! Started logfile: /vlbi/uf001/uva//J2114+4634_S_b_dfm.log on Mon Jan 14 05:47:12 2019 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /vlbi/uf001/uva//J2114+4634_S_b_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J2114+4634_S_b_uva.fits ! AN table 1: 58 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.861453 visibilities/baseline/integration-bin. ! Found source: J2114+4634 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 40 lines of history. ! ! Reading 4197 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J2114+4634_S_b] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 47 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 47 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 47 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.006564Jy sigma=19.767275 ! Fit after self-cal, rms=0.911065Jy sigma=18.101012 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.497 mas, bmaj=6.845 mas, bpa=25.36 degrees ! Estimated noise=0.707 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0621888 Jy ! Component: 100 - total flux cleaned = 0.0844407 Jy ! Total flux subtracted in 100 components = 0.0844407 Jy ! Clean residual min=-0.007353 max=0.010886 Jy/beam ! Clean residual mean=-0.000086 rms=0.002244 Jy/beam ! Combined flux in latest and established models = 0.0844407 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.0844407 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.119133Jy sigma=1.391004 ! Fit after self-cal, rms=0.118963Jy sigma=1.386762 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.273 mas, bmaj=7.16 mas, bpa=24.71 degrees ! Estimated noise=0.592524 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0172088 Jy ! Component: 100 - total flux cleaned = 0.0267276 Jy ! Component: 150 - total flux cleaned = 0.0324441 Jy ! Component: 200 - total flux cleaned = 0.0352944 Jy ! Total flux subtracted in 200 components = 0.0352944 Jy ! Clean residual min=-0.009165 max=0.005733 Jy/beam ! Clean residual mean=-0.000023 rms=0.001640 Jy/beam ! Combined flux in latest and established models = 0.119735 Jy ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 68 components and 0.119735 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.114884Jy sigma=1.324913 ! Fit after self-cal, rms=0.114766Jy sigma=1.323413 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.273 x 7.16 at 24.71 degrees (North through East) ! Clean map min=-0.0089353 max=0.084102 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.04 HN 1.14 KP 1.02 ! LA 0.99 MK 1.27 NL 1.12 PT 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.72 FD 1.00 HN 1.16 KP 1.01 ! LA 1.03 MK 1.28 NL 0.52 PT 1.09 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.79 FD 1.00 HN 1.14 KP 1.14 ! LA 0.99 MK 1.29 NL 1.00 PT 1.01 ! ! ! Fit before self-cal, rms=0.114766Jy sigma=1.323413 ! Fit after self-cal, rms=0.081083Jy sigma=1.286070 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.625 mas, bmaj=7.212 mas, bpa=25.3 degrees ! Estimated noise=0.608509 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00463187 Jy ! Component: 100 - total flux cleaned = 0.00487434 Jy ! Component: 150 - total flux cleaned = 0.00505069 Jy ! Component: 200 - total flux cleaned = 0.00526992 Jy ! Total flux subtracted in 200 components = 0.00526992 Jy ! Clean residual min=-0.006137 max=0.004514 Jy/beam ! Clean residual mean=-0.000017 rms=0.001223 Jy/beam ! Combined flux in latest and established models = 0.125005 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 83 components and 0.125005 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.080798Jy sigma=1.279160 ! Fit after self-cal, rms=0.080642Jy sigma=1.276567 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.080642Jy sigma=1.276567 ! Fit after self-cal, rms=0.073043Jy sigma=1.234109 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.644 mas, bmaj=7.154 mas, bpa=23.75 degrees ! Estimated noise=0.604857 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00123677 Jy ! Component: 100 - total flux cleaned = 0.00144891 Jy ! Component: 150 - total flux cleaned = 0.00149846 Jy ! Component: 200 - total flux cleaned = 0.0015209 Jy ! Total flux subtracted in 200 components = 0.0015209 Jy ! Clean residual min=-0.002926 max=0.003647 Jy/beam ! Clean residual mean=-0.000012 rms=0.000787 Jy/beam ! Combined flux in latest and established models = 0.126526 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 96 components and 0.126526 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.073011Jy sigma=1.233724 ! Fit after self-cal, rms=0.073092Jy sigma=1.230834 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (56.5, -70). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0017294 Jy ! Component: 100 - total flux cleaned = 0.00119843 Jy ! Component: 150 - total flux cleaned = 0.00120003 Jy ! Component: 200 - total flux cleaned = 0.00115889 Jy ! Total flux subtracted in 200 components = 0.00115889 Jy ! Clean residual min=-0.002581 max=0.002897 Jy/beam ! Clean residual mean=-0.000014 rms=0.000709 Jy/beam ! Combined flux in latest and established models = 0.127685 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 113 components and 0.127685 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.072926Jy sigma=1.227693 ! Fit after self-cal, rms=0.072900Jy sigma=1.227363 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.072900Jy sigma=1.227363 ! Fit after self-cal, rms=0.073109Jy sigma=1.226894 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.598 mas, bmaj=7.121 mas, bpa=23.73 degrees ! Estimated noise=0.603122 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000880099 Jy ! Component: 100 - total flux cleaned = 0.000835138 Jy ! Component: 150 - total flux cleaned = 0.00094171 Jy ! Component: 200 - total flux cleaned = 0.00094167 Jy ! Total flux subtracted in 200 components = 0.00094167 Jy ! Clean residual min=-0.002365 max=0.002778 Jy/beam ! Clean residual mean=-0.000013 rms=0.000671 Jy/beam ! Combined flux in latest and established models = 0.128626 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 126 components and 0.128626 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.073060Jy sigma=1.226061 ! Fit after self-cal, rms=0.073075Jy sigma=1.225953 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000255801 Jy ! Component: 100 - total flux cleaned = 0.000109437 Jy ! Component: 150 - total flux cleaned = 3.05589e-05 Jy ! Component: 200 - total flux cleaned = -1.84596e-05 Jy ! Total flux subtracted in 200 components = -1.84596e-05 Jy ! Clean residual min=-0.002335 max=0.002754 Jy/beam ! Clean residual mean=-0.000012 rms=0.000664 Jy/beam ! Combined flux in latest and established models = 0.128608 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 137 components and 0.128608 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.073053Jy sigma=1.225597 ! Fit after self-cal, rms=0.073054Jy sigma=1.225567 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.073054Jy sigma=1.225567 ! Fit after self-cal, rms=0.073003Jy sigma=1.225429 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.439 mas, bmaj=9.003 mas, bpa=24.64 degrees ! Estimated noise=0.673132 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000295277 Jy ! Component: 100 - total flux cleaned = -0.000246311 Jy ! Component: 150 - total flux cleaned = -0.00023001 Jy ! Component: 200 - total flux cleaned = -0.000180637 Jy ! Total flux subtracted in 200 components = -0.000180637 Jy ! Clean residual min=-0.002311 max=0.002882 Jy/beam ! Clean residual mean=-0.000018 rms=0.000705 Jy/beam ! Combined flux in latest and established models = 0.128427 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 159 components and 0.128427 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.072990Jy sigma=1.225238 ! Fit after self-cal, rms=0.072989Jy sigma=1.225215 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.06206e-05 Jy ! Component: 100 - total flux cleaned = -1.03174e-05 Jy ! Component: 150 - total flux cleaned = 1.65937e-05 Jy ! Component: 200 - total flux cleaned = 4.15678e-05 Jy ! Total flux subtracted in 200 components = 4.15678e-05 Jy ! Clean residual min=-0.002285 max=0.002895 Jy/beam ! Clean residual mean=-0.000017 rms=0.000704 Jy/beam ! Combined flux in latest and established models = 0.128469 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 167 components and 0.128469 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.072984Jy sigma=1.225125 ! Fit after self-cal, rms=0.072985Jy sigma=1.225119 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=5.554 mas, bmaj=7.123 mas, bpa=23.76 degrees ! Estimated noise=0.602393 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.554 x 7.123 at 23.76 degrees (North through East) ! Clean map min=-0.0023911 max=0.084746 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.813 mas, bmaj=6.763 mas, bpa=24.59 degrees ! Estimated noise=0.74007 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0643355 Jy ! Component: 100 - total flux cleaned = 0.0872832 Jy ! Component: 150 - total flux cleaned = 0.100522 Jy ! Component: 200 - total flux cleaned = 0.108592 Jy ! Total flux subtracted in 200 components = 0.108592 Jy ! Clean residual min=-0.004839 max=0.005025 Jy/beam ! Clean residual mean=-0.000047 rms=0.001249 Jy/beam ! Combined flux in latest and established models = 0.108592 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 43 model components to the UV plane model. ! The established model now contains 43 components and 0.108592 Jy ! Inverting map and beam ! Estimated beam: bmin=5.554 mas, bmaj=7.123 mas, bpa=23.76 degrees ! Estimated noise=0.602393 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00776249 Jy ! Component: 100 - total flux cleaned = 0.0121928 Jy ! Component: 150 - total flux cleaned = 0.0150471 Jy ! Component: 200 - total flux cleaned = 0.016768 Jy ! Total flux subtracted in 200 components = 0.016768 Jy ! Clean residual min=-0.003184 max=0.003208 Jy/beam ! Clean residual mean=-0.000021 rms=0.000795 Jy/beam ! Combined flux in latest and established models = 0.12536 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 74 components and 0.12536 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.439 mas, bmaj=9.003 mas, bpa=24.64 degrees ! Estimated noise=0.673132 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00264856 Jy ! Component: 100 - total flux cleaned = 0.00302275 Jy ! Component: 150 - total flux cleaned = 0.00314075 Jy ! Component: 200 - total flux cleaned = 0.00323408 Jy ! Total flux subtracted in 200 components = 0.00323408 Jy ! Clean residual min=-0.002616 max=0.002814 Jy/beam ! Clean residual mean=-0.000021 rms=0.000735 Jy/beam ! Combined flux in latest and established models = 0.128594 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.87781e-06 Jy ! Component: 100 - total flux cleaned = -1.62684e-06 Jy ! Component: 150 - total flux cleaned = 2.33986e-05 Jy ! Component: 200 - total flux cleaned = 2.30385e-05 Jy ! Total flux subtracted in 200 components = 2.30385e-05 Jy ! Clean residual min=-0.002483 max=0.002900 Jy/beam ! Clean residual mean=-0.000019 rms=0.000719 Jy/beam ! Combined flux in latest and established models = 0.128617 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 107 components and 0.128617 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=5.554 mas, bmaj=7.123 mas, bpa=23.76 degrees ! Estimated noise=0.602393 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00075538 Jy ! Component: 100 - total flux cleaned = 0.000928835 Jy ! Component: 150 - total flux cleaned = 0.000928434 Jy ! Component: 200 - total flux cleaned = 0.000927792 Jy ! Total flux subtracted in 200 components = 0.000927792 Jy ! Clean residual min=-0.002325 max=0.002624 Jy/beam ! Clean residual mean=-0.000009 rms=0.000670 Jy/beam ! Combined flux in latest and established models = 0.129545 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 128 components and 0.129545 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.073025Jy sigma=1.225819 ! Fit after self-cal, rms=0.073008Jy sigma=1.225736 wmodel J2114+4634_S_b_map.mod ! Writing 128 model components to file: J2114+4634_S_b_map.mod wobs J2114+4634_S_b_uvs.fits ! Writing UV FITS file: J2114+4634_S_b_uvs.fits wwins J2114+4634_S_b_map.win ! wwins: Wrote 2 windows to J2114+4634_S_b_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000860748 Jy ! Component: 100 - total flux cleaned = 0.00123548 Jy ! Component: 150 - total flux cleaned = 0.00162591 Jy ! Component: 200 - total flux cleaned = 0.00181084 Jy ! Component: 250 - total flux cleaned = 0.00184516 Jy ! Component: 300 - total flux cleaned = 0.00184523 Jy ! Component: 350 - total flux cleaned = 0.00184734 Jy ! Component: 400 - total flux cleaned = 0.00190967 Jy ! Component: 450 - total flux cleaned = 0.00185131 Jy ! Component: 500 - total flux cleaned = 0.00165385 Jy ! Component: 550 - total flux cleaned = 0.0015447 Jy ! Component: 600 - total flux cleaned = 0.00143764 Jy ! Component: 650 - total flux cleaned = 0.00123216 Jy ! Component: 700 - total flux cleaned = 0.00110745 Jy ! Component: 750 - total flux cleaned = 0.00093819 Jy ! Component: 800 - total flux cleaned = 0.000867809 Jy ! Component: 850 - total flux cleaned = 0.000684345 Jy ! Component: 900 - total flux cleaned = 0.000528674 Jy ! Component: 950 - total flux cleaned = 0.000398711 Jy ! Component: 1000 - total flux cleaned = 0.000272119 Jy ! Component: 1050 - total flux cleaned = 0.000128038 Jy ! Component: 1100 - total flux cleaned = 7.24212e-06 Jy ! Component: 1150 - total flux cleaned = -7.19843e-05 Jy ! Component: 1200 - total flux cleaned = -0.00020727 Jy ! Component: 1250 - total flux cleaned = -0.000264244 Jy ! Component: 1300 - total flux cleaned = -0.000338549 