! Started logfile: /vlbi/uf001/uvm//J2115+2933_X_b_dfm.log on Sun Jan 13 22:32:38 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uvm//J2115+2933_X_b_uvm.fits ! Reading UV FITS file: /vlbi/uf001/uvm//J2115+2933_X_b_uvm.fits ! AN table 1: 32 integrations on 45 of 45 possible baselines. ! AN table 2: 5 integrations on 36 of 36 possible baselines. ! AN table 3: 10 integrations on 28 of 28 possible baselines. ! AN table 4: 10 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.766972 visibilities/baseline/integration-bin. ! Found source: J2115+2933 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 20064 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J2115+2933_X_b] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 119 telescope corrections were flagged in sub-array 1. ! A total of 13 telescope corrections were flagged in sub-array 2. ! A total of 30 telescope corrections were flagged in sub-array 3. ! A total of 24 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 2. ! A total of 119 telescope corrections were flagged in sub-array 1. ! A total of 13 telescope corrections were flagged in sub-array 2. ! A total of 30 telescope corrections were flagged in sub-array 3. ! A total of 24 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 3. ! A total of 119 telescope corrections were flagged in sub-array 1. ! A total of 13 telescope corrections were flagged in sub-array 2. ! A total of 30 telescope corrections were flagged in sub-array 3. ! A total of 24 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 4. ! A total of 119 telescope corrections were flagged in sub-array 1. ! A total of 13 telescope corrections were flagged in sub-array 2. ! A total of 30 telescope corrections were flagged in sub-array 3. ! A total of 24 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 5. ! A total of 119 telescope corrections were flagged in sub-array 1. ! A total of 13 telescope corrections were flagged in sub-array 2. ! A total of 30 telescope corrections were flagged in sub-array 3. ! A total of 24 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 6. ! A total of 119 telescope corrections were flagged in sub-array 1. ! A total of 13 telescope corrections were flagged in sub-array 2. ! A total of 30 telescope corrections were flagged in sub-array 3. ! A total of 24 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 7. ! A total of 119 telescope corrections were flagged in sub-array 1. ! A total of 13 telescope corrections were flagged in sub-array 2. ! A total of 30 telescope corrections were flagged in sub-array 3. ! A total of 24 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 8. ! A total of 119 telescope corrections were flagged in sub-array 1. ! A total of 13 telescope corrections were flagged in sub-array 2. ! A total of 30 telescope corrections were flagged in sub-array 3. ! A total of 24 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 9. ! A total of 119 telescope corrections were flagged in sub-array 1. ! A total of 13 telescope corrections were flagged in sub-array 2. ! A total of 30 telescope corrections were flagged in sub-array 3. ! A total of 24 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 10. ! A total of 119 telescope corrections were flagged in sub-array 1. ! A total of 13 telescope corrections were flagged in sub-array 2. ! A total of 30 telescope corrections were flagged in sub-array 3. ! A total of 24 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 11. ! A total of 119 telescope corrections were flagged in sub-array 1. ! A total of 13 telescope corrections were flagged in sub-array 2. ! A total of 30 telescope corrections were flagged in sub-array 3. ! A total of 24 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 12. ! A