! Started logfile: /vlbi/uf001/uva//J2030-2506_S_a_dfm.log on Mon Jan 14 05:31:33 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J2030-2506_S_a_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J2030-2506_S_a_uva.fits
! AN table 1: 58 integrations on 28 of 28 possible baselines.
! AN table 2: 29 integrations on 1 of 1 possible baselines.
! Apparent sampling: 0.877193 visibilities/baseline/integration-bin.
! Found source: J2030-2506
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 4350 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J2030-2506_S_a]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 44 telescope corrections were flagged in sub-array 1.
!  A total of 58 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 44 telescope corrections were flagged in sub-array 1.
!  A total of 58 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 44 telescope corrections were flagged in sub-array 1.
!  A total of 58 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.003063Jy  sigma=16.369244
! Fit after  self-cal, rms=0.950859Jy  sigma=15.488833
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.089 mas, bmaj=15.67 mas, bpa=-31.93 degrees
! Estimated noise=1.03382 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0395968 Jy
! Component: 100  -  total flux cleaned = 0.0490837 Jy
! Total flux subtracted in 100 components = 0.0490837 Jy
! Clean residual min=-0.004593 max=0.004219 Jy/beam
! Clean residual mean=-0.000034 rms=0.001258 Jy/beam
! Combined flux in latest and established models = 0.0490837 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.0490837 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.073006Jy  sigma=1.170114
! Fit after  self-cal, rms=0.071891Jy  sigma=1.150071
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.106 mas, bmaj=16.33 mas, bpa=-29.85 degrees
! Estimated noise=0.682999 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0061284 Jy
! Component: 100  -  total flux cleaned = 0.00940641 Jy
! Component: 150  -  total flux cleaned = 0.0114032 Jy
! Component: 200  -  total flux cleaned = 0.0127414 Jy
! Total flux subtracted in 200 components = 0.0127414 Jy
! Clean residual min=-0.003554 max=0.003080 Jy/beam
! Clean residual mean=-0.000005 rms=0.000903 Jy/beam
! Combined flux in latest and established models = 0.0618251 Jy
! Performing phase self-cal
! Adding 54 model components to the UV plane model.
! The established model now contains 66 components and 0.0618251 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.071415Jy  sigma=1.140765
! Fit after  self-cal, rms=0.071382Jy  sigma=1.140113
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.106 x 16.33 at -29.85 degrees (North through East)
! Clean map  min=-0.003476  max=0.051478 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.14     FD        0.88     KP        0.97     LA        0.94     
!   MK        0.98     NL        1.09     OV        0.96     PT        1.05     
! 
!  Telescope amplitude corrections in sub-array 2:
!   HN        0.00*    SC        0.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        0.90     KP        1.05     LA        0.91     
!   MK        1.02     NL        1.06     OV        0.97     PT        1.16     
! 
!  Telescope amplitude corrections in sub-array 2:
!   HN        0.00*    SC        0.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.86     KP        1.04     LA        1.11     
!   MK        1.02     NL        1.01     OV        0.93     PT        1.05     
! 
!  Telescope amplitude corrections in sub-array 2:
!   HN        0.00*    SC        0.00*    
! 
! 
