! Started logfile: /vlbi/uf001/uva//J2125+6423_X_dfm.log on Mon Jan 14 05:52:20 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uva//J2125+6423_X_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J2125+6423_X_uva.fits ! AN table 1: 56 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.925397 visibilities/baseline/integration-bin. ! Found source: J2125+6423 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 27984 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J2125+6423_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 94 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 94 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 94 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 94 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 94 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 94 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 94 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 94 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 94 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 94 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 94 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 94 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.015787Jy sigma=23.351553 ! Fit after self-cal, rms=0.874006Jy sigma=20.023120 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8052 mas, bmaj=1.027 mas, bpa=12.9 degrees ! Estimated noise=0.376069 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0901609 Jy ! Component: 100 - total flux cleaned = 0.130966 Jy ! Total flux subtracted in 100 components = 0.130966 Jy ! Clean residual min=-0.009446 max=0.039388 Jy/beam ! Clean residual mean=0.000016 rms=0.002470 Jy/beam ! Combined flux in latest and established models = 0.130966 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.130966 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.110251Jy sigma=2.410204 ! Fit after self-cal, rms=0.109444Jy sigma=2.393846 ! Inverting map ! Added new window around map position (0.4, -1.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0362855 Jy ! Component: 100 - total flux cleaned = 0.0562138 Jy ! Total flux subtracted in 100 components = 0.0562138 Jy ! Clean residual min=-0.006236 max=0.018000 Jy/beam ! Clean residual mean=0.000021 rms=0.001697 Jy/beam ! Combined flux in latest and established models = 0.187179 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 21 components and 0.187179 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.089343Jy sigma=1.921585 ! Fit after self-cal, rms=0.088041Jy sigma=1.891393 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0170874 Jy ! Component: 100 - total flux cleaned = 0.0276707 Jy ! Total flux subtracted in 100 components = 0.0276707 Jy ! Clean residual min=-0.005134 max=0.011627 Jy/beam ! Clean residual mean=0.000023 rms=0.001371 Jy/beam ! Combined flux in latest and established models = 0.21485 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 29 components and 0.21485 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081384Jy sigma=1.737996 ! Fit after self-cal, rms=0.081113Jy sigma=1.731839 ! Inverting map ! Added new window around map position (0.2, -13.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0123428 Jy ! Component: 100 - total flux cleaned = 0.021369 Jy ! Total flux subtracted in 100 components = 0.021369 Jy ! Clean residual min=-0.004658 max=0.007843 Jy/beam ! Clean residual mean=0.000021 rms=0.001182 Jy/beam ! Combined flux in latest and established models = 0.236219 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 45 components and 0.236219 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076709Jy sigma=1.626754 ! Fit after self-cal, rms=0.076503Jy sigma=1.622138 ! Inverting map ! Added new window around map position (0.8, -3.