total of 119 telescope corrections were flagged in sub-array 1. ! A total of 13 telescope corrections were flagged in sub-array 2. ! A total of 30 telescope corrections were flagged in sub-array 3. ! A total of 24 telescope corrections were flagged in sub-array 4. ! ! Fit before self-cal, rms=1.130783Jy sigma=76.238418 ! Fit after self-cal, rms=0.524961Jy sigma=69.962598 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8371 mas, bmaj=1.58 mas, bpa=-1.406 degrees ! Estimated noise=0.329641 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.288011 Jy ! Component: 100 - total flux cleaned = 0.386905 Jy ! Total flux subtracted in 100 components = 0.386905 Jy ! Clean residual min=-0.061451 max=0.066920 Jy/beam ! Clean residual mean=-0.000050 rms=0.015576 Jy/beam ! Combined flux in latest and established models = 0.386905 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.386905 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.248185Jy sigma=20.681194 ! Fit after self-cal, rms=0.227183Jy sigma=20.551350 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.121 mas, bmaj=1.764 mas, bpa=0.2386 degrees ! Estimated noise=0.206524 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0953009 Jy ! Component: 100 - total flux cleaned = 0.151392 Jy ! Component: 150 - total flux cleaned = 0.171633 Jy ! Component: 200 - total flux cleaned = 0.177652 Jy ! Total flux subtracted in 200 components = 0.177652 Jy ! Clean residual min=-0.058511 max=0.065159 Jy/beam ! Clean residual mean=-0.000040 rms=0.017464 Jy/beam ! Combined flux in latest and established models = 0.564557 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 16 components and 0.564557 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.194255Jy sigma=16.571780 ! Fit after self-cal, rms=0.190978Jy sigma=16.546928 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.121 x 1.764 at 0.2386 degrees (North through East) ! Clean map min=-0.056321 max=0.36777 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.76 FD 0.86 HN 0.85 KP 0.90 ! LA 0.90 MK 0.91 NL 1.04 OV 0.82 ! PT 0.83 SC 0.77 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.78 HN 0.93 KP 0.88 LA 0.83 ! MK 1.01 NL 1.09 OV 0.81 PT 0.83 ! SC 0.62 ! ! Telescope amplitude corrections in sub-array 3: ! BR 221.40 FD 0.85 HN 0.97 KP 0.96 ! LA 0.96 NL 1.14 OV 0.81 PT 0.87 ! ! A total of 3 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.80 FD 0.85 HN 0.89 KP 0.99 ! LA 0.97 MK 0.87 NL 1.09 OV 0.84 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.77 FD 0.85 HN 0.85 KP 0.90 ! LA 0.90 MK 0.92 NL 1.04 OV 0.82 ! PT 0.83 SC 0.79 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.74 HN 0.92 KP 0.88 LA 0.83 ! MK 0.98 NL 1.06 OV 0.83 PT 0.84 ! SC 0.64 ! ! Telescope amplitude corrections in sub-array 3: ! BR 262.66 FD 0.85 HN 0.97 KP 0.97 ! LA 0.95 NL 1.16 OV 0.82 PT 0.88 ! ! A total of 3 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.81 FD 0.88 HN 0.91 KP 0.95 ! LA 0.94 MK 0.89 NL 1.08 OV 0.83 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.77 FD 0.85 HN 0.85 KP 0.91 ! LA 0.90 MK 0.92 NL 1.04 OV 0.82 ! PT 0.83 SC 0.77 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.79 HN 0.90 KP 0.90 LA 0.86 ! MK 1.00 NL 1.06 OV 0.82 PT 0.85 ! SC 0.60 ! ! Telescope amplitude corrections in sub-array 3: ! BR 292.64 FD 0.85 HN 0.96 KP 0.98 ! LA 0.96 NL 1.15 OV 0.78 PT 0.88 ! ! A total of 3 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.83 FD 0.87 HN 0.91 KP 0.96 ! LA 0.96 MK 0.86 NL 1.09 OV 0.85 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.79 FD 0.85 HN 0.85 KP 0.91 ! LA 0.90 MK 0.91 NL 1.02 OV 0.82 ! PT 0.83 SC 0.79 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.81 HN 0.91 KP 0.89 LA 0.85 ! MK 0.99 NL 1.06 OV 0.83 PT 0.83 ! SC 0.62 ! ! Telescope