! Started logfile: /vlbi/uf001/uva//J2123-0519_S_b_dfm.log on Mon Jan 14 05:51:00 2019 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /vlbi/uf001/uva//J2123-0519_S_b_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J2123-0519_S_b_uva.fits ! AN table 1: 74 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.875 visibilities/baseline/integration-bin. ! Found source: J2123-0519 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 40 lines of history. ! ! Reading 5439 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J2123-0519_S_b] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 52 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 52 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 52 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.002727Jy sigma=18.436970 ! Fit after self-cal, rms=0.949826Jy sigma=17.588711 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.614 mas, bmaj=18.15 mas, bpa=-18.45 degrees ! Estimated noise=0.725132 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0391384 Jy ! Component: 100 - total flux cleaned = 0.0459009 Jy ! Total flux subtracted in 100 components = 0.0459009 Jy ! Clean residual min=-0.004723 max=0.004750 Jy/beam ! Clean residual mean=0.000002 rms=0.001182 Jy/beam ! Combined flux in latest and established models = 0.0459009 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.0459009 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.097415Jy sigma=1.265506 ! Fit after self-cal, rms=0.096517Jy sigma=1.246251 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.27 mas, bmaj=18.46 mas, bpa=-18.52 degrees ! Estimated noise=0.548945 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00645045 Jy ! Component: 100 - total flux cleaned = 0.0073132 Jy ! Component: 150 - total flux cleaned = 0.0075334 Jy ! Component: 200 - total flux cleaned = 0.00744223 Jy ! Total flux subtracted in 200 components = 0.00744223 Jy ! Clean residual min=-0.003402 max=0.003445 Jy/beam ! Clean residual mean=0.000001 rms=0.000910 Jy/beam ! Combined flux in latest and established models = 0.0533432 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 26 components and 0.0533432 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.095760Jy sigma=1.237680 ! Fit after self-cal, rms=0.095677Jy sigma=1.236846 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.27 x 18.46 at -18.52 degrees (North through East) ! Clean map min=-0.0039209 max=0.053089 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.76 FD 1.03 HN 1.08 KP 1.07 ! LA 0.95 MK 1.05 NL 1.33 PT 1.03 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.66 FD 1.02 HN 1.10 KP 1.00 ! LA 0.99 MK 0.99 NL 0.61 PT 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.83 FD 0.94 HN 1.01 KP 1.01 ! LA 1.07 MK 1.04 NL 0.98 PT 1.09 ! ! ! Fit before self-cal, rms=0.095677Jy sigma=1.236846 ! Fit after self-cal, rms=0.076771Jy sigma=1.220547 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.315 mas, bmaj=16.98 mas, bpa=-18.53 degrees ! Estimated noise=0.543496 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00167613 Jy ! Component: 100 - total flux cleaned = 0.00224554 Jy ! Component: 150 - total flux cleaned = 0.00228102 Jy ! Component: 200 - total flux cleaned = 0.00225222 Jy ! Total flux subtracted in 200 components = 0.00225222 Jy ! Clean residual min=-0.003035 max=0.003106 Jy/beam ! Clean residual mean=-0.000000 rms=0.000752 Jy/beam ! Combined flux in latest and established models = 0.0555954 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 50 components and 0.0555954 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.076727Jy sigma=1.219523 ! Fit after self-cal, rms=0.076728Jy sigma=1.216517 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.076728Jy sigma=1.216517 ! Fit after self-cal, rms=0.073526Jy sigma=1.209615 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.32 mas, bmaj=16.71 mas, bpa=-18.49 degrees ! Estimated noise=0.541463 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000545463 Jy ! Component: 100 - total flux cleaned = 0.000853457 Jy ! Component: 150 - total flux cleaned = 0.000911575 Jy ! Component: 200 - total flux cleaned = 0.000912058 Jy ! Total flux subtracted in 200 components = 0.000912058 Jy ! Clean residual min=-0.002385 max=0.002436 Jy/beam ! Clean residual mean=0.000001 rms=0.000608 Jy/beam ! Combined flux in latest and established models = 0.0565075 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 69 components and 0.0565074 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.073491Jy