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00897392 Jy ! Component: 100 - total flux cleaned = 0.016336 Jy ! Total flux subtracted in 100 components = 0.016336 Jy ! Clean residual min=-0.004194 max=0.006403 Jy/beam ! Clean residual mean=0.000021 rms=0.001069 Jy/beam ! Combined flux in latest and established models = 0.252555 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 62 components and 0.252555 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073707Jy sigma=1.557414 ! Fit after self-cal, rms=0.073604Jy sigma=1.555342 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.056 mas, bmaj=1.288 mas, bpa=19.87 degrees ! Estimated noise=0.202688 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0156906 Jy ! Component: 100 - total flux cleaned = 0.0275286 Jy ! Component: 150 - total flux cleaned = 0.0368894 Jy ! Component: 200 - total flux cleaned = 0.0444012 Jy ! Total flux subtracted in 200 components = 0.0444012 Jy ! Clean residual min=-0.005609 max=0.011992 Jy/beam ! Clean residual mean=0.000074 rms=0.001700 Jy/beam ! Combined flux in latest and established models = 0.296956 Jy ! Performing phase self-cal ! Adding 65 model components to the UV plane model. ! The established model now contains 101 components and 0.296956 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068443Jy sigma=1.438476 ! Fit after self-cal, rms=0.068029Jy sigma=1.428542 ! Inverting map ! Added new window around map position (1.6, -19). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0129481 Jy ! Component: 100 - total flux cleaned = 0.0217989 Jy ! Component: 150 - total flux cleaned = 0.029215 Jy ! Component: 200 - total flux cleaned = 0.0356661 Jy ! Total flux subtracted in 200 components = 0.0356661 Jy ! Clean residual min=-0.004562 max=0.006632 Jy/beam ! Clean residual mean=0.000051 rms=0.001253 Jy/beam ! Combined flux in latest and established models = 0.332622 Jy ! Performing phase self-cal ! Adding 79 model components to the UV plane model. ! The established model now contains 163 components and 0.332622 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064485Jy sigma=1.345632 ! Fit after self-cal, rms=0.064269Jy sigma=1.340205 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.056 x 1.288 at 19.87 degrees (North through East) ! Clean map min=-0.0046239 max=0.11669 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 0.98 HN 0.90 KP 0.97 ! LA 1.00 MK 1.09 NL 0.98 OV 0.92 ! PT 0.87 SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 0.97 HN 0.90 KP 0.96 ! LA 1.01 MK 1.15 NL 0.99 OV 0.94 ! PT 0.87 SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 0.99 HN 0.91 KP 0.99 ! LA 1.00 MK 1.10 NL 0.99 OV 0.94 ! PT 0.87 SC 0.98 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 1.01 HN 0.95 KP 1.00 ! LA 0.99 MK 1.10 NL 0.99 OV 0.94 ! PT 0.88 SC 0.97 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 0.99 HN 0.97 KP 0.98 ! LA 1.03 MK 1.07 NL 0.98 OV 0.93 ! PT 0.88 SC 1.02 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 0.99 HN 0.92 KP 0.98 ! LA 1.01 MK 1.10 NL 1.00 OV 0.96 ! PT 0.89 SC 0.98 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.01 HN 0.92 KP 0.98 ! LA 1.02 MK 1.09 NL 1.01 OV 0.94 ! PT 0.87 SC 0.98 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 1.02 HN 0.93 KP 0.99 ! LA 1.03 MK 1.10 NL 1.01 OV 0.94 ! PT 0.88 SC 0.96 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 1.01 HN 0.89 KP 1.00 ! LA 1.01 MK 1.08 NL 1.03 OV 0.96 ! PT 0.88 SC 0.98 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 1.01 HN 0.96 KP 0.98 ! LA 1.01 MK 1.13 NL 1.02 OV 0.95 ! PT 0.88 SC 0.99 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 1.01 HN 0.92 KP 1.00 ! LA 1.01 MK 1.05 NL 1.01 OV 0.97 ! PT 0.89 SC 1.01 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 1.00 HN 0.93 KP 1.02 ! LA 1.01 MK 0.98 NL 1.01 OV 0.95 ! PT 0.91 SC 1.01 ! ! ! Fit before self-cal, rms=0.064269Jy sigma=1.340205 ! Fit after self-cal, rms=0.059855Jy sigma=1.284898 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.073 mas, bmaj=1.3 mas, bpa=19.9 degrees ! Estimated noise=0.19951 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.4, -12). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00615502 Jy ! Component: 100 - total flux cleaned = 0.0106684 Jy ! Component: 150 - total flux cleaned = 0.0143912 Jy ! Component: 200 - total flux cleaned = 0.0170488 Jy ! Total flux subtracted in 200 components = 0.0170488 Jy ! Clean residual min=-0.002968 max=0.003394 Jy/beam ! Clean residual mean=0.000030 rms=0.000695 Jy/beam ! Combined flux in latest and established models = 0.349671 Jy ! Performing phase self-cal ! Adding 58 model components to the UV plane model. ! The established model now contains 212 components and 0.349671 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059000Jy sigma=1.260337 ! Fit after self-cal, rms=0.058964Jy sigma=1.258943 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058964Jy sigma=1.258943 ! Fit after self-cal, rms=0.060191Jy sigma=1.243936 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.078 mas, bmaj=1.288 mas, bpa=18.93 degrees ! Estimated