amplitude corrections in sub-array 3: ! BR 168.92 FD 0.85 HN 0.97 KP 0.96 ! LA 0.97 NL 1.14 OV 0.82 PT 0.90 ! ! A total of 3 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.86 FD 0.87 HN 0.90 KP 0.96 ! LA 0.95 MK 0.89 NL 1.12 OV 0.82 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.78 FD 0.85 HN 0.86 KP 0.91 ! LA 0.89 MK 0.92 NL 1.04 OV 0.83 ! PT 0.84 SC 0.78 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.83 HN 0.89 KP 0.91 LA 0.84 ! MK 0.99 NL 1.05 OV 0.81 PT 0.85 ! SC 0.62 ! ! Telescope amplitude corrections in sub-array 3: ! BR 181.13 FD 0.84 HN 0.92 KP 0.96 ! LA 0.95 NL 1.17 OV 0.81 PT 0.89 ! ! A total of 3 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.86 FD 0.86 HN 0.90 KP 0.98 ! LA 0.95 MK 0.85 NL 1.10 OV 0.84 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.77 FD 0.84 HN 0.87 KP 0.91 ! LA 0.89 MK 0.92 NL 1.04 OV 0.82 ! PT 0.83 SC 0.77 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.75 HN 0.91 KP 0.89 LA 0.84 ! MK 0.99 NL 1.06 OV 0.84 PT 0.83 ! SC 0.62 ! ! Telescope amplitude corrections in sub-array 3: ! BR 173.31 FD 0.83 HN 0.97 KP 0.95 ! LA 0.97 NL 1.15 OV 0.78 PT 0.88 ! ! A total of 3 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.82 FD 0.87 HN 0.91 KP 0.98 ! LA 0.92 MK 0.90 NL 1.14 OV 0.84 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.78 FD 0.85 HN 0.85 KP 0.91 ! LA 0.89 MK 0.92 NL 1.04 OV 0.82 ! PT 0.83 SC 0.79 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.77 HN 0.89 KP 0.89 LA 0.81 ! MK 0.99 NL 1.09 OV 0.83 PT 0.81 ! SC 0.64 ! ! Telescope amplitude corrections in sub-array 3: ! BR 214.71 FD 0.84 HN 0.97 KP 0.97 ! LA 0.95 NL 1.15 OV 0.79 PT 0.92 ! ! A total of 3 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.82 FD 0.86 HN 0.90 KP 0.98 ! LA 0.97 MK 0.89 NL 1.10 OV 0.84 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.78 FD 0.85 HN 0.85 KP 0.91 ! LA 0.90 MK 0.94 NL 1.05 OV 0.82 ! PT 0.83 SC 0.77 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.77 HN 0.88 KP 0.89 LA 0.81 ! MK 1.00 NL 1.05 OV 0.83 PT 0.84 ! SC 0.61 ! ! Telescope amplitude corrections in sub-array 3: ! BR 155.89 FD 0.83 HN 0.95 KP 0.96 ! LA 0.95 NL 1.16 OV 0.80 PT 0.92 ! ! A total of 3 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.79 FD 0.85 HN 0.97 KP 0.96 ! LA 0.96 MK 0.90 NL 1.12 OV 0.84 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.78 FD 0.85 HN 0.86 KP 0.90 ! LA 0.89 MK 0.92 NL 1.05 OV 0.82 ! PT 0.83 SC 0.78 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.80 HN 0.92 KP 0.91 LA 0.82 ! MK 0.97 NL 1.06 OV 0.82 PT 0.84 ! SC 0.59 ! ! Telescope amplitude corrections in sub-array 3: ! BR 252.15 FD 0.83 HN 0.97 KP 0.97 ! LA 0.95 NL 1.17 OV 0.81 PT 0.89 ! ! A total of 3 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.79 FD 0.90 HN 0.94 KP 0.99 ! LA 0.95 MK 0.88 NL 1.11 OV 0.80 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.79 FD 0.86 HN 0.85 KP 0.91 ! LA 0.89 MK 0.93 NL 1.05 OV 0.82 ! PT 0.83 SC 0.78 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.80 HN 0.89 KP 0.90 LA 0.80 ! MK 0.99 NL 1.05 OV 0.83 PT 0.85 ! SC 0.62 ! ! Telescope amplitude corrections in sub-array 3: ! BR 190.10 FD 0.85 HN 0.95 KP 0.95 ! LA 0.94 NL 1.15 OV 0.80 PT 0.89 ! ! A total of 3 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.84 FD 0.89 HN 0.89 KP 0.96 ! LA 0.96 MK 0.85 NL 1.10 OV 0.84 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.79 FD 0.85 HN 0.85 KP 0.90 ! LA 0.90 MK 0.92 NL 1.05 OV 0.82 ! PT 0.83 SC 0.77 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.78 HN 0.90 KP 0.88 LA 0.81 ! MK 0.98 NL 1.09 OV 0.84 PT 0.83 ! SC 0.63 ! ! Telescope amplitude corrections in sub-array 3: ! BR 213.43 FD 0.84 HN 0.97 KP 0.97 ! LA 0.95 NL 1.15 OV 0.79 PT 0.89 ! ! A total of 3 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.80 