! Started logfile: /vlbi/uf001/uva//J2049+1003_S_dfm.log on Mon Jan 14 05:39:04 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J2049+1003_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J2049+1003_S_uva.fits
! AN table 1: 42 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.818783 visibilities/baseline/integration-bin.
! Found source: J2049+1003
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 3714 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J2049+1003_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.110504Jy  sigma=18.560349
! Fit after  self-cal, rms=0.491304Jy  sigma=8.477008
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.879 mas, bmaj=6.417 mas, bpa=-0.9858 degrees
! Estimated noise=0.912901 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.393507 Jy
! Component: 100  -  total flux cleaned = 0.508494 Jy
! Total flux subtracted in 100 components = 0.508494 Jy
! Clean residual min=-0.020922 max=0.049821 Jy/beam
! Clean residual mean=-0.000091 rms=0.006338 Jy/beam
! Combined flux in latest and established models = 0.508494 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.508494 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.126670Jy  sigma=2.127502
! Fit after  self-cal, rms=0.125608Jy  sigma=2.107506
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0572193 Jy
! Component: 100  -  total flux cleaned = 0.0883925 Jy
! Total flux subtracted in 100 components = 0.0883925 Jy
! Clean residual min=-0.015315 max=0.026717 Jy/beam
! Clean residual mean=-0.000035 rms=0.003673 Jy/beam
! Combined flux in latest and established models = 0.596887 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 23 components and 0.596887 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.090113Jy  sigma=1.516291
! Fit after  self-cal, rms=0.089775Jy  sigma=1.511456
! Inverting map 
! Added new window around map position (-4, 4.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0252324 Jy
! Component: 100  -  total flux cleaned = 0.0394449 Jy
! Total flux subtracted in 100 components = 0.0394449 Jy
! Clean residual min=-0.012659 max=0.011571 Jy/beam
! Clean residual mean=-0.000011 rms=0.002862 Jy/beam
! Combined flux in latest and established models = 0.636332 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 39 components and 0.636332 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.081059Jy  sigma=1.365402
! Fit after  self-cal, rms=0.080545Jy  sigma=1.357602
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.336 mas, bmaj=6.969 mas, bpa=0.2364 degrees
! Estimated noise=0.747766 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0146345 Jy
! Component: 100  -  total flux cleaned = 0.0241182 Jy
! Component: 150  -  total flux cleaned = 0.0309184 Jy
! Component: 200  -  total flux cleaned = 0.0360865 Jy
! Total flux subtracted in 200 components = 0.0360865 Jy
! Clean residual min=-0.012204 max=0.009356 Jy/beam
! Clean residual mean=0.000018 rms=0.002674 Jy/beam
! Combined flux in latest and established models = 0.672418 Jy
! Performing phase self-cal
! Adding 41 model components to the UV plane model.
! The established model now contains 74 components and 0.672418 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077275Jy  sigma=1.301916
! Fit after  self-cal, rms=0.077115Jy  sigma=1.299341
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.336 x 6.969 at 0.2364 degrees (North through East)
! Clean map  min=-0.011657  max=0.5085 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     HN        1.02     KP        1.02     LA        0.96     
!   MK        1.03     NL        1.07     OV        0.98     PT        1.01     
!   SC        1.03     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     HN        1.02     KP        1.04     LA        0.98     
!   MK        1.00     NL        1.05     OV        0.82     PT        1.00     
!   SC        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     HN        1.02     KP        1.02     LA        0.96     
!   MK        1.01     NL        1.04     OV        0.95     PT        1.00     
!   SC        1.00     
! 
! 
