! Started logfile: /vlbi/uf001/uva//J2036-2830_S_dfm.log on Mon Jan 14 05:34:16 2019 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /vlbi/uf001/uva//J2036-2830_S_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J2036-2830_S_uva.fits ! AN table 1: 38 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.881287 visibilities/baseline/integration-bin. ! Found source: J2036-2830 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 44 lines of history. ! ! Reading 4521 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J2036-2830_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.020791Jy sigma=16.977685 ! Fit after self-cal, rms=0.861787Jy sigma=14.233959 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.484 mas, bmaj=6.819 mas, bpa=-7.611 degrees ! Estimated noise=0.842559 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.113054 Jy ! Component: 100 - total flux cleaned = 0.137773 Jy ! Total flux subtracted in 100 components = 0.137773 Jy ! Clean residual min=-0.007242 max=0.008968 Jy/beam ! Clean residual mean=-0.000054 rms=0.001922 Jy/beam ! Combined flux in latest and established models = 0.137773 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.137773 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.090802Jy sigma=1.392968 ! Fit after self-cal, rms=0.090724Jy sigma=1.392627 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.001 mas, bmaj=7.865 mas, bpa=-6.55 degrees ! Estimated noise=0.6538 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3.5, -6.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0116006 Jy ! Component: 100 - total flux cleaned = 0.0185863 Jy ! Component: 150 - total flux cleaned = 0.0232901 Jy ! Component: 200 - total flux cleaned = 0.026529 Jy ! Total flux subtracted in 200 components = 0.026529 Jy ! Clean residual min=-0.005445 max=0.006823 Jy/beam ! Clean residual mean=-0.000020 rms=0.001397 Jy/beam ! Combined flux in latest and established models = 0.164302 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 34 components and 0.164302 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.089287Jy sigma=1.359762 ! Fit after self-cal, rms=0.089272Jy sigma=1.358531 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.001 x 7.865 at -6.55 degrees (North through East) ! Clean map min=-0.005269 max=0.13874 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.00 HN 1.21 KP 0.99 ! LA 0.87 MK 1.02 NL 1.07 OV 0.97 ! PT 0.91 SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.97 HN 1.19 KP 1.01 ! LA 0.91 MK 1.02 NL 1.08 OV 0.93 ! PT 1.00 SC 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.92 HN 1.19 KP 1.00 ! LA 0.95 MK 1.02 NL 0.98 OV 0.97 ! PT 1.05 SC 0.97 ! ! ! Fit before self-cal, rms=0.089272Jy sigma=1.358531 ! Fit after self-cal, rms=0.092926Jy sigma=1.336934 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.037 mas, bmaj=7.869 mas, bpa=-5.988 degrees ! Estimated noise=0.655538 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00221419 Jy ! Component: 100 - total flux cleaned = -0.00251928 Jy ! Component: 150 - total flux cleaned = -0.00276963 Jy ! Component: 200 - total flux cleaned = -0.00293549 Jy ! Total flux subtracted in 200 components = -0.00293549 Jy ! Clean residual min=-0.004397 max=0.003887 Jy/beam ! Clean residual mean=-0.000010 rms=0.001034 Jy/beam ! Combined flux in latest and established models = 0.161367 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 55 components and 0.161367 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.092783Jy sigma=1.335267 ! Fit after self-cal, rms=0.092943Jy sigma=1.334760 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.092943Jy sigma=1.334760 ! Fit after self-cal, rms=0.096880Jy sigma=1.325864 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.047 mas, bmaj=7.885 mas, bpa=-6.15 degrees ! Estimated noise=0.657533 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000987137 Jy ! Component: 100 - total flux cleaned = -0.00103285 Jy ! Component: 150 - total flux cleaned = -0.000955031 Jy ! Component: 200 - total flux cleaned = -0.000851851 Jy ! Total flux subtracted in 200 components = -0.000851851 Jy ! Clean residual min=-0.003758 max=0.003470 Jy/beam ! Clean residual mean=-0.000001 rms=0.000866 Jy/beam ! Combined flux in latest and established models = 0.160515 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 77 components and 0.160515 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.096823Jy sigma=1.325260 ! Fit after self-cal, rms=0.096878Jy sigma=1.325089 