! Started logfile: /vlbi/uf001/uva//J2125+0441_S_dfm.log on Mon Jan 14 05:51:51 2019 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /vlbi/uf001/uva//J2125+0441_S_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J2125+0441_S_uva.fits ! AN table 1: 42 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.959788 visibilities/baseline/integration-bin. ! Found source: J2125+0441 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 44 lines of history. ! ! Reading 5442 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J2125+0441_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 69 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 69 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 69 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.050292Jy sigma=21.334632 ! Fit after self-cal, rms=0.722111Jy sigma=14.498101 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.709 mas, bmaj=6.986 mas, bpa=-4.076 degrees ! Estimated noise=0.635141 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.218959 Jy ! Component: 100 - total flux cleaned = 0.268687 Jy ! Total flux subtracted in 100 components = 0.268687 Jy ! Clean residual min=-0.007514 max=0.019302 Jy/beam ! Clean residual mean=-0.000015 rms=0.002421 Jy/beam ! Combined flux in latest and established models = 0.268687 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.268687 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.078717Jy sigma=1.510364 ! Fit after self-cal, rms=0.078716Jy sigma=1.510237 ! Inverting map ! Added new window around map position (2.5, -9). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0198382 Jy ! Component: 100 - total flux cleaned = 0.0306405 Jy ! Total flux subtracted in 100 components = 0.0306405 Jy ! Clean residual min=-0.007440 max=0.012931 Jy/beam ! Clean residual mean=-0.000009 rms=0.001909 Jy/beam ! Combined flux in latest and established models = 0.299328 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 20 components and 0.299328 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.073465Jy sigma=1.386013 ! Fit after self-cal, rms=0.073386Jy sigma=1.383683 ! Inverting map ! Added new window around map position (4, 10.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0108732 Jy ! Component: 100 - total flux cleaned = 0.0165756 Jy ! Total flux subtracted in 100 components = 0.0165756 Jy ! Clean residual min=-0.006696 max=0.009804 Jy/beam ! Clean residual mean=-0.000006 rms=0.001717 Jy/beam ! Combined flux in latest and established models = 0.315903 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 34 components and 0.315903 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.071673Jy sigma=1.347015 ! Fit after self-cal, rms=0.071575Jy sigma=1.344849 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.231 mas, bmaj=7.732 mas, bpa=-4.301 degrees ! Estimated noise=0.523035 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4.5, -10). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00935814 Jy ! Component: 100 - total flux cleaned = 0.0138337 Jy ! Component: 150 - total flux cleaned = 0.0162062 Jy ! Component: 200 - total flux cleaned = 0.0180274 Jy ! Total flux subtracted in 200 components = 0.0180274 Jy ! Clean residual min=-0.005359 max=0.006398 Jy/beam ! Clean residual mean=-0.000015 rms=0.001505 Jy/beam ! Combined flux in latest and established models = 0.333931 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 57 components and 0.333931 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.070025Jy sigma=1.313149 ! Fit after self-cal, rms=0.069980Jy sigma=1.312043 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.231 x 7.732 at -4.301 degrees (North through East) ! Clean map min=-0.0054319 max=0.27487 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.95 HN 1.00 KP 1.01 ! LA 0.95 MK 1.02 NL 0.96 OV 0.97 ! PT 1.01 SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.17 FD 