! Fit before self-cal, rms=0.077115Jy  sigma=1.299341
! Fit after  self-cal, rms=0.066185Jy  sigma=1.077390
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.348 mas, bmaj=7.027 mas, bpa=0.3408 degrees
! Estimated noise=0.749542 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0015157 Jy
! Component: 100  -  total flux cleaned = -0.0021196 Jy
! Component: 150  -  total flux cleaned = -0.00271059 Jy
! Component: 200  -  total flux cleaned = -0.00320241 Jy
! Total flux subtracted in 200 components = -0.00320241 Jy
! Clean residual min=-0.004192 max=0.005263 Jy/beam
! Clean residual mean=0.000009 rms=0.001087 Jy/beam
! Combined flux in latest and established models = 0.669216 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 82 components and 0.669216 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.065949Jy  sigma=1.072902
! Fit after  self-cal, rms=0.065951Jy  sigma=1.072221
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.065951Jy  sigma=1.072221
! Fit after  self-cal, rms=0.064515Jy  sigma=1.044396
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.351 mas, bmaj=7.024 mas, bpa=0.3329 degrees
! Estimated noise=0.749943 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000921846 Jy
! Component: 100  -  total flux cleaned = -0.00123213 Jy
! Component: 150  -  total flux cleaned = -0.00144725 Jy
! Component: 200  -  total flux cleaned = -0.00159439 Jy
! Total flux subtracted in 200 components = -0.00159439 Jy
! Clean residual min=-0.002984 max=0.003177 Jy/beam
! Clean residual mean=0.000002 rms=0.000734 Jy/beam
! Combined flux in latest and established models = 0.667621 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 91 components and 0.667621 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064378Jy  sigma=1.042015
! Fit after  self-cal, rms=0.064353Jy  sigma=1.041653
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (56, 45.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00180278 Jy
! Component: 100  -  total flux cleaned = 0.00224452 Jy
! Component: 150  -  total flux cleaned = 0.00230594 Jy
! Component: 200  -  total flux cleaned = 0.00225058 Jy
! Total flux subtracted in 200 components = 0.00225058 Jy
! Clean residual min=-0.003017 max=0.002657 Jy/beam
! Clean residual mean=-0.000000 rms=0.000673 Jy/beam
! Combined flux in latest and established models = 0.669872 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 108 components and 0.669872 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064185Jy  sigma=1.038738
! Fit after  self-cal, rms=0.064172Jy  sigma=1.038605
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064172Jy  sigma=1.038605
! Fit after  self-cal, rms=0.064172Jy  sigma=1.037968
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.35 mas, bmaj=7.025 mas, bpa=0.271 degrees
! Estimated noise=0.749661 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000256411 Jy
! Component: 100  -  total flux cleaned = -0.00015537 Jy
! Component: 150  -  total flux cleaned = -0.000152078 Jy
! Component: 200  -  total flux cleaned = -0.00015067 Jy
! Total flux subtracted in 200 components = -0.00015067 Jy
! Clean residual min=-0.002926 max=0.002648 Jy/beam
! Clean residual mean=-0.000000 rms=0.000633 Jy/beam
! Combined flux in latest and established models = 0.669721 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 118 components and 0.669721 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064098Jy  sigma=1.036694
! Fit after  self-cal, rms=0.064087Jy  sigma=1.036575
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000212692 Jy
! Component: 100  -  total flux cleaned = -0.000210643 Jy
! Component: 150  -  total flux cleaned = -0.000277143 Jy
! Component: 200  -  total flux cleaned = -0.000277767 Jy
! Total flux subtracted in 200 components = -0.000277767 Jy
! Clean residual min=-0.002817 max=0.002558 Jy/beam
! Clean residual mean=-0.000000 rms=0.000619 Jy/beam
! Combined flux in latest and established models = 0.669443 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 125 components and 0.669443 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064050Jy  sigma=1.035920
! Fit after  self-cal, rms=0.064042Jy  sigma=1.035851
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064042Jy  sigma=1.035851
! Fit after  self-cal, rms=0.064043Jy  sigma=1.035720
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.859 mas, bmaj=10.65 mas, bpa=-2.229 degrees
! Estimated noise=0.98403 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00127708 Jy
! Component: 100  -  total flux cleaned = -0.00125873 Jy
! Component: 150  -  total flux cleaned = -0.00118041 Jy
! Component: 200  -  total flux cleaned = -0.00113433 Jy
! Total flux subtracted in 200 components = -0.00113433 Jy
! Clean residual min=-0.002982 max=0.002662 Jy/beam
! Clean residual mean=-0.000002 rms=0.000716 Jy/beam
! Combined flux in latest and established models = 0.668309 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 136 components and 0.668309 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064027Jy  sigma=1.035555
! Fit after  self-cal, rms=0.064021Jy  sigma=1.035501
