! Started logfile: /vlbi/uf001/uvm//J2113+1121_S_a_dfm.log on Sun Jan 13 22:31:50 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uvm//J2113+1121_S_a_uvm.fits
! Reading UV FITS file: /vlbi/uf001/uvm//J2113+1121_S_a_uvm.fits
! AN table 1: 57 integrations on 21 of 21 possible baselines.
! AN table 2: 74 integrations on 28 of 28 possible baselines.
! Apparent sampling: 0.963903 visibilities/baseline/integration-bin.
! Found source: J2113+1121
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 9453 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J2113+1121_S_a]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 40 telescope corrections were flagged in sub-array 1.
!  A total of 16 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 40 telescope corrections were flagged in sub-array 1.
!  A total of 16 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 40 telescope corrections were flagged in sub-array 1.
!  A total of 16 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.004006Jy  sigma=22.205300
! Fit after  self-cal, rms=0.930932Jy  sigma=20.699778
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.432 mas, bmaj=13.19 mas, bpa=-19.84 degrees
! Estimated noise=0.524612 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0527348 Jy
! Component: 100  -  total flux cleaned = 0.0642348 Jy
! Total flux subtracted in 100 components = 0.0642348 Jy
! Clean residual min=-0.004080 max=0.004214 Jy/beam
! Clean residual mean=-0.000001 rms=0.001017 Jy/beam
! Combined flux in latest and established models = 0.0642348 Jy
! Performing phase self-cal
! Adding 2 model components to the UV plane model.
! The established model now contains 2 components and 0.0642348 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.078884Jy  sigma=1.251876
! Fit after  self-cal, rms=0.078681Jy  sigma=1.247191
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.879 mas, bmaj=13.47 mas, bpa=-19.57 degrees
! Estimated noise=0.347135 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00552246 Jy
! Component: 100  -  total flux cleaned = 0.00708175 Jy
! Component: 150  -  total flux cleaned = 0.00748066 Jy
! Component: 200  -  total flux cleaned = 0.00753286 Jy
! Total flux subtracted in 200 components = 0.00753286 Jy
! Clean residual min=-0.003149 max=0.002660 Jy/beam
! Clean residual mean=-0.000004 rms=0.000715 Jy/beam
! Combined flux in latest and established models = 0.0717677 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 19 components and 0.0717677 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.078165Jy  sigma=1.238049
! Fit after  self-cal, rms=0.078139Jy  sigma=1.237907
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.879 x 13.47 at -19.57 degrees (North through East)
! Clean map  min=-0.0031427  max=0.070909 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.16     HN        1.07     KP        1.04     LA        1.04     
!   NL        1.14     OV        1.07     PT        1.06     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.96     FD        0.90     HN        1.03     KP        0.87     
!   LA        0.93     MK        1.02     NL        1.03     OV        0.95     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.15     HN        1.07     KP        1.16     LA        0.95     
!   NL        1.14     OV        0.98     PT        1.06     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.88     FD        0.93     HN        0.97     KP        0.88     
!   LA        0.95     MK        1.04     NL        0.93     OV        0.95     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.19     HN        1.05     KP        1.06     LA        1.04     
!   NL        1.14     OV        1.07     PT        1.08     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.97     FD        0.95     HN        1.03     KP        0.89     
!   LA        0.90     MK        1.06     NL        0.96     OV        0.99     
! 
! 
