! Started logfile: /vlbi/uf001/uva//J2109-4110_S_b_dfm.log on Mon Jan 14 05:46:12 2019 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /vlbi/uf001/uva//J2109-4110_S_b_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J2109-4110_S_b_uva.fits ! AN table 1: 14 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.637755 visibilities/baseline/integration-bin. ! Found source: J2109-4110 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 44 lines of history. ! ! Reading 750 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J2109-4110_S_b] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 62 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 62 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 62 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.187910Jy sigma=12.492590 ! Fit after self-cal, rms=0.638275Jy sigma=6.167994 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.367 mas, bmaj=5.923 mas, bpa=-2.48 degrees ! Estimated noise=3.96325 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.332832 Jy ! Component: 100 - total flux cleaned = 0.460796 Jy ! Total flux subtracted in 100 components = 0.460796 Jy ! Clean residual min=-0.063985 max=0.115001 Jy/beam ! Clean residual mean=-0.000428 rms=0.021476 Jy/beam ! Combined flux in latest and established models = 0.460796 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.460796 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.314594Jy sigma=3.295577 ! Fit after self-cal, rms=0.314199Jy sigma=3.290933 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.728 mas, bmaj=6.638 mas, bpa=-0.8906 degrees ! Estimated noise=3.45496 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.124919 Jy ! Component: 100 - total flux cleaned = 0.196007 Jy ! Component: 150 - total flux cleaned = 0.238752 Jy ! Component: 200 - total flux cleaned = 0.264679 Jy ! Total flux subtracted in 200 components = 0.264679 Jy ! Clean residual min=-0.070067 max=0.114894 Jy/beam ! Clean residual mean=-0.000087 rms=0.023813 Jy/beam ! Combined flux in latest and established models = 0.725475 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 20 components and 0.725475 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.279081Jy sigma=2.562127 ! Fit after self-cal, rms=0.278430Jy sigma=2.557587 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.728 x 6.638 at -0.8906 degrees (North through East) ! Clean map min=-0.069034 max=0.43277 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! HN 3.45 KP 0.84 LA 0.83 MK 1.02 ! NL 1.97 OV 0.94 PT 0.85 SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! HN 3.85 KP 0.84 LA 0.87 MK 1.04 ! NL 2.05 OV 0.79 PT 0.82 SC 0.95 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! HN 2.85 KP 0.85 LA 0.86 MK 1.04 ! NL 1.78 OV 0.92 PT 0.87 SC 0.94 ! ! ! Fit before self-cal, rms=0.278430Jy sigma=2.557587 ! Fit after self-cal, rms=0.314802Jy sigma=1.519052 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.741 mas, bmaj=6.577 mas, bpa=1.552 degrees ! Estimated noise=3.48137 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (10, -23). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0462997 Jy ! Component: 100 - total flux cleaned = 0.0486591 Jy ! Component: 150 - total flux cleaned = 0.0486601 Jy ! Component: 200 - total flux cleaned = 0.0480887 Jy ! Total flux subtracted in 200 components = 0.0480887 Jy ! Clean residual min=-0.026308 max=0.032146 Jy/beam ! Clean residual mean=-0.000079 rms=0.007074 Jy/beam ! Combined flux in latest and established models = 0.773563 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 33 components and 0.773563 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.303884Jy sigma=1.352094 ! Fit after self-cal, rms=0.306761Jy sigma=1.333402 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.306761Jy sigma=1.333402 ! Fit after self-cal, rms=0.296995Jy sigma=1.316595 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.708 mas, bmaj=6.503 mas, bpa=1.262 degrees ! Estimated noise=3.38399 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0108961 Jy ! Component: 100 - total flux cleaned = 0.0119891 Jy ! Component: 150 - total flux cleaned = 0.0115432 Jy ! Component: 200 - total flux cleaned = 0.0119141 Jy ! Total flux subtracted in 200 components = 0.0119141 Jy ! Clean residual min=-0.023525 max=0.025011 Jy/beam ! Clean residual mean=-0.000099 rms=0.006040 Jy/beam ! Combined flux in latest and established models = 0.785477 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 48 components and 0.785477 