! Started logfile: /vlbi/uf001/uva//J2105+0033_X_dfm.log on Mon Jan 14 05:44:48 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /vlbi/uf001/uva//J2105+0033_X_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J2105+0033_X_uva.fits
! AN table 1: 72 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.988272 visibilities/baseline/integration-bin.
! Found source: J2105+0033
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 38424 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J2105+0033_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.004913Jy  sigma=23.521486
! Fit after  self-cal, rms=0.918391Jy  sigma=21.469491
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.711 mas, bmaj=1.708 mas, bpa=-2.776 degrees
! Estimated noise=0.280535 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0594908 Jy
! Component: 100  -  total flux cleaned = 0.0758048 Jy
! Total flux subtracted in 100 components = 0.0758048 Jy
! Clean residual min=-0.004375 max=0.012453 Jy/beam
! Clean residual mean=-0.000003 rms=0.000920 Jy/beam
! Combined flux in latest and established models = 0.0758048 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.0758048 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060840Jy  sigma=1.337245
! Fit after  self-cal, rms=0.060666Jy  sigma=1.333557
! Inverting map 
! Added new window around map position (1.6, 0.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0111448 Jy
! Component: 100  -  total flux cleaned = 0.0172123 Jy
! Total flux subtracted in 100 components = 0.0172123 Jy
! Clean residual min=-0.004658 max=0.004845 Jy/beam
! Clean residual mean=-0.000002 rms=0.000673 Jy/beam
! Combined flux in latest and established models = 0.0930172 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 16 components and 0.0930172 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057867Jy  sigma=1.259525
! Fit after  self-cal, rms=0.057626Jy  sigma=1.253434
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00510053 Jy
! Component: 100  -  total flux cleaned = 0.00823849 Jy
! Total flux subtracted in 100 components = 0.00823849 Jy
! Clean residual min=-0.003859 max=0.003004 Jy/beam
! Clean residual mean=-0.000002 rms=0.000584 Jy/beam
! Combined flux in latest and established models = 0.101256 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 25 components and 0.101256 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056895Jy  sigma=1.233287
! Fit after  self-cal, rms=0.056859Jy  sigma=1.232296
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8783 mas, bmaj=2.018 mas, bpa=-2.699 degrees
! Estimated noise=0.156715 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00516567 Jy
! Component: 100  -  total flux cleaned = 0.00839611 Jy
! Component: 150  -  total flux cleaned = 0.0106175 Jy
! Component: 200  -  total flux cleaned = 0.0122078 Jy
! Total flux subtracted in 200 components = 0.0122078 Jy
! Clean residual min=-0.003668 max=0.002815 Jy/beam
! Clean residual mean=-0.000002 rms=0.000563 Jy/beam
! Combined flux in latest and established models = 0.113463 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 53 components and 0.113463 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056371Jy  sigma=1.218192
! Fit after  self-cal, rms=0.056367Jy  sigma=1.217725
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8783 x 2.018 at -2.699 degrees (North through East)
! Clean map  min=-0.0032545  max=0.078641 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.05     HN        1.02     KP        1.02     
!   LA        0.99     MK        1.09     NL        1.14     OV        0.90     
!   PT        0.88     SC        0.98     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        1.03     HN        1.00     KP        1.01     
!   LA        1.03     MK        1.03     NL        1.11     OV        0.91     
!   PT        0.87     SC        0.98     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.02     HN        1.02     KP        1.07     
!   LA        0.99     MK        1.01     NL        1.11     OV        0.90     
!   PT        0.86     SC        1.03     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.02     HN        0.97     KP        1.02     
!   LA        1.01     MK        0.98     NL        1.11     OV        0.91     
!   PT        0.89     SC        1.00     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.03     HN        1.05     KP        1.07     
!   LA        1.00     MK        1.07     NL        1.09     OV        0.91     
!   PT        0.87     SC        1.03     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.02     HN        1.02     KP        1.03     
!   LA        1.01     MK        1.01     NL        1.11     OV        0.93     
!   PT        0.87     SC        0.98     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        1.02     HN        1.03     KP        1.03     
!   LA        1.02     MK        1.03     NL        1.11     OV        0.93     
!   PT        0.87     SC        1.02     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.05     HN        1.03     KP        1.07     
!   LA        1.01     MK        1.02     NL        1.12     OV        0.91     
!   PT        0.85     SC        1.03     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.03     HN        0.96     KP        1.06     
!   LA        1.01     MK        1.01     NL        1.12     OV        0.93     
!   PT        0.87     SC        1.01     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.03     HN        0.96     KP        0.99     
!   LA        1.03     MK        1.02     NL        1.10     OV        0.93     
!   PT        0.86     SC        0.95     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.00     HN        1.00     KP        1.05     
!   LA        1.02     MK        1.09     NL        1.12     OV        0.94     
!   PT        0.86     SC        1.02     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        1.00     HN        1.00     KP        1.04     
!   LA        1.02     MK        1.09     NL        1.06     OV        0.94     
!   PT        0.87     SC        0.98     
! 