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000243389 Jy
! Component: 100  -  total flux cleaned = -0.000219122 Jy
! Component: 150  -  total flux cleaned = -0.000258554 Jy
! Component: 200  -  total flux cleaned = -0.000240354 Jy
! Total flux subtracted in 200 components = -0.000240354 Jy
! Clean residual min=-0.002883 max=0.002570 Jy/beam
! Clean residual mean=-0.000002 rms=0.000708 Jy/beam
! Combined flux in latest and established models = 0.668069 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 137 components and 0.668069 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064018Jy  sigma=1.035466
! Fit after  self-cal, rms=0.064013Jy  sigma=1.035437
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.351 mas, bmaj=7.027 mas, bpa=0.2278 degrees
! Estimated noise=0.749485 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.351 x 7.027 at 0.2278 degrees (North through East)
! Clean map  min=-0.0024504  max=0.50966 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064013Jy  sigma=1.035437
! Fit after  self-cal, rms=0.059375Jy  sigma=0.945645
! Inverting map and beam 
! Estimated beam: bmin=3.353 mas, bmaj=7.032 mas, bpa=0.2096 degrees
! Estimated noise=0.749359 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000734957 Jy
! Component: 100  -  total flux cleaned = -0.000956586 Jy
! Component: 150  -  total flux cleaned = -0.000984611 Jy
! Component: 200  -  total flux cleaned = -0.00101138 Jy
! Total flux subtracted in 200 components = -0.00101138 Jy
! Clean residual min=-0.002620 max=0.002425 Jy/beam
! Clean residual mean=0.000000 rms=0.000589 Jy/beam
! Combined flux in latest and established models = 0.667057 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 153 components and 0.667057 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059344Jy  sigma=0.945076
! Fit after  self-cal, rms=0.059338Jy  sigma=0.945032
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000123193 Jy
! Component: 100  -  total flux cleaned = -9.82768e-05 Jy
! Component: 150  -  total flux cleaned = -9.79999e-05 Jy
! Component: 200  -  total flux cleaned = -9.82922e-05 Jy
! Total flux subtracted in 200 components = -9.82922e-05 Jy
! Clean residual min=-0.002547 max=0.002391 Jy/beam
! Clean residual mean=-0.000000 rms=0.000583 Jy/beam
! Combined flux in latest and established models = 0.666959 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 158 components and 0.666959 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059319Jy  sigma=0.944702
! Fit after  self-cal, rms=0.059316Jy  sigma=0.944676
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059316Jy  sigma=0.944676
! Fit after  self-cal, rms=0.059310Jy  sigma=0.944614
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.89 mas, bmaj=6.45 mas, bpa=-0.9512 degrees
! Estimated noise=0.91784 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.394814 Jy
! Component: 100  -  total flux cleaned = 0.514415 Jy
! Component: 150  -  total flux cleaned = 0.570958 Jy
! Component: 200  -  total flux cleaned = 0.60312 Jy
! Total flux subtracted in 200 components = 0.60312 Jy
! Clean residual min=-0.008680 max=0.016355 Jy/beam
! Clean residual mean=-0.000035 rms=0.002140 Jy/beam
! Combined flux in latest and established models = 0.60312 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 21 model components to the UV plane model.
! The established model now contains 21 components and 0.60312 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.353 mas, bmaj=7.033 mas, bpa=0.176 degrees
! Estimated noise=0.749181 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.023009 Jy
! Component: 100  -  total flux cleaned = 0.0362036 Jy
! Component: 150  -  total flux cleaned = 0.0440766 Jy
! Component: 200  -  total flux cleaned = 0.0491824 Jy
! Total flux subtracted in 200 components = 0.0491824 Jy
! Clean residual min=-0.003439 max=0.003278 Jy/beam
! Clean residual mean=-0.000011 rms=0.000790 Jy/beam
! Combined flux in latest and established models = 0.652302 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 48 components and 0.652302 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.861 mas, bmaj=10.66 mas, bpa=-2.271 degrees
! Estimated noise=0.982526 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00468131 Jy
! Component: 100  -  total flux cleaned = 0.00758532 Jy
! Component: 150  -  total flux cleaned = 0.00902362 Jy
! Component: 200  -  total flux cleaned = 0.00989121 Jy
! Total flux subtracted in 200 components = 0.00989121 Jy
! Clean residual min=-0.003321 max=0.002526 Jy/beam
! Clean residual mean=-0.000008 rms=0.000748 Jy/beam
! Combined flux in latest and established models = 0.662193 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00077924 Jy
! Component: 100  -  total flux cleaned = 0.00138032 Jy
! Component: 150  -  total flux cleaned = 0.00192592 Jy
! Component: 200  -  total flux cleaned = 0.00224844 Jy
! Total flux subtracted in 200 components = 0.00224844 Jy
! Clean residual min=-0.003050 max=0.002455 Jy/beam
! Clean residual mean=-0.000004 rms=0.000705 Jy/beam
! Combined flux in latest and established models = 0.664442 Jy
! Adding 41 model components to the UV plane model.