! Fit before self-cal, rms=0.078139Jy  sigma=1.237907
! Fit after  self-cal, rms=0.072649Jy  sigma=1.218480
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.897 mas, bmaj=13.23 mas, bpa=-19.45 degrees
! Estimated noise=0.345456 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.35224e-05 Jy
! Component: 100  -  total flux cleaned = 0.000199107 Jy
! Component: 150  -  total flux cleaned = 0.000308348 Jy
! Component: 200  -  total flux cleaned = 0.000374498 Jy
! Total flux subtracted in 200 components = 0.000374498 Jy
! Clean residual min=-0.001637 max=0.001893 Jy/beam
! Clean residual mean=0.000003 rms=0.000469 Jy/beam
! Combined flux in latest and established models = 0.0721422 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 32 components and 0.0721422 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.072624Jy  sigma=1.217687
! Fit after  self-cal, rms=0.072626Jy  sigma=1.217332
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.072626Jy  sigma=1.217332
! Fit after  self-cal, rms=0.068131Jy  sigma=1.209356
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.902 mas, bmaj=13.18 mas, bpa=-19.4 degrees
! Estimated noise=0.345705 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000369651 Jy
! Component: 100  -  total flux cleaned = 0.000467999 Jy
! Component: 150  -  total flux cleaned = 0.00052982 Jy
! Component: 200  -  total flux cleaned = 0.000570156 Jy
! Total flux subtracted in 200 components = 0.000570156 Jy
! Clean residual min=-0.001420 max=0.001694 Jy/beam
! Clean residual mean=0.000001 rms=0.000361 Jy/beam
! Combined flux in latest and established models = 0.0727124 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 46 components and 0.0727124 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068121Jy  sigma=1.209126
! Fit after  self-cal, rms=0.068123Jy  sigma=1.208814
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (109.5, -121.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000652629 Jy
! Component: 100  -  total flux cleaned = 0.00050755 Jy
! Component: 150  -  total flux cleaned = 0.000427782 Jy
! Component: 200  -  total flux cleaned = 0.000250362 Jy
! Total flux subtracted in 200 components = 0.000250362 Jy
! Clean residual min=-0.001266 max=0.001368 Jy/beam
! Clean residual mean=0.000000 rms=0.000343 Jy/beam
! Combined flux in latest and established models = 0.0729627 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 64 components and 0.0729627 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068078Jy  sigma=1.207848
! Fit after  self-cal, rms=0.068067Jy  sigma=1.207740
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068067Jy  sigma=1.207740
! Fit after  self-cal, rms=0.068257Jy  sigma=1.206955
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.898 mas, bmaj=13.14 mas, bpa=-19.42 degrees
! Estimated noise=0.344991 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00019466 Jy
! Component: 100  -  total flux cleaned = -0.000238611 Jy
! Component: 150  -  total flux cleaned = -0.00031516 Jy
! Component: 200  -  total flux cleaned = -0.000365899 Jy
! Total flux subtracted in 200 components = -0.000365899 Jy
! Clean residual min=-0.001249 max=0.001360 Jy/beam
! Clean residual mean=0.000000 rms=0.000322 Jy/beam
! Combined flux in latest and established models = 0.0725968 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 73 components and 0.0725968 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068242Jy  sigma=1.206700
! Fit after  self-cal, rms=0.068256Jy  sigma=1.206635
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (67, -45).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000931171 Jy
! Component: 100  -  total flux cleaned = 0.000825667 Jy
! Component: 150  -  total flux cleaned = 0.000825124 Jy
! Component: 200  -  total flux cleaned = 0.000785943 Jy
! Total flux subtracted in 200 components = 0.000785943 Jy
! Clean residual min=-0.001238 max=0.001096 Jy/beam
! Clean residual mean=-0.000001 rms=0.000301 Jy/beam
! Combined flux in latest and established models = 0.0733828 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 99 components and 0.0733828 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068227Jy  sigma=1.206051
! Fit after  self-cal, rms=0.068221Jy  sigma=1.205976
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068221Jy  sigma=1.205976