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000464121 Jy ! Component: 100 - total flux cleaned = -0.000334904 Jy ! Component: 150 - total flux cleaned = -0.00024686 Jy ! Component: 200 - total flux cleaned = -0.000137272 Jy ! Total flux subtracted in 200 components = -0.000137272 Jy ! Clean residual min=-0.003690 max=0.003486 Jy/beam ! Clean residual mean=-0.000002 rms=0.000860 Jy/beam ! Combined flux in latest and established models = 0.160377 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 84 components and 0.160377 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.096855Jy sigma=1.324799 ! Fit after self-cal, rms=0.096849Jy sigma=1.324767 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.096849Jy sigma=1.324767 ! Fit after self-cal, rms=0.099482Jy sigma=1.323951 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.05 mas, bmaj=7.898 mas, bpa=-6.199 degrees ! Estimated noise=0.657047 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000579168 Jy ! Component: 100 - total flux cleaned = -0.00057552 Jy ! Component: 150 - total flux cleaned = -0.000509373 Jy ! Component: 200 - total flux cleaned = -0.000452867 Jy ! Total flux subtracted in 200 components = -0.000452867 Jy ! Clean residual min=-0.003483 max=0.003566 Jy/beam ! Clean residual mean=0.000001 rms=0.000835 Jy/beam ! Combined flux in latest and established models = 0.159925 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 94 components and 0.159925 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.099436Jy sigma=1.323630 ! Fit after self-cal, rms=0.099459Jy sigma=1.323570 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-48.5, -91). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00270388 Jy ! Component: 100 - total flux cleaned = 0.00262434 Jy ! Component: 150 - total flux cleaned = 0.00262547 Jy ! Component: 200 - total flux cleaned = 0.00252122 Jy ! Total flux subtracted in 200 components = 0.00252122 Jy ! Clean residual min=-0.003164 max=0.002972 Jy/beam ! Clean residual mean=0.000000 rms=0.000796 Jy/beam ! Combined flux in latest and established models = 0.162446 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 111 components and 0.162446 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.099334Jy sigma=1.321270 ! Fit after self-cal, rms=0.099328Jy sigma=1.321124 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.099328Jy sigma=1.321124 ! Fit after self-cal, rms=0.099641Jy sigma=1.320931 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.667 mas, bmaj=18.6 mas, bpa=-0.8243 degrees ! Estimated noise=0.81994 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000340251 Jy ! Component: 100 - total flux cleaned = 0.000342709 Jy ! Component: 150 - total flux cleaned = 0.00034129 Jy ! Component: 200 - total flux cleaned = 0.000311471 Jy ! Total flux subtracted in 200 components = 0.000311471 Jy ! Clean residual min=-0.003581 max=0.003799 Jy/beam ! Clean residual mean=0.000001 rms=0.001025 Jy/beam ! Combined flux in latest and established models = 0.162757 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 130 components and 0.162757 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.099626Jy sigma=1.320815 ! Fit after self-cal, rms=0.099627Jy sigma=1.320786 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.34097e-05 Jy ! Component: 100 - total flux cleaned = 1.10366e-05 Jy ! Component: 150 - total flux cleaned = 1.04361e-05 Jy ! Component: 200 - total flux cleaned = 1.11148e-05 Jy ! Total flux subtracted in 200 components = 1.11148e-05 Jy ! Clean residual min=-0.003616 max=0.003800 Jy/beam ! Clean residual mean=0.000000 rms=0.001021 Jy/beam ! Combined flux in latest and established models = 0.162768 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 143 components and 0.162768 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.099615Jy sigma=1.320740 ! Fit after self-cal, rms=0.099613Jy sigma=1.320733 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.048 mas, bmaj=7.89 mas, bpa=-6.132 degrees ! Estimated noise=0.655063 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.048 x 7.89 at -6.132 degrees (North through East) ! Clean map min=-0.0030891 max=0.13935 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.517 mas, bmaj=6.825 mas, bpa=-7.065 degrees ! Estimated noise=0.843036 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.113007 Jy ! Component: 100 - total flux cleaned = 0.137708 Jy ! Component: 150 - total flux cleaned = 0.14487 Jy ! Component: 200 - total flux cleaned = 0.149772 Jy ! Total