! Started logfile: /vlbi/uf001/uva//J2118-3019_X_dfm.log on Mon Jan 14 05:48:42 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uva//J2118-3019_X_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J2118-3019_X_uva.fits ! AN table 1: 37 integrations on 36 of 36 possible baselines. ! AN table 2: 36 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.996956 visibilities/baseline/integration-bin. ! Found source: J2118-3019 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 31440 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J2118-3019_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.006091Jy sigma=19.989679 ! Fit after self-cal, rms=0.945633Jy sigma=18.754786 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6488 mas, bmaj=2.021 mas, bpa=5.694 degrees ! Estimated noise=0.477742 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0391773 Jy ! Component: 100 - total flux cleaned = 0.0493035 Jy ! Total flux subtracted in 100 components = 0.0493035 Jy ! Clean residual min=-0.005391 max=0.015544 Jy/beam ! Clean residual mean=-0.000008 rms=0.001528 Jy/beam ! Combined flux in latest and established models = 0.0493035 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.0493035 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074131Jy sigma=1.418748 ! Fit after self-cal, rms=0.072831Jy sigma=1.392154 ! Inverting map ! Added new window around map position (2.4, -2.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.013851 Jy ! Component: 100 - total flux cleaned = 0.0204995 Jy ! Total flux subtracted in 100 components = 0.0204995 Jy ! Clean residual min=-0.004114 max=0.009198 Jy/beam ! Clean residual mean=-0.000009 rms=0.001146 Jy/beam ! Combined flux in latest and established models = 0.069803 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 18 components and 0.069803 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068900Jy sigma=1.305284 ! Fit after self-cal, rms=0.067811Jy sigma=1.282974 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00860764 Jy ! Component: 100 - total flux cleaned = 0.0135868 Jy ! Total flux subtracted in 100 components = 0.0135868 Jy ! Clean residual min=-0.003461 max=0.006110 Jy/beam ! Clean residual mean=-0.000007 rms=0.000916 Jy/beam ! Combined flux in latest and established models = 0.0833898 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 34 components and 0.0833898 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065873Jy sigma=1.238224 ! Fit after self-cal, rms=0.065592Jy sigma=1.232588 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8978 mas, bmaj=2.595 mas, bpa=4.32 degrees ! Estimated noise=0.205084 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00934737 Jy ! Component: 100 - total flux cleaned = 0.0146916 Jy ! Component: 150 - total flux cleaned = 0.0183068 Jy ! Component: 200 - total flux cleaned = 0.0208313 Jy ! Total flux subtracted in 200 components = 0.0208313 Jy ! Clean residual min=-0.002665 max=0.004404 Jy/beam ! Clean residual mean=-0.000005 rms=0.000712 Jy/beam ! Combined flux in latest and established models = 0.104221 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 60 components and 0.104221 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064267Jy sigma=1.200438 ! Fit after self-cal, rms=0.064118Jy sigma=1.196662 ! Inverting map ! Added new window around map position (3.6, -3.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00388778 Jy ! Component: 100 - total flux cleaned = 0.00596872 Jy ! Component: 150 - total flux cleaned = 0.0072738 Jy ! Component: 200 - total flux cleaned = 0.00808262 Jy ! Total flux subtracted in 200 components = 0.00808262 Jy ! Clean residual min=-0.002014 max=0.002916 Jy/beam ! Clean residual mean=-0.000005 rms=0.000568 Jy/beam ! Combined flux in latest and established models = 0.112304 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 84 components and 0.112304 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063892Jy sigma=1.191543 ! Fit after self-cal, rms=0.063831Jy sigma=1.190056 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8978 x 2.595 at 4.32 degrees (North through East) ! Clean map min=-0.0019067 max=0.049724 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.20 FD 0.94 HN 1.02 KP 0.92 ! LA 1.01 NL 1.19 OV 0.87 PT 1.00 ! SC 0.85 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.15 FD 0.94 KP 0.89 LA 0.99 ! MK 1.05 NL 1.29 OV 0.95 PT 0.98 ! SC 1.05 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.20 FD 0.97 HN 1.17 KP 0.99 ! LA 0.95 NL 1.08 OV 0.95 PT 0.98 ! SC 0.82 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.10 FD 0.96 KP 0.95 LA 1.02 ! MK 0.99 NL 1.28 OV 0.88 PT 0.97 ! SC 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 0.98 HN 1.09 KP 0.98 ! LA 0.94 NL 1.04 OV 0.88 PT 0.98 ! SC 0.88 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.12 FD 0.94 KP 0.97 LA 0.96 ! MK 0.98 NL 1.30 OV 0.94 PT 1.05 ! SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.25 FD 1.08 HN 1.14 KP 1.01 ! LA 0.94 NL 1.07 OV 0.87 PT 0.99 ! SC 0.80 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.15 FD 0.98 KP 1.04 LA 0.98 ! MK 0.99 NL 1.14 OV 0.83 PT 0.94 ! SC 0.98 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.20 FD 0.95 HN 1.00 KP 1.00 ! LA 0.95 NL 1.15 OV 0.97 PT 0.96 ! SC 0.89 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.11 FD 0.98 KP 0.94 LA 1.04 ! MK 1.04 NL 1.39 OV 0.94 PT 0.96 ! SC 0.98 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.28 FD 0.96 HN 0.98 KP 0.95 ! LA 0.96 NL 1.07 OV 0.92 PT 0.97 ! SC 0.82 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.05 FD 0.95 KP 0.93 LA 0.90 ! MK 1.09 NL 1.30 OV 0.94 PT 1.00 ! SC 1.00 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.22 FD 1.00 HN 1.10 KP 1.03 ! LA 0.93 NL 1.12 OV 0.92 PT 0.96 ! SC 0.86 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.21 FD 0.96 KP 1.02 LA 1.02 ! MK 1.04 NL 1.25 OV 0.89 PT 0.98 ! SC 1.04 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.23 FD 1.01 HN 0.99 KP 1.03 ! LA 0.95 NL 1.10 OV 0.89 PT 0.97 ! SC 0.94 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 0.98 KP 0.96 LA 0.96 ! MK 1.00 NL 1.30 OV 0.90 PT 1.01 ! SC 1.09 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 0.96 HN 0.98 KP 1.00 ! LA 0.98 NL 1.12 OV 0.83 PT 0.97 ! SC 0.88 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.05 FD 0.93 KP 1.06 LA 0.99 ! MK 1.01 NL 1.26 OV 0.87 PT 0.92 ! SC 1.05 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 0.97 HN 1.04 KP 1.01 ! LA 1.00 NL 1.13 OV 0.95 PT 1.02 ! SC 0.94 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.20 FD 0.94 KP 0.92 LA 0.98 ! MK 1.03 NL 1.31 OV 0.85 PT 1.05 ! SC 1.15 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 0.98 HN 1.01 KP 0.98 ! LA 0.98 NL 1.10 OV 0.89 PT 1.03 ! SC 0.81 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.95 FD 0.94 KP 0.99 LA 0.96 ! MK 0.96 NL 1.34 OV 0.95 PT 0.98 ! SC 0.97 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 1.01 HN 0.92 KP 1.06 ! LA 0.91 NL 1.02 OV 0.90 PT 1.02 ! SC 0.94 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.95 FD 0.95 KP 0.94 LA 1.03 ! MK 0.97 NL 1.23 OV 0.91 PT 1.02 ! SC 1.04 ! ! ! Fit before self-cal, rms=0.063831Jy sigma=1.190056 ! Fit after self-cal, rms=0.065311Jy sigma=1.179985 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8941 mas, bmaj=2.63 mas, bpa=4.625 degrees ! Estimated noise=0.205127 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00101322 Jy ! Component: 100 - total flux cleaned = 0.00122608 Jy ! Component: 150 - total flux cleaned = 0.00122335 Jy ! Component: 200 - total flux cleaned = 0.00120434 Jy ! Total flux subtracted in 200 components = 0.00120434 Jy ! Clean residual min=-0.001089 max=0.001195 Jy/beam ! Clean residual mean=-0.000000 rms=0.000283 Jy/beam ! Combined flux in latest and established models = 0.113508 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 105 components and 0.113508 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065277Jy sigma=1.179284 ! Fit after self-cal, rms=0.065412Jy sigma=1.178541 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065412Jy sigma=1.178541 ! Fit after self-cal, rms=0.065685Jy sigma=1.178424 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8927 mas, bmaj=2.633 mas, bpa=4.682 degrees ! Estimated noise=0.204779 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000452231 Jy ! Component: 100 - total flux cleaned = 0.000502267 Jy ! Component: 150 - total flux cleaned = 0.000540589 Jy ! Component: 200 - total flux cleaned = 0.00054111 Jy ! Total flux subtracted in 200 components = 0.00054111 Jy ! Clean residual min=-0.001132 max=0.001156 Jy/beam ! Clean residual mean=-0.000001 rms=0.000269 Jy/beam ! Combined flux in latest and established models = 0.114049 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 116 components and 0.114049 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065668Jy sigma=1.178116 ! Fit after self-cal, rms=0.065681Jy sigma=1.178030 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (6.2, -5.