! Started logfile: /vlbi/uf001/uva//J2121-3703_S_dfm.log on Mon Jan 14 05:50:07 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J2121-3703_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J2121-3703_S_uva.fits
! AN table 1: 24 integrations on 28 of 28 possible baselines.
! AN table 2: 24 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.982422 visibilities/baseline/integration-bin.
! Found source: J2121-3703
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 4527 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J2121-3703_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 1 telescope corrections were flagged in sub-array 1.
!  A total of 2 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 1 telescope corrections were flagged in sub-array 1.
!  A total of 2 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 1 telescope corrections were flagged in sub-array 1.
!  A total of 2 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.069168Jy  sigma=14.525700
! Fit after  self-cal, rms=0.721042Jy  sigma=9.619923
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.523 mas, bmaj=8.324 mas, bpa=3.839 degrees
! Estimated noise=1.33815 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.214167 Jy
! Component: 100  -  total flux cleaned = 0.273145 Jy
! Total flux subtracted in 100 components = 0.273145 Jy
! Clean residual min=-0.015440 max=0.030558 Jy/beam
! Clean residual mean=-0.000083 rms=0.004939 Jy/beam
! Combined flux in latest and established models = 0.273145 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.273145 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.109609Jy  sigma=1.462974
! Fit after  self-cal, rms=0.109566Jy  sigma=1.462187
! Inverting map 
! Added new window around map position (2.5, 11).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.031194 Jy
! Component: 100  -  total flux cleaned = 0.0489172 Jy
! Total flux subtracted in 100 components = 0.0489172 Jy
! Clean residual min=-0.012472 max=0.016447 Jy/beam
! Clean residual mean=-0.000052 rms=0.003461 Jy/beam
! Combined flux in latest and established models = 0.322062 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 33 components and 0.322062 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.100276Jy  sigma=1.294063
! Fit after  self-cal, rms=0.100146Jy  sigma=1.291565
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.256 mas, bmaj=9.856 mas, bpa=3.23 degrees
! Estimated noise=0.787821 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0142501 Jy
! Component: 100  -  total flux cleaned = 0.0217001 Jy
! Component: 150  -  total flux cleaned = 0.0230405 Jy
! Component: 200  -  total flux cleaned = 0.0240925 Jy
! Total flux subtracted in 200 components = 0.0240925 Jy
! Clean residual min=-0.009301 max=0.014090 Jy/beam
! Clean residual mean=-0.000120 rms=0.002965 Jy/beam
! Combined flux in latest and established models = 0.346155 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 52 components and 0.346155 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.098653Jy  sigma=1.255279
! Fit after  self-cal, rms=0.098605Jy  sigma=1.254420
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.256 x 9.856 at 3.23 degrees (North through East)
! Clean map  min=-0.009287  max=0.27174 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.91     HN        1.25     KP        0.99     LA        0.93     
!   NL        0.99     OV        0.96     PT        0.97     SC        0.99     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.09     FD        0.93     KP        0.99     LA        0.92     
!   MK        0.93     NL        1.31     OV        0.98     PT        0.97     
!   SC        0.98     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.91     HN        1.31     KP        0.99     LA        0.92     
!   NL        1.04     OV        0.97     PT        0.99     SC        0.98     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.04     FD        0.92     KP        1.02     LA        0.94     
!   MK        0.99     NL        1.36     OV        0.97     PT        1.01     
!   SC        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.91     HN        1.26     KP        0.99     LA        0.94     
!   NL        1.00     OV        0.98     PT        1.01     SC        1.00     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.10     FD        0.94     KP        1.03     LA        0.93     
!   MK        0.97     NL        1.33     OV        1.01     PT        1.00     
!   SC        0.99     
! 
! 