! 
! Fit before self-cal, rms=0.056367Jy  sigma=1.217725
! Fit after  self-cal, rms=0.056076Jy  sigma=1.200362
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8848 mas, bmaj=2.041 mas, bpa=-2.268 degrees
! Estimated noise=0.157802 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000605972 Jy
! Component: 100  -  total flux cleaned = -0.00087945 Jy
! Component: 150  -  total flux cleaned = -0.00109521 Jy
! Component: 200  -  total flux cleaned = -0.00118835 Jy
! Total flux subtracted in 200 components = -0.00118835 Jy
! Clean residual min=-0.001028 max=0.001063 Jy/beam
! Clean residual mean=-0.000000 rms=0.000241 Jy/beam
! Combined flux in latest and established models = 0.112275 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 64 components and 0.112275 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056052Jy  sigma=1.199781
! Fit after  self-cal, rms=0.056096Jy  sigma=1.199391
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056096Jy  sigma=1.199391
! Fit after  self-cal, rms=0.057096Jy  sigma=1.196008
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8838 mas, bmaj=2.044 mas, bpa=-2.237 degrees
! Estimated noise=0.158015 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000202349 Jy
! Component: 100  -  total flux cleaned = -0.000340143 Jy
! Component: 150  -  total flux cleaned = -0.000397465 Jy
! Component: 200  -  total flux cleaned = -0.000448716 Jy
! Total flux subtracted in 200 components = -0.000448716 Jy
! Clean residual min=-0.000865 max=0.000939 Jy/beam
! Clean residual mean=-0.000000 rms=0.000201 Jy/beam
! Combined flux in latest and established models = 0.111826 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 72 components and 0.111826 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057081Jy  sigma=1.195638
! Fit after  self-cal, rms=0.057103Jy  sigma=1.195570
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-0.4, 6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000796525 Jy
! Component: 100  -  total flux cleaned = 0.000969936 Jy
! Component: 150  -  total flux cleaned = 0.00104146 Jy
! Component: 200  -  total flux cleaned = 0.00104087 Jy
! Total flux subtracted in 200 components = 0.00104087 Jy
! Clean residual min=-0.000732 max=0.000789 Jy/beam
! Clean residual mean=-0.000000 rms=0.000191 Jy/beam
! Combined flux in latest and established models = 0.112867 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 89 components and 0.112867 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057086Jy  sigma=1.195145
! Fit after  self-cal, rms=0.057084Jy  sigma=1.195131
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057084Jy  sigma=1.195131
! Fit after  self-cal, rms=0.057227Jy  sigma=1.194899
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8826 mas, bmaj=2.044 mas, bpa=-2.165 degrees
! Estimated noise=0.158004 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000215486 Jy
! Component: 100  -  total flux cleaned = -0.000215899 Jy
! Component: 150  -  total flux cleaned = -0.000230349 Jy
! Component: 200  -  total flux cleaned = -0.000268752 Jy
! Total flux subtracted in 200 components = -0.000268752 Jy
! Clean residual min=-0.000701 max=0.000775 Jy/beam
! Clean residual mean=-0.000000 rms=0.000184 Jy/beam
! Combined flux in latest and established models = 0.112599 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 90 components and 0.112599 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057219Jy  sigma=1.194700
! Fit after  self-cal, rms=0.057222Jy  sigma=1.194691
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.14284e-05 Jy
! Component: 100  -  total flux cleaned = -7.37406e-05 Jy
! Component: 150  -  total flux cleaned = -8.4153e-05 Jy
! Component: 200  -  total flux cleaned = -9.40081e-05 Jy
! Total flux subtracted in 200 components = -9.40081e-05 Jy
! Clean residual min=-0.000716 max=0.000756 Jy/beam
! Clean residual mean=-0.000000 rms=0.000182 Jy/beam
! Combined flux in latest and established models = 0.112504 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 93 components and 0.112504 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057219Jy  sigma=1.194598
! Fit after  self-cal, rms=0.057218Jy  sigma=1.194595
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057218Jy  sigma=1.194595