flux subtracted in 200 components = 0.149772 Jy ! Clean residual min=-0.004293 max=0.004056 Jy/beam ! Clean residual mean=-0.000014 rms=0.001013 Jy/beam ! Combined flux in latest and established models = 0.149772 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.149772 Jy ! Inverting map and beam ! Estimated beam: bmin=3.048 mas, bmaj=7.89 mas, bpa=-6.132 degrees ! Estimated noise=0.655063 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00459435 Jy ! Component: 100 - total flux cleaned = 0.00702832 Jy ! Component: 150 - total flux cleaned = 0.00797431 Jy ! Component: 200 - total flux cleaned = 0.00869159 Jy ! Total flux subtracted in 200 components = 0.00869159 Jy ! Clean residual min=-0.003331 max=0.003209 Jy/beam ! Clean residual mean=-0.000005 rms=0.000825 Jy/beam ! Combined flux in latest and established models = 0.158464 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 44 components and 0.158464 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.667 mas, bmaj=18.6 mas, bpa=-0.8243 degrees ! Estimated noise=0.81994 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00114771 Jy ! Component: 100 - total flux cleaned = 0.0018415 Jy ! Component: 150 - total flux cleaned = 0.00206915 Jy ! Component: 200 - total flux cleaned = 0.00214501 Jy ! Total flux subtracted in 200 components = 0.00214501 Jy ! Clean residual min=-0.003714 max=0.003875 Jy/beam ! Clean residual mean=-0.000001 rms=0.001052 Jy/beam ! Combined flux in latest and established models = 0.160609 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000105108 Jy ! Component: 100 - total flux cleaned = 0.000202951 Jy ! Component: 150 - total flux cleaned = 0.000294012 Jy ! Component: 200 - total flux cleaned = 0.000381027 Jy ! Total flux subtracted in 200 components = 0.000381027 Jy ! Clean residual min=-0.003681 max=0.003895 Jy/beam ! Clean residual mean=-0.000001 rms=0.001040 Jy/beam ! Combined flux in latest and established models = 0.16099 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 81 components and 0.16099 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.048 mas, bmaj=7.89 mas, bpa=-6.132 degrees ! Estimated noise=0.655063 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000138952 Jy ! Component: 100 - total flux cleaned = -4.97361e-05 Jy ! Component: 150 - total flux cleaned = -4.76809e-05 Jy ! Component: 200 - total flux cleaned = -4.64365e-05 Jy ! Total flux subtracted in 200 components = -4.64365e-05 Jy ! Clean residual min=-0.003281 max=0.003218 Jy/beam ! Clean residual mean=-0.000002 rms=0.000784 Jy/beam ! Combined flux in latest and established models = 0.160944 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 97 components and 0.160944 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.099651Jy sigma=1.320602 ! Fit after self-cal, rms=0.099622Jy sigma=1.320435 wmodel J2036-2830_S_map.mod ! Writing 97 model components to file: J2036-2830_S_map.mod wobs J2036-2830_S_uvs.fits ! Writing UV FITS file: J2036-2830_S_uvs.fits wwins J2036-2830_S_map.win ! wwins: Wrote 3 windows to J2036-2830_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000715924 Jy ! Component: 100 - total flux cleaned = -0.00135743 Jy ! Component: 150 - total flux cleaned = -0.0018575 Jy ! Component: 200 - total flux cleaned = -0.00200015 Jy ! Component: 250 - total flux cleaned = -0.00199914 Jy ! Component: 300 - total flux cleaned = -0.00217407 Jy ! Component: 350 - total flux cleaned = -0.00225928 Jy ! Component: 400 - total flux cleaned = -0.00242417 Jy ! Component: 450 - total flux cleaned = -0.00262472 Jy ! Component: 500 - total flux cleaned = -0.00289842 Jy ! Component: 550 - total flux cleaned = -0.00305067 Jy ! Component: 600 - total flux cleaned = -0.00323781 Jy ! Component: 650 - total flux cleaned = -0.00352962 Jy ! Component: 700 - total flux cleaned = -0.0036369 Jy ! Component: 750 - total flux cleaned = -0.0038465 Jy ! Component: 800 - total flux cleaned = -0.00398445 Jy ! Component: 850 - total flux cleaned = -0.00422027 Jy ! Component: 900 - total flux cleaned = -0.00425388 Jy ! Component: 950 - total flux cleaned = -0.0043513 Jy ! Component: 1000 - total flux cleaned = -0.00438332 Jy ! Component: 1050 - total flux cleaned = -0.00450948 Jy ! Component: 1100 - total flux cleaned = -0.00457121 Jy ! Component: 1150 - total flux cleaned = -0.00463221 Jy ! Component: 1200 - total flux cleaned = -0.00466238 Jy ! Component: 1250 - total flux cleaned = -0.00469209 Jy ! Component: 1300 - total flux cleaned = -0.00486557 Jy ! Component: 