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.293451Jy sigma=1.285170 ! Fit after self-cal, rms=0.293656Jy sigma=1.278626 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00182628 Jy ! Component: 100 - total flux cleaned = 0.00291112 Jy ! Component: 150 - total flux cleaned = 0.00322021 Jy ! Component: 200 - total flux cleaned = 0.00352145 Jy ! Total flux subtracted in 200 components = 0.00352145 Jy ! Clean residual min=-0.023403 max=0.024187 Jy/beam ! Clean residual mean=-0.000096 rms=0.005804 Jy/beam ! Combined flux in latest and established models = 0.788999 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 58 components and 0.788999 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.291745Jy sigma=1.268061 ! Fit after self-cal, rms=0.292088Jy sigma=1.265265 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.292088Jy sigma=1.265265 ! Fit after self-cal, rms=0.278266Jy sigma=1.231827 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.689 mas, bmaj=6.492 mas, bpa=0.8027 degrees ! Estimated noise=3.33737 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00570825 Jy ! Component: 100 - total flux cleaned = 0.00690446 Jy ! Component: 150 - total flux cleaned = 0.00770201 Jy ! Component: 200 - total flux cleaned = 0.00840528 Jy ! Total flux subtracted in 200 components = 0.00840528 Jy ! Clean residual min=-0.018058 max=0.019499 Jy/beam ! Clean residual mean=-0.000039 rms=0.004679 Jy/beam ! Combined flux in latest and established models = 0.797404 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 67 components and 0.797404 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.277100Jy sigma=1.220801 ! Fit after self-cal, rms=0.276931Jy sigma=1.218417 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00181917 Jy ! Component: 100 - total flux cleaned = 0.00252185 Jy ! Component: 150 - total flux cleaned = 0.00294568 Jy ! Component: 200 - total flux cleaned = 0.00352327 Jy ! Total flux subtracted in 200 components = 0.00352327 Jy ! Clean residual min=-0.018259 max=0.019109 Jy/beam ! Clean residual mean=-0.000035 rms=0.004558 Jy/beam ! Combined flux in latest and established models = 0.800928 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 71 components and 0.800928 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.276217Jy sigma=1.213491 ! Fit after self-cal, rms=0.276250Jy sigma=1.212383 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.276250Jy sigma=1.212383 ! Fit after self-cal, rms=0.269647Jy sigma=1.210017 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.786 mas, bmaj=21.44 mas, bpa=1.848 degrees ! Estimated noise=4.66632 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00370193 Jy ! Component: 100 - total flux cleaned = 0.00454616 Jy ! Component: 150 - total flux cleaned = 0.00523142 Jy ! Component: 200 - total flux cleaned = 0.00541749 Jy ! Total flux subtracted in 200 components = 0.00541749 Jy ! Clean residual min=-0.021880 max=0.026035 Jy/beam ! Clean residual mean=-0.000060 rms=0.007100 Jy/beam ! Combined flux in latest and established models = 0.806345 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 80 components and 0.806345 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.269506Jy sigma=1.213377 ! Fit after self-cal, rms=0.269228Jy sigma=1.207444 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000175257 Jy ! Component: 100 - total flux cleaned = 0.000764094 Jy ! Component: 150 - total flux cleaned = 0.000948859 Jy ! Component: 200 - total flux cleaned = 0.00111102 Jy ! Total flux subtracted in 200 components = 0.00111102 Jy ! Clean residual min=-0.022075 max=0.025962 Jy/beam ! Clean residual mean=-0.000060 rms=0.007060 Jy/beam ! Combined flux in latest and established models = 0.807456 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 85 components and 0.807456 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.269211Jy sigma=1.213458 ! Fit after self-cal, rms=0.269133Jy sigma=1.210489 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=2.686 mas, bmaj=6.47 mas, bpa=0.6465 degrees ! Estimated noise=3.31835 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.686 x 6.47 at 0.6465 degrees (North through East) ! Clean map min=-0.029961 max=0.43154 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.33 mas, bmaj=5.768 mas, bpa=-0.5242 degrees ! Estimated noise=3.93486 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.332309 Jy ! Component: 100 - total flux cleaned = 0.465674 Jy ! Component: 150 - total flux cleaned = 0.5516 Jy ! Component: 200 - total