! Fit before self-cal, rms=0.098605Jy  sigma=1.254420
! Fit after  self-cal, rms=0.099249Jy  sigma=1.163958
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.253 mas, bmaj=9.893 mas, bpa=3.339 degrees
! Estimated noise=0.788028 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00274541 Jy
! Component: 100  -  total flux cleaned = -0.0027517 Jy
! Component: 150  -  total flux cleaned = -0.00276006 Jy
! Component: 200  -  total flux cleaned = -0.00275744 Jy
! Total flux subtracted in 200 components = -0.00275744 Jy
! Clean residual min=-0.003531 max=0.003827 Jy/beam
! Clean residual mean=-0.000004 rms=0.001009 Jy/beam
! Combined flux in latest and established models = 0.343397 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 66 components and 0.343397 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.099014Jy  sigma=1.161766
! Fit after  self-cal, rms=0.099211Jy  sigma=1.161124
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.099211Jy  sigma=1.161124
! Fit after  self-cal, rms=0.099565Jy  sigma=1.160653
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.253 mas, bmaj=9.891 mas, bpa=3.301 degrees
! Estimated noise=0.787139 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00199978 Jy
! Component: 100  -  total flux cleaned = -0.0020083 Jy
! Component: 150  -  total flux cleaned = -0.00194944 Jy
! Component: 200  -  total flux cleaned = -0.00189708 Jy
! Total flux subtracted in 200 components = -0.00189708 Jy
! Clean residual min=-0.003208 max=0.003630 Jy/beam
! Clean residual mean=-0.000003 rms=0.000939 Jy/beam
! Combined flux in latest and established models = 0.3415 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 75 components and 0.3415 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.099436Jy  sigma=1.159544
! Fit after  self-cal, rms=0.099413Jy  sigma=1.159419
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00029715 Jy
! Component: 100  -  total flux cleaned = -0.000205738 Jy
! Component: 150  -  total flux cleaned = -0.000202514 Jy
! Component: 200  -  total flux cleaned = -0.000166269 Jy
! Total flux subtracted in 200 components = -0.000166269 Jy
! Clean residual min=-0.003183 max=0.003545 Jy/beam
! Clean residual mean=-0.000003 rms=0.000917 Jy/beam
! Combined flux in latest and established models = 0.341334 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 81 components and 0.341334 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.099367Jy  sigma=1.159016
! Fit after  self-cal, rms=0.099357Jy  sigma=1.158977
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.099357Jy  sigma=1.158977
! Fit after  self-cal, rms=0.099773Jy  sigma=1.158522
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.249 mas, bmaj=9.878 mas, bpa=3.284 degrees
! Estimated noise=0.786374 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00132731 Jy
! Component: 100  -  total flux cleaned = -0.0011823 Jy
! Component: 150  -  total flux cleaned = -0.0011392 Jy
! Component: 200  -  total flux cleaned = -0.00113927 Jy
! Total flux subtracted in 200 components = -0.00113927 Jy
! Clean residual min=-0.003163 max=0.003466 Jy/beam
! Clean residual mean=-0.000002 rms=0.000875 Jy/beam
! Combined flux in latest and established models = 0.340195 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 83 components and 0.340195 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.099703Jy  sigma=1.157991
! Fit after  self-cal, rms=0.099698Jy  sigma=1.157936
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000152727 Jy
! Component: 100  -  total flux cleaned = -0.000120712 Jy
! Component: 150  -  total flux cleaned = -9.27685e-05 Jy
! Component: 200  -  total flux cleaned = -9.46449e-05 Jy
! Total flux subtracted in 200 components = -9.46449e-05 Jy
! Clean residual min=-0.003125 max=0.003432 Jy/beam
! Clean residual mean=-0.000002 rms=0.000863 Jy/beam
! Combined flux in latest and established models = 0.3401 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 85 components and 0.3401 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.099672Jy  sigma=1.157721
! Fit after  self-cal, rms=0.099666Jy  sigma=1.157698
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.099666Jy  sigma=1.157698
! Fit after  self-cal, rms=0.099948Jy  sigma=1.157430