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000858751 Jy ! Component: 100 - total flux cleaned = 0.000975904 Jy ! Component: 150 - total flux cleaned = 0.00103301 Jy ! Component: 200 - total flux cleaned = 0.00101569 Jy ! Total flux subtracted in 200 components = 0.00101569 Jy ! Clean residual min=-0.000972 max=0.001077 Jy/beam ! Clean residual mean=-0.000000 rms=0.000253 Jy/beam ! Combined flux in latest and established models = 0.115065 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 130 components and 0.115065 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065662Jy sigma=1.177639 ! Fit after self-cal, rms=0.065664Jy sigma=1.177585 ! Inverting map ! Added new window around map position (-30, 15.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00104443 Jy ! Component: 100 - total flux cleaned = 0.00143448 Jy ! Component: 150 - total flux cleaned = 0.00157242 Jy ! Component: 200 - total flux cleaned = 0.00165844 Jy ! Total flux subtracted in 200 components = 0.00165844 Jy ! Clean residual min=-0.000939 max=0.001007 Jy/beam ! Clean residual mean=0.000000 rms=0.000227 Jy/beam ! Combined flux in latest and established models = 0.116723 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 143 components and 0.116723 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065643Jy sigma=1.177178 ! Fit after self-cal, rms=0.065643Jy sigma=1.177137 ! Inverting map ! Added new window around map position (48.2, -51.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000804835 Jy ! Component: 100 - total flux cleaned = 0.00107694 Jy ! Component: 150 - total flux cleaned = 0.00119374 Jy ! Component: 200 - total flux cleaned = 0.00122354 Jy ! Total flux subtracted in 200 components = 0.00122354 Jy ! Clean residual min=-0.000886 max=0.000956 Jy/beam ! Clean residual mean=0.000000 rms=0.000217 Jy/beam ! Combined flux in latest and established models = 0.117947 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 149 components and 0.117947 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065629Jy sigma=1.176872 ! Fit after self-cal, rms=0.065627Jy sigma=1.176846 ! Inverting map ! Added new window around map position (13.8, 24.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00081775 Jy ! Component: 100 - total flux cleaned = 0.0010353 Jy ! Component: 150 - total flux cleaned = 0.00114309 Jy ! Component: 200 - total flux cleaned = 0.00118508 Jy ! Total flux subtracted in 200 components = 0.00118508 Jy ! Clean residual min=-0.000842 max=0.000857 Jy/beam ! Clean residual mean=0.000000 rms=0.000206 Jy/beam ! Combined flux in latest and established models = 0.119132 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 171 components and 0.119132 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065613Jy sigma=1.176604 ! Fit after self-cal, rms=0.065611Jy sigma=1.176573 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065611Jy sigma=1.176573 ! Fit after self-cal, rms=0.065806Jy sigma=1.176495 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8936 mas, bmaj=2.638 mas, bpa=4.755 degrees ! Estimated noise=0.204522 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00033237 Jy ! Component: 100 - total flux cleaned = 0.00047281 Jy ! Component: 150 - total flux cleaned = 0.000514427 Jy ! Component: 200 - total flux cleaned = 0.000540592 Jy ! Total flux subtracted in 200 components = 0.000540592 Jy ! Clean residual min=-0.000816 max=0.000836 Jy/beam ! Clean residual mean=0.000000 rms=0.000197 Jy/beam ! Combined flux in latest and established models = 0.119672 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 177 components and 0.119673 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065799Jy sigma=1.176376 ! Fit after self-cal, rms=0.065808Jy