! Started logfile: /vlbi/uf001/uva//J2124-1438_S_dfm.log on Mon Jan 14 05:51:29 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J2124-1438_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J2124-1438_S_uva.fits
! AN table 1: 38 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.788743 visibilities/baseline/integration-bin.
! Found source: J2124-1438
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 3237 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J2124-1438_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.020582Jy  sigma=18.217895
! Fit after  self-cal, rms=0.879782Jy  sigma=15.680325
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.678 mas, bmaj=6.085 mas, bpa=-1.162 degrees
! Estimated noise=0.989049 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0918971 Jy
! Component: 100  -  total flux cleaned = 0.123378 Jy
! Total flux subtracted in 100 components = 0.123378 Jy
! Clean residual min=-0.008962 max=0.012830 Jy/beam
! Clean residual mean=0.000061 rms=0.002642 Jy/beam
! Combined flux in latest and established models = 0.123378 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.123378 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.089346Jy  sigma=1.410925
! Fit after  self-cal, rms=0.088895Jy  sigma=1.403727
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.182 mas, bmaj=7.107 mas, bpa=-0.2382 degrees
! Estimated noise=0.728076 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0179028 Jy
! Component: 100  -  total flux cleaned = 0.0260853 Jy
! Component: 150  -  total flux cleaned = 0.0300986 Jy
! Component: 200  -  total flux cleaned = 0.0307126 Jy
! Total flux subtracted in 200 components = 0.0307126 Jy
! Clean residual min=-0.007564 max=0.011245 Jy/beam
! Clean residual mean=0.000038 rms=0.002135 Jy/beam
! Combined flux in latest and established models = 0.15409 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 26 components and 0.15409 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.085692Jy  sigma=1.336852
! Fit after  self-cal, rms=0.085613Jy  sigma=1.335174
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.182 x 7.107 at -0.2382 degrees (North through East)
! Clean map  min=-0.0074486  max=0.11977 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     HN        1.05     KP        0.98     LA        0.93     
!   MK        0.98     NL        1.06     OV        0.95     PT        1.03     
!   SC        0.97     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.50     HN        1.04     KP        0.90     LA        0.98     
!   MK        0.97     NL        1.14     OV        0.80     PT        1.00     
!   SC        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.11     HN        1.01     KP        1.02     LA        0.95     
!   MK        0.82     NL        1.11     OV        0.96     PT        0.99     
!   SC        0.96     
! 
! 
! Fit before self-cal, rms=0.085613Jy  sigma=1.335174
! Fit after  self-cal, rms=0.090830Jy  sigma=1.301870
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.135 mas, bmaj=7.062 mas, bpa=-0.7542 degrees
! Estimated noise=0.717555 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (5.5, 6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00729598 Jy
! Component: 100  -  total flux cleaned = 0.00905316 Jy
! Component: 150  -  total flux cleaned = 0.00988016 Jy
! Component: 200  -  total flux cleaned = 0.010442 Jy
! Total flux subtracted in 200 components = 0.010442 Jy
! Clean residual min=-0.005032 max=0.005856 Jy/beam
! Clean residual mean=0.000018 rms=0.001492 Jy/beam
! Combined flux in latest and established models = 0.164532 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 45 components and 0.164532 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.089956Jy  sigma=1.288797
! Fit after  self-cal, rms=0.090046Jy  sigma=1.286408
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.090046Jy  sigma=1.286408
! Fit after  self-cal, rms=0.088779Jy  sigma=1.266663
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.121 mas, bmaj=7.008 mas, bpa=-0.2349 degrees
! Estimated noise=0.71509 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00297011 Jy
! Component: 100  -  total flux cleaned = 0.00409894 Jy
! Component: 150  -  total flux cleaned = 0.00424858 Jy
! Component: 200  -  total flux cleaned = 0.00420299 Jy
! Total flux subtracted in 200 components = 0.00420299 Jy
! Clean residual min=-0.003329 max=0.004835 Jy/beam
! Clean residual mean=0.000010 rms=0.000983 Jy/beam
! Combined flux in latest and established models = 0.168735 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 65 components and 0.168735 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.088629Jy  sigma=1.264860
! Fit after  self-cal, rms=0.088654Jy  sigma=1.264388
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (22.5, 14).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0045303 Jy
! Component: 100  -  total flux cleaned = 0.00667079 Jy
! Component: 150  -  total flux cleaned = 0.00829552 Jy
! Component: 200  -  total flux cleaned = 0.00959019 Jy
! Total flux subtracted in 200 components = 0.00959019 Jy
! Clean residual min=-0.003061 max=0.003113 Jy/beam