! Fit before self-cal, rms=0.071382Jy  sigma=1.140113
! Fit after  self-cal, rms=0.071778Jy  sigma=1.135889
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.151 mas, bmaj=16.31 mas, bpa=-29.81 degrees
! Estimated noise=0.675681 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00149782 Jy
! Component: 100  -  total flux cleaned = 0.00169312 Jy
! Component: 150  -  total flux cleaned = 0.001811 Jy
! Component: 200  -  total flux cleaned = 0.00193563 Jy
! Total flux subtracted in 200 components = 0.00193563 Jy
! Clean residual min=-0.002990 max=0.002605 Jy/beam
! Clean residual mean=-0.000011 rms=0.000760 Jy/beam
! Combined flux in latest and established models = 0.0637607 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 78 components and 0.0637607 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.071743Jy  sigma=1.135320
! Fit after  self-cal, rms=0.071953Jy  sigma=1.134012
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.071953Jy  sigma=1.134012
! Fit after  self-cal, rms=0.072626Jy  sigma=1.132043
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.135 mas, bmaj=16.33 mas, bpa=-29.92 degrees
! Estimated noise=0.675642 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000672941 Jy
! Component: 100  -  total flux cleaned = 0.000818614 Jy
! Component: 150  -  total flux cleaned = 0.000958836 Jy
! Component: 200  -  total flux cleaned = 0.00105909 Jy
! Total flux subtracted in 200 components = 0.00105909 Jy
! Clean residual min=-0.002759 max=0.002435 Jy/beam
! Clean residual mean=-0.000007 rms=0.000694 Jy/beam
! Combined flux in latest and established models = 0.0648198 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 92 components and 0.0648198 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.072606Jy  sigma=1.131842
! Fit after  self-cal, rms=0.072684Jy  sigma=1.131590
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000233702 Jy
! Component: 100  -  total flux cleaned = 0.000284745 Jy
! Component: 150  -  total flux cleaned = 0.000313678 Jy
! Component: 200  -  total flux cleaned = 0.000339396 Jy
! Total flux subtracted in 200 components = 0.000339396 Jy
! Clean residual min=-0.002738 max=0.002340 Jy/beam
! Clean residual mean=-0.000007 rms=0.000690 Jy/beam
! Combined flux in latest and established models = 0.0651592 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 104 components and 0.0651592 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.072674Jy  sigma=1.131527
! Fit after  self-cal, rms=0.072664Jy  sigma=1.131492
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.072664Jy  sigma=1.131492
! Fit after  self-cal, rms=0.072543Jy  sigma=1.131248
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.116 mas, bmaj=16.29 mas, bpa=-29.92 degrees
! Estimated noise=0.67093 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000281248 Jy
! Component: 100  -  total flux cleaned = 0.000408297 Jy
! Component: 150  -  total flux cleaned = 0.000485103 Jy
! Component: 200  -  total flux cleaned = 0.000526037 Jy
! Total flux subtracted in 200 components = 0.000526037 Jy
! Clean residual min=-0.002643 max=0.002450 Jy/beam
! Clean residual mean=-0.000006 rms=0.000674 Jy/beam
! Combined flux in latest and established models = 0.0656853 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 119 components and 0.0656853 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.072532Jy  sigma=1.131163
! Fit after  self-cal, rms=0.072544Jy  sigma=1.131092
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.46276e-05 Jy
! Component: 100  -  total flux cleaned = 0.000109529 Jy
! Component: 150  -  total flux cleaned = 0.000145737 Jy
! Component: 200  -  total flux cleaned = 0.000178216 Jy
! Total flux subtracted in 200 components = 0.000178216 Jy
! Clean residual min=-0.002601 max=0.002453 Jy/beam
! Clean residual mean=-0.000006 rms=0.000669 Jy/beam
! Combined flux in latest and established models = 0.0658635 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 124 components and 0.0658635 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.072537Jy  sigma=1.131060
! Fit after  self-cal, rms=0.072537Jy  sigma=1.131041
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.072537Jy  sigma=1.131041
! Fit after  self-cal, rms=0.072204Jy  sigma=1.131000
