! Started logfile: /vlbi/uf001/uva//J2035+1056_X_dfm.log on Mon Jan 14 05:33:11 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uva//J2035+1056_X_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J2035+1056_X_uva.fits ! AN table 1: 59 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.6629 visibilities/baseline/integration-bin. ! Found source: J2035+1056 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 21120 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J2035+1056_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 195 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 195 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 195 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 195 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 195 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 195 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 195 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 195 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 195 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 195 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 195 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 195 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.193116Jy sigma=21.916249 ! Fit after self-cal, rms=0.382651Jy sigma=7.124021 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6975 mas, bmaj=1.845 mas, bpa=-7.376 degrees ! Estimated noise=0.453749 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.47423 Jy ! Component: 100 - total flux cleaned = 0.588769 Jy ! Total flux subtracted in 100 components = 0.588769 Jy ! Clean residual min=-0.017106 max=0.045930 Jy/beam ! Clean residual mean=0.000002 rms=0.003794 Jy/beam ! Combined flux in latest and established models = 0.588769 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.588769 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.106958Jy sigma=1.897992 ! Fit after self-cal, rms=0.106928Jy sigma=1.897312 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0478329 Jy ! Component: 100 - total flux cleaned = 0.0692531 Jy ! Total flux subtracted in 100 components = 0.0692531 Jy ! Clean residual min=-0.013068 max=0.021476 Jy/beam ! Clean residual mean=0.000001 rms=0.002599 Jy/beam ! Combined flux in latest and established models = 0.658022 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 8 components and 0.658022 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.083238Jy sigma=1.491154 ! Fit after self-cal, rms=0.083104Jy sigma=1.488348 ! Inverting map ! Added new window around map position (1.2, 3.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0182999 Jy ! Component: 100 - total flux cleaned = 0.0292049 Jy ! Total flux subtracted in 100 components = 0.0292049 Jy ! Clean residual min=-0.011964 max=0.018741 Jy/beam ! Clean residual mean=-0.000000 rms=0.002330 Jy/beam ! Combined flux in latest and established models = 0.687227 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 16 components and 0.687227 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078643Jy sigma=1.413199 ! Fit after self-cal, rms=0.078302Jy sigma=1.406869 ! Inverting map ! Added new window around map position (-1.8, -1). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0159398 Jy ! Component: 100 - total flux cleaned = 0.0231305 Jy ! Total flux subtracted in 100 components = 0.0231305 Jy ! Clean residual min=-0.010082 max=0.012961 Jy/beam ! Clean residual mean=-0.000001 rms=0.002073 Jy/beam ! Combined flux in latest and established models = 0.710357 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 23 components and 0.710357 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074979Jy sigma=1.341947 ! Fit after self-cal, rms=0.074779Jy sigma=1.338178 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.894 mas, bmaj=2.095 mas, bpa=-6.404 degrees ! Estimated noise=0.291791 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00928884 Jy ! Component: 100 - total flux cleaned = 0.013633 Jy ! Component: 150 - total flux cleaned = 0.0158965 Jy ! Component: 200 - total flux cleaned = 0.0174794 Jy ! Total flux subtracted in 200 components = 0.0174794 Jy ! Clean residual min=-0.010701 max=0.009429 Jy/beam ! Clean residual mean=-0.000004 rms=0.002306 Jy/beam ! Combined flux in latest and established models = 0.727837 