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.26 mas, bmaj=24.36 mas, bpa=0.7985 degrees
! Estimated noise=0.976009 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000572771 Jy
! Component: 100  -  total flux cleaned = -0.000538714 Jy
! Component: 150  -  total flux cleaned = -0.000474688 Jy
! Component: 200  -  total flux cleaned = -0.000417083 Jy
! Total flux subtracted in 200 components = -0.000417083 Jy
! Clean residual min=-0.003177 max=0.003803 Jy/beam
! Clean residual mean=0.000001 rms=0.000965 Jy/beam
! Combined flux in latest and established models = 0.339683 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 90 components and 0.339683 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.099918Jy  sigma=1.157284
! Fit after  self-cal, rms=0.099913Jy  sigma=1.157203
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.37681e-05 Jy
! Component: 100  -  total flux cleaned = -3.81501e-05 Jy
! Component: 150  -  total flux cleaned = 1.10726e-05 Jy
! Component: 200  -  total flux cleaned = 5.6782e-05 Jy
! Total flux subtracted in 200 components = 5.6782e-05 Jy
! Clean residual min=-0.003118 max=0.003785 Jy/beam
! Clean residual mean=0.000001 rms=0.000955 Jy/beam
! Combined flux in latest and established models = 0.33974 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 93 components and 0.33974 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.099902Jy  sigma=1.157273
! Fit after  self-cal, rms=0.099894Jy  sigma=1.157224
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.244 mas, bmaj=9.865 mas, bpa=3.271 degrees
! Estimated noise=0.785369 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.244 x 9.865 at 3.271 degrees (North through East)
! Clean map  min=-0.0028891  max=0.27633 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.514 mas, bmaj=8.367 mas, bpa=4.162 degrees
! Estimated noise=1.33088 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.212965 Jy
! Component: 100  -  total flux cleaned = 0.27158 Jy
! Component: 150  -  total flux cleaned = 0.298537 Jy
! Component: 200  -  total flux cleaned = 0.314079 Jy
! Total flux subtracted in 200 components = 0.314079 Jy
! Clean residual min=-0.006247 max=0.008420 Jy/beam
! Clean residual mean=-0.000013 rms=0.001828 Jy/beam
! Combined flux in latest and established models = 0.314079 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 40 model components to the UV plane model.
! The established model now contains 40 components and 0.314079 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.244 mas, bmaj=9.865 mas, bpa=3.271 degrees
! Estimated noise=0.785369 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.012125 Jy
! Component: 100  -  total flux cleaned = 0.018205 Jy
! Component: 150  -  total flux cleaned = 0.0214375 Jy
! Component: 200  -  total flux cleaned = 0.0227386 Jy
! Total flux subtracted in 200 components = 0.0227386 Jy
! Clean residual min=-0.003280 max=0.003526 Jy/beam
! Clean residual mean=-0.000009 rms=0.000873 Jy/beam
! Combined flux in latest and established models = 0.336817 Jy
! Adding 42 model components to the UV plane model.
! The established model now contains 70 components and 0.336817 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.26 mas, bmaj=24.36 mas, bpa=0.7985 degrees
! Estimated noise=0.976009 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00173999 Jy
! Component: 100  -  total flux cleaned = 0.00180923 Jy
! Component: 150  -  total flux cleaned = 0.00183751 Jy
! Component: 200  -  total flux cleaned = 0.0018903 Jy
! Total flux subtracted in 200 components = 0.0018903 Jy
! Clean residual min=-0.003178 max=0.003604 Jy/beam
! Clean residual mean=-0.000004 rms=0.000955 Jy/beam
! Combined flux in latest and established models = 0.338708 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.51568e-05 Jy
! Component: 100  -  total flux cleaned = 4.91521e-05 Jy
! Component: 150  -  total flux cleaned = 7.33222e-05 Jy
! Component: 200  -  total flux cleaned = 0.000119161 Jy
! Total flux subtracted in 200 components = 0.000119161 Jy
! Clean residual min=-0.003155 max=0.003613 Jy/beam
! Clean residual mean=-0.000003 rms=0.000950 Jy/beam
! Combined flux in latest and established models = 0.338827 Jy
! Adding 14 model components to the UV plane model.