! The established model now contains 81 components and 0.664442 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.353 mas, bmaj=7.033 mas, bpa=0.176 degrees
! Estimated noise=0.749181 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000941201 Jy
! Component: 100  -  total flux cleaned = -0.000739329 Jy
! Component: 150  -  total flux cleaned = -0.000547723 Jy
! Component: 200  -  total flux cleaned = -0.000543232 Jy
! Total flux subtracted in 200 components = -0.000543232 Jy
! Clean residual min=-0.002648 max=0.002800 Jy/beam
! Clean residual mean=-0.000002 rms=0.000627 Jy/beam
! Combined flux in latest and established models = 0.663899 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 96 components and 0.663899 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059521Jy  sigma=0.948102
! Fit after  self-cal, rms=0.059490Jy  sigma=0.947642
wmodel J2049+1003_S_map.mod
! Writing 96 model components to file: J2049+1003_S_map.mod
wobs   J2049+1003_S_uvs.fits
! Writing UV FITS file: J2049+1003_S_uvs.fits
wwins  J2049+1003_S_map.win
! wwins: Wrote 3 windows to J2049+1003_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000222881 Jy
! Component: 100  -  total flux cleaned = -0.000613421 Jy
! Component: 150  -  total flux cleaned = -0.000737137 Jy
! Component: 200  -  total flux cleaned = -0.00101264 Jy
! Component: 250  -  total flux cleaned = -0.00116393 Jy
! Component: 300  -  total flux cleaned = -0.00127353 Jy
! Component: 350  -  total flux cleaned = -0.00148697 Jy
! Component: 400  -  total flux cleaned = -0.00159048 Jy
! Component: 450  -  total flux cleaned = -0.0016913 Jy
! Component: 500  -  total flux cleaned = -0.00169101 Jy
! Component: 550  -  total flux cleaned = -0.00175585 Jy
! Component: 600  -  total flux cleaned = -0.00169226 Jy
! Component: 650  -  total flux cleaned = -0.00169256 Jy
! Component: 700  -  total flux cleaned = -0.00172338 Jy
! Component: 750  -  total flux cleaned = -0.0016335 Jy
! Component: 800  -  total flux cleaned = -0.00154484 Jy
! Component: 850  -  total flux cleaned = -0.00154488 Jy
! Component: 900  -  total flux cleaned = -0.00137195 Jy
! Component: 950  -  total flux cleaned = -0.0013721 Jy
! Component: 1000  -  total flux cleaned = -0.00128827 Jy
! Component: 1050  -  total flux cleaned = -0.00128822 Jy
! Component: 1100  -  total flux cleaned = -0.00120715 Jy
! Component: 1150  -  total flux cleaned = -0.00126088 Jy
! Component: 1200  -  total flux cleaned = -0.0012346 Jy
! Component: 1250  -  total flux cleaned = -0.00120878 Jy
! Component: 1300  -  total flux cleaned = -0.00118309 Jy
! Component: 1350  -  total flux cleaned = -0.00125963 Jy
! Component: 1400  -  total flux cleaned = -0.0012344 Jy
! Component: 1450  -  total flux cleaned = -0.00120949 Jy
! Component: 1500  -  total flux cleaned = -0.00123463 Jy
! Component: 1550  -  total flux cleaned = -0.00125924 Jy
! Component: 1600  -  total flux cleaned = -0.00125945 Jy
! Component: 1650  -  total flux cleaned = -0.00130699 Jy
! Component: 1700  -  total flux cleaned = -0.00125929 Jy
! Component: 1750  -  total flux cleaned = -0.00125935 Jy
! Component: 1800  -  total flux cleaned = -0.00116672 Jy
! Component: 1850  -  total flux cleaned = -0.00118985 Jy
! Component: 1900  -  total flux cleaned = -0.00123497 Jy
! Component: 1950  -  total flux cleaned = -0.0012126 Jy
! Component: 2000  -  total flux cleaned = -0.00119009 Jy
! Component: 2050  -  total flux cleaned = -0.00121205 Jy
! Component: 2100  -  total flux cleaned = -0.00114668 Jy
! Component: 2150  -  total flux cleaned = -0.00110363 Jy
! Component: 2200  -  total flux cleaned = -0.00114671 Jy