sigma=1.209090 ! Fit after self-cal, rms=0.073529Jy sigma=1.206473 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000281669 Jy ! Component: 100 - total flux cleaned = 0.000247894 Jy ! Component: 150 - total flux cleaned = 0.000218765 Jy ! Component: 200 - total flux cleaned = 0.000167388 Jy ! Total flux subtracted in 200 components = 0.000167388 Jy ! Clean residual min=-0.002383 max=0.002548 Jy/beam ! Clean residual mean=0.000002 rms=0.000617 Jy/beam ! Combined flux in latest and established models = 0.0566748 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 79 components and 0.0566748 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.073498Jy sigma=1.206034 ! Fit after self-cal, rms=0.073488Jy sigma=1.205956 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.073488Jy sigma=1.205956 ! Fit after self-cal, rms=0.073477Jy sigma=1.205048 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.321 mas, bmaj=16.63 mas, bpa=-18.51 degrees ! Estimated noise=0.541485 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000554383 Jy ! Component: 100 - total flux cleaned = 0.000674467 Jy ! Component: 150 - total flux cleaned = 0.000727642 Jy ! Component: 200 - total flux cleaned = 0.000752077 Jy ! Total flux subtracted in 200 components = 0.000752077 Jy ! Clean residual min=-0.002355 max=0.002433 Jy/beam ! Clean residual mean=0.000001 rms=0.000585 Jy/beam ! Combined flux in latest and established models = 0.0574269 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 91 components and 0.0574269 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.073450Jy sigma=1.204709 ! Fit after self-cal, rms=0.073510Jy sigma=1.204185 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000127091 Jy ! Component: 100 - total flux cleaned = 0.000102617 Jy ! Component: 150 - total flux cleaned = 7.89511e-05 Jy ! Component: 200 - total flux cleaned = 5.67707e-05 Jy ! Total flux subtracted in 200 components = 5.67707e-05 Jy ! Clean residual min=-0.002359 max=0.002411 Jy/beam ! Clean residual mean=0.000002 rms=0.000587 Jy/beam ! Combined flux in latest and established models = 0.0574837 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 106 components and 0.0574837 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.073487Jy sigma=1.203910 ! Fit after self-cal, rms=0.073480Jy sigma=1.203852 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.073480Jy sigma=1.203852 ! Fit after self-cal, rms=0.073602Jy sigma=1.203654 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.598 mas, bmaj=17.95 mas, bpa=-15.59 degrees ! Estimated noise=0.661634 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00028321 Jy ! Component: 100 - total flux cleaned = 0.00027731 Jy ! Component: 150 - total flux cleaned = 0.000322426 Jy ! Component: 200 - total flux cleaned = 0.000322548 Jy ! Total flux subtracted in 200 components = 0.000322548 Jy ! Clean residual min=-0.002136 max=0.002015 Jy/beam ! Clean residual mean=0.000003 rms=0.000606 Jy/beam ! Combined flux in latest and established models = 0.0578062 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 116 components and 0.0578062 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.073586Jy sigma=1.203469 ! Fit after self-cal, rms=0.073617Jy sigma=1.203275 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.33118e-05 Jy ! Component: 100 - total flux cleaned = 3.73086e-05 Jy ! Component: 150 - total flux cleaned = 5.44617e-05 Jy ! Component: 200 - total flux cleaned = 5.43824e-05 Jy ! Total flux subtracted in 200 components = 5.43824e-05 Jy ! Clean residual min=-0.002091 max=0.002011 Jy/beam ! Clean residual mean=0.000003 rms=0.000600 Jy/beam ! Combined flux in latest and established models = 0.0578606 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 125 components and 0.0578606 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.073605Jy sigma=1.203168 ! Fit after self-cal, rms=0.073583Jy sigma=1.203020 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.322 mas, bmaj=16.58 mas, bpa=-18.52 degrees ! Estimated noise=0.542595 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.322 x 16.58 at -18.52 degrees (North through East) ! Clean map min=-0.0031393 max=0.052531 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.64 mas, bmaj=16.38 mas, bpa=-18.5 degrees ! Estimated noise=0.725661 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0396916 Jy ! Component: 100 - total flux cleaned = 0.0489146 Jy ! Component: 150 - total flux cleaned = 0.0524703 Jy ! Component: 200 - total flux cleaned = 0.0549887 Jy ! Total flux