! Started logfile: /vlbi/uf001/uva//J2101-4219_S_dfm.log on Mon Jan 14 05:43:17 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J2101-4219_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J2101-4219_S_uva.fits
! AN table 1: 82 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.641696 visibilities/baseline/integration-bin.
! Found source: J2101-4219
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 3315 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J2101-4219_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 135 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 135 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 135 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.263801Jy  sigma=13.598213
! Fit after  self-cal, rms=0.538967Jy  sigma=6.017560
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.288 mas, bmaj=5.783 mas, bpa=-3.425 degrees
! Estimated noise=1.54928 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.409559 Jy
! Component: 100  -  total flux cleaned = 0.595093 Jy
! Total flux subtracted in 100 components = 0.595093 Jy
! Clean residual min=-0.061371 max=0.099262 Jy/beam
! Clean residual mean=-0.001097 rms=0.025522 Jy/beam
! Combined flux in latest and established models = 0.595093 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.595093 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.320011Jy  sigma=3.388603
! Fit after  self-cal, rms=0.319457Jy  sigma=3.383341
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.677 mas, bmaj=6.548 mas, bpa=-1.257 degrees
! Estimated noise=1.15401 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.170775 Jy
! Component: 100  -  total flux cleaned = 0.264951 Jy
! Component: 150  -  total flux cleaned = 0.319912 Jy
! Component: 200  -  total flux cleaned = 0.351999 Jy
! Total flux subtracted in 200 components = 0.351999 Jy
! Clean residual min=-0.055428 max=0.089161 Jy/beam
! Clean residual mean=-0.000212 rms=0.021228 Jy/beam
! Combined flux in latest and established models = 0.947092 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 35 components and 0.947092 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.211186Jy  sigma=2.157798
! Fit after  self-cal, rms=0.210891Jy  sigma=2.154323
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.677 x 6.548 at -1.257 degrees (North through East)
! Clean map  min=-0.054304  max=0.51801 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   KP        0.93     LA        0.92     MK        0.99     NL        1.85     
!   OV        0.97     PT        0.92     SC        1.08     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   KP        0.92     LA        0.95     MK        1.02     NL        1.83     
!   OV        0.82     PT        0.92     SC        1.04     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   KP        0.93     LA        0.94     MK        1.09     NL        1.76     
!   OV        0.94     PT        0.95     SC        1.05     
! 
! 
! Fit before self-cal, rms=0.210891Jy  sigma=2.154323
! Fit after  self-cal, rms=0.152870Jy  sigma=1.280605
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.732 mas, bmaj=6.6 mas, bpa=-0.359 degrees
! Estimated noise=1.1735 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-10.5, -3.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0342934 Jy
! Component: 100  -  total flux cleaned = 0.0387133 Jy
! Component: 150  -  total flux cleaned = 0.0374349 Jy
! Component: 200  -  total flux cleaned = 0.0378009 Jy
! Total flux subtracted in 200 components = 0.0378009 Jy
! Clean residual min=-0.014800 max=0.020072 Jy/beam
! Clean residual mean=-0.000133 rms=0.004376 Jy/beam
! Combined flux in latest and established models = 0.984893 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 51 components and 0.984893 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.143464Jy  sigma=1.181681
! Fit after  self-cal, rms=0.143184Jy  sigma=1.167087
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.143184Jy  sigma=1.167087
! Fit after  self-cal, rms=0.138696Jy  sigma=1.157990
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.719 mas, bmaj=6.59 mas, bpa=-0.009021 degrees
! Estimated noise=1.15879 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0141343 Jy
! Component: 100  -  total flux cleaned = 0.0161426 Jy
! Component: 150  -  total flux cleaned = 0.0161449 Jy
! Component: 200  -  total flux cleaned = 0.0161554 Jy
