862Jy  sigma=1.203716
! Fit after  self-cal, rms=0.054862Jy  sigma=1.203713
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8528 mas, bmaj=1.973 mas, bpa=-4.286 degrees
! Estimated noise=0.227504 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8528 x 1.973 at -4.286 degrees (North through East)
! Clean map  min=-0.00094915  max=0.075966 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6822 mas, bmaj=1.744 mas, bpa=-4.633 degrees
! Estimated noise=0.340368 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0591809 Jy
! Component: 100  -  total flux cleaned = 0.0722135 Jy
! Component: 150  -  total flux cleaned = 0.0765328 Jy
! Component: 200  -  total flux cleaned = 0.0790232 Jy
! Total flux subtracted in 200 components = 0.0790232 Jy
! Clean residual min=-0.001748 max=0.001574 Jy/beam
! Clean residual mean=-0.000000 rms=0.000408 Jy/beam
! Combined flux in latest and established models = 0.0790232 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.0790232 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8528 mas, bmaj=1.973 mas, bpa=-4.286 degrees
! Estimated noise=0.227504 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00191132 Jy
! Component: 100  -  total flux cleaned = 0.00291482 Jy
! Component: 150  -  total flux cleaned = 0.0035767 Jy
! Component: 200  -  total flux cleaned = 0.0038938 Jy
! Total flux subtracted in 200 components = 0.0038938 Jy
! Clean residual min=-0.001085 max=0.001020 Jy/beam
! Clean residual mean=-0.000000 rms=0.000253 Jy/beam
! Combined flux in latest and established models = 0.082917 Jy
! Adding 19 model components to the UV plane model.
! The established model now contains 25 components and 0.082917 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.13 mas, bmaj=3.019 mas, bpa=2.165 degrees
! Estimated noise=0.291836 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000419241 Jy
! Component: 100  -  total flux cleaned = 0.00046782 Jy
! Component: 150  -  total flux cleaned = 0.00048377 Jy
! Component: 200  -  total flux cleaned = 0.000490387 Jy
! Total flux subtracted in 200 components = 0.000490387 Jy
! Clean residual min=-0.001152 max=0.001131 Jy/beam
! Clean residual mean=-0.000001 rms=0.000307 Jy/beam
! Combined flux in latest and established models = 0.0834074 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.15939e-05 Jy
! Component: 100  -  total flux cleaned = 2.17124e-05 Jy
! Component: 150  -  total flux cleaned = 1.22933e-05 Jy
! Component: 200  -  total flux cleaned = 1.23734e-05 Jy
! Total flux subtracted in 200 components = 1.23734e-05 Jy
! Clean residual min=-0.001146 max=0.001131 Jy/beam
! Clean residual mean=-0.000001 rms=0.000306 Jy/beam
! Combined flux in latest and established models = 0.0834198 Jy
! Adding 24 model components to the UV plane model.
! The established model now contains 46 components and 0.0834198 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8528 mas, bmaj=1.973 mas, bpa=-4.286 degrees
! Estimated noise=0.227504 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000110792 Jy
! Component: 100  -  total flux cleaned = -0.000110999 Jy
! Component: 150  -  total flux cleaned = -0.000110746 Jy
! Component: 200  -  total flux cleaned = -0.000110411 Jy
! Total flux subtracted in 200 components = -0.000110411 Jy
! Clean residual min=-0.001058 max=0.001018 Jy/beam
! Clean residual mean=-0.000001 rms=0.000250 Jy/beam
! Combined flux in latest and established models = 0.0833094 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 52 components and 0.0833094 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054867Jy  sigma=1.203900
! Fit after  self-cal, rms=0.054865Jy  sigma=1.203870
wmodel J2130+0843_X_map.mod
! Writing 52 model components to file: J2130+0843_X_map.mod
wobs   J2130+0843_X_uvs.fits
! Writing UV FITS file: J2130+0843_X_uvs.fits
wwins  J2130+0843_X_map.win
! wwins: Wrote 2 windows to J2130+0843_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -8.37072e-05 Jy
! Component: 100  -  total flux cleaned = -0.000120857 Jy
! Component: 150  -  total flux cleaned = -0.000103362 Jy
! Component: 200  -  total flux cleaned = -6.89578e-05 Jy
! Component: 250  -  total flux cleaned = -3.55344e-05 Jy
! Component: 300  -  total flux cleaned = -3.55982e-05 Jy
! Component: 350  -  total flux cleaned = -5.20296e-05 Jy
! Component: 400  -  total flux cleaned = -5.23019e-05 Jy
! Component: 450  -  total flux cleaned = -9.90962e-05 Jy
! Component: 500  -  total flux cleaned = -0.00012975 Jy
! Component: 550  -  total flux cleaned = -0.000175283 Jy
! Component: 600  -  total flux cleaned = -0.000220055 Jy
! Component: 650  -  total flux cleaned = -0.000264294 Jy
! Component: 700  -  total flux cleaned = -0.000307829 Jy
! Component: 750  -  total flux cleaned = -0.000307727 Jy
! Component: 800  -  total flux cleaned = -0.000307706 Jy
! Component: 850  -  total flux cleaned = -0.000307617 Jy
! Component: 900  -  total flux cleaned = -0.000280035 Jy
! Component: 950  -  total flux cleaned = -0.000307315 Jy
! Component: 1000  -  total flux cleaned = -0.000334089 Jy