noise=0.20107 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00303827 Jy ! Component: 100 - total flux cleaned = 0.00503002 Jy ! Component: 150 - total flux cleaned = 0.00664074 Jy ! Component: 200 - total flux cleaned = 0.00810992 Jy ! Total flux subtracted in 200 components = 0.00810992 Jy ! Clean residual min=-0.002072 max=0.002877 Jy/beam ! Clean residual mean=0.000015 rms=0.000527 Jy/beam ! Combined flux in latest and established models = 0.357781 Jy selfcal ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 232 components and 0.357781 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059962Jy sigma=1.237512 ! Fit after self-cal, rms=0.059957Jy sigma=1.237065 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.2, -18). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00316813 Jy ! Component: 100 - total flux cleaned = 0.00523658 Jy ! Component: 150 - total flux cleaned = 0.00664163 Jy ! Component: 200 - total flux cleaned = 0.00787882 Jy ! Total flux subtracted in 200 components = 0.00787882 Jy ! Clean residual min=-0.001912 max=0.002211 Jy/beam ! Clean residual mean=0.000007 rms=0.000454 Jy/beam ! Combined flux in latest and established models = 0.36566 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 263 components and 0.36566 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059742Jy sigma=1.231431 ! Fit after self-cal, rms=0.059722Jy sigma=1.231053 ! Inverting map ! Added new window around map position (14.6, -20.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00213271 Jy ! Component: 100 - total flux cleaned = 0.00346908 Jy ! Component: 150 - total flux cleaned = 0.00466488 Jy ! Component: 200 - total flux cleaned = 0.0056548 Jy ! Total flux subtracted in 200 components = 0.0056548 Jy ! Clean residual min=-0.001762 max=0.001778 Jy/beam ! Clean residual mean=0.000006 rms=0.000418 Jy/beam ! Combined flux in latest and established models = 0.371315 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 286 components and 0.371315 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059608Jy sigma=1.228035 ! Fit after self-cal, rms=0.059600Jy sigma=1.227933 ! Inverting map ! Added new window around map position (8.2, -47.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00157229 Jy ! Component: 100 - total flux cleaned = 0.00254822 Jy ! Component: 150 - total flux cleaned = 0.00343602 Jy ! Component: 200 - total flux cleaned = 0.00429005 Jy ! Total flux subtracted in 200 components = 0.00429005 Jy ! Clean residual min=-0.001640 max=0.001562 Jy/beam ! Clean residual mean=0.000005 rms=0.000392 Jy/beam ! Combined flux in latest and established models = 0.375605 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 303 components and 0.375605 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059535Jy sigma=1.226056 ! Fit after self-cal, rms=0.059529Jy sigma=1.225986 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059529Jy sigma=1.225986 ! Fit after self-cal, rms=0.059835Jy sigma=1.224675 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.078 mas, bmaj=1.285 mas, bpa=19.82 degrees ! Estimated noise=0.200149 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00106773 Jy ! Component: 100 - total flux cleaned = 0.00190703 Jy ! Component: 150 - total flux cleaned = 0.00265352 Jy ! Component: 200 - total flux cleaned = 0.00326626 Jy ! Total flux subtracted in 200 components = 0.00326626 Jy ! Clean residual min=-0.001456 max=0.001474 Jy/beam ! Clean residual mean=0.000007 rms=0.000361 Jy/beam ! Combined flux in latest and established models = 0.378871 Jy selfcal ! Performing phase self-cal ! Adding 50 model components to the UV plane model. ! The established model now contains 313 components and 0.378871 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059783Jy sigma=1.223314 ! Fit after self-cal, rms=0.059780Jy sigma=1.223229 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000645236 Jy ! Component: 100 - total flux cleaned = 0.00122353 Jy ! Component: 150 - total flux cleaned = 0.00169456 Jy ! Component: 200 - total flux cleaned = 0.00213629 Jy ! Total flux subtracted in 200 components = 0.00213629 Jy ! Clean residual min=-0.001427 max=0.001424 Jy/beam ! Clean residual mean=0.000005 rms=0.000349 Jy/beam ! Combined flux in latest and established models = 0.381007 Jy ! Performing phase self-cal ! Adding 53 model components to the UV plane model. ! The established model now contains 321 components and 0.381007 