! Component: 2250  -  total flux cleaned = -0.00110428 Jy
! Component: 2300  -  total flux cleaned = -0.00108346 Jy
! Component: 2350  -  total flux cleaned = -0.00104191 Jy
! Component: 2400  -  total flux cleaned = -0.00108327 Jy
! Component: 2450  -  total flux cleaned = -0.00102185 Jy
! Component: 2500  -  total flux cleaned = -0.00104223 Jy
! Component: 2550  -  total flux cleaned = -0.00102171 Jy
! Component: 2600  -  total flux cleaned = -0.00106132 Jy
! Component: 2650  -  total flux cleaned = -0.000962207 Jy
! Component: 2700  -  total flux cleaned = -0.00102127 Jy
! Component: 2750  -  total flux cleaned = -0.0010408 Jy
! Component: 2800  -  total flux cleaned = -0.000963436 Jy
! Component: 2850  -  total flux cleaned = -0.00104011 Jy
! Component: 2900  -  total flux cleaned = -0.00100193 Jy
! Component: 2950  -  total flux cleaned = -0.00109654 Jy
! Component: 3000  -  total flux cleaned = -0.00109629 Jy
! Component: 3050  -  total flux cleaned = -0.00107764 Jy
! Component: 3100  -  total flux cleaned = -0.00102223 Jy
! Component: 3150  -  total flux cleaned = -0.00104075 Jy
! Component: 3200  -  total flux cleaned = -0.000968078 Jy
! Component: 3250  -  total flux cleaned = -0.000986065 Jy
! Component: 3300  -  total flux cleaned = -0.000968111 Jy
! Component: 3350  -  total flux cleaned = -0.000879013 Jy
! Component: 3400  -  total flux cleaned = -0.000861537 Jy
! Component: 3450  -  total flux cleaned = -0.000826252 Jy
! Component: 3500  -  total flux cleaned = -0.00075662 Jy
! Component: 3550  -  total flux cleaned = -0.00075673 Jy
! Component: 3600  -  total flux cleaned = -0.000773961 Jy
! Component: 3650  -  total flux cleaned = -0.000722508 Jy
! Component: 3700  -  total flux cleaned = -0.00067128 Jy
! Component: 3750  -  total flux cleaned = -0.000705075 Jy
! Component: 3800  -  total flux cleaned = -0.000638084 Jy
! Component: 3850  -  total flux cleaned = -0.000604837 Jy
! Component: 3900  -  total flux cleaned = -0.000654427 Jy
! Component: 3950  -  total flux cleaned = -0.000621544 Jy
! Component: 4000  -  total flux cleaned = -0.000654141 Jy
! Component: 4050  -  total flux cleaned = -0.000589151 Jy
! Total flux subtracted in 4096 components = -0.000508545 Jy
! Clean residual min=-0.000889 max=0.000864 Jy/beam
! Clean residual mean=0.000001 rms=0.000290 Jy/beam
! Combined flux in latest and established models = 0.66339 Jy
keep
! Adding 283 model components to the UV plane model.
! The established model now contains 379 components and 0.66339 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J2049+1003_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.353 x 7.033 at 0.176 degrees (North through East)
! Clean map  min=-0.0020091  max=0.51099 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J2049+1003_S_map.fits
wmodel /vlbi/uf001/uva//J2049+1003_S_map.mod
! Writing 379 model components to file: /vlbi/uf001/uva//J2049+1003_S_map.mod
wobs   /vlbi/uf001/uva//J2049+1003_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J2049+1003_S_uvs.fits
wwins  /vlbi/uf001/uva//J2049+1003_S_map.win
! wwins: Wrote 4 windows to /vlbi/uf001/uva//J2049+1003_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.510994 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000285479 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.167602 0.167602 0.335205 0.67041 1.34082 2.68164 5.36328 10.7266 21.4531 42.9062 85.8124
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.51 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1789.95 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J2049+1003_S_dfm.log closed on Mon Jan 14 05:39:09 2019