subtracted in 200 components = 0.0549887 Jy ! Clean residual min=-0.003709 max=0.003320 Jy/beam ! Clean residual mean=0.000001 rms=0.000922 Jy/beam ! Combined flux in latest and established models = 0.0549887 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.0549887 Jy ! Inverting map and beam ! Estimated beam: bmin=3.322 mas, bmaj=16.58 mas, bpa=-18.52 degrees ! Estimated noise=0.542595 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00179696 Jy ! Component: 100 - total flux cleaned = 0.00255579 Jy ! Component: 150 - total flux cleaned = 0.00315569 Jy ! Component: 200 - total flux cleaned = 0.00359001 Jy ! Total flux subtracted in 200 components = 0.00359001 Jy ! Clean residual min=-0.002599 max=0.002415 Jy/beam ! Clean residual mean=0.000002 rms=0.000664 Jy/beam ! Combined flux in latest and established models = 0.0585787 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 41 components and 0.0585787 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.598 mas, bmaj=17.95 mas, bpa=-15.59 degrees ! Estimated noise=0.661634 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.37749e-05 Jy ! Component: 100 - total flux cleaned = -0.000141309 Jy ! Component: 150 - total flux cleaned = -0.0002174 Jy ! Component: 200 - total flux cleaned = -0.000216094 Jy ! Total flux subtracted in 200 components = -0.000216094 Jy ! Clean residual min=-0.002259 max=0.002134 Jy/beam ! Clean residual mean=0.000003 rms=0.000643 Jy/beam ! Combined flux in latest and established models = 0.0583626 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.58863e-05 Jy ! Component: 100 - total flux cleaned = -5.0241e-05 Jy ! Component: 150 - total flux cleaned = -5.13986e-05 Jy ! Component: 200 - total flux cleaned = -7.40186e-05 Jy ! Total flux subtracted in 200 components = -7.40186e-05 Jy ! Clean residual min=-0.002150 max=0.002140 Jy/beam ! Clean residual mean=0.000003 rms=0.000627 Jy/beam ! Combined flux in latest and established models = 0.0582886 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 73 components and 0.0582886 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.322 mas, bmaj=16.58 mas, bpa=-18.52 degrees ! Estimated noise=0.542595 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.60194e-05 Jy ! Component: 100 - total flux cleaned = -7.97491e-05 Jy ! Component: 150 - total flux cleaned = -7.94848e-05 Jy ! Component: 200 - total flux cleaned = -0.000106212 Jy ! Total flux subtracted in 200 components = -0.000106212 Jy ! Clean residual min=-0.002365 max=0.002334 Jy/beam ! Clean residual mean=0.000002 rms=0.000599 Jy/beam ! Combined flux in latest and established models = 0.0581823 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 89 components and 0.0581824 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.073589Jy sigma=1.203316 ! Fit after self-cal, rms=0.073511Jy sigma=1.202821 wmodel J2123-0519_S_b_map.mod ! Writing 89 model components to file: J2123-0519_S_b_map.mod wobs J2123-0519_S_b_uvs.fits ! Writing UV FITS file: J2123-0519_S_b_uvs.fits wwins J2123-0519_S_b_map.win ! wwins: Wrote 1 windows to J2123-0519_S_b_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00043609 Jy ! Component: 100 - total flux cleaned = -0.000747491 Jy ! Component: 150 - total flux cleaned = -0.000927958 Jy ! Component: 200 - total flux cleaned = -0.00113227 Jy ! Component: 250 - total flux cleaned = -0.0013248 Jy ! Component: 300 - total flux cleaned = -0.00156823 Jy ! Component: 350 - total flux cleaned = -0.00171354 Jy ! Component: 400 - total flux cleaned = -0.00185302 Jy ! Component: 450 - total flux cleaned = -0.00204073 Jy ! Component: 500 - total flux cleaned = -0.0021949 Jy ! Component: 550 - total flux cleaned = -0.00234459 Jy ! Component: 600 - total flux cleaned = -0.00246484 Jy ! Component: 650 - total flux cleaned = -0.00251137 Jy ! Component: 700 - total flux cleaned = -0.00257842 Jy ! Component: 750 - total flux cleaned = -0.00257798 Jy ! Component: 800 - total flux cleaned = -0.00257778 Jy ! Component: 850 - total flux cleaned = -0.00263988 Jy ! Component: 900 - total flux cleaned = -0.00265967 Jy ! Component: 950 - total flux cleaned = -0.00263977 Jy ! Component: 1000 - total flux cleaned = -0.00269794 Jy ! Component: 1050 - total flux cleaned = -0.00273563 Jy ! Component: 1100 - total flux cleaned = -0.00273592 Jy ! Component: 1150 - total flux cleaned = -0.00278998 Jy ! Component: 1200 - total flux cleaned = -0.00284324 Jy ! Component: 1250 - total flux cleaned = -0.00287806 Jy ! Component: 1300 - total flux cleaned = -0.00292869 