Jy ! Component: 1350 - total flux cleaned = -0.000338324 Jy ! Component: 1400 - total flux cleaned = -0.000392299 Jy ! Component: 1450 - total flux cleaned = -0.000426974 Jy ! Component: 1500 - total flux cleaned = -0.000461729 Jy ! Component: 1550 - total flux cleaned = -0.000546263 Jy ! Component: 1600 - total flux cleaned = -0.000596429 Jy ! Component: 1650 - total flux cleaned = -0.000678747 Jy ! Component: 1700 - total flux cleaned = -0.000775886 Jy ! Component: 1750 - total flux cleaned = -0.000807752 Jy ! Component: 1800 - total flux cleaned = -0.000870562 Jy ! Component: 1850 - total flux cleaned = -0.0009323 Jy ! Component: 1900 - total flux cleaned = -0.000932378 Jy ! Component: 1950 - total flux cleaned = -0.000977712 Jy ! Component: 2000 - total flux cleaned = -0.00108194 Jy ! Component: 2050 - total flux cleaned = -0.00106713 Jy ! Component: 2100 - total flux cleaned = -0.00115458 Jy ! Component: 2150 - total flux cleaned = -0.00116894 Jy ! Component: 2200 - total flux cleaned = -0.00116893 Jy ! Component: 2250 - total flux cleaned = -0.00121098 Jy ! Component: 2300 - total flux cleaned = -0.00116907 Jy ! Component: 2350 - total flux cleaned = -0.00115521 Jy ! Component: 2400 - total flux cleaned = -0.00110055 Jy ! Component: 2450 - total flux cleaned = -0.0011004 Jy ! Component: 2500 - total flux cleaned = -0.0010872 Jy ! Component: 2550 - total flux cleaned = -0.0011404 Jy ! Component: 2600 - total flux cleaned = -0.00111416 Jy ! Component: 2650 - total flux cleaned = -0.00115337 Jy ! Component: 2700 - total flux cleaned = -0.00115333 Jy ! Component: 2750 - total flux cleaned = -0.00116621 Jy ! Component: 2800 - total flux cleaned = -0.00115337 Jy ! Component: 2850 - total flux cleaned = -0.00115343 Jy ! Component: 2900 - total flux cleaned = -0.00115344 Jy ! Component: 2950 - total flux cleaned = -0.00115347 Jy ! Component: 3000 - total flux cleaned = -0.0011659 Jy ! Component: 3050 - total flux cleaned = -0.00120273 Jy ! Component: 3100 - total flux cleaned = -0.00116587 Jy ! Component: 3150 - total flux cleaned = -0.00119006 Jy ! Component: 3200 - total flux cleaned = -0.00114166 Jy ! Component: 3250 - total flux cleaned = -0.00115372 Jy ! Component: 3300 - total flux cleaned = -0.00116557 Jy ! Component: 3350 - total flux cleaned = -0.00112978 Jy ! Component: 3400 - total flux cleaned = -0.00111788 Jy ! Component: 3450 - total flux cleaned = -0.00109433 Jy ! Component: 3500 - total flux cleaned = -0.00107093 Jy ! Component: 3550 - total flux cleaned = -0.00105926 Jy ! Component: 3600 - total flux cleaned = -0.00103609 Jy ! Component: 3650 - total flux cleaned = -0.00101296 Jy ! Component: 3700 - total flux cleaned = -0.000978353 Jy ! Component: 3750 - total flux cleaned = -0.000966903 Jy ! Component: 3800 - total flux cleaned = -0.000955443 Jy ! Component: 3850 - total flux cleaned = -0.000921299 Jy ! Component: 3900 - total flux cleaned = -0.000909976 Jy ! Component: 3950 - total flux cleaned = -0.000887423 Jy ! Component: 4000 - total flux cleaned = -0.000876145 Jy ! Component: 4050 - total flux cleaned = -0.00087607 Jy ! Total flux subtracted in 4096 components = -0.000853743 Jy ! Clean residual min=-0.000684 max=0.000731 Jy/beam ! Clean residual mean=-0.000003 rms=0.000196 Jy/beam ! Combined flux in latest and established models = 0.128691 Jy keep ! Adding 271 model components to the UV plane model. ! The established model now contains 399 components and 0.128691 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J2114+4634_S_b_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.554 x 7.123 at 23.76 degrees (North through East) ! Clean map min=-0.0019123 max=0.085354 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J2114+4634_S_b_map.fits wmodel /vlbi/uf001/uva//J2114+4634_S_b_map.mod ! Writing 399 model components to file: /vlbi/uf001/uva//J2114+4634_S_b_map.mod wobs /vlbi/uf001/uva//J2114+4634_S_b_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J2114+4634_S_b_uvs.fits wwins /vlbi/uf001/uva//J2114+4634_S_b_map.win ! wwins: Wrote 3 windows to /vlbi/uf001/uva//J2114+4634_S_b_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0853543 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000191872 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.674384 0.674384 1.34877 2.69754 5.39507 10.7901 21.5803 43.1606 86.3212 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.085 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 444.85 quit ! Quitting program ! Log file /vlbi/uf001/uva//J2114+4634_S_b_dfm.log closed on Mon Jan 14 05:47:16 2019