sigma=1.176366 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000167034 Jy ! Component: 100 - total flux cleaned = 0.000167501 Jy ! Component: 150 - total flux cleaned = 0.000167512 Jy ! Component: 200 - total flux cleaned = 0.000167392 Jy ! Total flux subtracted in 200 components = 0.000167392 Jy ! Clean residual min=-0.000800 max=0.000824 Jy/beam ! Clean residual mean=0.000000 rms=0.000195 Jy/beam ! Combined flux in latest and established models = 0.11984 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 187 components and 0.11984 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065803Jy sigma=1.176293 ! Fit after self-cal, rms=0.065803Jy sigma=1.176289 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065803Jy sigma=1.176289 ! Fit after self-cal, rms=0.065927Jy sigma=1.176280 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.402 mas, bmaj=6.203 mas, bpa=2.042 degrees ! Estimated noise=0.252789 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000115027 Jy ! Component: 100 - total flux cleaned = 0.000104018 Jy ! Component: 150 - total flux cleaned = 7.21482e-05 Jy ! Component: 200 - total flux cleaned = 8.21272e-05 Jy ! Total flux subtracted in 200 components = 8.21272e-05 Jy ! Clean residual min=-0.000739 max=0.000972 Jy/beam ! Clean residual mean=0.000000 rms=0.000224 Jy/beam ! Combined flux in latest and established models = 0.119922 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 203 components and 0.119922 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065924Jy sigma=1.176236 ! Fit after self-cal, rms=0.065928Jy sigma=1.176231 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (30.4, 40.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00038753 Jy ! Component: 100 - total flux cleaned = 0.000315902 Jy ! Component: 150 - total flux cleaned = 0.000399394 Jy ! Component: 200 - total flux cleaned = 0.000507093 Jy ! Total flux subtracted in 200 components = 0.000507093 Jy ! Clean residual min=-0.000736 max=0.000650 Jy/beam ! Clean residual mean=0.000001 rms=0.000191 Jy/beam ! Combined flux in latest and established models = 0.120429 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 238 components and 0.120429 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065918Jy sigma=1.176042 ! Fit after self-cal, rms=0.065918Jy sigma=1.176017 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8943 mas, bmaj=2.641 mas, bpa=4.788 degrees ! Estimated noise=0.204541 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8943 x 2.641 at 4.788 degrees (North through East) ! Clean map min=-0.00075556 max=0.049517 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6494 mas, bmaj=2.064 mas, bpa=6.139 degrees ! Estimated noise=0.475715 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0429979 Jy ! Component: 100 - total flux cleaned = 0.0622021 Jy ! Component: 150 - total flux cleaned = 0.0726419 Jy ! Component: 200 - total flux cleaned = 0.0800203 Jy ! Total flux subtracted in 200 components = 0.0800203 Jy ! Clean residual min=-0.003150 max=0.004201 Jy/beam ! Clean residual mean=-0.000004 rms=0.000814 Jy/beam ! Combined flux in latest and established models = 0.0800204 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 0.0800204 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8943 mas, bmaj=2.641 mas, bpa=4.788 degrees ! Estimated noise=0.204541 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0104953 Jy ! Component: 100 - total flux cleaned = 0.0168851 Jy ! Component: 150 - total flux cleaned = 0.0212354 Jy ! Component: 200 - total flux cleaned = 0.0243668 Jy ! Total flux subtracted in 200 components = 0.0243668 Jy ! Clean residual min=-0.001414 max=0.002210 Jy/beam ! Clean residual mean=-0.000001 rms=0.000443 Jy/beam ! Combined flux in latest and established models = 0.104387 Jy ! Adding 73 model components to the UV plane model. ! The established model now contains 95 components and 0.104387 Jy ! Inverting map ! Added new window around map position (1, -1.