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 39 components and 0.727837 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073113Jy sigma=1.305765 ! Fit after self-cal, rms=0.073080Jy sigma=1.305078 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.894 x 2.095 at -6.404 degrees (North through East) ! Clean map min=-0.010242 max=0.61591 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.03 HN 0.94 KP 1.03 ! LA 1.00 MK 1.02 NL 1.07 OV 0.92 ! PT 0.95 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.02 HN 0.95 KP 1.05 ! LA 1.00 MK 1.02 NL 1.08 OV 0.92 ! PT 0.95 SC 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.03 HN 0.95 KP 1.04 ! LA 0.99 MK 1.02 NL 1.08 OV 0.94 ! PT 0.95 SC 0.96 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.04 HN 0.94 KP 1.04 ! LA 1.00 MK 1.03 NL 1.07 OV 0.93 ! PT 0.95 SC 0.98 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.04 HN 0.94 KP 1.04 ! LA 1.01 MK 1.01 NL 1.08 OV 0.92 ! PT 0.95 SC 1.00 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.04 HN 0.94 KP 1.03 ! LA 1.00 MK 1.03 NL 1.08 OV 0.93 ! PT 0.95 SC 1.00 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.03 HN 0.96 KP 1.02 ! LA 1.01 MK 1.02 NL 1.07 OV 0.93 ! PT 0.95 SC 1.00 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.04 HN 0.96 KP 1.04 ! LA 1.01 MK 1.03 NL 1.08 OV 0.93 ! PT 0.94 SC 0.99 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.03 HN 0.95 KP 1.03 ! LA 1.01 MK 1.03 NL 1.07 OV 0.93 ! PT 0.95 SC 0.99 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.03 HN 0.94 KP 1.06 ! LA 1.01 MK 1.03 NL 1.08 OV 0.92 ! PT 0.96 SC 0.99 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.03 HN 0.96 KP 1.06 ! LA 1.01 MK 1.01 NL 1.08 OV 0.93 ! PT 0.96 SC 1.00 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.02 HN 0.96 KP 0.92 ! LA 1.02 MK 1.02 NL 1.07 OV 0.93 ! PT 0.94 SC 1.00 ! ! ! Fit before self-cal, rms=0.073080Jy sigma=1.305078 ! Fit after self-cal, rms=0.060549Jy sigma=1.068099 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8944 mas, bmaj=2.105 mas, bpa=-6.249 degrees ! Estimated noise=0.293355 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00983034 Jy ! Component: 100 - total flux cleaned = -0.0119851 Jy ! Component: 150 - total flux cleaned = -0.0129614 Jy ! Component: 200 - total flux cleaned = -0.0136982 Jy ! Total flux subtracted in 200 components = -0.0136982 Jy ! Clean residual min=-0.003780 max=0.004983 Jy/beam ! Clean residual mean=0.000000 rms=0.000911 Jy/beam ! Combined flux in latest and established models = 0.714139 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 49 components and 0.714139 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058856Jy sigma=1.034278 ! Fit after self-cal, rms=0.058824Jy sigma=1.033524 ! Inverting map ! Added new window around map position (5.4, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00457691 Jy ! Component: 100 - total flux cleaned = 0.00577394 Jy ! Component: 150 - total flux cleaned = 0.00632274 Jy ! Component: 200 - total flux cleaned = 0.00692531 Jy ! Total flux subtracted in 200 components = 0.00692531 Jy ! Clean residual min=-0.003500 max=0.004352 Jy/beam ! Clean residual mean=0.000001 rms=0.000805 Jy/beam ! Combined flux in latest and established models = 0.721064 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 72 components and 0.721064 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058254Jy sigma=1.023040 ! Fit after self-cal, rms=0.058212Jy sigma=1.022327 ! Inverting map ! Added new window around map position (1.8, -0.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00435974 Jy ! Component: 100 - total flux cleaned = 0.00577607 Jy ! Component: 150 - total flux cleaned = 0.00628603 Jy ! Component: 200 - total flux cleaned = 0.00666107 Jy ! Total flux subtracted in 200 components = 0.00666107 Jy ! Clean residual min=-0.002925 max=0.002866 Jy/beam ! Clean residual mean=0.000001 rms=0.000721 Jy/beam ! Combined flux in latest and established models = 0.727725 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 91 components and 0.727725 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057768Jy sigma=1.013853 ! Fit after self-cal, rms=0.057739Jy sigma=1.013414 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057739Jy sigma=1.013414 ! Fit after self-cal, rms=0.056850Jy sigma=0.997122 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8941 