! Component: 1050  -  total flux cleaned = -0.000267346 Jy
! Component: 1100  -  total flux cleaned = -0.000280595 Jy
! Component: 1150  -  total flux cleaned = -0.00029363 Jy
! Component: 1200  -  total flux cleaned = -0.000280483 Jy
! Component: 1250  -  total flux cleaned = -0.000228957 Jy
! Component: 1300  -  total flux cleaned = -0.000190889 Jy
! Component: 1350  -  total flux cleaned = -0.000216293 Jy
! Component: 1400  -  total flux cleaned = -0.000203804 Jy
! Component: 1450  -  total flux cleaned = -0.000166469 Jy
! Component: 1500  -  total flux cleaned = -0.000166476 Jy
! Component: 1550  -  total flux cleaned = -0.000117564 Jy
! Component: 1600  -  total flux cleaned = -0.00010554 Jy
! Component: 1650  -  total flux cleaned = -0.000105437 Jy
! Component: 1700  -  total flux cleaned = -3.39636e-05 Jy
! Component: 1750  -  total flux cleaned = -0.000105046 Jy
! Component: 1800  -  total flux cleaned = -8.13713e-05 Jy
! Component: 1850  -  total flux cleaned = -3.4649e-05 Jy
! Component: 1900  -  total flux cleaned = -2.30818e-05 Jy
! Component: 1950  -  total flux cleaned = -1.16976e-05 Jy
! Component: 2000  -  total flux cleaned = -1.73081e-07 Jy
! Component: 2050  -  total flux cleaned = -2.71824e-07 Jy
! Component: 2100  -  total flux cleaned = -1.15567e-05 Jy
! Component: 2150  -  total flux cleaned = 1.09637e-05 Jy
! Component: 2200  -  total flux cleaned = -3.35857e-05 Jy
! Component: 2250  -  total flux cleaned = 2.17651e-05 Jy
! Component: 2300  -  total flux cleaned = -5.50925e-05 Jy
! Component: 2350  -  total flux cleaned = -7.70308e-05 Jy
! Component: 2400  -  total flux cleaned = -3.35691e-05 Jy
! Component: 2450  -  total flux cleaned = -3.36666e-05 Jy
! Component: 2500  -  total flux cleaned = -8.73351e-05 Jy
! Component: 2550  -  total flux cleaned = -7.66564e-05 Jy
! Component: 2600  -  total flux cleaned = -7.67162e-05 Jy
! Component: 2650  -  total flux cleaned = -9.77966e-05 Jy
! Component: 2700  -  total flux cleaned = -0.000150117 Jy
! Component: 2750  -  total flux cleaned = -0.000150038 Jy
! Component: 2800  -  total flux cleaned = -0.000160455 Jy
! Component: 2850  -  total flux cleaned = -0.000160375 Jy
! Component: 2900  -  total flux cleaned = -0.000139929 Jy
! Component: 2950  -  total flux cleaned = -0.000221385 Jy
! Component: 3000  -  total flux cleaned = -0.000211213 Jy
! Component: 3050  -  total flux cleaned = -0.000211191 Jy
! Component: 3100  -  total flux cleaned = -0.000201175 Jy
! Component: 3150  -  total flux cleaned = -0.000270958 Jy
! Component: 3200  -  total flux cleaned = -0.000290747 Jy
! Component: 3250  -  total flux cleaned = -0.000320225 Jy
! Component: 3300  -  total flux cleaned = -0.000310401 Jy
! Component: 3350  -  total flux cleaned = -0.000320151 Jy
! Component: 3400  -  total flux cleaned = -0.000329852 Jy
! Component: 3450  -  total flux cleaned = -0.000291404 Jy
! Component: 3500  -  total flux cleaned = -0.00032977 Jy
! Component: 3550  -  total flux cleaned = -0.000358444 Jy
! Component: 3600  -  total flux cleaned = -0.000339543 Jy
! Component: 3650  -  total flux cleaned = -0.000339585 Jy
! Component: 3700  -  total flux cleaned = -0.00036778 Jy
! Component: 3750  -  total flux cleaned = -0.00033041 Jy
! Component: 3800  -  total flux cleaned = -0.000358347 Jy
! Component: 3850  -  total flux cleaned = -0.000376789 Jy
! Component: 3900  -  total flux cleaned = -0.00034002 Jy
! Component: 3950  -  total flux cleaned = -0.000367449 Jy
! Component: 4000  -  total flux cleaned = -0.000349252 Jy
! Component: 4050  -  total flux cleaned = -0.000322149 Jy
! Total flux subtracted in 4096 components = -0.000313154 Jy
! Clean residual min=-0.000540 max=0.000497 Jy/beam
! Clean residual mean=-0.000000 rms=0.000155 Jy/beam
! Combined flux in latest and established models = 0.0829962 Jy
keep
! Adding 282 model components to the UV plane model.
! The established model now contains 334 components and 0.0829962 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J2130+0843_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8528 x 1.973 at -4.286 degrees (North through East)
! Clean map  min=-0.00087432  max=0.076067 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J2130+0843_X_map.fits
wmodel /vlbi/uf001/uva//J2130+0843_X_map.mod
! Writing 334 model components to file: /vlbi/uf001/uva//J2130+0843_X_map.mod
wobs   /vlbi/uf001/uva//J2130+0843_X_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J2130+0843_X_uvs.fits
wwins  /vlbi/uf001/uva//J2130+0843_X_map.win
! wwins: Wrote 3 windows to /vlbi/uf001/uva//J2130+0843_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0760669 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000153924 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.607059 0.607059 1.21412 2.42824 4.85647 9.71294 19.4259 38.8518 77.7036
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0004 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.076 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  494.185 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J2130+0843_X_dfm.log closed on Mon Jan 14 05:53:23 2019