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00246145 Jy ! Component: 100 - total flux cleaned = 0.00431938 Jy ! Component: 150 - total flux cleaned = 0.00587655 Jy ! Component: 200 - total flux cleaned = 0.0072402 Jy ! Total flux subtracted in 200 components = 0.0072402 Jy ! Clean residual min=-0.001147 max=0.001149 Jy/beam ! Clean residual mean=-0.000001 rms=0.000294 Jy/beam ! Combined flux in latest and established models = 0.111627 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 136 components and 0.111627 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.402 mas, bmaj=6.203 mas, bpa=2.042 degrees ! Estimated noise=0.252789 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00180636 Jy ! Component: 100 - total flux cleaned = 0.00310962 Jy ! Component: 150 - total flux cleaned = 0.0041743 Jy ! Component: 200 - total flux cleaned = 0.00495132 Jy ! Total flux subtracted in 200 components = 0.00495132 Jy ! Clean residual min=-0.001043 max=0.000955 Jy/beam ! Clean residual mean=-0.000001 rms=0.000285 Jy/beam ! Combined flux in latest and established models = 0.116579 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000619333 Jy ! Component: 100 - total flux cleaned = 0.00108391 Jy ! Component: 150 - total flux cleaned = 0.00142514 Jy ! Component: 200 - total flux cleaned = 0.00166495 Jy ! Total flux subtracted in 200 components = 0.00166495 Jy ! Clean residual min=-0.000900 max=0.000848 Jy/beam ! Clean residual mean=0.000000 rms=0.000241 Jy/beam ! Combined flux in latest and established models = 0.118244 Jy ! Adding 88 model components to the UV plane model. ! The established model now contains 214 components and 0.118244 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8943 mas, bmaj=2.641 mas, bpa=4.788 degrees ! Estimated noise=0.204541 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000303916 Jy ! Component: 100 - total flux cleaned = 0.000414812 Jy ! Component: 150 - total flux cleaned = 0.000517849 Jy ! Component: 200 - total flux cleaned = 0.000611407 Jy ! Total flux subtracted in 200 components = 0.000611407 Jy ! Clean residual min=-0.000866 max=0.000910 Jy/beam ! Clean residual mean=0.000000 rms=0.000198 Jy/beam ! Combined flux in latest and established models = 0.118855 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 238 components and 0.118855 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065937Jy sigma=1.176423 ! Fit after self-cal, rms=0.065915Jy sigma=1.176255 wmodel J2118-3019_X_map.mod ! Writing 238 model components to file: J2118-3019_X_map.mod wobs J2118-3019_X_uvs.fits ! Writing UV FITS file: J2118-3019_X_uvs.fits wwins J2118-3019_X_map.win ! wwins: Wrote 9 windows to J2118-3019_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000324026 Jy ! Component: 100 - total flux cleaned = -0.0004504 Jy ! Component: 150 - total flux cleaned = -0.000556443 Jy ! Component: 200 - total flux cleaned = -0.000644946 Jy ! Component: 250 - total flux cleaned = -0.00070563 Jy ! Component: 300 - total flux cleaned = -0.000799684 Jy ! Component: 350 - total flux cleaned = -0.000856829 Jy ! Component: 400 - total flux cleaned = -0.000912633 Jy ! Component: 450 - total flux cleaned = -0.000967006 Jy ! Component: 500 - total flux cleaned = -0.00100946 Jy ! Component: 550 - total flux cleaned = -0.0010407 Jy ! Component: 600 - total flux cleaned = -0.00109198 Jy ! Component: 650 - total flux cleaned = -0.00116204 Jy ! Component: 700 - total flux cleaned = -0.0012603 Jy ! Component: 750 - total flux cleaned = -0.00129892 Jy ! Component: 800 - total flux cleaned = -0.00135621 Jy ! Component: 850 - total flux cleaned = -0.00139379 Jy ! Component: 900 - total flux cleaned = -0.00141238 Jy ! Component: 950 - total flux cleaned = -0.00145824 Jy ! Component: 1000 - total flux cleaned = -0.00148548 Jy ! Component: 1050 - total flux cleaned = -0.00154813 Jy ! Component: 1100 - total flux cleaned = -0.0015923 Jy ! Component: 1150 - total flux cleaned = -0.00161849 Jy ! Component: 1200 - total flux cleaned = -0.00164421 Jy ! Component: 1250 - total flux cleaned = -0.00166124 Jy ! Component: 1300 - total flux cleaned = -0.0016781 Jy ! Component: 1350 - total flux cleaned = -0.00170315 Jy ! Component: 1400 - total flux cleaned = -0.00171955 Jy ! Component: 1450 - total flux cleaned = -0.00174417 Jy ! Component: 1500 - total flux cleaned = -0.00176046 Jy ! Component: 1550 - total flux cleaned = -0.00176852 Jy ! Component: 1600 - total flux cleaned = -0.00176863 Jy ! Component: 