! Fit after  self-cal, rms=0.057268Jy  sigma=1.194562
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.176 mas, bmaj=3.366 mas, bpa=0.4579 degrees
! Estimated noise=0.199076 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000212285 Jy
! Component: 100  -  total flux cleaned = -0.000243736 Jy
! Component: 150  -  total flux cleaned = -0.000237115 Jy
! Component: 200  -  total flux cleaned = -0.000224222 Jy
! Total flux subtracted in 200 components = -0.000224222 Jy
! Clean residual min=-0.000790 max=0.000756 Jy/beam
! Clean residual mean=-0.000000 rms=0.000218 Jy/beam
! Combined flux in latest and established models = 0.11228 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 109 components and 0.11228 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057267Jy  sigma=1.194539
! Fit after  self-cal, rms=0.057268Jy  sigma=1.194532
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.97552e-05 Jy
! Component: 100  -  total flux cleaned = -7.95116e-05 Jy
! Component: 150  -  total flux cleaned = -8.43002e-05 Jy
! Component: 200  -  total flux cleaned = -9.31345e-05 Jy
! Total flux subtracted in 200 components = -9.31345e-05 Jy
! Clean residual min=-0.000783 max=0.000759 Jy/beam
! Clean residual mean=-0.000000 rms=0.000218 Jy/beam
! Combined flux in latest and established models = 0.112187 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 116 components and 0.112187 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057267Jy  sigma=1.194527
! Fit after  self-cal, rms=0.057267Jy  sigma=1.194527
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.882 mas, bmaj=2.044 mas, bpa=-2.123 degrees
! Estimated noise=0.158007 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.882 x 2.044 at -2.123 degrees (North through East)
! Clean map  min=-0.00067315  max=0.079287 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.71 mas, bmaj=1.717 mas, bpa=-2.134 degrees
! Estimated noise=0.286477 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0603821 Jy
! Component: 100  -  total flux cleaned = 0.0788953 Jy
! Component: 150  -  total flux cleaned = 0.0893157 Jy
! Component: 200  -  total flux cleaned = 0.0954363 Jy
! Total flux subtracted in 200 components = 0.0954363 Jy
! Clean residual min=-0.002045 max=0.003129 Jy/beam
! Clean residual mean=-0.000001 rms=0.000503 Jy/beam
! Combined flux in latest and established models = 0.0954363 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.0954363 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.882 mas, bmaj=2.044 mas, bpa=-2.123 degrees
! Estimated noise=0.158007 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00614611 Jy
! Component: 100  -  total flux cleaned = 0.00948883 Jy
! Component: 150  -  total flux cleaned = 0.011426 Jy
! Component: 200  -  total flux cleaned = 0.0126483 Jy
! Total flux subtracted in 200 components = 0.0126483 Jy
! Clean residual min=-0.000822 max=0.000837 Jy/beam
! Clean residual mean=-0.000001 rms=0.000207 Jy/beam
! Combined flux in latest and established models = 0.108085 Jy
! Adding 28 model components to the UV plane model.
! The established model now contains 33 components and 0.108085 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.176 mas, bmaj=3.366 mas, bpa=0.4579 degrees
! Estimated noise=0.199076 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00130486 Jy
! Component: 100  -  total flux cleaned = 0.00213615 Jy
! Component: 150  -  total flux cleaned = 0.0027272 Jy
! Component: 200  -  total flux cleaned = 0.00315841 Jy
! Total flux subtracted in 200 components = 0.00315841 Jy
! Clean residual min=-0.000816 max=0.000731 Jy/beam
! Clean residual mean=-0.000000 rms=0.000225 Jy/beam
! Combined flux in latest and established models = 0.111243 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000212555 Jy
! Component: 100  -  total flux cleaned = 0.000288699 Jy
! Component: 150  -  total flux cleaned = 0.000336342 Jy
! Component: 200  -  total flux cleaned = 0.00037892 Jy
! Total flux subtracted in 200 components = 0.00037892 Jy
! Clean residual min=-0.000804 max=0.000721 Jy/beam
! Clean residual mean=-0.000000 rms=0.000220 Jy/beam
! Combined flux in latest and established models = 0.111622 Jy
! Adding 61 model components to the UV plane model.