! Fit after  self-cal, rms=0.068387Jy  sigma=1.205931
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.482 mas, bmaj=13.79 mas, bpa=-17.88 degrees
! Estimated noise=0.404146 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000565062 Jy
! Component: 100  -  total flux cleaned = 0.000567658 Jy
! Component: 150  -  total flux cleaned = 0.000570008 Jy
! Component: 200  -  total flux cleaned = 0.000505903 Jy
! Total flux subtracted in 200 components = 0.000505903 Jy
! Clean residual min=-0.001169 max=0.001161 Jy/beam
! Clean residual mean=-0.000001 rms=0.000345 Jy/beam
! Combined flux in latest and established models = 0.0738887 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 115 components and 0.0738887 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068374Jy  sigma=1.205752
! Fit after  self-cal, rms=0.068374Jy  sigma=1.205721
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000158779 Jy
! Component: 100  -  total flux cleaned = 9.6922e-05 Jy
! Component: 150  -  total flux cleaned = 7.00601e-05 Jy
! Component: 200  -  total flux cleaned = 4.40785e-05 Jy
! Total flux subtracted in 200 components = 4.40785e-05 Jy
! Clean residual min=-0.001109 max=0.001117 Jy/beam
! Clean residual mean=-0.000001 rms=0.000336 Jy/beam
! Combined flux in latest and established models = 0.0739328 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 129 components and 0.0739328 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068368Jy  sigma=1.205634
! Fit after  self-cal, rms=0.068366Jy  sigma=1.205626
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.9 mas, bmaj=13.13 mas, bpa=-19.42 degrees
! Estimated noise=0.344943 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.9 x 13.13 at -19.42 degrees (North through East)
! Clean map  min=-0.0012668  max=0.070594 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.404 mas, bmaj=12.92 mas, bpa=-19.66 degrees
! Estimated noise=0.543417 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0547475 Jy
! Component: 100  -  total flux cleaned = 0.0667386 Jy
! Component: 150  -  total flux cleaned = 0.0692282 Jy
! Component: 200  -  total flux cleaned = 0.0702098 Jy
! Total flux subtracted in 200 components = 0.0702098 Jy
! Clean residual min=-0.002423 max=0.002676 Jy/beam
! Clean residual mean=0.000001 rms=0.000667 Jy/beam
! Combined flux in latest and established models = 0.0702099 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 21 model components to the UV plane model.
! The established model now contains 21 components and 0.0702099 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.9 mas, bmaj=13.13 mas, bpa=-19.42 degrees
! Estimated noise=0.344943 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0021762 Jy
! Component: 100  -  total flux cleaned = 0.00313647 Jy
! Component: 150  -  total flux cleaned = 0.00377428 Jy
! Component: 200  -  total flux cleaned = 0.00406996 Jy
! Total flux subtracted in 200 components = 0.00406996 Jy
! Clean residual min=-0.001537 max=0.001211 Jy/beam
! Clean residual mean=-0.000001 rms=0.000350 Jy/beam
! Combined flux in latest and established models = 0.0742798 Jy
! Adding 30 model components to the UV plane model.
! The established model now contains 51 components and 0.0742798 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.482 mas, bmaj=13.79 mas, bpa=-17.88 degrees
! Estimated noise=0.404146 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000680485 Jy
! Component: 100  -  total flux cleaned = 0.00078419 Jy
! Component: 150  -  total flux cleaned = 0.000784936 Jy
! Component: 200  -  total flux cleaned = 0.000732797 Jy
! Total flux subtracted in 200 components = 0.000732797 Jy
! Clean residual min=-0.001252 max=0.001219 Jy/beam
! Clean residual mean=-0.000002 rms=0.000362 Jy/beam
! Combined flux in latest and established models = 0.0750126 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.34475e-05 Jy
! Component: 100  -  total flux cleaned = -0.00011301 Jy
! Component: 150  -  total flux cleaned = -0.000195764 Jy
! Component: 200  -  total flux cleaned = -0.000310596 Jy
! Total flux subtracted in 200 components = -0.000310596 Jy
! Clean residual min=-0.001222 max=0.001145 Jy/beam
! Clean residual mean=-0.000002 rms=0.000349 Jy/beam
! Combined flux in latest and established models = 0.074702 Jy
! Adding 44 model components to the UV plane model.