! Clean residual mean=0.000006 rms=0.000797 Jy/beam
! Combined flux in latest and established models = 0.178325 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 94 components and 0.178325 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.088352Jy  sigma=1.259639
! Fit after  self-cal, rms=0.088322Jy  sigma=1.259320
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.088322Jy  sigma=1.259320
! Fit after  self-cal, rms=0.088736Jy  sigma=1.258899
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.118 mas, bmaj=6.991 mas, bpa=-0.3048 degrees
! Estimated noise=0.712658 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00161828 Jy
! Component: 100  -  total flux cleaned = 0.00229107 Jy
! Component: 150  -  total flux cleaned = 0.00279055 Jy
! Component: 200  -  total flux cleaned = 0.00316037 Jy
! Total flux subtracted in 200 components = 0.00316037 Jy
! Clean residual min=-0.002961 max=0.003125 Jy/beam
! Clean residual mean=0.000005 rms=0.000748 Jy/beam
! Combined flux in latest and established models = 0.181486 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 111 components and 0.181486 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.088668Jy  sigma=1.258137
! Fit after  self-cal, rms=0.088682Jy  sigma=1.258067
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000276222 Jy
! Component: 100  -  total flux cleaned = 0.000547522 Jy
! Component: 150  -  total flux cleaned = 0.000735183 Jy
! Component: 200  -  total flux cleaned = 0.000822564 Jy
! Total flux subtracted in 200 components = 0.000822564 Jy
! Clean residual min=-0.002898 max=0.003094 Jy/beam
! Clean residual mean=0.000005 rms=0.000735 Jy/beam
! Combined flux in latest and established models = 0.182308 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 121 components and 0.182308 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.088649Jy  sigma=1.257726
! Fit after  self-cal, rms=0.088651Jy  sigma=1.257704
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.088651Jy  sigma=1.257704
! Fit after  self-cal, rms=0.088965Jy  sigma=1.257594
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.648 mas, bmaj=13.69 mas, bpa=0.005581 degrees
! Estimated noise=0.970839 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000547301 Jy
! Component: 100  -  total flux cleaned = 0.000722275 Jy
! Component: 150  -  total flux cleaned = 0.000830122 Jy
! Component: 200  -  total flux cleaned = 0.000892146 Jy
! Total flux subtracted in 200 components = 0.000892146 Jy
! Clean residual min=-0.003496 max=0.003033 Jy/beam
! Clean residual mean=0.000012 rms=0.000957 Jy/beam
! Combined flux in latest and established models = 0.1832 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 134 components and 0.1832 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.088939Jy  sigma=1.257428
! Fit after  self-cal, rms=0.088950Jy  sigma=1.257354
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.15947e-07 Jy
! Component: 100  -  total flux cleaned = 6.64969e-07 Jy
! Component: 150  -  total flux cleaned = -5.54086e-05 Jy
! Component: 200  -  total flux cleaned = -0.000105567 Jy
! Total flux subtracted in 200 components = -0.000105567 Jy
! Clean residual min=-0.003298 max=0.003046 Jy/beam
! Clean residual mean=0.000011 rms=0.000942 Jy/beam
! Combined flux in latest and established models = 0.183095 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 142 components and 0.183095 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.088938Jy  sigma=1.257402
! Fit after  self-cal, rms=0.088941Jy  sigma=1.257360
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.117 mas, bmaj=6.982 mas, bpa=-0.3973 degrees
! Estimated noise=0.712648 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.117 x 6.982 at -0.3973 degrees (North through East)
! Clean map  min=-0.0026181  max=0.11779 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.626 mas, bmaj=5.997 mas, bpa=-0.9719 degrees
! Estimated noise=0.951975 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0892026 Jy
! Component: 100  -  total flux cleaned = 0.121162 Jy
! Component: 150  -  total flux cleaned = 0.135918 Jy
! Component: 200  -  total flux cleaned = 0.145185 Jy
! Total flux subtracted in 200 components = 0.145185 Jy
! Clean residual min=-0.005963 max=0.006109 Jy/beam
! Clean residual mean=0.000024 rms=0.001591 Jy/beam
! Combined flux in latest and established models = 0.145185 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 28 model components to the UV plane model.
! The established model now contains 28 components and 0.145185 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.117 mas, bmaj=6.982 mas, bpa=-0.3973 degrees
! Estimated noise=0.712648 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00962117 Jy
! Component: 100  -  total flux cleaned = 0.0159627 Jy
! Component: 150  -  total flux cleaned = 0.0208763 Jy
! Component: 200  -  total flux cleaned = 0.0247234 Jy
! Total flux subtracted in 200 components = 0.0247234 Jy
! Clean residual min=-0.003768 max=0.003249 Jy/beam
! Clean residual mean=0.000012 rms=0.000937 Jy/beam
! Combined flux in latest and established models = 0.169909 Jy
! Adding 36 model components to the UV plane model.