FD 0.87 HN 0.91 KP 0.98 ! LA 0.95 MK 0.89 NL 1.07 OV 0.85 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.77 FD 0.86 HN 0.86 KP 0.91 ! LA 0.89 MK 0.92 NL 1.04 OV 0.82 ! PT 0.83 SC 0.78 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.80 HN 0.89 KP 0.86 LA 0.80 ! MK 1.01 NL 1.09 OV 0.83 PT 0.84 ! SC 0.62 ! ! Telescope amplitude corrections in sub-array 3: ! BR 143.71 FD 0.85 HN 1.01 KP 0.95 ! LA 0.96 NL 1.16 OV 0.78 PT 0.87 ! ! A total of 3 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.79 FD 0.88 HN 0.91 KP 0.98 ! LA 0.96 MK 0.94 NL 1.12 OV 0.83 ! ! ! Fit before self-cal, rms=0.190978Jy sigma=16.546928 ! Fit after self-cal, rms=0.126805Jy sigma=2.592072 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9423 mas, bmaj=1.864 mas, bpa=-1.214 degrees ! Estimated noise=0.243748 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0241597 Jy ! Component: 100 - total flux cleaned = -0.0307199 Jy ! Component: 150 - total flux cleaned = -0.0316531 Jy ! Component: 200 - total flux cleaned = -0.0340534 Jy ! Total flux subtracted in 200 components = -0.0340534 Jy ! Clean residual min=-0.016853 max=0.011790 Jy/beam ! Clean residual mean=-0.000007 rms=0.001451 Jy/beam ! Combined flux in latest and established models = 0.530504 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 22 components and 0.530504 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.104277Jy sigma=1.796460 ! Fit after self-cal, rms=0.103598Jy sigma=1.726268 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.103598Jy sigma=1.726268 ! Fit after self-cal, rms=0.122544Jy sigma=1.612979 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9494 mas, bmaj=1.878 mas, bpa=-2.475 degrees ! Estimated noise=0.242303 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0158346 Jy ! Component: 100 - total flux cleaned = -0.0169326 Jy ! Component: 150 - total flux cleaned = -0.0187385 Jy ! Component: 200 - total flux cleaned = -0.0198534 Jy ! Total flux subtracted in 200 components = -0.0198534 Jy ! Clean residual min=-0.009129 max=0.008752 Jy/beam ! Clean residual mean=-0.000006 rms=0.000991 Jy/beam ! Combined flux in latest and established models = 0.51065 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 25 components and 0.51065 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.118213Jy sigma=1.377064 ! Fit after self-cal, rms=0.117996Jy sigma=1.373157 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1, -1.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00109332 Jy ! Component: 100 - total flux cleaned = 0.00180277 Jy ! Component: 150 - total flux cleaned = 0.00297777 Jy ! Component: 200 - total flux cleaned = 0.00374818 Jy ! Total flux subtracted in 200 components = 0.00374818 Jy ! Clean residual min=-0.005157 max=0.004954 Jy/beam ! Clean residual mean=-0.000005 rms=0.000832 Jy/beam ! Combined flux in latest and established models = 0.514399 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 41 components and 0.514398 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.116511Jy sigma=1.283967 ! Fit after self-cal, rms=0.116329Jy sigma=1.279564 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.116329Jy sigma=1.279564 ! Fit after self-cal, rms=0.123832Jy sigma=1.227062 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9491 mas, bmaj=1.907 mas, bpa=-2.677 degrees ! Estimated noise=0.242579 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00838413 Jy ! Component: 100 - total flux cleaned = -0.00868127 Jy ! Component: 150 - total flux cleaned = -0.00822406 Jy ! Component: 200 - total flux cleaned = -0.00782436 Jy ! Total flux subtracted in 200 components = -0.00782436 Jy ! Clean residual min=-0.004076 max=0.003852 Jy/beam ! Clean residual mean=-0.000005 rms=0.000623 Jy/beam ! Combined