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.959 mas, bmaj=21.74 mas, bpa=-7.592 degrees
! Estimated noise=0.723315 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000190342 Jy
! Component: 100  -  total flux cleaned = 0.000297106 Jy
! Component: 150  -  total flux cleaned = 0.000386779 Jy
! Component: 200  -  total flux cleaned = 0.000452479 Jy
! Total flux subtracted in 200 components = 0.000452479 Jy
! Clean residual min=-0.003005 max=0.002555 Jy/beam
! Clean residual mean=-0.000009 rms=0.000736 Jy/beam
! Combined flux in latest and established models = 0.066316 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 144 components and 0.066316 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.072198Jy  sigma=1.130979
! Fit after  self-cal, rms=0.072203Jy  sigma=1.130955
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.69273e-05 Jy
! Component: 100  -  total flux cleaned = 7.53045e-05 Jy
! Component: 150  -  total flux cleaned = 0.000147314 Jy
! Component: 200  -  total flux cleaned = 0.000201139 Jy
! Total flux subtracted in 200 components = 0.000201139 Jy
! Clean residual min=-0.002994 max=0.002580 Jy/beam
! Clean residual mean=-0.000008 rms=0.000735 Jy/beam
! Combined flux in latest and established models = 0.0665171 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 148 components and 0.0665171 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.072198Jy  sigma=1.130958
! Fit after  self-cal, rms=0.072202Jy  sigma=1.130940
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=5.104 mas, bmaj=16.25 mas, bpa=-29.9 degrees
! Estimated noise=0.667332 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.104 x 16.25 at -29.9 degrees (North through East)
! Clean map  min=-0.0025484  max=0.049924 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.062 mas, bmaj=15.73 mas, bpa=-31.99 degrees
! Estimated noise=1.01238 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.03982 Jy
! Component: 100  -  total flux cleaned = 0.0508027 Jy
! Component: 150  -  total flux cleaned = 0.0566584 Jy
! Component: 200  -  total flux cleaned = 0.060109 Jy
! Total flux subtracted in 200 components = 0.060109 Jy
! Clean residual min=-0.003532 max=0.003495 Jy/beam
! Clean residual mean=-0.000015 rms=0.000913 Jy/beam
! Combined flux in latest and established models = 0.060109 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 31 model components to the UV plane model.
! The established model now contains 31 components and 0.060109 Jy
! Inverting map and beam 
! Estimated beam: bmin=5.104 mas, bmaj=16.25 mas, bpa=-29.9 degrees
! Estimated noise=0.667332 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00243744 Jy
! Component: 100  -  total flux cleaned = 0.0039803 Jy
! Component: 150  -  total flux cleaned = 0.00500129 Jy
! Component: 200  -  total flux cleaned = 0.00568728 Jy
! Total flux subtracted in 200 components = 0.00568728 Jy
! Clean residual min=-0.002837 max=0.002500 Jy/beam
! Clean residual mean=-0.000007 rms=0.000678 Jy/beam
! Combined flux in latest and established models = 0.0657963 Jy
! Adding 19 model components to the UV plane model.
! The established model now contains 48 components and 0.0657963 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.959 mas, bmaj=21.74 mas, bpa=-7.592 degrees
! Estimated noise=0.723315 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000548225 Jy
! Component: 100  -  total flux cleaned = 0.000693915 Jy
! Component: 150  -  total flux cleaned = 0.00076151 Jy
! Component: 200  -  total flux cleaned = 0.00082279 Jy
! Total flux subtracted in 200 components = 0.00082279 Jy
! Clean residual min=-0.003122 max=0.002597 Jy/beam
! Clean residual mean=-0.000009 rms=0.000741 Jy/beam
! Combined flux in latest and established models = 0.066619 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.77401e-05 Jy
! Component: 100  -  total flux cleaned = 8.23778e-05 Jy
! Component: 150  -  total flux cleaned = 0.000107736 Jy
! Component: 200  -  total flux cleaned = 0.000132023 Jy
! Total flux subtracted in 200 components = 0.000132023 Jy
! Clean residual min=-0.003097 max=0.002594 Jy/beam
! Clean residual mean=-0.000008 rms=0.000740 Jy/beam
! Combined flux in latest and established models = 0.0667511 Jy
! Adding 26 model components to the UV plane model.