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059748Jy sigma=1.222435 ! Fit after self-cal, rms=0.059746Jy sigma=1.222400 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059746Jy sigma=1.222400 ! Fit after self-cal, rms=0.059499Jy sigma=1.222240 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.33 mas, bmaj=2.448 mas, bpa=79.26 degrees ! Estimated noise=0.250544 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00203127 Jy ! Component: 100 - total flux cleaned = 0.00320291 Jy ! Component: 150 - total flux cleaned = 0.0039594 Jy ! Component: 200 - total flux cleaned = 0.00463919 Jy ! Total flux subtracted in 200 components = 0.00463919 Jy ! Clean residual min=-0.001902 max=0.001955 Jy/beam ! Clean residual mean=0.000007 rms=0.000494 Jy/beam ! Combined flux in latest and established models = 0.385646 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 334 components and 0.385646 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059479Jy sigma=1.221526 ! Fit after self-cal, rms=0.059470Jy sigma=1.221349 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000768607 Jy ! Component: 100 - total flux cleaned = 0.00121946 Jy ! Component: 150 - total flux cleaned = 0.00154206 Jy ! Component: 200 - total flux cleaned = 0.00187711 Jy ! Total flux subtracted in 200 components = 0.00187711 Jy ! Clean residual min=-0.001832 max=0.001811 Jy/beam ! Clean residual mean=0.000002 rms=0.000469 Jy/beam ! Combined flux in latest and established models = 0.387523 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 340 components and 0.387524 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059467Jy sigma=1.221209 ! Fit after self-cal, rms=0.059463Jy sigma=1.221148 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=1.077 mas, bmaj=1.283 mas, bpa=20.26 degrees ! Estimated noise=0.199563 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.077 x 1.283 at 20.26 degrees (North through East) ! Clean map min=-0.0013257 max=0.11208 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8189 mas, bmaj=1.022 mas, bpa=12.74 degrees ! Estimated noise=0.372502 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0912379 Jy ! Component: 100 - total flux cleaned = 0.139174 Jy ! Component: 150 - total flux cleaned = 0.1694 Jy ! Component: 200 - total flux cleaned = 0.190247 Jy ! Total flux subtracted in 200 components = 0.190247 Jy ! Clean residual min=-0.005248 max=0.012031 Jy/beam ! Clean residual mean=0.000021 rms=0.001464 Jy/beam ! Combined flux in latest and established models = 0.190247 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.190247 Jy ! Inverting map and beam ! Estimated beam: bmin=1.077 mas, bmaj=1.283 mas, bpa=20.26 degrees ! Estimated noise=0.199563 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0294003 Jy ! Component: 100 - total flux cleaned = 0.0510782 Jy ! Component: 150 - total flux cleaned = 0.0683669 Jy ! Component: 200 - total flux cleaned = 0.0826199 Jy ! Total flux subtracted in 200 components = 0.0826199 Jy ! Clean residual min=-0.004589 max=0.008834 Jy/beam ! Clean residual mean=0.000065 rms=0.001623 Jy/beam ! Combined flux in latest and established models = 0.272867 Jy ! Adding 80 model components to the UV plane model. ! The established model now contains 96 components and 0.272867 Jy ! Inverting map ! Added new window around map position (-0.2, -2.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0119975 Jy ! Component: 100 - total flux cleaned = 0.0222314 Jy ! Component: 150 - total flux cleaned = 0.0310815 Jy ! Component: 200 - total flux cleaned = 0.0388258 Jy ! Total flux subtracted in 200 components = 0.0388258 Jy ! Clean residual min=-0.003228 max=0.005568 Jy/beam ! Clean residual mean=0.000044 rms=0.001052 Jy/beam ! Combined flux in latest and established models = 0.311693 Jy ! Adding 80 model components to the UV plane model. ! The established model now contains 158 components and 0.311693 Jy ! Inverting map ! Added new window around map position (-0.4, 1.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00694655 Jy ! Component: 100 - total flux cleaned = 0.0130471 Jy ! Component: 150 - total flux cleaned = 0.0184897 Jy ! Component: 200 - total flux cleaned = 0.0233577 Jy ! Total flux subtracted in 200 components = 0.0233577 Jy ! Clean residual min=-0.002480 max=0.003949 Jy/beam ! Clean residual mean=0.000030 rms=0.000750 Jy/beam ! Combined flux in latest and established models = 0.33505 Jy ! Adding 67 model components to the UV plane model. ! The established model now contains 196 components and 0.33505 Jy ! Inverting map ! Added new window around map position (0.6, -15.