! Total flux subtracted in 200 components = 0.0161554 Jy
! Clean residual min=-0.011215 max=0.012683 Jy/beam
! Clean residual mean=-0.000057 rms=0.003017 Jy/beam
! Combined flux in latest and established models = 1.00105 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 63 components and 1.00105 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.136721Jy  sigma=1.140730
! Fit after  self-cal, rms=0.136280Jy  sigma=1.137072
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0047748 Jy
! Component: 100  -  total flux cleaned = 0.0062088 Jy
! Component: 150  -  total flux cleaned = 0.00675492 Jy
! Component: 200  -  total flux cleaned = 0.00687081 Jy
! Total flux subtracted in 200 components = 0.00687081 Jy
! Clean residual min=-0.009962 max=0.011545 Jy/beam
! Clean residual mean=-0.000045 rms=0.002674 Jy/beam
! Combined flux in latest and established models = 1.00792 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 71 components and 1.00792 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.135717Jy  sigma=1.133335
! Fit after  self-cal, rms=0.135599Jy  sigma=1.132583
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.135599Jy  sigma=1.132583
! Fit after  self-cal, rms=0.133845Jy  sigma=1.127050
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.715 mas, bmaj=6.616 mas, bpa=-0.2481 degrees
! Estimated noise=1.15777 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00586058 Jy
! Component: 100  -  total flux cleaned = 0.00666241 Jy
! Component: 150  -  total flux cleaned = 0.0067596 Jy
! Component: 200  -  total flux cleaned = 0.00660103 Jy
! Total flux subtracted in 200 components = 0.00660103 Jy
! Clean residual min=-0.009184 max=0.008449 Jy/beam
! Clean residual mean=-0.000035 rms=0.002199 Jy/beam
! Combined flux in latest and established models = 1.01452 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 85 components and 1.01452 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.133482Jy  sigma=1.124019
! Fit after  self-cal, rms=0.133378Jy  sigma=1.123264
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00240534 Jy
! Component: 100  -  total flux cleaned = 0.00267091 Jy
! Component: 150  -  total flux cleaned = 0.00266894 Jy
! Component: 200  -  total flux cleaned = 0.00273771 Jy
! Total flux subtracted in 200 components = 0.00273771 Jy
! Clean residual min=-0.008640 max=0.008458 Jy/beam
! Clean residual mean=-0.000031 rms=0.002082 Jy/beam
! Combined flux in latest and established models = 1.01726 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 99 components and 1.01726 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.133240Jy  sigma=1.122161
! Fit after  self-cal, rms=0.133205Jy  sigma=1.121913
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.133205Jy  sigma=1.121913
! Fit after  self-cal, rms=0.132595Jy  sigma=1.121221
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.438 mas, bmaj=23.73 mas, bpa=-1.33 degrees
! Estimated noise=1.64883 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0050789 Jy
! Component: 100  -  total flux cleaned = 0.00661272 Jy
! Component: 150  -  total flux cleaned = 0.00656604 Jy
! Component: 200  -  total flux cleaned = 0.006567 Jy
! Total flux subtracted in 200 components = 0.006567 Jy
! Clean residual min=-0.006045 max=0.007204 Jy/beam
! Clean residual mean=-0.000042 rms=0.002335 Jy/beam
! Combined flux in latest and established models = 1.02382 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 109 components and 1.02382 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.132567Jy  sigma=1.121258
! Fit after  self-cal, rms=0.132474Jy  sigma=1.120683
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00238126 Jy
! Component: 100  -  total flux cleaned = 0.00261277 Jy
! Component: 150  -  total flux cleaned = 0.00261261 Jy
! Component: 200  -  total flux cleaned = 0.00261294 Jy
! Total flux subtracted in 200 components = 0.00261294 Jy
! Clean residual min=-0.005691 max=0.006593 Jy/beam
! Clean residual mean=-0.000033 rms=0.002102 Jy/beam
! Combined flux in latest and established models = 1.02644 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 116 components and 1.02644 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.132486Jy  sigma=1.120977
! Fit after  self-cal, rms=0.132457Jy  sigma=1.120807
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.716 mas, bmaj=6.627 mas, bpa=-0.2863 degrees
