! Started logfile: /vlbi/uf001/uvm//J2108+1430_X_a_dfm.log on Sun Jan 13 22:31:02 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uvm//J2108+1430_X_a_uvm.fits ! Reading UV FITS file: /vlbi/uf001/uvm//J2108+1430_X_a_uvm.fits ! AN table 1: 3 integrations on 3 of 3 possible baselines. ! AN table 2: 15 integrations on 21 of 21 possible baselines. ! AN table 3: 10 integrations on 28 of 28 possible baselines. ! AN table 4: 10 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.826923 visibilities/baseline/integration-bin. ! Found source: J2108+1430 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 8772 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J2108+1430_X_a] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 37 telescope corrections were flagged in sub-array 2. ! A total of 22 telescope corrections were flagged in sub-array 3. ! A total of 23 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 37 telescope corrections were flagged in sub-array 2. ! A total of 22 telescope corrections were flagged in sub-array 3. ! A total of 23 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 37 telescope corrections were flagged in sub-array 2. ! A total of 22 telescope corrections were flagged in sub-array 3. ! A total of 23 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 37 telescope corrections were flagged in sub-array 2. ! A total of 22 telescope corrections were flagged in sub-array 3. ! A total of 23 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 5. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 37 telescope corrections were flagged in sub-array 2. ! A total of 22 telescope corrections were flagged in sub-array 3. ! A total of 23 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 6. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 37 telescope corrections were flagged in sub-array 2. ! A total of 22 telescope corrections were flagged in sub-array 3. ! A total of 23 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 7. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 37 telescope corrections were flagged in sub-array 2. ! A total of 22 telescope corrections were flagged in sub-array 3. ! A total of 23 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 8. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 37 telescope corrections were flagged in sub-array 2. ! A total of 22 telescope corrections were flagged in sub-array 3. ! A total of 23 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 9. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 37 telescope corrections were flagged in sub-array 2. ! A total of 22 telescope corrections were flagged in sub-array 3. ! A total of 23 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 10. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 37 telescope corrections were flagged in sub-array 2. ! A total of 22 telescope corrections were flagged in sub-array 3. ! A total of 23 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 11. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 37 telescope corrections were flagged in sub-array 2. ! A total of 22 telescope corrections were flagged in sub-array 3. ! A total of 23 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 12. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 37 telescope corrections were flagged in sub-array 2. ! A total of 22 telescope corrections were flagged in sub-array 3. ! A total of 23 telescope corrections were flagged in sub-array 4. ! ! Fit before self-cal, rms=1.066855Jy sigma=22.230629 ! Fit after self-cal, rms=0.639465Jy sigma=13.358008 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8431 mas, bmaj=2.758 mas, bpa=-21.59 degrees ! Estimated noise=0.607307 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.273394 Jy ! Component: 100 - total flux cleaned = 0.336613 Jy ! Total flux subtracted in 100 components = 0.336613 Jy ! Clean residual min=-0.011971 max=0.024007 Jy/beam ! Clean residual mean=0.000030 rms=0.003393 Jy/beam ! Combined flux in latest and established models = 0.336613 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.336613 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.099247Jy sigma=2.055096 ! Fit after self-cal, rms=0.099210Jy sigma=2.054218 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0258588 Jy ! Component: 100 - total flux cleaned = 0.0383858 Jy ! Total flux subtracted in 100 components = 0.0383858 Jy ! Clean residual min=-0.011497 max=0.013759 