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00457964 Jy ! Component: 100 - total flux cleaned = 0.00857399 Jy ! Component: 150 - total flux cleaned = 0.0121859 Jy ! Component: 200 - total flux cleaned = 0.0154644 Jy ! Total flux subtracted in 200 components = 0.0154644 Jy ! Clean residual min=-0.002079 max=0.002366 Jy/beam ! Clean residual mean=0.000020 rms=0.000568 Jy/beam ! Combined flux in latest and established models = 0.350515 Jy ! Adding 73 model components to the UV plane model. ! The established model now contains 242 components and 0.350515 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.33 mas, bmaj=2.448 mas, bpa=79.26 degrees ! Estimated noise=0.250544 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00591945 Jy ! Component: 100 - total flux cleaned = 0.0105991 Jy ! Component: 150 - total flux cleaned = 0.0144273 Jy ! Component: 200 - total flux cleaned = 0.0176582 Jy ! Total flux subtracted in 200 components = 0.0176582 Jy ! Clean residual min=-0.002350 max=0.002461 Jy/beam ! Clean residual mean=0.000019 rms=0.000689 Jy/beam ! Combined flux in latest and established models = 0.368173 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00277374 Jy ! Component: 100 - total flux cleaned = 0.00517001 Jy ! Component: 150 - total flux cleaned = 0.00724982 Jy ! Component: 200 - total flux cleaned = 0.00906625 Jy ! Total flux subtracted in 200 components = 0.00906625 Jy ! Clean residual min=-0.002059 max=0.002104 Jy/beam ! Clean residual mean=0.000010 rms=0.000542 Jy/beam ! Combined flux in latest and established models = 0.377239 Jy ! Adding 157 model components to the UV plane model. ! The established model now contains 359 components and 0.377239 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.077 mas, bmaj=1.283 mas, bpa=20.26 degrees ! Estimated noise=0.199563 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000615345 Jy ! Component: 100 - total flux cleaned = 0.00141644 Jy ! Component: 150 - total flux cleaned = 0.00214168 Jy ! Component: 200 - total flux cleaned = 0.00272832 Jy ! Total flux subtracted in 200 components = 0.00272832 Jy ! Clean residual min=-0.001551 max=0.001342 Jy/beam ! Clean residual mean=0.000004 rms=0.000329 Jy/beam ! Combined flux in latest and established models = 0.379968 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 390 components and 0.379968 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059450Jy sigma=1.221068 ! Fit after self-cal, rms=0.059411Jy sigma=1.220245 wmodel J2125+6423_X_map.mod ! Writing 390 model components to file: J2125+6423_X_map.mod wobs J2125+6423_X_uvs.fits ! Writing UV FITS file: J2125+6423_X_uvs.fits wwins J2125+6423_X_map.win ! wwins: Wrote 12 windows to J2125+6423_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000569278 Jy ! Component: 100 - total flux cleaned = -0.000786256 Jy ! Component: 150 - total flux cleaned = -0.000947556 Jy ! Component: 200 - total flux cleaned = -0.000991458 Jy ! Component: 250 - total flux cleaned = -0.000926871 Jy ! Component: 300 - total flux cleaned = -0.00080104 Jy ! Component: 350 - total flux cleaned = -0.000657515 Jy ! Component: 400 - total flux cleaned = -0.000537616 Jy ! Component: 450 - total flux cleaned = -0.000478787 Jy ! Component: 500 - total flux cleaned = -0.000382217 Jy ! Component: 550 - total flux cleaned = -0.000269025 Jy ! Component: 600 - total flux cleaned = -0.000158031 Jy ! Component: 650 - total flux cleaned = -3.05358e-05 Jy ! Component: 700 - total flux cleaned = 7.71411e-05 Jy ! Component: 750 - total flux cleaned = 0.00020056 Jy ! Component: 800 - total flux cleaned = 0.000252695 Jy ! Component: 850 - total flux cleaned = 0.000355499 Jy ! Component: 900 - total flux cleaned = 0.000338344 Jy ! Component: 950 - total flux cleaned = 0.000371614 Jy ! Component: 1000 - total flux cleaned = 0.000355252 Jy ! Component: 1050 - total flux cleaned = 0.000371834 Jy ! Component: 1100 - total flux cleaned = 0.000371887 Jy ! Component: 1150 - total flux cleaned = 0.000403957 Jy ! Component: 1200 - total flux cleaned = 0.000356142 Jy ! Component: 1250 - total flux cleaned = 0.000356215 Jy ! Component: 1300 - total flux cleaned = 0.000403091 Jy ! Component: 1350 - total flux cleaned = 0.000433615 Jy ! Component: 1400 - total flux cleaned = 