! The established model now contains 56 components and 0.169909 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.648 mas, bmaj=13.69 mas, bpa=0.005581 degrees
! Estimated noise=0.970839 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00507012 Jy
! Component: 100  -  total flux cleaned = 0.00848251 Jy
! Component: 150  -  total flux cleaned = 0.0107396 Jy
! Component: 200  -  total flux cleaned = 0.0116512 Jy
! Total flux subtracted in 200 components = 0.0116512 Jy
! Clean residual min=-0.003952 max=0.003000 Jy/beam
! Clean residual mean=0.000012 rms=0.001022 Jy/beam
! Combined flux in latest and established models = 0.18156 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000754718 Jy
! Component: 100  -  total flux cleaned = 0.00113565 Jy
! Component: 150  -  total flux cleaned = 0.00132727 Jy
! Component: 200  -  total flux cleaned = 0.00149753 Jy
! Total flux subtracted in 200 components = 0.00149753 Jy
! Clean residual min=-0.003573 max=0.003090 Jy/beam
! Clean residual mean=0.000011 rms=0.000971 Jy/beam
! Combined flux in latest and established models = 0.183057 Jy
! Adding 58 model components to the UV plane model.
! The established model now contains 110 components and 0.183057 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.117 mas, bmaj=6.982 mas, bpa=-0.3973 degrees
! Estimated noise=0.712648 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000138717 Jy
! Component: 100  -  total flux cleaned = 0.000132096 Jy
! Component: 150  -  total flux cleaned = 0.000229538 Jy
! Component: 200  -  total flux cleaned = 0.00045666 Jy
! Total flux subtracted in 200 components = 0.00045666 Jy
! Clean residual min=-0.002747 max=0.002970 Jy/beam
! Clean residual mean=0.000005 rms=0.000749 Jy/beam
! Combined flux in latest and established models = 0.183514 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 128 components and 0.183514 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.088974Jy  sigma=1.258327
! Fit after  self-cal, rms=0.088979Jy  sigma=1.258126
wmodel J2124-1438_S_map.mod
! Writing 128 model components to file: J2124-1438_S_map.mod
wobs   J2124-1438_S_uvs.fits
! Writing UV FITS file: J2124-1438_S_uvs.fits
wwins  J2124-1438_S_map.win
! wwins: Wrote 3 windows to J2124-1438_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 6.80985e-05 Jy
! Component: 100  -  total flux cleaned = -7.79705e-05 Jy
! Component: 150  -  total flux cleaned = -0.000311096 Jy
! Component: 200  -  total flux cleaned = -0.000667853 Jy
! Component: 250  -  total flux cleaned = -0.00105044 Jy
! Component: 300  -  total flux cleaned = -0.00141735 Jy
! Component: 350  -  total flux cleaned = -0.00161389 Jy
! Component: 400  -  total flux cleaned = -0.0017279 Jy
! Component: 450  -  total flux cleaned = -0.00180196 Jy
! Component: 500  -  total flux cleaned = -0.00201719 Jy
! Component: 550  -  total flux cleaned = -0.00222544 Jy
! Component: 600  -  total flux cleaned = -0.00239422 Jy
! Component: 650  -  total flux cleaned = -0.00249314 Jy
! Component: 700  -  total flux cleaned = -0.00265448 Jy
! Component: 750  -  total flux cleaned = -0.00277927 Jy
! Component: 800  -  total flux cleaned = -0.00283956 Jy
! Component: 850  -  total flux cleaned = -0.00298918 Jy
! Component: 900  -  total flux cleaned = -0.00307717 Jy
! Component: 950  -  total flux cleaned = -0.00324851 Jy
! Component: 1000  -  total flux cleaned = -0.00333259 Jy
! Component: 1050  -  total flux cleaned = -0.00349854 Jy
! Component: 1100  -  total flux cleaned = -0.00371495 Jy
! Component: 1150  -  total flux cleaned = -0.00371406 Jy
! Component: 1200  -  total flux cleaned = -0.00374038 Jy
! Component: 1250  -  total flux cleaned = -0.00374044 Jy
! Component: 1300  -  total flux cleaned = -0.00381617 Jy
! Component: 1350  -  total flux cleaned = -0.00379101 Jy
! Component: 1400  -  total flux cleaned = -0.00374173 Jy
! Component: 1450  -  total flux cleaned = -0.00374165 Jy
! Component: 1500  -  total flux cleaned = -0.00374174 Jy
! Component: 1550  -  total flux cleaned = -0.00376477 Jy
! Component: 1600  -  total flux cleaned = -0.00371866 Jy
! Component: 1650  -  total flux cleaned = -0.00369587 Jy
! Component: 1700  -  total flux cleaned = -0.00360613 Jy