! Estimated noise=1.15904 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.716 x 6.627 at -0.2863 degrees (North through East)
! Clean map  min=-0.0077352  max=0.5206 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.132457Jy  sigma=1.120807
! Fit after  self-cal, rms=0.124273Jy  sigma=0.990984
! Inverting map and beam 
! Estimated beam: bmin=2.72 mas, bmaj=6.64 mas, bpa=-0.2831 degrees
! Estimated noise=1.16211 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00201017 Jy
! Component: 100  -  total flux cleaned = 0.00182718 Jy
! Component: 150  -  total flux cleaned = 0.0015992 Jy
! Component: 200  -  total flux cleaned = 0.00165994 Jy
! Total flux subtracted in 200 components = 0.00165994 Jy
! Clean residual min=-0.008006 max=0.006863 Jy/beam
! Clean residual mean=0.000006 rms=0.001788 Jy/beam
! Combined flux in latest and established models = 1.0281 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 124 components and 1.0281 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.124079Jy  sigma=0.988966
! Fit after  self-cal, rms=0.124085Jy  sigma=0.988765
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000698541 Jy
! Component: 100  -  total flux cleaned = 0.000761542 Jy
! Component: 150  -  total flux cleaned = 0.000815304 Jy
! Component: 200  -  total flux cleaned = 0.000766198 Jy
! Total flux subtracted in 200 components = 0.000766198 Jy
! Clean residual min=-0.007633 max=0.006593 Jy/beam
! Clean residual mean=0.000007 rms=0.001743 Jy/beam
! Combined flux in latest and established models = 1.02886 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 127 components and 1.02886 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.124017Jy  sigma=0.988222
! Fit after  self-cal, rms=0.124014Jy  sigma=0.988134
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.124014Jy  sigma=0.988134
! Fit after  self-cal, rms=0.123649Jy  sigma=0.987844
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.325 mas, bmaj=5.817 mas, bpa=-1.888 degrees
! Estimated noise=1.61968 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.421706 Jy
! Component: 100  -  total flux cleaned = 0.610201 Jy
! Component: 150  -  total flux cleaned = 0.721925 Jy
! Component: 200  -  total flux cleaned = 0.793606 Jy
! Total flux subtracted in 200 components = 0.793606 Jy
! Clean residual min=-0.029634 max=0.044419 Jy/beam
! Clean residual mean=-0.000559 rms=0.011203 Jy/beam
! Combined flux in latest and established models = 0.793606 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 38 model components to the UV plane model.
! The established model now contains 38 components and 0.793606 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.721 mas, bmaj=6.646 mas, bpa=-0.2694 degrees
! Estimated noise=1.16285 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0749861 Jy
! Component: 100  -  total flux cleaned = 0.121633 Jy
! Component: 150  -  total flux cleaned = 0.152844 Jy
! Component: 200  -  total flux cleaned = 0.174239 Jy
! Total flux subtracted in 200 components = 0.174239 Jy
! Clean residual min=-0.014619 max=0.015172 Jy/beam
! Clean residual mean=-0.000094 rms=0.004297 Jy/beam
! Combined flux in latest and established models = 0.967845 Jy
! Adding 58 model components to the UV plane model.
! The established model now contains 88 components and 0.967845 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.431 mas, bmaj=23.79 mas, bpa=-1.32 degrees
! Estimated noise=1.64913 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0278174 Jy
! Component: 100  -  total flux cleaned = 0.0421943 Jy
! Component: 150  -  total flux cleaned = 0.0506426 Jy
! Component: 200  -  total flux cleaned = 0.0557676 Jy
! Total flux subtracted in 200 components = 0.0557676 Jy
! Clean residual min=-0.006967 max=0.006125 Jy/beam
! Clean residual mean=-0.000057 rms=0.002119 Jy/beam
! Combined flux in latest and established models = 1.02361 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00312113 Jy
! Component: 100  -  total flux cleaned = 0.00502361 Jy
! Component: 150  -  total flux cleaned = 0.00560647 Jy
! Component: 200  -  total flux cleaned = 0.0058377 Jy
! Total flux subtracted in 200 components = 0.0058377 Jy
! Clean residual min=-0.005522 max=0.005840 Jy/beam
! Clean residual mean=-0.000035 rms=0.001744 Jy/beam
! Combined flux in latest and established models = 1.02945 Jy
! Adding 45 model components to the UV plane model.