! The established model now contains 67 components and 0.0667511 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=5.104 mas, bmaj=16.25 mas, bpa=-29.9 degrees
! Estimated noise=0.667332 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.12355e-05 Jy
! Component: 100  -  total flux cleaned = 3.16364e-05 Jy
! Component: 150  -  total flux cleaned = 3.19689e-05 Jy
! Component: 200  -  total flux cleaned = 3.20058e-05 Jy
! Total flux subtracted in 200 components = 3.20058e-05 Jy
! Clean residual min=-0.002709 max=0.002486 Jy/beam
! Clean residual mean=-0.000006 rms=0.000669 Jy/beam
! Combined flux in latest and established models = 0.0667831 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 84 components and 0.0667831 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.072201Jy  sigma=1.131014
! Fit after  self-cal, rms=0.072198Jy  sigma=1.130951
wmodel J2030-2506_S_a_map.mod
! Writing 84 model components to file: J2030-2506_S_a_map.mod
wobs   J2030-2506_S_a_uvs.fits
! Writing UV FITS file: J2030-2506_S_a_uvs.fits
wwins  J2030-2506_S_a_map.win
! wwins: Wrote 1 windows to J2030-2506_S_a_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000465402 Jy
! Component: 100  -  total flux cleaned = -0.000542475 Jy
! Component: 150  -  total flux cleaned = -0.000581071 Jy
! Component: 200  -  total flux cleaned = -0.000717701 Jy
! Component: 250  -  total flux cleaned = -0.000813895 Jy
! Component: 300  -  total flux cleaned = -0.000935381 Jy
! Component: 350  -  total flux cleaned = -0.00122957 Jy
! Component: 400  -  total flux cleaned = -0.00154203 Jy
! Component: 450  -  total flux cleaned = -0.00178948 Jy
! Component: 500  -  total flux cleaned = -0.00200304 Jy
! Component: 550  -  total flux cleaned = -0.002262 Jy
! Component: 600  -  total flux cleaned = -0.00248817 Jy
! Component: 650  -  total flux cleaned = -0.00268413 Jy
! Component: 700  -  total flux cleaned = -0.00287515 Jy
! Component: 750  -  total flux cleaned = -0.00306131 Jy
! Component: 800  -  total flux cleaned = -0.00319744 Jy
! Component: 850  -  total flux cleaned = -0.00337508 Jy
! Component: 900  -  total flux cleaned = -0.00350512 Jy
! Component: 950  -  total flux cleaned = -0.00365321 Jy
! Component: 1000  -  total flux cleaned = -0.00375708 Jy
! Component: 1050  -  total flux cleaned = -0.00381786 Jy
! Component: 1100  -  total flux cleaned = -0.00393767 Jy
! Component: 1150  -  total flux cleaned = -0.00399671 Jy
! Component: 1200  -  total flux cleaned = -0.00407354 Jy
! Component: 1250  -  total flux cleaned = -0.00407349 Jy
! Component: 1300  -  total flux cleaned = -0.00411062 Jy
! Component: 1350  -  total flux cleaned = -0.00414685 Jy
! Component: 1400  -  total flux cleaned = -0.00416503 Jy
! Component: 1450  -  total flux cleaned = -0.00411213 Jy
! Component: 1500  -  total flux cleaned = -0.00418224 Jy
! Component: 1550  -  total flux cleaned = -0.00419924 Jy
! Component: 1600  -  total flux cleaned = -0.00419923 Jy
! Component: 1650  -  total flux cleaned = -0.00416592 Jy
! Component: 1700  -  total flux cleaned = -0.0041332 Jy
! Component: 1750  -  total flux cleaned = -0.00411702 Jy
! Component: 1800  -  total flux cleaned = -0.00406886 Jy
! Component: 1850  -  total flux cleaned = -0.0040214 Jy
! Component: 1900  -  total flux cleaned = -0.00395906 Jy
! Component: 1950  -  total flux cleaned = -0.0039435 Jy
! Component: 2000  -  total flux cleaned = -0.00382157 Jy
! Component: 2050  -  total flux cleaned = -0.00379159 Jy
! Component: 2100  -  total flux cleaned = -0.00373224 Jy
! Component: 2150  -  total flux cleaned = -0.00365876 Jy
! Component: 2200  -  total flux cleaned = -0.0036005 Jy