! The established model now contains 91 components and 0.074702 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.9 mas, bmaj=13.13 mas, bpa=-19.42 degrees
! Estimated noise=0.344943 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000156173 Jy
! Component: 100  -  total flux cleaned = -0.000207915 Jy
! Component: 150  -  total flux cleaned = -0.000299985 Jy
! Component: 200  -  total flux cleaned = -0.000429422 Jy
! Total flux subtracted in 200 components = -0.000429422 Jy
! Clean residual min=-0.001349 max=0.001110 Jy/beam
! Clean residual mean=-0.000001 rms=0.000302 Jy/beam
! Combined flux in latest and established models = 0.0742726 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 114 components and 0.0742726 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068385Jy  sigma=1.205990
! Fit after  self-cal, rms=0.068383Jy  sigma=1.205904
wmodel J2113+1121_S_a_map.mod
! Writing 114 model components to file: J2113+1121_S_a_map.mod
wobs   J2113+1121_S_a_uvs.fits
! Writing UV FITS file: J2113+1121_S_a_uvs.fits
wwins  J2113+1121_S_a_map.win
! wwins: Wrote 3 windows to J2113+1121_S_a_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000345625 Jy
! Component: 100  -  total flux cleaned = -0.000461772 Jy
! Component: 150  -  total flux cleaned = -0.000516261 Jy
! Component: 200  -  total flux cleaned = -0.00060358 Jy
! Component: 250  -  total flux cleaned = -0.000603214 Jy
! Component: 300  -  total flux cleaned = -0.000619537 Jy
! Component: 350  -  total flux cleaned = -0.000556272 Jy
! Component: 400  -  total flux cleaned = -0.000525516 Jy
! Component: 450  -  total flux cleaned = -0.000495211 Jy
! Component: 500  -  total flux cleaned = -0.000465525 Jy
! Component: 550  -  total flux cleaned = -0.000494547 Jy
! Component: 600  -  total flux cleaned = -0.000437573 Jy
! Component: 650  -  total flux cleaned = -0.000423729 Jy
! Component: 700  -  total flux cleaned = -0.000437393 Jy
! Component: 750  -  total flux cleaned = -0.000382928 Jy
! Component: 800  -  total flux cleaned = -0.000329531 Jy
! Component: 850  -  total flux cleaned = -0.000303445 Jy
! Component: 900  -  total flux cleaned = -0.000277493 Jy
! Component: 950  -  total flux cleaned = -0.000264527 Jy
! Component: 1000  -  total flux cleaned = -0.000251929 Jy
! Component: 1050  -  total flux cleaned = -0.000264156 Jy
! Component: 1100  -  total flux cleaned = -0.000264026 Jy
! Component: 1150  -  total flux cleaned = -0.00025167 Jy
! Component: 1200  -  total flux cleaned = -0.000179398 Jy
! Component: 1250  -  total flux cleaned = -0.000191251 Jy
! Component: 1300  -  total flux cleaned = -0.000167722 Jy
! Component: 1350  -  total flux cleaned = -0.000156185 Jy
! Component: 1400  -  total flux cleaned = -0.000133285 Jy
! Component: 1450  -  total flux cleaned = -0.00011063 Jy
! Component: 1500  -  total flux cleaned = -0.000110686 Jy
! Component: 1550  -  total flux cleaned = -0.00012187 Jy
! Component: 1600  -  total flux cleaned = -8.87186e-05 Jy
! Component: 1650  -  total flux cleaned = -6.69084e-05 Jy
! Component: 1700  -  total flux cleaned = -7.77436e-05 Jy
! Component: 1750  -  total flux cleaned = -4.5425e-05 Jy
! Component: 1800  -  total flux cleaned = -4.52726e-05 Jy
! Component: 1850  -  total flux cleaned = -1.34895e-05 Jy
! Component: 1900  -  total flux cleaned = 7.32829e-06 Jy
! Component: 1950  -  total flux cleaned = 4.8749e-05 Jy
! Component: 2000  -  total flux cleaned = 6.91277e-05 Jy
! Component: 2050  -  total flux cleaned = 9.95776e-05 Jy
! Component: 2100  -  total flux cleaned = 0.000119745 Jy
! Component: 2150  -  total flux cleaned = 0.000139702 Jy
! Component: 2200  -  total flux cleaned = 0.000179291 Jy