mas, bmaj=2.104 mas, bpa=-6.284 degrees ! Estimated noise=0.293729 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00298195 Jy ! Component: 100 - total flux cleaned = -0.0031881 Jy ! Component: 150 - total flux cleaned = -0.0031109 Jy ! Component: 200 - total flux cleaned = -0.00289358 Jy ! Total flux subtracted in 200 components = -0.00289358 Jy ! Clean residual min=-0.002281 max=0.002386 Jy/beam ! Clean residual mean=0.000001 rms=0.000560 Jy/beam ! Combined flux in latest and established models = 0.724831 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 102 components and 0.724831 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056533Jy sigma=0.990828 ! Fit after self-cal, rms=0.056514Jy sigma=0.990476 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000163775 Jy ! Component: 100 - total flux cleaned = 0.000326754 Jy ! Component: 150 - total flux cleaned = 0.000766486 Jy ! Component: 200 - total flux cleaned = 0.00112504 Jy ! Total flux subtracted in 200 components = 0.00112504 Jy ! Clean residual min=-0.002091 max=0.002315 Jy/beam ! Clean residual mean=0.000002 rms=0.000540 Jy/beam ! Combined flux in latest and established models = 0.725956 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 109 components and 0.725956 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056405Jy sigma=0.988427 ! Fit after self-cal, rms=0.056399Jy sigma=0.988315 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056399Jy sigma=0.988315 ! Fit after self-cal, rms=0.056210Jy sigma=0.985988 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8934 mas, bmaj=2.104 mas, bpa=-6.267 degrees ! Estimated noise=0.293568 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00226699 Jy ! Component: 100 - total flux cleaned = -0.00294563 Jy ! Component: 150 - total flux cleaned = -0.0028394 Jy ! Component: 200 - total flux cleaned = -0.00259925 Jy ! Total flux subtracted in 200 components = -0.00259925 Jy ! Clean residual min=-0.001953 max=0.002096 Jy/beam ! Clean residual mean=0.000002 rms=0.000479 Jy/beam ! Combined flux in latest and established models = 0.723357 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 112 components and 0.723357 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056071Jy sigma=0.983251 ! Fit after self-cal, rms=0.056067Jy sigma=0.983153 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-7, 1.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00151869 Jy ! Component: 100 - total flux cleaned = 0.00202307 Jy ! Component: 150 - total flux cleaned = 0.00233255 Jy ! Component: 200 - total flux cleaned = 0.00245547 Jy ! Total flux subtracted in 200 components = 0.00245547 Jy ! Clean residual min=-0.001708 max=0.001956 Jy/beam ! Clean residual mean=0.000002 rms=0.000456 Jy/beam ! Combined flux in latest and established models = 0.725813 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 126 components and 0.725813 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055976Jy sigma=0.981512 ! Fit after self-cal, rms=0.055973Jy sigma=0.981458 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055973Jy sigma=0.981458 ! Fit after self-cal, rms=0.055879Jy sigma=0.980717 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.073 mas, bmaj=3.02 mas, bpa=-0.3524 degrees ! Estimated noise=0.376664 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000937234 Jy ! Component: 100 - total flux cleaned = -0.000943662 Jy ! Component: 150 - total flux cleaned = -0.000721606 Jy ! Component: 200 - total flux cleaned = -0.000497444 Jy ! Total flux subtracted in 200 components = -0.000497444 Jy ! Clean residual min=-0.002127 max=0.002203 Jy/beam ! Clean residual mean=0.000004 rms=0.000597 Jy/beam ! Combined flux in latest and established models = 0.725315 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 144 components and 0.725315 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055845Jy sigma=0.980064 ! Fit after self-cal, rms=0.055843Jy sigma=0.980022 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.1187e-05 Jy ! Component: 100 - total flux cleaned = 0.00024515 Jy ! Component: 150 - total flux cleaned = 0.00036254 Jy ! Component: 200 - total flux cleaned = 0.000426476 Jy ! Total flux subtracted in 200 components = 0.000426476 Jy ! Clean residual min=-0.002109 max=0.002240 Jy/beam ! Clean residual mean=0.000004 