flux cleaned = 0.611983 Jy ! Total flux subtracted in 200 components = 0.611983 Jy ! Clean residual min=-0.032183 max=0.045129 Jy/beam ! Clean residual mean=-0.000205 rms=0.009101 Jy/beam ! Combined flux in latest and established models = 0.611983 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.611983 Jy ! Inverting map and beam ! Estimated beam: bmin=2.686 mas, bmaj=6.47 mas, bpa=0.6465 degrees ! Estimated noise=3.31835 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3.5, -1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0637008 Jy ! Component: 100 - total flux cleaned = 0.101584 Jy ! Component: 150 - total flux cleaned = 0.128074 Jy ! Component: 200 - total flux cleaned = 0.147248 Jy ! Total flux subtracted in 200 components = 0.147248 Jy ! Clean residual min=-0.020375 max=0.017934 Jy/beam ! Clean residual mean=-0.000042 rms=0.005229 Jy/beam ! Combined flux in latest and established models = 0.759231 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 62 components and 0.759231 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.786 mas, bmaj=21.44 mas, bpa=1.848 degrees ! Estimated noise=4.66632 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0252867 Jy ! Component: 100 - total flux cleaned = 0.0381684 Jy ! Component: 150 - total flux cleaned = 0.0436934 Jy ! Component: 200 - total flux cleaned = 0.0445447 Jy ! Total flux subtracted in 200 components = 0.0445447 Jy ! Clean residual min=-0.021367 max=0.023383 Jy/beam ! Clean residual mean=-0.000069 rms=0.006855 Jy/beam ! Combined flux in latest and established models = 0.803776 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000761792 Jy ! Component: 100 - total flux cleaned = 0.00143928 Jy ! Component: 150 - total flux cleaned = 0.0020531 Jy ! Component: 200 - total flux cleaned = 0.00260625 Jy ! Total flux subtracted in 200 components = 0.00260625 Jy ! Clean residual min=-0.020123 max=0.022751 Jy/beam ! Clean residual mean=-0.000068 rms=0.006740 Jy/beam ! Combined flux in latest and established models = 0.806382 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 93 components and 0.806382 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.686 mas, bmaj=6.47 mas, bpa=0.6465 degrees ! Estimated noise=3.31835 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000314624 Jy ! Component: 100 - total flux cleaned = 0.000647618 Jy ! Component: 150 - total flux cleaned = 0.00036717 Jy ! Component: 200 - total flux cleaned = 0.000123636 Jy ! Total flux subtracted in 200 components = 0.000123636 Jy ! Clean residual min=-0.017293 max=0.016654 Jy/beam ! Clean residual mean=-0.000026 rms=0.004191 Jy/beam ! Combined flux in latest and established models = 0.806506 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 99 components and 0.806506 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.270032Jy sigma=1.199688 ! Fit after self-cal, rms=0.270347Jy sigma=1.195227 wmodel J2109-4110_S_b_map.mod ! Writing 99 model components to file: J2109-4110_S_b_map.mod wobs J2109-4110_S_b_uvs.fits ! Writing UV FITS file: J2109-4110_S_b_uvs.fits wwins J2109-4110_S_b_map.win ! wwins: Wrote 3 windows to J2109-4110_S_b_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00329679 Jy ! Component: 100 - total flux cleaned = 0.00676892 Jy ! Component: 150 - total flux cleaned = 0.00845715 Jy ! Component: 200 - total flux cleaned = 0.00867837 Jy ! Component: 250 - total flux cleaned = 0.00784846 Jy ! Component: 300 - total flux cleaned = 0.00726658 Jy ! Component: 350 - total flux cleaned = 0.00763651 Jy ! Component: 400 - total flux cleaned = 0.00816993 Jy ! Component: 450 - total flux cleaned = 0.00951965 Jy ! Component: 500 - total flux cleaned = 0.00968049 Jy ! Component: 550 - total flux cleaned = 0.00952333 Jy ! Component: 600 - total flux cleaned = 0.00952788 Jy ! Component: 650 - total flux cleaned = 0.0107086 Jy ! Component: 700 - total flux cleaned = 0.0115721 Jy ! Component: 750 - total flux cleaned = 0.0125525 Jy ! Component: 800 - total flux cleaned = 0.0136439 Jy ! Component: 850 - total flux cleaned = 0.0144378 Jy ! Component: 900 - total flux cleaned = 0.0150845 Jy ! Component: 950 - total flux cleaned = 0.0153386 Jy ! Component: 1000 - total flux cleaned = 0.0160791 Jy ! Component: 1050 - total flux cleaned = 0.0160784 Jy ! Component: 1100 - total flux cleaned = 0.0163155 Jy ! Component: 1150 - total flux cleaned = 0.0165496 Jy ! Component: 1200 - total flux cleaned = 0.017233 Jy ! Component: 1250 - total flux cleaned = 0.0177909 Jy ! Component: 1300 - total