! Component: 2250  -  total flux cleaned = -0.00351397 Jy
! Component: 2300  -  total flux cleaned = -0.00342869 Jy
! Component: 2350  -  total flux cleaned = -0.00335826 Jy
! Component: 2400  -  total flux cleaned = -0.00326071 Jy
! Component: 2450  -  total flux cleaned = -0.00321935 Jy
! Component: 2500  -  total flux cleaned = -0.00311008 Jy
! Component: 2550  -  total flux cleaned = -0.00304252 Jy
! Component: 2600  -  total flux cleaned = -0.00298905 Jy
! Component: 2650  -  total flux cleaned = -0.00288283 Jy
! Component: 2700  -  total flux cleaned = -0.00280393 Jy
! Component: 2750  -  total flux cleaned = -0.00272573 Jy
! Component: 2800  -  total flux cleaned = -0.0026093 Jy
! Component: 2850  -  total flux cleaned = -0.00248091 Jy
! Component: 2900  -  total flux cleaned = -0.00241718 Jy
! Component: 2950  -  total flux cleaned = -0.00230336 Jy
! Component: 3000  -  total flux cleaned = -0.002178 Jy
! Component: 3050  -  total flux cleaned = -0.00207849 Jy
! Component: 3100  -  total flux cleaned = -0.00199194 Jy
! Component: 3150  -  total flux cleaned = -0.00188164 Jy
! Component: 3200  -  total flux cleaned = -0.00177209 Jy
! Component: 3250  -  total flux cleaned = -0.00163884 Jy
! Component: 3300  -  total flux cleaned = -0.00154253 Jy
! Component: 3350  -  total flux cleaned = -0.00139868 Jy
! Component: 3400  -  total flux cleaned = -0.0013033 Jy
! Component: 3450  -  total flux cleaned = -0.00114894 Jy
! Component: 3500  -  total flux cleaned = -0.00103073 Jy
! Component: 3550  -  total flux cleaned = -0.000936583 Jy
! Component: 3600  -  total flux cleaned = -0.000807669 Jy
! Component: 3650  -  total flux cleaned = -0.000702629 Jy
! Component: 3700  -  total flux cleaned = -0.000586342 Jy
! Component: 3750  -  total flux cleaned = -0.000447435 Jy
! Component: 3800  -  total flux cleaned = -0.000332282 Jy
! Component: 3850  -  total flux cleaned = -0.000240504 Jy
! Component: 3900  -  total flux cleaned = -0.000103288 Jy
! Component: 3950  -  total flux cleaned = -2.34938e-05 Jy
! Component: 4000  -  total flux cleaned = 7.86962e-05 Jy
! Component: 4050  -  total flux cleaned = 0.000146602 Jy
! Total flux subtracted in 4096 components = 0.000259511 Jy
! Clean residual min=-0.000682 max=0.000642 Jy/beam
! Clean residual mean=0.000001 rms=0.000214 Jy/beam
! Combined flux in latest and established models = 0.0670426 Jy
keep
! Adding 288 model components to the UV plane model.
! The established model now contains 372 components and 0.0670426 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J2030-2506_S_a_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.104 x 16.25 at -29.9 degrees (North through East)
! Clean map  min=-0.0022248  max=0.047484 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J2030-2506_S_a_map.fits
wmodel /vlbi/uf001/uva//J2030-2506_S_a_map.mod
! Writing 372 model components to file: /vlbi/uf001/uva//J2030-2506_S_a_map.mod
wobs   /vlbi/uf001/uva//J2030-2506_S_a_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J2030-2506_S_a_uvs.fits
wwins  /vlbi/uf001/uva//J2030-2506_S_a_map.win
! wwins: Wrote 2 windows to /vlbi/uf001/uva//J2030-2506_S_a_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.047484 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000209615 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.32433 1.32433 2.64866 5.29733 10.5947 21.1893 42.3786 84.7572
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.047 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  226.529 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J2030-2506_S_a_dfm.log closed on Mon Jan 14 05:31:37 2019