! The established model now contains 125 components and 1.02945 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.721 mas, bmaj=6.646 mas, bpa=-0.2694 degrees
! Estimated noise=1.16285 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00366556 Jy
! Component: 100  -  total flux cleaned = -0.00413554 Jy
! Component: 150  -  total flux cleaned = -0.00416423 Jy
! Component: 200  -  total flux cleaned = -0.00402578 Jy
! Total flux subtracted in 200 components = -0.00402578 Jy
! Clean residual min=-0.009498 max=0.009928 Jy/beam
! Clean residual mean=-0.000018 rms=0.002054 Jy/beam
! Combined flux in latest and established models = 1.02542 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 137 components and 1.02542 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.124161Jy  sigma=0.994304
! Fit after  self-cal, rms=0.124004Jy  sigma=0.991259
wmodel J2101-4219_S_map.mod
! Writing 137 model components to file: J2101-4219_S_map.mod
wobs   J2101-4219_S_uvs.fits
! Writing UV FITS file: J2101-4219_S_uvs.fits
wwins  J2101-4219_S_map.win
! wwins: Wrote 2 windows to J2101-4219_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00101956 Jy
! Component: 100  -  total flux cleaned = -0.00076454 Jy
! Component: 150  -  total flux cleaned = -0.000655913 Jy
! Component: 200  -  total flux cleaned = -0.000948426 Jy
! Component: 250  -  total flux cleaned = -0.000771649 Jy
! Component: 300  -  total flux cleaned = -0.000196264 Jy
! Component: 350  -  total flux cleaned = 0.000416111 Jy
! Component: 400  -  total flux cleaned = 0.000773928 Jy
! Component: 450  -  total flux cleaned = 0.000977481 Jy
! Component: 500  -  total flux cleaned = 0.00110572 Jy
! Component: 550  -  total flux cleaned = 0.00122635 Jy
! Component: 600  -  total flux cleaned = 0.00122551 Jy
! Component: 650  -  total flux cleaned = 0.00122554 Jy
! Component: 700  -  total flux cleaned = 0.00101085 Jy
! Component: 750  -  total flux cleaned = 0.000907714 Jy
! Component: 800  -  total flux cleaned = 0.000710126 Jy
! Component: 850  -  total flux cleaned = 0.000568457 Jy
! Component: 900  -  total flux cleaned = 0.00038678 Jy
! Component: 950  -  total flux cleaned = 0.000254679 Jy
! Component: 1000  -  total flux cleaned = 0.000253289 Jy
! Component: 1050  -  total flux cleaned = 0.000294237 Jy
! Component: 1100  -  total flux cleaned = 0.000333382 Jy
! Component: 1150  -  total flux cleaned = 0.00033395 Jy
! Component: 1200  -  total flux cleaned = 0.000218589 Jy
! Component: 1250  -  total flux cleaned = 0.000218856 Jy
! Component: 1300  -  total flux cleaned = 7.11889e-05 Jy
! Component: 1350  -  total flux cleaned = 0.000107627 Jy
! Component: 1400  -  total flux cleaned = 0.000179261 Jy
! Component: 1450  -  total flux cleaned = 0.000144836 Jy
! Component: 1500  -  total flux cleaned = 0.000179995 Jy
! Component: 1550  -  total flux cleaned = 0.000180257 Jy
! Component: 1600  -  total flux cleaned = 0.000147396 Jy
! Component: 1650  -  total flux cleaned = 0.000180379 Jy
! Component: 1700  -  total flux cleaned = 0.000148466 Jy
! Component: 1750  -  total flux cleaned = 0.000211802 Jy
! Component: 1800  -  total flux cleaned = 0.000180601 Jy
! Component: 1850  -  total flux cleaned = 0.000211959 Jy
! Component: 1900  -  total flux cleaned = 0.000334019 Jy
! Component: 1950  -  total flux cleaned = 0.00042415 Jy
! Component: 2000  -  total flux cleaned = 0.000424232 Jy
! Component: 2050  -  total flux cleaned = 0.000570694 Jy
! Component: 2100  -  total flux cleaned = 0.000685973 Jy
! Component: 2150  -  total flux cleaned = 0.000714609 Jy
! Component: 2200  -  total flux cleaned = 0.000771057 Jy