flux in latest and established models = 0.506574 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 42 components and 0.506574 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.122744Jy sigma=1.154386 ! Fit after self-cal, rms=0.122594Jy sigma=1.152260 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000263425 Jy ! Component: 100 - total flux cleaned = 0.000761589 Jy ! Component: 150 - total flux cleaned = 0.0012039 Jy ! Component: 200 - total flux cleaned = 0.00133607 Jy ! Total flux subtracted in 200 components = 0.00133607 Jy ! Clean residual min=-0.003183 max=0.003442 Jy/beam ! Clean residual mean=-0.000005 rms=0.000567 Jy/beam ! Combined flux in latest and established models = 0.50791 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 46 components and 0.50791 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.122239Jy sigma=1.127655 ! Fit after self-cal, rms=0.122172Jy sigma=1.126052 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.122172Jy sigma=1.126052 ! Fit after self-cal, rms=0.126128Jy sigma=1.111762 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.127 mas, bmaj=2.799 mas, bpa=-5.385 degrees ! Estimated noise=0.305121 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00276781 Jy ! Component: 100 - total flux cleaned = -0.00225678 Jy ! Component: 150 - total flux cleaned = -0.00225668 Jy ! Component: 200 - total flux cleaned = -0.00216322 Jy ! Total flux subtracted in 200 components = -0.00216322 Jy ! Clean residual min=-0.002424 max=0.003079 Jy/beam ! Clean residual mean=-0.000009 rms=0.000632 Jy/beam ! Combined flux in latest and established models = 0.505747 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 57 components and 0.505747 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.125892Jy sigma=1.094167 ! Fit after self-cal, rms=0.125775Jy sigma=1.091278 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000386675 Jy ! Component: 100 - total flux cleaned = 0.000246147 Jy ! Component: 150 - total flux cleaned = 0.000598768 Jy ! Component: 200 - total flux cleaned = 0.000714353 Jy ! Total flux subtracted in 200 components = 0.000714353 Jy ! Clean residual min=-0.002301 max=0.002752 Jy/beam ! Clean residual mean=-0.000008 rms=0.000599 Jy/beam ! Combined flux in latest and established models = 0.506461 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 71 components and 0.506461 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.125710Jy sigma=1.086056 ! Fit after self-cal, rms=0.125656Jy sigma=1.084506 ! Inverting map ! Added new window around map position (1, -6.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00190349 Jy ! Component: 100 - total flux cleaned = 0.00315534 Jy ! Component: 150 - total flux cleaned = 0.00400086 Jy ! Component: 200 - total flux cleaned = 0.0047403 Jy ! Total flux subtracted in 200 components = 0.0047403 Jy ! Clean residual min=-0.002021 max=0.002408 Jy/beam ! Clean residual mean=-0.000005 rms=0.000504 Jy/beam ! Combined flux in latest and established models = 0.511202 Jy ! Performing phase self-cal ! Adding 54 model components to the UV plane model. ! The established model now contains 117 components and 0.511202 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.125594Jy sigma=1.080279 ! Fit after self-cal, rms=0.125576Jy sigma=1.079782 ! Inverting map ! Added new window around map position (-4.2, -7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00130863 Jy ! Component: 100 - total flux cleaned = 0.00226737 Jy ! Component: 150 - total flux cleaned = 0.00298379 Jy ! Component: 200 - total flux cleaned = 0.00362323 Jy ! Total flux subtracted in 200 components = 0.00362323 Jy ! Clean residual min=-0.001804 max=0.001749 Jy/beam ! Clean residual mean=-0.000003 rms=0.000450 Jy/beam ! Combined