0.000387758 Jy ! Component: 1450 - total flux cleaned = 0.000372746 Jy ! Component: 1500 - total flux cleaned = 0.000387821 Jy ! Component: 1550 - total flux cleaned = 0.000373011 Jy ! Component: 1600 - total flux cleaned = 0.000373086 Jy ! Component: 1650 - total flux cleaned = 0.000329019 Jy ! Component: 1700 - total flux cleaned = 0.000387296 Jy ! Component: 1750 - total flux cleaned = 0.000344025 Jy ! Component: 1800 - total flux cleaned = 0.000358133 Jy ! Component: 1850 - total flux cleaned = 0.000358145 Jy ! Component: 1900 - total flux cleaned = 0.000302031 Jy ! Component: 1950 - total flux cleaned = 0.000288083 Jy ! Component: 2000 - total flux cleaned = 0.000301838 Jy ! Component: 2050 - total flux cleaned = 0.000205764 Jy ! Component: 2100 - total flux cleaned = 0.00020575 Jy ! Component: 2150 - total flux cleaned = 0.000205736 Jy ! Component: 2200 - total flux cleaned = 0.000152041 Jy ! Component: 2250 - total flux cleaned = 9.87057e-05 Jy ! Component: 2300 - total flux cleaned = 0.00013827 Jy ! Component: 2350 - total flux cleaned = 0.000138148 Jy ! Component: 2400 - total flux cleaned = 8.61478e-05 Jy ! Component: 2450 - total flux cleaned = 4.73006e-05 Jy ! Component: 2500 - total flux cleaned = 6.01554e-05 Jy ! Component: 2550 - total flux cleaned = 4.7402e-05 Jy ! Component: 2600 - total flux cleaned = 6.01094e-05 Jy ! Component: 2650 - total flux cleaned = 6.01432e-05 Jy ! Component: 2700 - total flux cleaned = 9.90734e-06 Jy ! Component: 2750 - total flux cleaned = -2.53504e-06 Jy ! Component: 2800 - total flux cleaned = 9.82199e-06 Jy ! Component: 2850 - total flux cleaned = 9.8959e-06 Jy ! Component: 2900 - total flux cleaned = 2.20659e-05 Jy ! Component: 2950 - total flux cleaned = -2.66752e-05 Jy ! Component: 3000 - total flux cleaned = 9.66585e-06 Jy ! Component: 3050 - total flux cleaned = -5.02195e-05 Jy ! Component: 3100 - total flux cleaned = -1.44571e-05 Jy ! Component: 3150 - total flux cleaned = -3.81511e-05 Jy ! Component: 3200 - total flux cleaned = -8.52632e-05 Jy ! Component: 3250 - total flux cleaned = -0.00010869 Jy ! Component: 3300 - total flux cleaned = -0.000155198 Jy ! Component: 3350 - total flux cleaned = -0.000131907 Jy ! Component: 3400 - total flux cleaned = -0.000143556 Jy ! Component: 3450 - total flux cleaned = -0.000189464 Jy ! Component: 3500 - total flux cleaned = -0.000234913 Jy ! Component: 3550 - total flux cleaned = -0.000223613 Jy ! Component: 3600 - total flux cleaned = -0.000189847 Jy ! Component: 3650 - total flux cleaned = -0.000234513 Jy ! Component: 3700 - total flux cleaned = -0.000267849 Jy ! Component: 3750 - total flux cleaned = -0.000278904 Jy ! Component: 3800 - total flux cleaned = -0.000256917 Jy ! Component: 3850 - total flux cleaned = -0.000256989 Jy ! Component: 3900 - total flux cleaned = -0.000267887 Jy ! Component: 3950 - total flux cleaned = -0.000311088 Jy ! Component: 4000 - total flux cleaned = -0.000246445 Jy ! Component: 4050 - total flux cleaned = -0.000235661 Jy ! Total flux subtracted in 4096 components = -0.000278385 Jy ! Clean residual min=-0.000689 max=0.000592 Jy/beam ! Clean residual mean=0.000003 rms=0.000189 Jy/beam ! Combined flux in latest and established models = 0.379689 Jy keep ! Adding 357 model components to the UV plane model. ! The established model now contains 747 components and 0.379689 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J2125+6423_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.077 x 1.283 at 20.26 degrees (North through East) ! Clean map min=-0.0011356 max=0.11134 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J2125+6423_X_map.fits wmodel /vlbi/uf001/uva//J2125+6423_X_map.mod ! Writing 747 model components to file: /vlbi/uf001/uva//J2125+6423_X_map.mod wobs /vlbi/uf001/uva//J2125+6423_X_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J2125+6423_X_uvs.fits wwins /vlbi/uf001/uva//J2125+6423_X_map.win ! wwins: Wrote 13 windows to /vlbi/uf001/uva//J2125+6423_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.111338 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000189283 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.510025 0.510025 1.02005 2.0401 4.0802 8.1604 16.3208 32.6416 65.2832 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.111 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 588.206 quit ! Quitting program ! Log file /vlbi/uf001/uva//J2125+6423_X_dfm.log closed on Mon Jan 14 05:52:27 2019