0.95 HN 1.00 KP 0.99 ! LA 0.95 MK 1.01 NL 1.06 OV 1.01 ! PT 1.00 SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.92 HN 1.02 KP 1.01 ! LA 0.95 MK 1.00 NL 1.05 OV 0.99 ! PT 1.00 SC 1.01 ! ! ! Fit before self-cal, rms=0.069980Jy sigma=1.312043 ! Fit after self-cal, rms=0.068736Jy sigma=1.268549 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.246 mas, bmaj=7.816 mas, bpa=-4.291 degrees ! Estimated noise=0.52229 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00386911 Jy ! Component: 100 - total flux cleaned = -0.00643937 Jy ! Component: 150 - total flux cleaned = -0.00748605 Jy ! Component: 200 - total flux cleaned = -0.00782388 Jy ! Total flux subtracted in 200 components = -0.00782388 Jy ! Clean residual min=-0.005209 max=0.004515 Jy/beam ! Clean residual mean=-0.000011 rms=0.001220 Jy/beam ! Combined flux in latest and established models = 0.326107 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 85 components and 0.326107 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.068451Jy sigma=1.262650 ! Fit after self-cal, rms=0.068449Jy sigma=1.262374 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.068449Jy sigma=1.262374 ! Fit after self-cal, rms=0.067259Jy sigma=1.207705 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.24 mas, bmaj=7.839 mas, bpa=-4.245 degrees ! Estimated noise=0.523065 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00323581 Jy ! Component: 100 - total flux cleaned = -0.0041127 Jy ! Component: 150 - total flux cleaned = -0.00436715 Jy ! Component: 200 - total flux cleaned = -0.00453259 Jy ! Total flux subtracted in 200 components = -0.00453259 Jy ! Clean residual min=-0.003013 max=0.002717 Jy/beam ! Clean residual mean=-0.000005 rms=0.000738 Jy/beam ! Combined flux in latest and established models = 0.321574 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 102 components and 0.321574 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.067085Jy sigma=1.203309 ! Fit after self-cal, rms=0.067100Jy sigma=1.203000 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000269257 Jy ! Component: 100 - total flux cleaned = -0.000448442 Jy ! Component: 150 - total flux cleaned = -0.00048908 Jy ! Component: 200 - total flux cleaned = -0.000526136 Jy ! Total flux subtracted in 200 components = -0.000526136 Jy ! Clean residual min=-0.002916 max=0.002733 Jy/beam ! Clean residual mean=-0.000005 rms=0.000722 Jy/beam ! Combined flux in latest and established models = 0.321048 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 124 components and 0.321048 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.067054Jy sigma=1.201748 ! Fit after self-cal, rms=0.067051Jy sigma=1.201682 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.067051Jy sigma=1.201682 ! Fit after self-cal, rms=0.067826Jy sigma=1.197196 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.237 mas, bmaj=7.847 mas, bpa=-4.182 degrees ! Estimated noise=0.522543 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00224402 Jy ! Component: 100 - total flux cleaned = -0.00345159 Jy ! Component: 150 - total flux cleaned = -0.003594 Jy ! Component: 200 - total flux cleaned = -0.00371654 Jy ! Total flux subtracted in 200 components = -0.00371654 Jy ! Clean residual min=-0.002604 max=0.002603 Jy/beam ! Clean residual mean=-0.000006 rms=0.000633 Jy/beam ! Combined flux in latest and established models = 0.317332 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 132 components and 0.317332 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.067723Jy sigma=1.195112 ! Fit after self-cal, rms=0.067727Jy sigma=1.195021 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00018611 Jy ! Component: 100 - total flux cleaned = -0.000289132 Jy ! Component: 150 - total flux cleaned = -0.000379104 Jy ! Component: 200 - total flux cleaned = -0.000407073 Jy ! Total flux subtracted in 200 components = -0.000407073 Jy ! Clean residual min=-0.002519 max=0.002612 Jy/beam ! Clean residual mean=-0.000007 rms=0.000624 Jy/beam ! Combined flux in latest and established models = 0.316924 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 142 components and 0.316924 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.067695Jy sigma=1.194452 ! Fit after self-cal, rms=0.067693Jy sigma=1.194425 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.067693Jy sigma=1.194425 ! Fit after self-cal, rms=0.067889Jy sigma=1.193624 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.51 mas, bmaj=11.99 mas, bpa=-0.746 degrees ! Estimated noise=0.660966 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00137158 Jy ! Component: 100 - total flux cleaned = -0.00165586 Jy ! Component: 150 - total flux cleaned = -0.00165398 Jy ! Component: 200 - total flux cleaned = -0.00162086 Jy ! Total flux subtracted in 200 components = -0.00162086 Jy ! Clean residual min=-0.002959 max=0.002845 Jy/beam ! Clean residual mean=-0.000012 rms=0.000771 Jy/beam ! Combined flux in latest and established models = 0.315304 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 160 components and 0.315304 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.067855Jy sigma=1.192884 ! Fit after self-cal, rms=0.067854Jy sigma=1.192831 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.35421e-06 Jy ! Component: 100 - total flux cleaned = 7.83292e-05 Jy ! Component: 150 - total flux cleaned = 0.000104981 Jy ! Component: 200 - total flux cleaned = 0.000152663 Jy ! Total flux subtracted in 200 components = 0.000152663 Jy ! Clean residual min=-0.002921 max=0.002806 Jy/beam ! Clean residual mean=-0.000012 rms=0.000760 Jy/beam ! Combined flux in latest and established models = 0.315456 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 166 components and 0.315456 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.067850Jy sigma=1.192753 ! Fit after self-cal, rms=0.067847Jy sigma=1.192733 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.235 mas, bmaj=7.854 mas, bpa=-4.146 degrees ! Estimated noise=0.522107 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.235 x 7.854 at -4.146 degrees (North through East) ! Clean map min=-0.0038697 max=0.27657 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.71 mas, bmaj=7.077 mas, bpa=-3.952 degrees ! Estimated noise=0.636676 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.219444 Jy ! Component: 100 - total flux cleaned = 0.268793 Jy ! Component: 150 - total flux cleaned = 0.285366 Jy ! Component: 200 - total flux cleaned = 0.294005 Jy ! Total flux subtracted in 200 components = 0.294005 Jy ! Clean residual min=-0.003825 max=0.005239 Jy/beam ! Clean residual mean=-0.000008 rms=0.000929 Jy/beam ! Combined flux in latest and established models = 0.294005 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.294005 Jy ! Inverting map and beam ! Estimated beam: bmin=3.235 mas, bmaj=7.854 mas, bpa=-4.146 degrees ! Estimated noise=0.522107 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2.5, 8.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00687948 Jy ! Component: 100 - total flux cleaned = 0.0111914 Jy ! Component: 150 - total flux cleaned = 0.014348 Jy ! Component: 200 - total flux cleaned = 0.0155759 Jy ! Total flux subtracted in 200 components = 0.0155759 Jy ! Clean residual min=-0.002726 max=0.002537 Jy/beam ! Clean residual mean=-0.000010 rms=0.000654 Jy/beam ! Combined flux in latest and established models = 0.309581 Jy ! Adding 53 model components to the UV plane model. ! The established model now contains 67 components and 0.309581 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.51 mas, bmaj=11.99 mas, bpa=-0.746 degrees ! Estimated noise=0.660966 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0028318 Jy ! Component: 100 - total flux cleaned = 0.00386594 Jy ! Component: 150 - total flux cleaned = 