flux in latest and established models = 0.514825 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 146 components and 0.514825 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.125543Jy sigma=1.077045 ! Fit after self-cal, rms=0.125522Jy sigma=1.076736 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.9497 mas, bmaj=1.922 mas, bpa=-2.77 degrees ! Estimated noise=0.242913 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9497 x 1.922 at -2.77 degrees (North through East) ! Clean map min=-0.0018614 max=0.39731 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7452 mas, bmaj=1.593 mas, bpa=-3.089 degrees ! Estimated noise=0.340976 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.301861 Jy ! Component: 100 - total flux cleaned = 0.380562 Jy ! Component: 150 - total flux cleaned = 0.415091 Jy ! Component: 200 - total flux cleaned = 0.435244 Jy ! Total flux subtracted in 200 components = 0.435244 Jy ! Clean residual min=-0.004578 max=0.010957 Jy/beam ! Clean residual mean=-0.000000 rms=0.000882 Jy/beam ! Combined flux in latest and established models = 0.435244 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.435244 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9497 mas, bmaj=1.922 mas, bpa=-2.77 degrees ! Estimated noise=0.242913 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0225994 Jy ! Component: 100 - total flux cleaned = 0.0363888 Jy ! Component: 150 - total flux cleaned = 0.0455983 Jy ! Component: 200 - total flux cleaned = 0.0521724 Jy ! Total flux subtracted in 200 components = 0.0521724 Jy ! Clean residual min=-0.002195 max=0.003914 Jy/beam ! Clean residual mean=-0.000007 rms=0.000584 Jy/beam ! Combined flux in latest and established models = 0.487416 Jy ! Adding 59 model components to the UV plane model. ! The established model now contains 72 components and 0.487416 Jy ! Inverting map ! Added new window around map position (0.2, 1.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00490169 Jy ! Component: 100 - total flux cleaned = 0.00865645 Jy ! Component: 150 - total flux cleaned = 0.0117289 Jy ! Component: 200 - total flux cleaned = 0.0143733 Jy ! Total flux subtracted in 200 components = 0.0143733 Jy ! Clean residual min=-0.001956 max=0.002211 Jy/beam ! Clean residual mean=-0.000004 rms=0.000422 Jy/beam ! Combined flux in latest and established models = 0.501789 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 102 components and 0.50179 Jy ! Inverting map ! Added new window around map position (6.4, -8.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00246687 Jy ! Component: 100 - total flux cleaned = 0.00459827 Jy ! Component: 150 - total flux cleaned = 0.00630264 Jy ! Component: 200 - total flux cleaned = 0.00779033 Jy ! Total flux subtracted in 200 components = 0.00779033 Jy ! Clean residual min=-0.002006 max=0.001826 Jy/beam ! Clean residual mean=-0.000003 rms=0.000365 Jy/beam ! Combined flux in latest and established models = 0.50958 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 126 components and 0.50958 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.127 mas, bmaj=2.799 mas, bpa=-5.385 degrees ! Estimated noise=0.305121 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00220814 Jy ! Component: 100 - total flux cleaned = 0.00381883 Jy ! Component: 150 - total flux cleaned = 0.00517058 Jy ! Component: 200 - total flux cleaned = 0.00592649 Jy ! Total flux subtracted in 200 components = 0.00592649 Jy ! Clean residual min=-0.001776 max=0.001949 Jy/beam ! Clean residual mean=-0.000003 rms=0.000431 Jy/beam ! Combined flux in latest and established models = 0.515506 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-6, 6.