rms=0.000589 Jy/beam ! Combined flux in latest and established models = 0.725742 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 153 components and 0.725742 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055831Jy sigma=0.979839 ! Fit after self-cal, rms=0.055830Jy sigma=0.979831 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8929 mas, bmaj=2.104 mas, bpa=-6.253 degrees ! Estimated noise=0.293436 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8929 x 2.104 at -6.253 degrees (North through East) ! Clean map min=-0.0016285 max=0.61964 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055830Jy sigma=0.979831 ! Fit after self-cal, rms=0.051573Jy sigma=0.898572 ! Inverting map and beam ! Estimated beam: bmin=0.893 mas, bmaj=2.103 mas, bpa=-6.24 degrees ! Estimated noise=0.293474 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000958198 Jy ! Component: 100 - total flux cleaned = -0.00123633 Jy ! Component: 150 - total flux cleaned = -0.00139775 Jy ! Component: 200 - total flux cleaned = -0.00136178 Jy ! Total flux subtracted in 200 components = -0.00136178 Jy ! Clean residual min=-0.001582 max=0.001754 Jy/beam ! Clean residual mean=0.000002 rms=0.000387 Jy/beam ! Combined flux in latest and established models = 0.72438 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 168 components and 0.72438 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051502Jy sigma=0.897237 ! Fit after self-cal, rms=0.051500Jy sigma=0.897200 ! Inverting map ! Added new window around map position (-5, 22.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00126522 Jy ! Component: 100 - total flux cleaned = 0.00109998 Jy ! Component: 150 - total flux cleaned = 0.00109948 Jy ! Component: 200 - total flux cleaned = 0.00123448 Jy ! Total flux subtracted in 200 components = 0.00123448 Jy ! Clean residual min=-0.001469 max=0.001584 Jy/beam ! Clean residual mean=0.000002 rms=0.000366 Jy/beam ! Combined flux in latest and established models = 0.725615 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 181 components and 0.725614 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051426Jy sigma=0.895774 ! Fit after self-cal, rms=0.051424Jy sigma=0.895723 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051424Jy sigma=0.895723 ! Fit after self-cal, rms=0.051385Jy sigma=0.895477 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6973 mas, bmaj=1.85 mas, bpa=-7.149 degrees ! Estimated noise=0.454527 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.474954 Jy ! Component: 100 - total flux cleaned = 0.589082 Jy ! Component: 150 - total flux cleaned = 0.63671 Jy ! Component: 200 - total flux cleaned = 0.657949 Jy ! Total flux subtracted in 200 components = 0.657949 Jy ! Clean residual min=-0.004110 max=0.009200 Jy/beam ! Clean residual mean=0.000001 rms=0.000987 Jy/beam ! Combined flux in latest and established models = 0.657949 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.657949 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8926 mas, bmaj=2.103 mas, bpa=-6.233 degrees ! Estimated noise=0.293386 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0122864 Jy ! Component: 100 - total flux cleaned = 0.0198208 Jy ! Component: 150 - total flux cleaned = 0.0253053 Jy ! Component: 200 - total flux cleaned = 0.0297193 Jy ! Total flux subtracted in 200 components = 0.0297193 Jy ! Clean residual min=-0.003021 max=0.003247 Jy/beam ! Clean residual mean=0.000002 rms=0.000706 Jy/beam ! Combined flux in latest and established models = 0.687669 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 42 components and 0.687668 Jy ! Inverting map ! Added new window around map position (-1, 2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00371592 Jy ! Component: 100 - total flux cleaned = 0.00678682 Jy ! Component: 150 - total flux cleaned = 0.00951624 Jy ! Component: 200 - total flux cleaned = 0.0119586 Jy ! Total flux subtracted in 200 components = 0.0119586 Jy ! Clean residual min=-0.002449 max=0.002517 Jy/beam ! Clean residual mean=0.000002 rms=0.000555 Jy/beam ! Combined flux in latest and established models = 0.699627 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 71 components and 0.699627 Jy ! Inverting map ! Added new window around map position (-1.4, -3.