! The established model now contains 89 components and 0.111622 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.882 mas, bmaj=2.044 mas, bpa=-2.123 degrees
! Estimated noise=0.158007 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000100287 Jy
! Component: 100  -  total flux cleaned = -0.000132123 Jy
! Component: 150  -  total flux cleaned = -0.000175026 Jy
! Component: 200  -  total flux cleaned = -0.000200844 Jy
! Total flux subtracted in 200 components = -0.000200844 Jy
! Clean residual min=-0.000737 max=0.000795 Jy/beam
! Clean residual mean=-0.000000 rms=0.000180 Jy/beam
! Combined flux in latest and established models = 0.111421 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 98 components and 0.111421 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057268Jy  sigma=1.194482
! Fit after  self-cal, rms=0.057260Jy  sigma=1.194446
wmodel J2105+0033_X_map.mod
! Writing 98 model components to file: J2105+0033_X_map.mod
wobs   J2105+0033_X_uvs.fits
! Writing UV FITS file: J2105+0033_X_uvs.fits
wwins  J2105+0033_X_map.win
! wwins: Wrote 3 windows to J2105+0033_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000184812 Jy
! Component: 100  -  total flux cleaned = 0.000288566 Jy
! Component: 150  -  total flux cleaned = 0.000400876 Jy
! Component: 200  -  total flux cleaned = 0.000484895 Jy
! Component: 250  -  total flux cleaned = 0.000496286 Jy
! Component: 300  -  total flux cleaned = 0.000530625 Jy
! Component: 350  -  total flux cleaned = 0.000575512 Jy
! Component: 400  -  total flux cleaned = 0.000652425 Jy
! Component: 450  -  total flux cleaned = 0.000706408 Jy
! Component: 500  -  total flux cleaned = 0.000727621 Jy
! Component: 550  -  total flux cleaned = 0.000769496 Jy
! Component: 600  -  total flux cleaned = 0.000800318 Jy
! Component: 650  -  total flux cleaned = 0.000800312 Jy
! Component: 700  -  total flux cleaned = 0.000810361 Jy
! Component: 750  -  total flux cleaned = 0.000830135 Jy
! Component: 800  -  total flux cleaned = 0.00083031 Jy
! Component: 850  -  total flux cleaned = 0.000840297 Jy
! Component: 900  -  total flux cleaned = 0.000897893 Jy
! Component: 950  -  total flux cleaned = 0.000878797 Jy
! Component: 1000  -  total flux cleaned = 0.000897622 Jy
! Component: 1050  -  total flux cleaned = 0.000888429 Jy
! Component: 1100  -  total flux cleaned = 0.000925298 Jy
! Component: 1150  -  total flux cleaned = 0.000934386 Jy
! Component: 1200  -  total flux cleaned = 0.000943309 Jy
! Component: 1250  -  total flux cleaned = 0.00097024 Jy
! Component: 1300  -  total flux cleaned = 0.000997017 Jy
! Component: 1350  -  total flux cleaned = 0.0010322 Jy
! Component: 1400  -  total flux cleaned = 0.00106697 Jy
! Component: 1450  -  total flux cleaned = 0.00105824 Jy
! Component: 1500  -  total flux cleaned = 0.00106695 Jy
! Component: 1550  -  total flux cleaned = 0.00110104 Jy
! Component: 1600  -  total flux cleaned = 0.00110103 Jy
! Component: 1650  -  total flux cleaned = 0.00111776 Jy
! Component: 1700  -  total flux cleaned = 0.00111781 Jy
! Component: 1750  -  total flux cleaned = 0.00115918 Jy
! Component: 1800  -  total flux cleaned = 0.00116729 Jy
! Component: 1850  -  total flux cleaned = 0.00121602 Jy
! Component: 1900  -  total flux cleaned = 0.00124017 Jy
! Component: 1950  -  total flux cleaned = 0.00125619 Jy
! Component: 2000  -  total flux cleaned = 0.00127996 Jy
! Component: 2050  -  total flux cleaned = 0.00127992 Jy
! Component: 2100  -  total flux cleaned = 0.00129554 Jy
! Component: 2150  -  total flux cleaned = 0.00131879 Jy