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00191903 Jy ! Component: 100 - total flux cleaned = 0.0025815 Jy ! Component: 150 - total flux cleaned = 0.00304648 Jy ! Component: 200 - total flux cleaned = 0.00350874 Jy ! Total flux subtracted in 200 components = 0.00350874 Jy ! Clean residual min=-0.001551 max=0.001397 Jy/beam ! Clean residual mean=-0.000001 rms=0.000376 Jy/beam ! Combined flux in latest and established models = 0.519015 Jy ! Adding 114 model components to the UV plane model. ! The established model now contains 233 components and 0.519015 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9497 mas, bmaj=1.922 mas, bpa=-2.77 degrees ! Estimated noise=0.242913 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000426882 Jy ! Component: 100 - total flux cleaned = 0.000369967 Jy ! Component: 150 - total flux cleaned = 0.000621107 Jy ! Component: 200 - total flux cleaned = 0.00086098 Jy ! Total flux subtracted in 200 components = 0.00086098 Jy ! Clean residual min=-0.001878 max=0.001481 Jy/beam ! Clean residual mean=-0.000000 rms=0.000311 Jy/beam ! Combined flux in latest and established models = 0.519876 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 263 components and 0.519876 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.124823Jy sigma=1.032962 ! Fit after self-cal, rms=0.124791Jy sigma=1.030848 wmodel J2115+2933_X_b_map.mod ! Writing 263 model components to file: J2115+2933_X_b_map.mod wobs J2115+2933_X_b_uvs.fits ! Writing UV FITS file: J2115+2933_X_b_uvs.fits wwins J2115+2933_X_b_map.win ! wwins: Wrote 7 windows to J2115+2933_X_b_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000609107 Jy ! Component: 100 - total flux cleaned = -0.00105144 Jy ! Component: 150 - total flux cleaned = -0.0015183 Jy ! Component: 200 - total flux cleaned = -0.00185002 Jy ! Component: 250 - total flux cleaned = -0.00217147 Jy ! Component: 300 - total flux cleaned = -0.00237311 Jy ! Component: 350 - total flux cleaned = -0.00261463 Jy ! Component: 400 - total flux cleaned = -0.00283004 Jy ! Component: 450 - total flux cleaned = -0.00308406 Jy ! Component: 500 - total flux cleaned = -0.0033547 Jy ! Component: 550 - total flux cleaned = -0.00353911 Jy ! Component: 600 - total flux cleaned = -0.00370158 Jy ! Component: 650 - total flux cleaned = -0.00396169 Jy ! Component: 700 - total flux cleaned = -0.00415938 Jy ! Component: 750 - total flux cleaned = -0.00431556 Jy ! Component: 800 - total flux cleaned = -0.00443144 Jy ! Component: 850 - total flux cleaned = -0.00454603 Jy ! Component: 900 - total flux cleaned = -0.00465934 Jy ! Component: 950 - total flux cleaned = -0.00477184 Jy ! Component: 1000 - total flux cleaned = -0.00486478 Jy ! Component: 1050 - total flux cleaned = -0.00495674 Jy ! Component: 1100 - total flux cleaned = -0.00508457 Jy ! Component: 1150 - total flux cleaned = -0.00513881 Jy ! Component: 1200 - total flux cleaned = -0.00526464 Jy ! Component: 1250 - total flux cleaned = -0.00535372 Jy ! Component: 1300 - total flux cleaned = -0.00554813 Jy ! Component: 1350 - total flux cleaned = -0.00567067 Jy ! Component: 1400 - total flux cleaned = -0.00577514 Jy ! Component: 1450 - total flux cleaned = -0.00591352 Jy ! Component: 1500 - total flux cleaned = -0.00596512 Jy ! Component: 1550 - total flux cleaned = -0.0061015 Jy ! Component: 1600 - total flux cleaned = -0.00620336 Jy ! Component: 1650 - total flux cleaned = -0.00627077 Jy ! Component: 1700 - total flux cleaned = -0.00637119 Jy ! Component: 1750 - total flux cleaned = -0.0065542 Jy ! Component: 1800 - total flux cleaned = -0.00658725 Jy ! Component: 1850 - total flux cleaned = -0.00671859 Jy ! Component: 1900 - total flux cleaned = -0.00676769 Jy ! Component: 1950 - total flux cleaned = -0.00680023 Jy ! Component: 2000 - total flux cleaned = -0.00696177 Jy ! Component: 2050 - total