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00242462 Jy ! Component: 100 - total flux cleaned = 0.00445204 Jy ! Component: 150 - total flux cleaned = 0.00639677 Jy ! Component: 200 - total flux cleaned = 0.00789811 Jy ! Total flux subtracted in 200 components = 0.00789811 Jy ! Clean residual min=-0.002055 max=0.001840 Jy/beam ! Clean residual mean=0.000002 rms=0.000474 Jy/beam ! Combined flux in latest and established models = 0.707525 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 90 components and 0.707525 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.074 mas, bmaj=3.02 mas, bpa=-0.3459 degrees ! Estimated noise=0.376698 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00265954 Jy ! Component: 100 - total flux cleaned = 0.00480279 Jy ! Component: 150 - total flux cleaned = 0.00663636 Jy ! Component: 200 - total flux cleaned = 0.00825001 Jy ! Total flux subtracted in 200 components = 0.00825001 Jy ! Clean residual min=-0.002029 max=0.002182 Jy/beam ! Clean residual mean=0.000004 rms=0.000604 Jy/beam ! Combined flux in latest and established models = 0.715775 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00142885 Jy ! Component: 100 - total flux cleaned = 0.00260371 Jy ! Component: 150 - total flux cleaned = 0.0036176 Jy ! Component: 200 - total flux cleaned = 0.00450014 Jy ! Total flux subtracted in 200 components = 0.00450014 Jy ! Clean residual min=-0.001883 max=0.001957 Jy/beam ! Clean residual mean=0.000005 rms=0.000539 Jy/beam ! Combined flux in latest and established models = 0.720275 Jy ! Adding 77 model components to the UV plane model. ! The established model now contains 156 components and 0.720275 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8926 mas, bmaj=2.103 mas, bpa=-6.233 degrees ! Estimated noise=0.293386 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000668599 Jy ! Component: 100 - total flux cleaned = -0.000358343 Jy ! Component: 150 - total flux cleaned = 0.000214848 Jy ! Component: 200 - total flux cleaned = 0.00070596 Jy ! Total flux subtracted in 200 components = 0.00070596 Jy ! Clean residual min=-0.001582 max=0.001713 Jy/beam ! Clean residual mean=0.000002 rms=0.000373 Jy/beam ! Combined flux in latest and established models = 0.720981 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 174 components and 0.720981 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051364Jy sigma=0.895315 ! Fit after self-cal, rms=0.051348Jy sigma=0.894973 wmodel J2035+1056_X_map.mod ! Writing 174 model components to file: J2035+1056_X_map.mod wobs J2035+1056_X_uvs.fits ! Writing UV FITS file: J2035+1056_X_uvs.fits wwins J2035+1056_X_map.win ! wwins: Wrote 9 windows to J2035+1056_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000106395 Jy ! Component: 100 - total flux cleaned = -2.72955e-05 Jy ! Component: 150 - total flux cleaned = -2.70754e-05 Jy ! Component: 200 - total flux cleaned = -5.17104e-05 Jy ! Component: 250 - total flux cleaned = -0.000123094 Jy ! Component: 300 - total flux cleaned = -0.00012296 Jy ! Component: 350 - total flux cleaned = -0.000190786 Jy ! Component: 400 - total flux cleaned = -0.000212938 Jy ! Component: 450 - total flux cleaned = -0.000256554 Jy ! Component: 500 - total flux cleaned = -0.000298948 Jy ! Component: 550 - total flux cleaned = -0.000320172 Jy ! Component: 600 - total flux cleaned = -0.000340711 Jy ! Component: 650 - total flux cleaned = -0.00038115 Jy ! Component: 700 - total flux cleaned = -0.000360561 Jy ! Component: 750 - total flux cleaned = -0.00040018 Jy ! Component: 800 - total flux cleaned = -0.000419604 Jy ! Component: 850 - total flux cleaned = -0.000457928 Jy ! Component: 900 - total flux cleaned = -0.000514638 Jy ! Component: 950 - total flux cleaned = -0.000569876 Jy ! Component: 1000 - total flux cleaned = -0.000569911 Jy ! Component: 1050 - total flux cleaned = -0.000606076 Jy ! Component: 1100 - total flux cleaned = -0.00065947 Jy ! Component: 1150 - total flux cleaned = -0.000659358 Jy ! Component: 1200 - total flux cleaned = -0.000694075 Jy ! Component: 1250 - total flux cleaned = -0.000677039 Jy ! Component: 1300 - total flux cleaned = -0.000744847 Jy ! Component: 1350 - total flux cleaned = -0.000778456 Jy ! Component: 1400 - total flux cleaned = -0.00081186 Jy ! Component: 1450 - total flux cleaned = -0.00091047 Jy ! Component: 1500 - total flux cleaned = -0.000959097 Jy ! Component: 1550 - total flux cleaned = -0.000894533 Jy ! Component: 1600 - total flux cleaned = -0.000942442 Jy ! Component: 1650 - total flux cleaned = -0.000926497 Jy ! Component: 1700 - total flux cleaned = -0.000973469 Jy ! Component: 1750 - total flux cleaned = -0.000957799 Jy ! Component: 1800 - total flux cleaned = -0.000896309 Jy ! Component: 1850 - total flux cleaned = -0.000865911 Jy ! Component: 1900 - total flux cleaned = -0.000820736 Jy ! Component: 1950 - total flux cleaned = -0.000761233 Jy ! Component: 2000 - total flux cleaned = -0.00074639 Jy ! Component: 2050 - total flux cleaned = -0.000702666 Jy ! Component: 2100 - total flux cleaned = -0.000659251 Jy ! Component: 2150 - total flux cleaned = -0.000702584 Jy ! Component: 2200 - total flux cleaned = -0.000673871 Jy ! Component: 2250 - total flux cleaned = -0.000617097 Jy ! Component: 2300 - total flux cleaned = -0.000589025 Jy ! Component: 2350 - total flux cleaned = -0.000617008 Jy ! Component: 2400 - total flux cleaned = -0.000589317 Jy ! Component: 2450 - total flux cleaned = -0.000548023 Jy ! Component: 2500 - total flux cleaned = -0.000507194 Jy ! Component: 2550 - total flux cleaned = -0.000466567 Jy ! Component: 2600 - total flux cleaned = -0.00043979 Jy ! Component: 2650 - total flux cleaned = -0.000386383 Jy ! Component: 2700 - total flux cleaned = -0.000346628 Jy ! Component: 2750 - total flux cleaned = -0.000320591 Jy ! Component: 2800 - total flux cleaned = -0.000203402 Jy ! Component: 2850 - total flux cleaned = -0.000151684 Jy ! Component: 2900 - total flux cleaned = -0.00011327 Jy ! Component: 2950 - total flux cleaned = -0.000113508 Jy ! Component: 3000 - total flux cleaned = -7.54341e-05 Jy ! Component: 3050 - total flux cleaned = -2.51676e-05 Jy ! Component: 3100 - total flux cleaned = -1.27813e-05 Jy ! Component: 3150 - total flux cleaned = 2.44464e-05 Jy ! Component: 3200 - total flux cleaned = 6.1368e-05 Jy ! Component: 3250 - total flux cleaned = 7.37168e-05 Jy ! Component: 3300 - total flux cleaned = 0.000146683 Jy ! Component: 3350 - total flux cleaned = 0.000207012 Jy ! Component: 3400 - total flux cleaned = 0.000206884 Jy ! Component: 3450 - total flux cleaned = 0.00024267 Jy ! Component: 3500 - total flux cleaned = 0.000301646 Jy ! Component: 3550 - total flux cleaned = 0.00032516 Jy ! Component: 3600 - total flux cleaned = 0.000290119 Jy ! Component: 3650 - total flux cleaned = 0.000359573 Jy ! Component: 3700 - total flux cleaned = 0.000347913 Jy ! Component: 3750 - total flux cleaned = 0.000393829 Jy ! Component: 3800 - total flux cleaned = 0.000439316 Jy ! Component: 3850 - total flux cleaned = 0.000416827 Jy ! Component: 3900 - total flux cleaned = 0.000461804 Jy ! Component: 3950 - total flux cleaned = 0.000528864 Jy ! Component: 4000 - total flux cleaned = 0.000506618 Jy ! Component: 4050 - total flux cleaned = 0.000506603 Jy ! Total flux subtracted in 4096 components = 0.000561424 Jy ! Clean residual min=-0.000550 max=0.000612 Jy/beam ! Clean residual mean=0.000001 rms=0.000194 Jy/beam ! Combined flux in latest and established models = 0.721542 Jy keep ! Adding 318 model components to the UV plane model. ! The established model now contains 491 components and 0.721543 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J2035+1056_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8926 x 2.103 at -6.233 degrees (North through East) ! Clean map min=-0.001319 max=0.62091 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J2035+1056_X_map.fits wmodel /vlbi/uf001/uva//J2035+1056_X_map.mod ! Writing 491 model components to file: /vlbi/uf001/uva//J2035+1056_X_map.mod wobs /vlbi/uf001/uva//J2035+1056_X_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J2035+1056_X_uvs.fits wwins /vlbi/uf001/uva//J2035+1056_X_map.win ! wwins: Wrote 10 windows to /vlbi/uf001/uva//J2035+1056_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.620907 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000193865 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0936688 0.0936688 0.187338 0.374675 0.74935 1.4987 2.9974 5.9948 11.9896 23.9792 47.9584 95.9169 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.62 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 3202.77 quit ! Quitting program ! Log file /vlbi/uf001/uva//J2035+1056_X_dfm.log closed on Mon Jan 14 05:33:17 2019