1350 - total flux cleaned = -0.00495031 Jy ! Component: 1400 - total flux cleaned = -0.00500638 Jy ! Component: 1450 - total flux cleaned = -0.00506138 Jy ! Component: 1500 - total flux cleaned = -0.00508905 Jy ! Component: 1550 - total flux cleaned = -0.00511612 Jy ! Component: 1600 - total flux cleaned = -0.00519611 Jy ! Component: 1650 - total flux cleaned = -0.00519642 Jy ! Component: 1700 - total flux cleaned = -0.00519665 Jy ! Component: 1750 - total flux cleaned = -0.00524824 Jy ! Component: 1800 - total flux cleaned = -0.00529913 Jy ! Component: 1850 - total flux cleaned = -0.00539935 Jy ! Component: 1900 - total flux cleaned = -0.00537477 Jy ! Component: 1950 - total flux cleaned = -0.00537487 Jy ! Component: 2000 - total flux cleaned = -0.00554404 Jy ! Component: 2050 - total flux cleaned = -0.00551997 Jy ! Component: 2100 - total flux cleaned = -0.00559097 Jy ! Component: 2150 - total flux cleaned = -0.00552067 Jy ! Component: 2200 - total flux cleaned = -0.00554412 Jy ! Component: 2250 - total flux cleaned = -0.00547556 Jy ! Component: 2300 - total flux cleaned = -0.00547512 Jy ! Component: 2350 - total flux cleaned = -0.00552006 Jy ! Component: 2400 - total flux cleaned = -0.00543087 Jy ! Component: 2450 - total flux cleaned = -0.00543087 Jy ! Component: 2500 - total flux cleaned = -0.00549663 Jy ! Component: 2550 - total flux cleaned = -0.00540973 Jy ! Component: 2600 - total flux cleaned = -0.00543142 Jy ! Component: 2650 - total flux cleaned = -0.00543147 Jy ! Component: 2700 - total flux cleaned = -0.0054733 Jy ! Component: 2750 - total flux cleaned = -0.00545214 Jy ! Component: 2800 - total flux cleaned = -0.00543151 Jy ! Component: 2850 - total flux cleaned = -0.00536986 Jy ! Component: 2900 - total flux cleaned = -0.00532932 Jy ! Component: 2950 - total flux cleaned = -0.00538981 Jy ! Component: 3000 - total flux cleaned = -0.00525011 Jy ! Component: 3050 - total flux cleaned = -0.00526991 Jy ! Component: 3100 - total flux cleaned = -0.00519155 Jy ! Component: 3150 - total flux cleaned = -0.00515275 Jy ! Component: 3200 - total flux cleaned = -0.00513347 Jy ! Component: 3250 - total flux cleaned = -0.00505707 Jy ! Component: 3300 - total flux cleaned = -0.00505686 Jy ! Component: 3350 - total flux cleaned = -0.00498139 Jy ! Component: 3400 - total flux cleaned = -0.00494414 Jy ! Component: 3450 - total flux cleaned = -0.00494403 Jy ! Component: 3500 - total flux cleaned = -0.00479705 Jy ! Component: 3550 - total flux cleaned = -0.00483347 Jy ! Component: 3600 - total flux cleaned = -0.00472471 Jy ! Component: 3650 - total flux cleaned = -0.00474264 Jy ! Component: 3700 - total flux cleaned = -0.00463573 Jy ! Component: 3750 - total flux cleaned = -0.00454725 Jy ! Component: 3800 - total flux cleaned = -0.00449448 Jy ! Component: 3850 - total flux cleaned = -0.00442485 Jy ! Component: 3900 - total flux cleaned = -0.00444204 Jy ! Component: 3950 - total flux cleaned = -0.00432158 Jy ! Component: 4000 - total flux cleaned = -0.0043386 Jy ! Component: 4050 - total flux cleaned = -0.00423681 Jy ! Total flux subtracted in 4096 components = -0.0042031 Jy ! Clean residual min=-0.001051 max=0.000945 Jy/beam ! Clean residual mean=0.000001 rms=0.000298 Jy/beam ! Combined flux in latest and established models = 0.15674 Jy keep ! Adding 271 model components to the UV plane model. ! The established model now contains 368 components and 0.156741 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J2036-2830_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.048 x 7.89 at -6.132 degrees (North through East) ! Clean map min=-0.0024507 max=0.14185 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J2036-2830_S_map.fits wmodel /vlbi/uf001/uva//J2036-2830_S_map.mod ! Writing 368 model components to file: /vlbi/uf001/uva//J2036-2830_S_map.mod wobs /vlbi/uf001/uva//J2036-2830_S_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J2036-2830_S_uvs.fits wwins /vlbi/uf001/uva//J2036-2830_S_map.win ! wwins: Wrote 4 windows to /vlbi/uf001/uva//J2036-2830_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.141849 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000292887 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.619435 0.619435 1.23887 2.47774 4.95548 9.91097 19.8219 39.6439 79.2877 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.141 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 484.311 quit ! Quitting program ! Log file /vlbi/uf001/uva//J2036-2830_S_dfm.log closed on Mon Jan 14 05:34:21 2019