! The established model now contains 83 components and 0.338827 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.244 mas, bmaj=9.865 mas, bpa=3.271 degrees
! Estimated noise=0.785369 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000510656 Jy
! Component: 100  -  total flux cleaned = -0.000598731 Jy
! Component: 150  -  total flux cleaned = -0.000637079 Jy
! Component: 200  -  total flux cleaned = -0.000667929 Jy
! Total flux subtracted in 200 components = -0.000667929 Jy
! Clean residual min=-0.003010 max=0.003273 Jy/beam
! Clean residual mean=-0.000005 rms=0.000838 Jy/beam
! Combined flux in latest and established models = 0.338159 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 93 components and 0.338159 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.099915Jy  sigma=1.157106
! Fit after  self-cal, rms=0.099908Jy  sigma=1.157050
wmodel J2121-3703_S_map.mod
! Writing 93 model components to file: J2121-3703_S_map.mod
wobs   J2121-3703_S_uvs.fits
! Writing UV FITS file: J2121-3703_S_uvs.fits
wwins  J2121-3703_S_map.win
! wwins: Wrote 2 windows to J2121-3703_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000936897 Jy
! Component: 100  -  total flux cleaned = 0.0019254 Jy
! Component: 150  -  total flux cleaned = 0.00251853 Jy
! Component: 200  -  total flux cleaned = 0.00294312 Jy
! Component: 250  -  total flux cleaned = 0.00316795 Jy
! Component: 300  -  total flux cleaned = 0.00342933 Jy
! Component: 350  -  total flux cleaned = 0.00347143 Jy
! Component: 400  -  total flux cleaned = 0.0036372 Jy
! Component: 450  -  total flux cleaned = 0.00383976 Jy
! Component: 500  -  total flux cleaned = 0.00415483 Jy
! Component: 550  -  total flux cleaned = 0.00442407 Jy
! Component: 600  -  total flux cleaned = 0.00483569 Jy
! Component: 650  -  total flux cleaned = 0.00490847 Jy
! Component: 700  -  total flux cleaned = 0.00505282 Jy
! Component: 750  -  total flux cleaned = 0.00536847 Jy
! Component: 800  -  total flux cleaned = 0.00547146 Jy
! Component: 850  -  total flux cleaned = 0.0056398 Jy
! Component: 900  -  total flux cleaned = 0.00573831 Jy
! Component: 950  -  total flux cleaned = 0.00583582 Jy
! Component: 1000  -  total flux cleaned = 0.00593115 Jy
! Component: 1050  -  total flux cleaned = 0.00589935 Jy
! Component: 1100  -  total flux cleaned = 0.00589907 Jy
! Component: 1150  -  total flux cleaned = 0.00589885 Jy
! Component: 1200  -  total flux cleaned = 0.00586834 Jy
! Component: 1250  -  total flux cleaned = 0.00589799 Jy
! Component: 1300  -  total flux cleaned = 0.0058684 Jy
! Component: 1350  -  total flux cleaned = 0.0057254 Jy
! Component: 1400  -  total flux cleaned = 0.00581022 Jy
! Component: 1450  -  total flux cleaned = 0.00575422 Jy
! Component: 1500  -  total flux cleaned = 0.00567155 Jy
! Component: 1550  -  total flux cleaned = 0.00564421 Jy
! Component: 1600  -  total flux cleaned = 0.0055905 Jy
! Component: 1650  -  total flux cleaned = 0.00553745 Jy
! Component: 1700  -  total flux cleaned = 0.00545969 Jy
! Component: 1750  -  total flux cleaned = 0.00556233 Jy
! Component: 1800  -  total flux cleaned = 0.00548599 Jy
! Component: 1850  -  total flux cleaned = 0.00541045 Jy
! Component: 1900  -  total flux cleaned = 0.00531157 Jy
! Component: 1950  -  total flux cleaned = 0.00533597 Jy
! Component: 2000  -  total flux cleaned = 0.00523959 Jy
! Component: 2050  -  total flux cleaned = 0.00523951 Jy
! Component: 2100  -  total flux cleaned = 0.0051924 Jy
! Component: 2150  -  total flux cleaned = 0.00507565 Jy
! Component: 2200  -  total flux cleaned = 0.00500658 Jy