0.00449573 Jy ! Component: 200 - total flux cleaned = 0.00506139 Jy ! Total flux subtracted in 200 components = 0.00506139 Jy ! Clean residual min=-0.003110 max=0.002751 Jy/beam ! Clean residual mean=-0.000013 rms=0.000751 Jy/beam ! Combined flux in latest and established models = 0.314642 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00032034 Jy ! Component: 100 - total flux cleaned = 0.00057259 Jy ! Component: 150 - total flux cleaned = 0.00080275 Jy ! Component: 200 - total flux cleaned = 0.00101521 Jy ! Total flux subtracted in 200 components = 0.00101521 Jy ! Clean residual min=-0.003015 max=0.002771 Jy/beam ! Clean residual mean=-0.000011 rms=0.000739 Jy/beam ! Combined flux in latest and established models = 0.315657 Jy ! Adding 59 model components to the UV plane model. ! The established model now contains 120 components and 0.315657 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.235 mas, bmaj=7.854 mas, bpa=-4.146 degrees ! Estimated noise=0.522107 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000721684 Jy ! Component: 100 - total flux cleaned = -0.000625173 Jy ! Component: 150 - total flux cleaned = -0.000404521 Jy ! Component: 200 - total flux cleaned = -0.000129359 Jy ! Total flux subtracted in 200 components = -0.000129359 Jy ! Clean residual min=-0.002443 max=0.002377 Jy/beam ! Clean residual mean=-0.000005 rms=0.000584 Jy/beam ! Combined flux in latest and established models = 0.315528 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 137 components and 0.315528 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.067792Jy sigma=1.191988 ! Fit after self-cal, rms=0.067769Jy sigma=1.191511 wmodel J2125+0441_S_map.mod ! Writing 137 model components to file: J2125+0441_S_map.mod wobs J2125+0441_S_uvs.fits ! Writing UV FITS file: J2125+0441_S_uvs.fits wwins J2125+0441_S_map.win ! wwins: Wrote 5 windows to J2125+0441_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000464729 Jy ! Component: 100 - total flux cleaned = -0.000664433 Jy ! Component: 150 - total flux cleaned = -0.000740043 Jy ! Component: 200 - total flux cleaned = -0.000776193 Jy ! Component: 250 - total flux cleaned = -0.000705316 Jy ! Component: 300 - total flux cleaned = -0.000601916 Jy ! Component: 350 - total flux cleaned = -0.000500657 Jy ! Component: 400 - total flux cleaned = -0.000336395 Jy ! Component: 450 - total flux cleaned = -0.000304131 Jy ! Component: 500 - total flux cleaned = -8.25444e-05 Jy ! Component: 550 - total flux cleaned = 4.17141e-05 Jy ! Component: 600 - total flux cleaned = 0.000285222 Jy ! Component: 650 - total flux cleaned = 0.000464679 Jy ! Component: 700 - total flux cleaned = 0.000787099 Jy ! Component: 750 - total flux cleaned = 0.00104648 Jy ! Component: 800 - total flux cleaned = 0.00127337 Jy ! Component: 850 - total flux cleaned = 0.00146837 Jy ! Component: 900 - total flux cleaned = 0.00176972 Jy ! Component: 950 - total flux cleaned = 0.00187721 Jy ! Component: 1000 - total flux cleaned = 0.00209001 Jy ! Component: 1050 - total flux cleaned = 0.00229937 Jy ! Component: 1100 - total flux cleaned = 0.00235044 Jy ! Component: 1150 - total flux cleaned = 0.00252817 Jy ! Component: 1200 - total flux cleaned = 0.00257822 Jy ! Component: 1250 - total flux cleaned = 0.00270218 Jy ! Component: 1300 - total flux cleaned = 0.00277575 Jy ! Component: 1350 - total flux cleaned = 0.00292035 Jy ! Component: 1400 - total flux cleaned = 0.0029918 Jy ! Component: 1450 - total flux cleaned = 0.00306206 Jy ! Component: 1500 - total flux cleaned = 0.00317807 Jy ! Component: 1550 - total flux cleaned = 0.0033381 Jy ! Component: 1600 - total flux cleaned = 0.00336095 Jy ! Component: 1650 - total flux cleaned = 0.00347297 Jy ! Component: 1700 - total flux cleaned = 0.00356166 Jy ! Component: 1750 - total flux cleaned = 0.0036056 Jy ! Component: 1800 - total flux cleaned = 0.00367058 Jy ! Component: 1850 - total flux cleaned = 0.0037777 Jy ! Component: 1900 - total flux cleaned = 0.00381999 Jy ! Component: 1950 - total flux cleaned = 0.00382034 Jy ! Component: 2000 - total flux cleaned = 0.0039249 Jy ! Component: 2050 - total flux cleaned = 0.00409006 Jy ! Component: 2100 - total flux cleaned = 0.00406942 Jy ! Component: 2150 - total flux cleaned = 0.00421084 Jy ! Component: 2200 - total flux cleaned = 0.00421084 Jy ! Component: 2250 - total flux cleaned = 0.0042704 Jy ! Component: 2300 - total flux cleaned = 0.00432953 Jy ! Component: 2350 - total flux cleaned = 0.00434931 Jy ! Component: 2400 - total flux cleaned = 0.004427 Jy ! Component: 2450 - total flux cleaned = 0.0045226 Jy ! Component: 2500 - total flux cleaned = 0.00457959 Jy ! Component: 2550 - total flux cleaned = 0.00467409 Jy ! Component: 2600 - total flux cleaned = 0.00474895 Jy ! Component: 2650 - total flux cleaned = 0.0048416 Jy ! Component: 2700 - total flux cleaned = 0.00491496 Jy ! Component: 2750 - total flux cleaned = 0.00498781 Jy ! Component: 2800 - total flux cleaned = 0.00507816 Jy ! Component: 2850 - total flux cleaned = 0.00516779 Jy ! Component: 2900 - total flux cleaned = 0.0052391 Jy ! Component: 2950 - total flux cleaned = 0.00538033 Jy ! Component: 3000 - total flux cleaned = 0.00536274 Jy ! Component: 3050 - total flux cleaned = 0.0055368 Jy ! Component: 3100 - total flux cleaned = 0.00560572 Jy ! Component: 3150 - total flux cleaned = 0.00562284 Jy ! Component: 3200 - total flux cleaned = 0.00569087 Jy ! Component: 3250 - total flux cleaned = 0.00575826 Jy ! Component: 3300 - total flux cleaned = 0.00574179 Jy ! Component: 3350 - total flux cleaned = 0.00580841 Jy ! Component: 3400 - total flux cleaned = 0.00592405 Jy ! Component: 3450 - total flux cleaned = 0.0059731 Jy ! Component: 3500 - total flux cleaned = 0.00600543 Jy ! Component: 3550 - total flux cleaned = 0.00597302 Jy ! Component: 3600 - total flux cleaned = 0.0060375 Jy ! Component: 3650 - total flux cleaned = 0.00605365 Jy ! Component: 3700 - total flux cleaned = 0.0061012 Jy ! Component: 3750 - total flux cleaned = 0.00614849 Jy ! Component: 3800 - total flux cleaned = 0.00619537 Jy ! Component: 3850 - total flux cleaned = 0.00617983 Jy ! Component: 3900 - total flux cleaned = 0.00625699 Jy ! Component: 3950 - total flux cleaned = 0.00624184 Jy ! Component: 4000 - total flux cleaned = 0.00631794 Jy ! Component: 4050 - total flux cleaned = 0.00630291 Jy ! Total flux subtracted in 4096 components = 0.00642336 Jy ! Clean residual min=-0.000799 max=0.000823 Jy/beam ! Clean residual mean=-0.000001 rms=0.000285 Jy/beam ! Combined flux in latest and established models = 0.321951 Jy keep ! Adding 305 model components to the UV plane model. ! The established model now contains 442 components and 0.321951 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J2125+0441_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.235 x 7.854 at -4.146 degrees (North through East) ! Clean map min=-0.0022961 max=0.27714 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J2125+0441_S_map.fits wmodel /vlbi/uf001/uva//J2125+0441_S_map.mod ! Writing 442 model components to file: /vlbi/uf001/uva//J2125+0441_S_map.mod wobs /vlbi/uf001/uva//J2125+0441_S_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J2125+0441_S_uvs.fits wwins /vlbi/uf001/uva//J2125+0441_S_map.win ! wwins: Wrote 6 windows to /vlbi/uf001/uva//J2125+0441_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.277143 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000282068 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.305331 0.305331 0.610662 1.22132 2.44265 4.88529 9.77059 19.5412 39.0823 78.1647 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.277 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 982.54 quit ! Quitting program ! Log file /vlbi/uf001/uva//J2125+0441_S_dfm.log closed on Mon Jan 14 05:51:55 2019