! Component: 2250  -  total flux cleaned = 0.000149806 Jy
! Component: 2300  -  total flux cleaned = 0.000188829 Jy
! Component: 2350  -  total flux cleaned = 0.000208117 Jy
! Component: 2400  -  total flux cleaned = 0.000207981 Jy
! Component: 2450  -  total flux cleaned = 0.000245953 Jy
! Component: 2500  -  total flux cleaned = 0.000264839 Jy
! Component: 2550  -  total flux cleaned = 0.000264755 Jy
! Component: 2600  -  total flux cleaned = 0.000292668 Jy
! Component: 2650  -  total flux cleaned = 0.000366348 Jy
! Component: 2700  -  total flux cleaned = 0.000375365 Jy
! Component: 2750  -  total flux cleaned = 0.000393563 Jy
! Component: 2800  -  total flux cleaned = 0.000384733 Jy
! Component: 2850  -  total flux cleaned = 0.000429652 Jy
! Component: 2900  -  total flux cleaned = 0.000456359 Jy
! Component: 2950  -  total flux cleaned = 0.000474058 Jy
! Component: 3000  -  total flux cleaned = 0.000509179 Jy
! Component: 3050  -  total flux cleaned = 0.000526617 Jy
! Component: 3100  -  total flux cleaned = 0.000526597 Jy
! Component: 3150  -  total flux cleaned = 0.000595405 Jy
! Component: 3200  -  total flux cleaned = 0.000595339 Jy
! Component: 3250  -  total flux cleaned = 0.000569903 Jy
! Component: 3300  -  total flux cleaned = 0.000603767 Jy
! Component: 3350  -  total flux cleaned = 0.000637354 Jy
! Component: 3400  -  total flux cleaned = 0.000662386 Jy
! Component: 3450  -  total flux cleaned = 0.000703931 Jy
! Component: 3500  -  total flux cleaned = 0.000712077 Jy
! Component: 3550  -  total flux cleaned = 0.000728464 Jy
! Component: 3600  -  total flux cleaned = 0.000736598 Jy
! Component: 3650  -  total flux cleaned = 0.000760882 Jy
! Component: 3700  -  total flux cleaned = 0.000768979 Jy
! Component: 3750  -  total flux cleaned = 0.000825221 Jy
! Component: 3800  -  total flux cleaned = 0.000817234 Jy
! Component: 3850  -  total flux cleaned = 0.000841158 Jy
! Component: 3900  -  total flux cleaned = 0.000849085 Jy
! Component: 3950  -  total flux cleaned = 0.000849121 Jy
! Component: 4000  -  total flux cleaned = 0.000849186 Jy
! Component: 4050  -  total flux cleaned = 0.000880409 Jy
! Total flux subtracted in 4096 components = 0.000895959 Jy
! Clean residual min=-0.000592 max=0.000445 Jy/beam
! Clean residual mean=-0.000001 rms=0.000149 Jy/beam
! Combined flux in latest and established models = 0.0751685 Jy
keep
! Adding 272 model components to the UV plane model.
! The established model now contains 386 components and 0.0751685 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uvm//J2113+1121_S_a_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.9 x 13.13 at -19.42 degrees (North through East)
! Clean map  min=-0.0010228  max=0.070333 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uvm//J2113+1121_S_a_map.fits
wmodel /vlbi/uf001/uvm//J2113+1121_S_a_map.mod
! Writing 386 model components to file: /vlbi/uf001/uvm//J2113+1121_S_a_map.mod
wobs   /vlbi/uf001/uvm//J2113+1121_S_a_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uvm//J2113+1121_S_a_uvs.fits
wwins  /vlbi/uf001/uvm//J2113+1121_S_a_map.win
! wwins: Wrote 4 windows to /vlbi/uf001/uvm//J2113+1121_S_a_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0703334 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000147272 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.628172 0.628172 1.25634 2.51269 5.02538 10.0508 20.1015 40.203 80.4061
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0004 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.07 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  477.575 
quit
! Quitting program
! Log file /vlbi/uf001/uvm//J2113+1121_S_a_dfm.log closed on Sun Jan 13 22:31:55 2019