Jy/beam ! Clean residual mean=0.000020 rms=0.003105 Jy/beam ! Combined flux in latest and established models = 0.374999 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 9 components and 0.374999 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.089511Jy sigma=1.860519 ! Fit after self-cal, rms=0.089420Jy sigma=1.858701 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.095 mas, bmaj=3.059 mas, bpa=-20.77 degrees ! Estimated noise=0.422004 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0153436 Jy ! Component: 100 - total flux cleaned = 0.0245229 Jy ! Component: 150 - total flux cleaned = 0.0306587 Jy ! Component: 200 - total flux cleaned = 0.0349125 Jy ! Total flux subtracted in 200 components = 0.0349125 Jy ! Clean residual min=-0.009857 max=0.013085 Jy/beam ! Clean residual mean=0.000015 rms=0.003278 Jy/beam ! Combined flux in latest and established models = 0.409911 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 18 components and 0.409911 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.086443Jy sigma=1.803352 ! Fit after self-cal, rms=0.086396Jy sigma=1.802430 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.095 x 3.059 at -20.77 degrees (North through East) ! Clean map min=-0.0096313 max=0.36283 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! HN 0.00* NL 0.00* SC 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.31 HN 0.91 KP 0.98 LA 0.95 ! NL 1.08 OV 0.86 PT 0.91 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.96 FD 0.95 HN 0.93 KP 0.96 ! LA 0.98 MK 1.01 NL 1.11 PT 0.92 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.02 FD 0.97 HN 0.98 KP 1.02 ! LA 1.04 MK 1.05 NL 1.17 OV 0.92 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! HN 0.00* NL 0.00* SC 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.39 HN 0.92 KP 0.97 LA 0.95 ! NL 1.08 OV 0.88 PT 0.91 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.96 FD 0.95 HN 0.93 KP 0.97 ! LA 0.97 MK 0.99 NL 1.07 PT 0.91 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.07 FD 0.99 HN 0.98 KP 1.02 ! LA 1.00 MK 1.03 NL 1.14 OV 0.93 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! HN 0.00* NL 0.00* SC 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.35 HN 0.92 KP 0.96 LA 0.96 ! NL 1.08 OV 0.86 PT 0.90 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.95 FD 0.97 HN 0.91 KP 0.97 ! LA 0.96 MK 0.99 NL 1.09 PT 0.92 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.04 FD 0.98 HN 0.97 KP 1.04 ! LA 1.02 MK 1.02 NL 1.15 OV 0.92 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! HN 0.00* NL 0.00* SC 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.27 HN 0.91 KP 0.96 LA 0.96 ! NL 1.04 OV 0.87 PT 0.92 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.97 FD 0.95 HN 0.94 KP 1.01 ! LA 0.98 MK 1.00 NL 1.08 PT 0.95 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.10 FD 0.98 HN 0.97 KP 1.04 ! LA 1.02 MK 1.04 NL 1.15 OV 0.90 ! ! ! Correcting IF 5. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! HN 0.00* NL 0.00* SC 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.28 HN 0.90 KP 0.97 LA 0.95 ! NL 1.07 OV 0.88 PT 0.93 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.96 FD 0.95 HN 0.93 KP 0.96 ! LA 1.00 MK 1.01 NL 1.11 PT 0.91 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.06 FD 1.00 HN 0.99 KP 1.04 ! LA 1.03 MK 1.05 NL 1.12 OV 0.93 ! ! ! Correcting IF 6. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! HN 0.00* NL 0.00* SC 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.35 HN 0.89 KP 0.96 LA 0.95 ! NL 1.08 OV 0.88 PT 0.92 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.94 FD 0.97 HN 0.91 KP 1.01 ! LA 1.00 MK 1.00 NL 1.09 PT 0.89 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.04 FD 1.02 HN 0.97 KP 1.03 ! LA 1.02 MK 1.02 NL 1.16 OV 0.93 ! ! ! Correcting IF 7. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! HN 0.00* NL 0.00* SC 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.34 HN 0.94 KP 0.96 LA 0.97 ! NL 1.05 OV 0.89 PT 0.90 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.96 FD 0.97 HN 0.93 KP 0.99 ! LA 1.01 MK 1.05 NL 1.09 PT 0.91 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.05 FD 1.02 HN 1.03 KP 1.02 ! LA 1.03 MK 1.01 NL 1.12 OV 0.88 ! ! ! Correcting IF 8. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! HN 0.00* NL 0.00* SC 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.34 HN 0.93 KP 0.98 LA 0.94 ! NL 1.06 OV 0.89 PT 0.91 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.97 FD 0.97 HN 0.94 KP 1.00 ! LA 1.00 MK 0.97 NL 1.10 PT 0.93 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.04 FD 1.01 HN 0.99 KP 1.02 ! LA 1.02 MK 1.04 NL 1.12 OV 0.91 ! ! ! Correcting IF 9. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! HN 0.00* NL 0.00* SC 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.32 HN 0.96 KP 0.99 LA 0.96 ! NL 1.08 OV 0.88 PT 0.92 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.97 FD 0.95 HN 0.93 KP 1.00 ! LA 1.00 MK 1.04 NL 1.12 PT 0.92 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.07 FD 0.97 HN 0.96 KP 1.09 ! LA 1.05 MK 1.05 NL 1.19 OV 0.95 ! ! ! Correcting IF 10. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! HN 0.00* NL 0.00* SC 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.37 HN 0.93 KP 0.99 LA 0.94 ! NL 1.11 OV 0.89 PT 0.92 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 FD 0.95 HN 0.92 KP 0.99 ! LA 0.99 MK 1.04 NL 1.13 PT 0.91 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.06 FD 1.00 HN 0.99 KP 1.05 ! LA 1.05 MK 1.01 NL 1.09 OV 0.96 ! ! ! Correcting IF 11. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! HN 0.00* NL 0.00* SC 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.31 HN 0.92 KP 0.95 LA 0.97 ! NL 1.10 OV 0.87 PT 0.92 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 FD 0.97 HN 0.91 KP 0.99 ! LA 0.99 MK 1.02 NL 1.10 PT 0.91 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.07 FD 1.03 HN 0.99 KP 1.04 ! LA 1.05 MK 1.05 NL 1.14 OV 0.94 ! ! ! Correcting IF 12. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! HN 0.00* NL 0.00* SC 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.29 HN 0.95 KP 1.01 LA 0.96 ! NL 1.09 OV 0.87 PT 0.93 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 0.93 HN 0.93 KP 0.97 ! LA 1.01 MK 1.05 NL 1.12 PT 0.93 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00 FD 1.03 HN 1.02 KP 1.01 ! LA 1.06 MK 0.99 NL 1.15 OV 0.96 ! ! ! Fit before self-cal, rms=0.086396Jy sigma=1.802430 ! Fit after self-cal, rms=0.083789Jy sigma=1.545169 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.093 mas, bmaj=3.127 mas, bpa=-20.58 degrees ! Estimated noise=0.423139 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00017091 Jy ! Component: 100 - total flux cleaned = -0.00110888 Jy ! Component: 150 - total flux cleaned = -0.00127666 Jy ! Component: 200 - total flux cleaned = -0.0014239 Jy ! Total flux subtracted in 200 components = -0.0014239 Jy ! Clean residual min=-0.008761 max=0.009207 Jy/beam ! Clean residual mean=-0.000009 rms=0.002468 Jy/beam ! Combined flux in latest and established models = 0.408488 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 30 components and 0.408488 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.083541Jy sigma=1.539780 ! Fit after self-cal, rms=0.083588Jy sigma=1.538943 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.083588Jy sigma=1.538943 ! Fit after self-cal, rms=0.081626Jy sigma=1.292465 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.084 mas, bmaj=3.132 mas, bpa=-20.7 degrees ! Estimated noise=0.42918 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00608806 Jy ! Component: 100 - total flux cleaned = 0.00626221 Jy ! Component: 150 - total flux cleaned = 0.00626787 Jy ! Component: 200 - total flux cleaned = 0.00618975 Jy ! Total flux subtracted in 200 components = 0.00618975 Jy ! Clean residual min=-0.005465 max=0.005371 Jy/beam ! Clean residual mean=-0.000015 rms=0.001547 Jy/beam ! Combined flux in latest and established models = 0.414677 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 45 components and 0.414677 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.080931Jy sigma=1.284477 ! Fit after self-cal, rms=0.081011Jy sigma=1.283975 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000212738 Jy ! Component: 100 - total flux cleaned = 7.84707e-06 Jy ! Component: 150 - total flux cleaned = -3.55365e-05 Jy ! Component: 200 - total flux cleaned = -7.8317e-05 Jy ! Total flux subtracted in 200 components = -7.8317e-05 Jy ! Clean residual min=-0.005364 max=0.005270 Jy/beam ! Clean residual mean=-0.000015 rms=0.001541 Jy/beam ! Combined flux in latest and established models = 0.414599 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 52 components and 0.414599 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.080916Jy sigma=1.283373 ! Fit after self-cal, rms=0.080915Jy sigma=1.283309 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.080915Jy