! Component: 2200  -  total flux cleaned = 0.0013266 Jy
! Component: 2250  -  total flux cleaned = 0.00138004 Jy
! Component: 2300  -  total flux cleaned = 0.00139523 Jy
! Component: 2350  -  total flux cleaned = 0.00141781 Jy
! Component: 2400  -  total flux cleaned = 0.00142529 Jy
! Component: 2450  -  total flux cleaned = 0.00143281 Jy
! Component: 2500  -  total flux cleaned = 0.00145507 Jy
! Component: 2550  -  total flux cleaned = 0.00145504 Jy
! Component: 2600  -  total flux cleaned = 0.001477 Jy
! Component: 2650  -  total flux cleaned = 0.00148425 Jy
! Component: 2700  -  total flux cleaned = 0.00149143 Jy
! Component: 2750  -  total flux cleaned = 0.00149864 Jy
! Component: 2800  -  total flux cleaned = 0.00154861 Jy
! Component: 2850  -  total flux cleaned = 0.0015415 Jy
! Component: 2900  -  total flux cleaned = 0.0015202 Jy
! Component: 2950  -  total flux cleaned = 0.00154825 Jy
! Component: 3000  -  total flux cleaned = 0.00156223 Jy
! Component: 3050  -  total flux cleaned = 0.0015969 Jy
! Component: 3100  -  total flux cleaned = 0.00159691 Jy
! Component: 3150  -  total flux cleaned = 0.00161747 Jy
! Component: 3200  -  total flux cleaned = 0.00162423 Jy
! Component: 3250  -  total flux cleaned = 0.00161072 Jy
! Component: 3300  -  total flux cleaned = 0.00165797 Jy
! Component: 3350  -  total flux cleaned = 0.00167136 Jy
! Component: 3400  -  total flux cleaned = 0.00172483 Jy
! Component: 3450  -  total flux cleaned = 0.00174476 Jy
! Component: 3500  -  total flux cleaned = 0.00177782 Jy
! Component: 3550  -  total flux cleaned = 0.00175807 Jy
! Component: 3600  -  total flux cleaned = 0.00176468 Jy
! Component: 3650  -  total flux cleaned = 0.00181682 Jy
! Component: 3700  -  total flux cleaned = 0.0018363 Jy
! Component: 3750  -  total flux cleaned = 0.0018751 Jy
! Component: 3800  -  total flux cleaned = 0.00190081 Jy
! Component: 3850  -  total flux cleaned = 0.00193917 Jy
! Component: 3900  -  total flux cleaned = 0.00193916 Jy
! Component: 3950  -  total flux cleaned = 0.00198985 Jy
! Component: 4000  -  total flux cleaned = 0.00200249 Jy
! Component: 4050  -  total flux cleaned = 0.00200878 Jy
! Total flux subtracted in 4096 components = 0.00204626 Jy
! Clean residual min=-0.000372 max=0.000421 Jy/beam
! Clean residual mean=-0.000000 rms=0.000109 Jy/beam
! Combined flux in latest and established models = 0.113467 Jy
keep
! Adding 305 model components to the UV plane model.
! The established model now contains 403 components and 0.113467 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J2105+0033_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.882 x 2.044 at -2.123 degrees (North through East)
! Clean map  min=-0.00052753  max=0.07983 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J2105+0033_X_map.fits
wmodel /vlbi/uf001/uva//J2105+0033_X_map.mod
! Writing 403 model components to file: /vlbi/uf001/uva//J2105+0033_X_map.mod
wobs   /vlbi/uf001/uva//J2105+0033_X_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J2105+0033_X_uvs.fits
wwins  /vlbi/uf001/uva//J2105+0033_X_map.win
! wwins: Wrote 4 windows to /vlbi/uf001/uva//J2105+0033_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0798298 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000108943 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.409408 0.409408 0.818815 1.63763 3.27526 6.55052 13.101 26.2021 52.4042
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.079 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  732.766 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J2105+0033_X_dfm.log closed on Mon Jan 14 05:44:54 2019