Jy ! Component: 1350 - total flux cleaned = -0.0029784 Jy ! Component: 1400 - total flux cleaned = -0.00297804 Jy ! Component: 1450 - total flux cleaned = -0.00299387 Jy ! Component: 1500 - total flux cleaned = -0.00300908 Jy ! Component: 1550 - total flux cleaned = -0.00297815 Jy ! Component: 1600 - total flux cleaned = -0.00296343 Jy ! Component: 1650 - total flux cleaned = -0.00297891 Jy ! Component: 1700 - total flux cleaned = -0.00299376 Jy ! Component: 1750 - total flux cleaned = -0.00299371 Jy ! Component: 1800 - total flux cleaned = -0.00297936 Jy ! Component: 1850 - total flux cleaned = -0.00295104 Jy ! Component: 1900 - total flux cleaned = -0.00290949 Jy ! Component: 1950 - total flux cleaned = -0.00293664 Jy ! Component: 2000 - total flux cleaned = -0.00295025 Jy ! Component: 2050 - total flux cleaned = -0.00297673 Jy ! Component: 2100 - total flux cleaned = -0.0030032 Jy ! Component: 2150 - total flux cleaned = -0.00305507 Jy ! Component: 2200 - total flux cleaned = -0.00304188 Jy ! Component: 2250 - total flux cleaned = -0.00307988 Jy ! Component: 2300 - total flux cleaned = -0.00304211 Jy ! Component: 2350 - total flux cleaned = -0.0030918 Jy ! Component: 2400 - total flux cleaned = -0.0031163 Jy ! Component: 2450 - total flux cleaned = -0.0031649 Jy ! Component: 2500 - total flux cleaned = -0.00311661 Jy ! Component: 2550 - total flux cleaned = -0.00318816 Jy ! Component: 2600 - total flux cleaned = -0.00322353 Jy ! Component: 2650 - total flux cleaned = -0.00325849 Jy ! Component: 2700 - total flux cleaned = -0.00329328 Jy ! Component: 2750 - total flux cleaned = -0.00333904 Jy ! Component: 2800 - total flux cleaned = -0.00339601 Jy ! Component: 2850 - total flux cleaned = -0.00344117 Jy ! Component: 2900 - total flux cleaned = -0.00342999 Jy ! Component: 2950 - total flux cleaned = -0.00348552 Jy ! Component: 3000 - total flux cleaned = -0.00351845 Jy ! Component: 3050 - total flux cleaned = -0.00349671 Jy ! Component: 3100 - total flux cleaned = -0.00350759 Jy ! Component: 3150 - total flux cleaned = -0.00351824 Jy ! Component: 3200 - total flux cleaned = -0.0035182 Jy ! Component: 3250 - total flux cleaned = -0.00351823 Jy ! Component: 3300 - total flux cleaned = -0.00348687 Jy ! Component: 3350 - total flux cleaned = -0.0034557 Jy ! Component: 3400 - total flux cleaned = -0.00348669 Jy ! Component: 3450 - total flux cleaned = -0.00348673 Jy ! Component: 3500 - total flux cleaned = -0.00346629 Jy ! Component: 3550 - total flux cleaned = -0.00342588 Jy ! Component: 3600 - total flux cleaned = -0.00339585 Jy ! Component: 3650 - total flux cleaned = -0.00337598 Jy ! Component: 3700 - total flux cleaned = -0.00334619 Jy ! Component: 3750 - total flux cleaned = -0.00332662 Jy ! Component: 3800 - total flux cleaned = -0.00329742 Jy ! Component: 3850 - total flux cleaned = -0.00331683 Jy ! Component: 3900 - total flux cleaned = -0.00329752 Jy ! Component: 3950 - total flux cleaned = -0.00326878 Jy ! Component: 4000 - total flux cleaned = -0.00323065 Jy ! Component: 4050 - total flux cleaned = -0.0032589 Jy ! Total flux subtracted in 4096 components = -0.00317429 Jy ! Clean residual min=-0.000535 max=0.000676 Jy/beam ! Clean residual mean=-0.000001 rms=0.000173 Jy/beam ! Combined flux in latest and established models = 0.0550081 Jy keep ! Adding 291 model components to the UV plane model. ! The established model now contains 380 components and 0.0550081 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J2123-0519_S_b_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.322 x 16.58 at -18.52 degrees (North through East) ! Clean map min=-0.002741 max=0.052237 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J2123-0519_S_b_map.fits wmodel /vlbi/uf001/uva//J2123-0519_S_b_map.mod ! Writing 380 model components to file: /vlbi/uf001/uva//J2123-0519_S_b_map.mod wobs /vlbi/uf001/uva//J2123-0519_S_b_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J2123-0519_S_b_uvs.fits wwins /vlbi/uf001/uva//J2123-0519_S_b_map.win ! wwins: Wrote 2 windows to /vlbi/uf001/uva//J2123-0519_S_b_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0522368 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000172924 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.993117 0.993117 1.98623 3.97247 7.94494 15.8899 31.7798 63.5595 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.052 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 302.079 quit ! Quitting program ! Log file /vlbi/uf001/uva//J2123-0519_S_b_dfm.log closed on Mon Jan 14 05:51:04 2019