sigma=1.283309 ! Fit after self-cal, rms=0.066130Jy sigma=1.103538 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.085 mas, bmaj=3.138 mas, bpa=-20.71 degrees ! Estimated noise=0.429047 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000995789 Jy ! Component: 100 - total flux cleaned = -0.00116642 Jy ! Component: 150 - total flux cleaned = -0.00125232 Jy ! Component: 200 - total flux cleaned = -0.00127816 Jy ! Total flux subtracted in 200 components = -0.00127816 Jy ! Clean residual min=-0.001903 max=0.002175 Jy/beam ! Clean residual mean=0.000001 rms=0.000459 Jy/beam ! Combined flux in latest and established models = 0.413321 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 60 components and 0.413321 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066088Jy sigma=1.102670 ! Fit after self-cal, rms=0.066092Jy sigma=1.102404 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1, 9). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00189048 Jy ! Component: 100 - total flux cleaned = 0.00228325 Jy ! Component: 150 - total flux cleaned = 0.00261617 Jy ! Component: 200 - total flux cleaned = 0.00290222 Jy ! Total flux subtracted in 200 components = 0.00290222 Jy ! Clean residual min=-0.001702 max=0.001848 Jy/beam ! Clean residual mean=0.000001 rms=0.000439 Jy/beam ! Combined flux in latest and established models = 0.416223 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 74 components and 0.416223 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065989Jy sigma=1.100305 ! Fit after self-cal, rms=0.065986Jy sigma=1.100194 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065986Jy sigma=1.100194 ! Fit after self-cal, rms=0.065985Jy sigma=1.100042 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.159 mas, bmaj=3.519 mas, bpa=-18.89 degrees ! Estimated noise=0.502986 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000257523 Jy ! Component: 100 - total flux cleaned = -8.54564e-05 Jy ! Component: 150 - total flux cleaned = 7.30361e-06 Jy ! Component: 200 - total flux cleaned = 2.75924e-05 Jy ! Total flux subtracted in 200 components = 2.75924e-05 Jy ! Clean residual min=-0.001784 max=0.001888 Jy/beam ! Clean residual mean=0.000002 rms=0.000463 Jy/beam ! Combined flux in latest and established models = 0.416251 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 92 components and 0.416251 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065967Jy sigma=1.099684 ! Fit after self-cal, rms=0.065967Jy sigma=1.099642 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000140841 Jy ! Component: 100 - total flux cleaned = 0.000199708 Jy ! Component: 150 - total flux cleaned = 0.000199419 Jy ! Component: 200 - total flux cleaned = 0.000199481 Jy ! Total flux subtracted in 200 components = 0.000199481 Jy ! Clean residual min=-0.001795 max=0.001856 Jy/beam ! Clean residual mean=0.000002 rms=0.000460 Jy/beam ! Combined flux in latest and established models = 0.41645 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 96 components and 0.41645 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065960Jy sigma=1.099539 ! Fit after self-cal, rms=0.065959Jy sigma=1.099522 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=1.085 mas, bmaj=3.138 mas, bpa=-20.71 degrees ! Estimated noise=0.429071 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.085 x 3.138 at -20.71 degrees (North through East) ! Clean map min=-0.0015505 max=0.36641 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.833 mas, bmaj=2.877 mas, bpa=-21.63 degrees ! Estimated noise=0.616071 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.277121 Jy ! Component: 100 - total flux cleaned = 0.343926 Jy ! Component: 150 - total flux cleaned = 0.372641 Jy ! Component: 200 - total flux cleaned = 0.386381 Jy ! Total flux subtracted in 200 components = 0.386381 Jy ! Clean residual min=-0.003670 max=0.006226 Jy/beam ! Clean residual mean=0.000008 rms=0.000862 Jy/beam ! Combined flux in latest and established models = 0.386381 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.386381 Jy ! Inverting map and beam ! Estimated beam: bmin=1.085 mas, bmaj=3.138 mas, bpa=-20.71 degrees ! Estimated noise=0.429071 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0105212 Jy ! Component: 100 - total flux cleaned = 0.0162389 Jy ! Component: 150 - total flux cleaned = 0.0196421 Jy ! Component: 200 - total flux cleaned = 0.0219988 Jy ! Total flux subtracted in 200 components = 0.0219988 Jy ! Clean residual min=-0.001922 max=0.002786 Jy/beam ! Clean residual mean=0.000003 rms=0.000491 Jy/beam ! Combined flux in latest and established models = 0.40838 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 40 components and 0.40838 Jy ! Inverting map ! Added new window around map position (-1.6, -2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00242842 Jy ! Component: 100 - total flux cleaned = 0.00403206 Jy ! Component: 150 - total flux cleaned = 0.00481167 Jy ! Component: 200 - total flux cleaned = 0.00551442 Jy ! Total flux subtracted in 200 components = 0.00551442 Jy ! Clean residual min=-0.001686 max=0.001744 Jy/beam ! Clean residual mean=0.000002 rms=0.000439 Jy/beam ! Combined flux in latest and established models = 0.413894 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 62 components and 0.413894 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.159 mas, bmaj=3.519 mas, bpa=-18.89 degrees ! Estimated noise=0.502986 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00100259 Jy ! Component: 100 - total flux cleaned = 0.0017667 Jy ! Component: 150 - total flux cleaned = 0.00228872 Jy ! Component: 200 - total flux cleaned = 0.00265938 Jy ! Total flux subtracted in 200 components = 0.00265938 Jy ! Clean residual min=-0.001723 max=0.001788 Jy/beam ! Clean residual mean=0.000002 rms=0.000460 Jy/beam ! Combined flux in latest and established models = 0.416553 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000221645 Jy ! Component: 100 - total flux cleaned = 0.000424132 Jy ! Component: 150 - total flux cleaned = 0.000610103 Jy ! Component: 200 - total flux cleaned = 0.000760261 Jy ! Total flux subtracted in 200 components = 0.000760261 Jy ! Clean residual min=-0.001723 max=0.001791 Jy/beam ! Clean residual mean=0.000002 rms=0.000452 Jy/beam ! Combined flux in latest and established models = 0.417314 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 102 components and 0.417314 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.085 mas, bmaj=3.138 mas, bpa=-20.71 degrees ! Estimated noise=0.429071 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000269744 Jy ! Component: 100 - total flux cleaned = 0.000491952 Jy ! Component: 150 - total flux cleaned = 0.000785016 Jy ! Component: 200 - total flux cleaned = 0.00092239 Jy ! Total flux subtracted in 200 components = 0.00092239 Jy ! Clean residual min=-0.001590 max=0.001701 Jy/beam ! Clean residual mean=0.000001 rms=0.000417 Jy/beam ! Combined flux in latest and established models = 0.418236 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 117 components and 0.418236 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065891Jy sigma=1.098418 ! Fit after self-cal, rms=0.065881Jy sigma=1.098092 wmodel J2108+1430_X_a_map.mod ! Writing 117 model components to file: J2108+1430_X_a_map.mod wobs J2108+1430_X_a_uvs.fits ! Writing UV FITS file: J2108+1430_X_a_uvs.fits wwins J2108+1430_X_a_map.win ! wwins: Wrote 3 windows to J2108+1430_X_a_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000208247 Jy ! Component: 100 - total flux cleaned = 0.000208332 Jy ! Component: 150 - total flux cleaned = 0.000181331 Jy ! Component: 200 - total flux cleaned = 0.000262291 Jy ! Component: 250 - total flux cleaned = 0.000288857 Jy ! Component: 300 - total flux cleaned = 0.000314143 Jy ! Component: 350 - total flux cleaned = 0.000440058 Jy ! Component: 400 - total flux cleaned = 0.000414403 Jy ! Component: 450 - total flux cleaned = 0.000365155 Jy ! Component: 500 - total flux cleaned = 0.00041391 Jy ! Component: 550 - total flux cleaned = 0.000485685 Jy ! Component: 600 - total flux cleaned = 0.000485796 Jy ! Component: 650 - total flux cleaned = 0.000532479 Jy ! Component: 700 - total flux cleaned = 0.000624372 Jy ! Component: 750 - total flux cleaned = 0.000578659 Jy ! Component: 800 - total flux cleaned = 0.000691047 Jy ! Component: 850 - total flux cleaned = 0.000668266 Jy ! Component: 900 - total flux cleaned = 0.000734123 Jy ! Component: 950 - total flux cleaned = 0.000821233 Jy ! Component: 1000 - total flux cleaned = 0.000907423 Jy ! Component: 1050 - total flux cleaned = 0.000907226 Jy ! Component: 1100 - total flux cleaned = 0.000928761 Jy ! Component: 1150 - total flux cleaned = 0.00109661 Jy ! Component: 1200 - total flux cleaned = 0.00109673 Jy ! Component: 1250 - total flux cleaned = 0.00119979 Jy ! Component: 1300 - total flux cleaned = 0.00124053 Jy ! Component: 1350 - total flux cleaned = 0.00132172 Jy ! Component: 1400 - total flux cleaned = 0.00140219 Jy ! Component: 1450 - total flux cleaned = 0.0014218 Jy ! Component: 1500 - total flux cleaned = 0.00142167 Jy ! Component: 1550 - total flux cleaned = 0.00150051 Jy ! Component: 1600 - total flux cleaned = 0.0015786 Jy ! Component: 1650 - total flux cleaned = 0.00159786 Jy ! Component: 1700 - total flux cleaned = 0.0016556 Jy ! Component: 1750 - total flux cleaned = 0.00167477 Jy ! Component: 1800 - total flux cleaned = 0.00169377 Jy ! Component: 1850 - total flux cleaned = 0.00178772 Jy ! Component: 1900 - total flux cleaned = 0.00176926 Jy ! Component: 1950 - total flux cleaned = 0.00189883 Jy ! Component: 2000 - total flux cleaned = 0.00189886 Jy ! Component: 2050 - total flux cleaned = 0.00188047 Jy ! Component: 2100 - total flux cleaned = 0.00191674 Jy ! Component: 2150 - total flux cleaned = 0.00188065 Jy ! Component: 2200 - total flux cleaned = 0.00191641 Jy ! Component: 2250 - total flux cleaned = 0.00195198 Jy ! Component: 2300 - total flux cleaned = 0.00200488 Jy ! Component: 2350 - total flux cleaned = 0.0020751 Jy ! Component: 2400 - total flux cleaned = 0.00209248 Jy ! Component: 2450 - total flux cleaned = 0.00205776 Jy ! Component: 2500 - total flux cleaned = 0.00212682 Jy ! Component: 2550 - total flux cleaned = 0.002161 Jy ! Component: 2600 - total flux cleaned = 0.00216109 Jy ! Component: 2650 - total flux cleaned = 0.00226289 Jy ! Component: 2700 - total flux cleaned = 0.00229659 Jy ! Component: 2750 - total flux cleaned = 0.00238052 Jy ! Component: 2800 - total flux cleaned = 0.00243061 Jy ! Component: 2850 - total flux cleaned = 0.00236399 Jy ! Component: 2900 - total flux cleaned = 0.00246327 Jy ! Component: 2950 - total flux cleaned = 0.00244679 Jy ! Component: 3000 - total flux cleaned = 0.00251235 Jy ! Component: 3050 - total flux cleaned = 0.00249604 Jy ! Component: 3100 - total flux cleaned = 0.00264182 Jy ! Component: 3150 - total flux cleaned = 0.00257746 Jy ! Component: 3200 - total flux cleaned = 0.00264167 Jy ! Component: 3250 - total flux cleaned = 0.00275351 Jy ! Component: 3300 - total flux cleaned = 0.00276935 Jy ! Component: 3350 - total flux cleaned = 0.00276942 Jy ! Component: 3400 - total flux cleaned = 0.0028324 Jy ! Component: 3450 - total flux cleaned = 0.00284811 Jy ! Component: 3500 - total flux cleaned = 0.00286366 Jy ! Component: 3550 - total flux cleaned = 0.002988 Jy ! Component: 3600 - total flux cleaned = 0.00300343 Jy ! Component: 3650 - total flux cleaned = 0.00301875 Jy ! Component: 3700 - total flux cleaned = 0.00306477 Jy ! Component: 3750 - total flux cleaned = 0.00308004 Jy ! Component: 3800 - total flux cleaned = 0.00312566 Jy ! Component: 3850 - total flux cleaned = 0.00315589 Jy ! Component: 3900 - total flux cleaned = 0.0032312 Jy ! Component: 3950 - total flux cleaned = 0.00327609 Jy ! Component: 4000 - total flux cleaned = 0.00317146 Jy ! Component: 4050 - total flux cleaned = 0.00326073 Jy ! Total flux subtracted in 4096 components = 0.00318668 Jy ! Clean residual min=-0.000947 max=0.000954 Jy/beam ! Clean residual mean=0.000002 rms=0.000273 Jy/beam ! Combined flux in latest and established models = 0.421423 Jy keep ! Adding 313 model components to the UV plane model. ! The established model now contains 430 components and 0.421423 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uvm//J2108+1430_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.085 x 3.138 at -20.71 degrees (North through East) ! Clean map min=-0.0013948 max=0.36611 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uvm//J2108+1430_X_a_map.fits wmodel /vlbi/uf001/uvm//J2108+1430_X_a_map.mod ! Writing 430 model components to file: /vlbi/uf001/uvm//J2108+1430_X_a_map.mod wobs /vlbi/uf001/uvm//J2108+1430_X_a_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uvm//J2108+1430_X_a_uvs.fits wwins /vlbi/uf001/uvm//J2108+1430_X_a_map.win ! wwins: Wrote 4 windows to /vlbi/uf001/uvm//J2108+1430_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.366106 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000273516 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.224129 0.224129 0.448257 0.896515 1.79303 3.58606 7.17212 14.3442 28.6885 57.377 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.366 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1338.52 quit ! Quitting program ! Log file /vlbi/uf001/uvm//J2108+1430_X_a_dfm.log closed on Sun Jan 13 22:31:06 2019