1650 - total flux cleaned = -0.00180045 Jy ! Component: 1700 - total flux cleaned = -0.0018161 Jy ! Component: 1750 - total flux cleaned = -0.00181608 Jy ! Component: 1800 - total flux cleaned = -0.00184701 Jy ! Component: 1850 - total flux cleaned = -0.0018393 Jy ! Component: 1900 - total flux cleaned = -0.00185454 Jy ! Component: 1950 - total flux cleaned = -0.00186951 Jy ! Component: 2000 - total flux cleaned = -0.00186193 Jy ! Component: 2050 - total flux cleaned = -0.00188422 Jy ! Component: 2100 - total flux cleaned = -0.00186955 Jy ! Component: 2150 - total flux cleaned = -0.0019206 Jy ! Component: 2200 - total flux cleaned = -0.00190604 Jy ! Component: 2250 - total flux cleaned = -0.00190592 Jy ! Component: 2300 - total flux cleaned = -0.00189874 Jy ! Component: 2350 - total flux cleaned = -0.00191997 Jy ! Component: 2400 - total flux cleaned = -0.00192702 Jy ! Component: 2450 - total flux cleaned = -0.00194103 Jy ! Component: 2500 - total flux cleaned = -0.0019479 Jy ! Component: 2550 - total flux cleaned = -0.00196867 Jy ! Component: 2600 - total flux cleaned = -0.00198235 Jy ! Component: 2650 - total flux cleaned = -0.00196867 Jy ! Component: 2700 - total flux cleaned = -0.00197543 Jy ! Component: 2750 - total flux cleaned = -0.00197547 Jy ! Component: 2800 - total flux cleaned = -0.00198211 Jy ! Component: 2850 - total flux cleaned = -0.00196218 Jy ! Component: 2900 - total flux cleaned = -0.00196219 Jy ! Component: 2950 - total flux cleaned = -0.00198192 Jy ! Component: 3000 - total flux cleaned = -0.00196236 Jy ! Component: 3050 - total flux cleaned = -0.00196236 Jy ! Component: 3100 - total flux cleaned = -0.00194304 Jy ! Component: 3150 - total flux cleaned = -0.00196224 Jy ! Component: 3200 - total flux cleaned = -0.00197494 Jy ! Component: 3250 - total flux cleaned = -0.00194962 Jy ! Component: 3300 - total flux cleaned = -0.00193081 Jy ! Component: 3350 - total flux cleaned = -0.00193711 Jy ! Component: 3400 - total flux cleaned = -0.00195574 Jy ! Component: 3450 - total flux cleaned = -0.001931 Jy ! Component: 3500 - total flux cleaned = -0.00194939 Jy ! Component: 3550 - total flux cleaned = -0.00194945 Jy ! Component: 3600 - total flux cleaned = -0.00194336 Jy ! Component: 3650 - total flux cleaned = -0.00197367 Jy ! Component: 3700 - total flux cleaned = -0.00196761 Jy ! Component: 3750 - total flux cleaned = -0.00196765 Jy ! Component: 3800 - total flux cleaned = -0.00195577 Jy ! Component: 3850 - total flux cleaned = -0.00197947 Jy ! Component: 3900 - total flux cleaned = -0.00196772 Jy ! Component: 3950 - total flux cleaned = -0.00199703 Jy ! Component: 4000 - total flux cleaned = -0.00199114 Jy ! Component: 4050 - total flux cleaned = -0.00200281 Jy ! Total flux subtracted in 4096 components = -0.00201433 Jy ! Clean residual min=-0.000388 max=0.000379 Jy/beam ! Clean residual mean=-0.000000 rms=0.000098 Jy/beam ! Combined flux in latest and established models = 0.116841 Jy keep ! Adding 281 model components to the UV plane model. ! The established model now contains 519 components and 0.116841 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J2118-3019_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8943 x 2.641 at 4.788 degrees (North through East) ! Clean map min=-0.00064405 max=0.051186 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J2118-3019_X_map.fits wmodel /vlbi/uf001/uva//J2118-3019_X_map.mod ! Writing 519 model components to file: /vlbi/uf001/uva//J2118-3019_X_map.mod wobs /vlbi/uf001/uva//J2118-3019_X_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J2118-3019_X_uvs.fits wwins /vlbi/uf001/uva//J2118-3019_X_map.win ! wwins: Wrote 10 windows to /vlbi/uf001/uva//J2118-3019_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0511857 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 9.80658e-05 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.574765 0.574765 1.14953 2.29906 4.59812 9.19623 18.3925 36.7849 73.5699 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0002 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.051 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 521.952 quit ! Quitting program ! Log file /vlbi/uf001/uva//J2118-3019_X_dfm.log closed on Mon Jan 14 05:48:49 2019