! Component: 2250  -  total flux cleaned = 0.00487054 Jy
! Component: 2300  -  total flux cleaned = 0.00484854 Jy
! Component: 2350  -  total flux cleaned = 0.00480414 Jy
! Component: 2400  -  total flux cleaned = 0.00469437 Jy
! Component: 2450  -  total flux cleaned = 0.00465117 Jy
! Component: 2500  -  total flux cleaned = 0.00462965 Jy
! Component: 2550  -  total flux cleaned = 0.00460845 Jy
! Component: 2600  -  total flux cleaned = 0.00452402 Jy
! Component: 2650  -  total flux cleaned = 0.00441957 Jy
! Component: 2700  -  total flux cleaned = 0.00439907 Jy
! Component: 2750  -  total flux cleaned = 0.00425645 Jy
! Component: 2800  -  total flux cleaned = 0.00427697 Jy
! Component: 2850  -  total flux cleaned = 0.00423694 Jy
! Component: 2900  -  total flux cleaned = 0.00421722 Jy
! Component: 2950  -  total flux cleaned = 0.00421695 Jy
! Component: 3000  -  total flux cleaned = 0.00419739 Jy
! Component: 3050  -  total flux cleaned = 0.00413956 Jy
! Component: 3100  -  total flux cleaned = 0.00413949 Jy
! Component: 3150  -  total flux cleaned = 0.00408293 Jy
! Component: 3200  -  total flux cleaned = 0.00398973 Jy
! Component: 3250  -  total flux cleaned = 0.00400833 Jy
! Component: 3300  -  total flux cleaned = 0.00397164 Jy
! Component: 3350  -  total flux cleaned = 0.00400796 Jy
! Component: 3400  -  total flux cleaned = 0.00390003 Jy
! Component: 3450  -  total flux cleaned = 0.00388225 Jy
! Component: 3500  -  total flux cleaned = 0.00379366 Jy
! Component: 3550  -  total flux cleaned = 0.00379377 Jy
! Component: 3600  -  total flux cleaned = 0.00375917 Jy
! Component: 3650  -  total flux cleaned = 0.00369021 Jy
! Component: 3700  -  total flux cleaned = 0.0036561 Jy
! Component: 3750  -  total flux cleaned = 0.00362226 Jy
! Component: 3800  -  total flux cleaned = 0.0036055 Jy
! Component: 3850  -  total flux cleaned = 0.00355558 Jy
! Component: 3900  -  total flux cleaned = 0.00352249 Jy
! Component: 3950  -  total flux cleaned = 0.00352255 Jy
! Component: 4000  -  total flux cleaned = 0.00348977 Jy
! Component: 4050  -  total flux cleaned = 0.00345744 Jy
! Total flux subtracted in 4096 components = 0.00342527 Jy
! Clean residual min=-0.000907 max=0.001210 Jy/beam
! Clean residual mean=-0.000004 rms=0.000299 Jy/beam
! Combined flux in latest and established models = 0.341584 Jy
keep
! Adding 297 model components to the UV plane model.
! The established model now contains 390 components and 0.341584 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J2121-3703_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.244 x 9.865 at 3.271 degrees (North through East)
! Clean map  min=-0.002195  max=0.27915 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J2121-3703_S_map.fits
wmodel /vlbi/uf001/uva//J2121-3703_S_map.mod
! Writing 390 model components to file: /vlbi/uf001/uva//J2121-3703_S_map.mod
wobs   /vlbi/uf001/uva//J2121-3703_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J2121-3703_S_uvs.fits
wwins  /vlbi/uf001/uva//J2121-3703_S_map.win
! wwins: Wrote 3 windows to /vlbi/uf001/uva//J2121-3703_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.279152 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000300777 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.323241 0.323241 0.646481 1.29296 2.58592 5.17185 10.3437 20.6874 41.3748 82.7496
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0009 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.279 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  928.101 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J2121-3703_S_dfm.log closed on Mon Jan 14 05:50:12 2019