flux cleaned = -0.00702602 Jy ! Component: 2100 - total flux cleaned = -0.00708982 Jy ! Component: 2150 - total flux cleaned = -0.007201 Jy ! Component: 2200 - total flux cleaned = -0.00729572 Jy ! Component: 2250 - total flux cleaned = -0.00729569 Jy ! Component: 2300 - total flux cleaned = -0.00742061 Jy ! Component: 2350 - total flux cleaned = -0.00743622 Jy ! Component: 2400 - total flux cleaned = -0.00751356 Jy ! Component: 2450 - total flux cleaned = -0.00755987 Jy ! Component: 2500 - total flux cleaned = -0.00759042 Jy ! Component: 2550 - total flux cleaned = -0.00768212 Jy ! Component: 2600 - total flux cleaned = -0.00771247 Jy ! Component: 2650 - total flux cleaned = -0.0078184 Jy ! Component: 2700 - total flux cleaned = -0.00781835 Jy ! Component: 2750 - total flux cleaned = -0.0078633 Jy ! Component: 2800 - total flux cleaned = -0.00795277 Jy ! Component: 2850 - total flux cleaned = -0.00799729 Jy ! Component: 2900 - total flux cleaned = -0.00811555 Jy ! Component: 2950 - total flux cleaned = -0.00813026 Jy ! Component: 3000 - total flux cleaned = -0.00815962 Jy ! Component: 3050 - total flux cleaned = -0.00823262 Jy ! Component: 3100 - total flux cleaned = -0.00829086 Jy ! Component: 3150 - total flux cleaned = -0.00833426 Jy ! Component: 3200 - total flux cleaned = -0.00836302 Jy ! Component: 3250 - total flux cleaned = -0.00846358 Jy ! Component: 3300 - total flux cleaned = -0.00856368 Jy ! Component: 3350 - total flux cleaned = -0.00857799 Jy ! Component: 3400 - total flux cleaned = -0.0086064 Jy ! Component: 3450 - total flux cleaned = -0.00866295 Jy ! Component: 3500 - total flux cleaned = -0.00871925 Jy ! Component: 3550 - total flux cleaned = -0.00878937 Jy ! Component: 3600 - total flux cleaned = -0.00884523 Jy ! Component: 3650 - total flux cleaned = -0.00890087 Jy ! Component: 3700 - total flux cleaned = -0.00891473 Jy ! Component: 3750 - total flux cleaned = -0.0089838 Jy ! Component: 3800 - total flux cleaned = -0.00895631 Jy ! Component: 3850 - total flux cleaned = -0.00901114 Jy ! Component: 3900 - total flux cleaned = -0.00906578 Jy ! Component: 3950 - total flux cleaned = -0.00902492 Jy ! Component: 4000 - total flux cleaned = -0.00906557 Jy ! Component: 4050 - total flux cleaned = -0.00920086 Jy ! Total flux subtracted in 4096 components = -0.00917394 Jy ! Clean residual min=-0.000704 max=0.000793 Jy/beam ! Clean residual mean=-0.000000 rms=0.000231 Jy/beam ! Combined flux in latest and established models = 0.510702 Jy keep ! Adding 322 model components to the UV plane model. ! The established model now contains 581 components and 0.510703 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uvm//J2115+2933_X_b_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9497 x 1.922 at -2.77 degrees (North through East) ! Clean map min=-0.0016001 max=0.39782 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uvm//J2115+2933_X_b_map.fits wmodel /vlbi/uf001/uvm//J2115+2933_X_b_map.mod ! Writing 581 model components to file: /vlbi/uf001/uvm//J2115+2933_X_b_map.mod wobs /vlbi/uf001/uvm//J2115+2933_X_b_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uvm//J2115+2933_X_b_uvs.fits wwins /vlbi/uf001/uvm//J2115+2933_X_b_map.win ! wwins: Wrote 8 windows to /vlbi/uf001/uvm//J2115+2933_X_b_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.397817 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000230365 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.173722 0.173722 0.347444 0.694888 1.38978 2.77955 5.5591 11.1182 22.2364 44.4728 88.9456 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.397 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1726.9 quit ! Quitting program ! Log file /vlbi/uf001/uvm//J2115+2933_X_b_dfm.log closed on Sun Jan 13 22:32:43 2019