flux cleaned = 0.0184484 Jy ! Component: 1350 - total flux cleaned = 0.0191973 Jy ! Component: 1400 - total flux cleaned = 0.0197221 Jy ! Component: 1450 - total flux cleaned = 0.0203431 Jy ! Component: 1500 - total flux cleaned = 0.0209519 Jy ! Component: 1550 - total flux cleaned = 0.0214515 Jy ! Component: 1600 - total flux cleaned = 0.0219419 Jy ! Component: 1650 - total flux cleaned = 0.0220394 Jy ! Component: 1700 - total flux cleaned = 0.0222301 Jy ! Component: 1750 - total flux cleaned = 0.0228852 Jy ! Component: 1800 - total flux cleaned = 0.0232539 Jy ! Component: 1850 - total flux cleaned = 0.0235259 Jy ! Component: 1900 - total flux cleaned = 0.0235261 Jy ! Component: 1950 - total flux cleaned = 0.0237056 Jy ! Component: 2000 - total flux cleaned = 0.0237069 Jy ! Component: 2050 - total flux cleaned = 0.0240537 Jy ! Component: 2100 - total flux cleaned = 0.0242252 Jy ! Component: 2150 - total flux cleaned = 0.0244798 Jy ! Component: 2200 - total flux cleaned = 0.0245639 Jy ! Component: 2250 - total flux cleaned = 0.0249803 Jy ! Component: 2300 - total flux cleaned = 0.0251449 Jy ! Component: 2350 - total flux cleaned = 0.025064 Jy ! Component: 2400 - total flux cleaned = 0.0252253 Jy ! Component: 2450 - total flux cleaned = 0.0252252 Jy ! Component: 2500 - total flux cleaned = 0.0251462 Jy ! Component: 2550 - total flux cleaned = 0.0250671 Jy ! Component: 2600 - total flux cleaned = 0.0252237 Jy ! Component: 2650 - total flux cleaned = 0.0251451 Jy ! Component: 2700 - total flux cleaned = 0.0250672 Jy ! Component: 2750 - total flux cleaned = 0.0252201 Jy ! Component: 2800 - total flux cleaned = 0.0252207 Jy ! Component: 2850 - total flux cleaned = 0.0252208 Jy ! Component: 2900 - total flux cleaned = 0.0252966 Jy ! Component: 2950 - total flux cleaned = 0.0252967 Jy ! Component: 3000 - total flux cleaned = 0.0253709 Jy ! Component: 3050 - total flux cleaned = 0.0253703 Jy ! Component: 3100 - total flux cleaned = 0.0252238 Jy ! Component: 3150 - total flux cleaned = 0.0255156 Jy ! Component: 3200 - total flux cleaned = 0.0252987 Jy ! Component: 3250 - total flux cleaned = 0.0254429 Jy ! Component: 3300 - total flux cleaned = 0.0252273 Jy ! Component: 3350 - total flux cleaned = 0.0250131 Jy ! Component: 3400 - total flux cleaned = 0.0248713 Jy ! Component: 3450 - total flux cleaned = 0.0246601 Jy ! Component: 3500 - total flux cleaned = 0.0246602 Jy ! Component: 3550 - total flux cleaned = 0.0243097 Jy ! Component: 3600 - total flux cleaned = 0.0242401 Jy ! Component: 3650 - total flux cleaned = 0.0241013 Jy ! Component: 3700 - total flux cleaned = 0.0241016 Jy ! Component: 3750 - total flux cleaned = 0.0240326 Jy ! Component: 3800 - total flux cleaned = 0.0241015 Jy ! Component: 3850 - total flux cleaned = 0.0241014 Jy ! Component: 3900 - total flux cleaned = 0.0241705 Jy ! Component: 3950 - total flux cleaned = 0.0241708 Jy ! Component: 4000 - total flux cleaned = 0.0243069 Jy ! Component: 4050 - total flux cleaned = 0.0242388 Jy ! Total flux subtracted in 4096 components = 0.0243063 Jy ! Clean residual min=-0.004462 max=0.004194 Jy/beam ! Clean residual mean=-0.000017 rms=0.001162 Jy/beam ! Combined flux in latest and established models = 0.830812 Jy keep ! Adding 263 model components to the UV plane model. ! The established model now contains 362 components and 0.830812 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J2109-4110_S_b_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.686 x 6.47 at 0.6465 degrees (North through East) ! Clean map min=-0.013232 max=0.4643 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J2109-4110_S_b_map.fits wmodel /vlbi/uf001/uva//J2109-4110_S_b_map.mod ! Writing 362 model components to file: /vlbi/uf001/uva//J2109-4110_S_b_map.mod wobs /vlbi/uf001/uva//J2109-4110_S_b_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J2109-4110_S_b_uvs.fits wwins /vlbi/uf001/uva//J2109-4110_S_b_map.win ! wwins: Wrote 4 windows to /vlbi/uf001/uva//J2109-4110_S_b_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.464302 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00114798 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.741744 0.741744 1.48349 2.96698 5.93395 11.8679 23.7358 47.4716 94.9432 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0034 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.464 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 404.452 quit ! Quitting program ! Log file /vlbi/uf001/uva//J2109-4110_S_b_dfm.log closed on Mon Jan 14 05:46:16 2019