! Component: 2250  -  total flux cleaned = 0.00088347 Jy
! Component: 2300  -  total flux cleaned = 0.000855371 Jy
! Component: 2350  -  total flux cleaned = 0.000910389 Jy
! Component: 2400  -  total flux cleaned = 0.000937853 Jy
! Component: 2450  -  total flux cleaned = 0.000965229 Jy
! Component: 2500  -  total flux cleaned = 0.00104617 Jy
! Component: 2550  -  total flux cleaned = 0.00101941 Jy
! Component: 2600  -  total flux cleaned = 0.00104601 Jy
! Component: 2650  -  total flux cleaned = 0.0010462 Jy
! Component: 2700  -  total flux cleaned = 0.00107274 Jy
! Component: 2750  -  total flux cleaned = 0.00109883 Jy
! Component: 2800  -  total flux cleaned = 0.00109881 Jy
! Component: 2850  -  total flux cleaned = 0.00109868 Jy
! Component: 2900  -  total flux cleaned = 0.00107282 Jy
! Component: 2950  -  total flux cleaned = 0.00104711 Jy
! Component: 3000  -  total flux cleaned = 0.000970346 Jy
! Component: 3050  -  total flux cleaned = 0.000944825 Jy
! Component: 3100  -  total flux cleaned = 0.000893975 Jy
! Component: 3150  -  total flux cleaned = 0.000817528 Jy
! Component: 3200  -  total flux cleaned = 0.000817541 Jy
! Component: 3250  -  total flux cleaned = 0.00079206 Jy
! Component: 3300  -  total flux cleaned = 0.000766519 Jy
! Component: 3350  -  total flux cleaned = 0.000766407 Jy
! Component: 3400  -  total flux cleaned = 0.000791966 Jy
! Component: 3450  -  total flux cleaned = 0.000740669 Jy
! Component: 3500  -  total flux cleaned = 0.000740578 Jy
! Component: 3550  -  total flux cleaned = 0.000792084 Jy
! Component: 3600  -  total flux cleaned = 0.000792016 Jy
! Component: 3650  -  total flux cleaned = 0.000817825 Jy
! Component: 3700  -  total flux cleaned = 0.000765431 Jy
! Component: 3750  -  total flux cleaned = 0.00081765 Jy
! Component: 3800  -  total flux cleaned = 0.000817512 Jy
! Component: 3850  -  total flux cleaned = 0.00079101 Jy
! Component: 3900  -  total flux cleaned = 0.000764474 Jy
! Component: 3950  -  total flux cleaned = 0.000710939 Jy
! Component: 4000  -  total flux cleaned = 0.000630119 Jy
! Component: 4050  -  total flux cleaned = 0.000603151 Jy
! Total flux subtracted in 4096 components = 0.000521476 Jy
! Clean residual min=-0.001697 max=0.001554 Jy/beam
! Clean residual mean=-0.000010 rms=0.000437 Jy/beam
! Combined flux in latest and established models = 1.02595 Jy
keep
! Adding 237 model components to the UV plane model.
! The established model now contains 374 components and 1.02595 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J2101-4219_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.721 x 6.646 at -0.2694 degrees (North through East)
! Clean map  min=-0.004096  max=0.55407 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J2101-4219_S_map.fits
wmodel /vlbi/uf001/uva//J2101-4219_S_map.mod
! Writing 374 model components to file: /vlbi/uf001/uva//J2101-4219_S_map.mod
wobs   /vlbi/uf001/uva//J2101-4219_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J2101-4219_S_uvs.fits
wwins  /vlbi/uf001/uva//J2101-4219_S_map.win
! wwins: Wrote 3 windows to /vlbi/uf001/uva//J2101-4219_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.554072 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000433968 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.23497 0.23497 0.46994 0.93988 1.87976 3.75952 7.51904 15.0381 30.0762 60.1523
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0013 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.554 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1276.76 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J2101-4219_S_dfm.log closed on Mon Jan 14 05:43:21 2019