! Component: 1750  -  total flux cleaned = -0.00356233 Jy
! Component: 1800  -  total flux cleaned = -0.00354054 Jy
! Component: 1850  -  total flux cleaned = -0.00349753 Jy
! Component: 1900  -  total flux cleaned = -0.00343383 Jy
! Component: 1950  -  total flux cleaned = -0.00337103 Jy
! Component: 2000  -  total flux cleaned = -0.00328808 Jy
! Component: 2050  -  total flux cleaned = -0.0031861 Jy
! Component: 2100  -  total flux cleaned = -0.00314564 Jy
! Component: 2150  -  total flux cleaned = -0.00308607 Jy
! Component: 2200  -  total flux cleaned = -0.00302686 Jy
! Component: 2250  -  total flux cleaned = -0.00304597 Jy
! Component: 2300  -  total flux cleaned = -0.00289218 Jy
! Component: 2350  -  total flux cleaned = -0.00283543 Jy
! Component: 2400  -  total flux cleaned = -0.00279783 Jy
! Component: 2450  -  total flux cleaned = -0.00270508 Jy
! Component: 2500  -  total flux cleaned = -0.00264978 Jy
! Component: 2550  -  total flux cleaned = -0.00257721 Jy
! Component: 2600  -  total flux cleaned = -0.00248745 Jy
! Component: 2650  -  total flux cleaned = -0.00239881 Jy
! Component: 2700  -  total flux cleaned = -0.00227601 Jy
! Component: 2750  -  total flux cleaned = -0.00220657 Jy
! Component: 2800  -  total flux cleaned = -0.00213781 Jy
! Component: 2850  -  total flux cleaned = -0.00205281 Jy
! Component: 2900  -  total flux cleaned = -0.00201919 Jy
! Component: 2950  -  total flux cleaned = -0.00195227 Jy
! Component: 3000  -  total flux cleaned = -0.00195226 Jy
! Component: 3050  -  total flux cleaned = -0.00187015 Jy
! Component: 3100  -  total flux cleaned = -0.00188643 Jy
! Component: 3150  -  total flux cleaned = -0.00185403 Jy
! Component: 3200  -  total flux cleaned = -0.00188604 Jy
! Component: 3250  -  total flux cleaned = -0.00190185 Jy
! Component: 3300  -  total flux cleaned = -0.00190175 Jy
! Component: 3350  -  total flux cleaned = -0.00188605 Jy
! Component: 3400  -  total flux cleaned = -0.00185516 Jy
! Component: 3450  -  total flux cleaned = -0.00187051 Jy
! Component: 3500  -  total flux cleaned = -0.00180954 Jy
! Component: 3550  -  total flux cleaned = -0.0017944 Jy
! Component: 3600  -  total flux cleaned = -0.00179429 Jy
! Component: 3650  -  total flux cleaned = -0.00171929 Jy
! Component: 3700  -  total flux cleaned = -0.00168956 Jy
! Component: 3750  -  total flux cleaned = -0.00165996 Jy
! Component: 3800  -  total flux cleaned = -0.00164537 Jy
! Component: 3850  -  total flux cleaned = -0.00154351 Jy
! Component: 3900  -  total flux cleaned = -0.00155794 Jy
! Component: 3950  -  total flux cleaned = -0.0014716 Jy
! Component: 4000  -  total flux cleaned = -0.00142872 Jy
! Component: 4050  -  total flux cleaned = -0.00141441 Jy
! Total flux subtracted in 4096 components = -0.00138608 Jy
! Clean residual min=-0.000855 max=0.000881 Jy/beam
! Clean residual mean=-0.000000 rms=0.000245 Jy/beam
! Combined flux in latest and established models = 0.182128 Jy
keep
! Adding 265 model components to the UV plane model.
! The established model now contains 393 components and 0.182128 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J2124-1438_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.117 x 6.982 at -0.3973 degrees (North through East)
! Clean map  min=-0.0022559  max=0.11553 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J2124-1438_S_map.fits
wmodel /vlbi/uf001/uva//J2124-1438_S_map.mod
! Writing 393 model components to file: /vlbi/uf001/uva//J2124-1438_S_map.mod
wobs   /vlbi/uf001/uva//J2124-1438_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J2124-1438_S_uvs.fits
wwins  /vlbi/uf001/uva//J2124-1438_S_map.win
! wwins: Wrote 4 windows to /vlbi/uf001/uva//J2124-1438_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.115529 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000240783 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.625252 0.625252 1.2505 2.50101 5.00202 10.004 20.0081 40.0161 80.0323
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.115 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  479.806 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J2124-1438_S_dfm.log closed on Mon Jan 14 05:51:34 2019