! Started logfile: /vlbi/uf001/uva//J2027-2136_X_a_dfm.log on Mon Jan 14 05:30:26 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uva//J2027-2136_X_a_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J2027-2136_X_a_uva.fits ! AN table 1: 58 integrations on 45 of 45 possible baselines. ! Apparent sampling: 1 visibilities/baseline/integration-bin. ! Found source: J2027-2136 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 31320 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J2027-2136_X_a] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.002746Jy sigma=21.145136 ! Fit after self-cal, rms=0.954820Jy sigma=20.110905 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6343 mas, bmaj=1.631 mas, bpa=-6.42 degrees ! Estimated noise=0.381011 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0336663 Jy ! Component: 100 - total flux cleaned = 0.0445528 Jy ! Total flux subtracted in 100 components = 0.0445528 Jy ! Clean residual min=-0.002720 max=0.004902 Jy/beam ! Clean residual mean=-0.000009 rms=0.000678 Jy/beam ! Combined flux in latest and established models = 0.0445528 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.0445528 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064102Jy sigma=1.271798 ! Fit after self-cal, rms=0.062668Jy sigma=1.239458 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00712193 Jy ! Component: 100 - total flux cleaned = 0.0110001 Jy ! Total flux subtracted in 100 components = 0.0110001 Jy ! Clean residual min=-0.002322 max=0.002930 Jy/beam ! Clean residual mean=-0.000005 rms=0.000574 Jy/beam ! Combined flux in latest and established models = 0.0555528 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 12 components and 0.0555528 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061685Jy sigma=1.215615 ! Fit after self-cal, rms=0.061660Jy sigma=1.215000 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8202 mas, bmaj=2.044 mas, bpa=-5.244 degrees ! Estimated noise=0.195658 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.4, -1.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00347005 Jy ! Component: 100 - total flux cleaned = 0.00560519 Jy ! Component: 150 - total flux cleaned = 0.00701807 Jy ! Component: 200 - total flux cleaned = 0.00797464 Jy ! Total flux subtracted in 200 components = 0.00797464 Jy ! Clean residual min=-0.001767 max=0.002078 Jy/beam ! Clean residual mean=-0.000005 rms=0.000395 Jy/beam ! Combined flux in latest and established models = 0.0635275 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 29 components and 0.0635275 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061456Jy sigma=1.209956 ! Fit after self-cal, rms=0.061428Jy sigma=1.209376 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8202 x 2.044 at -5.244 degrees (North through East) ! Clean map min=-0.0016333 max=0.048172 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.02 HN 0.92 KP 0.95 ! LA 0.96 MK 1.00 NL 1.20 OV 0.96 ! PT 1.00 SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.97 HN 1.00 KP 1.04 ! LA 0.98 MK 1.03 NL 1.08 OV 0.92 ! PT 1.00 SC 0.95 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.01 HN 0.97 KP 0.98 ! LA 0.93 MK 1.02 NL 1.17 OV 0.93 ! PT 0.99 SC 0.98 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.01 HN 0.94 KP 0.97 ! LA 0.96 MK 1.04 NL 1.17 OV 0.86 ! PT 0.96 SC 1.03 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.08 HN 0.99 KP 1.03 ! LA 0.93 MK 0.99 NL 1.14 OV 0.88 ! PT 0.98 SC 0.94 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 0.98 HN 0.93 KP 1.01 ! LA 0.98 MK 1.02 NL 1.19 OV 0.85 ! PT 1.02 SC 1.06 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.99 HN 0.93 KP 1.02 ! LA 0.98 MK 1.01 NL 1.13 OV 0.85 ! PT 0.99 SC 1.08 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.02 HN 0.92 KP 1.04 ! LA 0.94 MK 0.99 NL 1.10 OV 0.91 ! PT 1.01 SC 1.05 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.02 HN 0.93 KP 1.02 ! LA 0.90 MK 1.02 NL 1.14 OV 0.90 ! PT 0.95 SC 1.08 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 0.95 HN 0.96 KP 1.08 ! LA 0.96 MK 1.09 NL 1.16 OV 0.85 ! PT 0.99 SC 0.95 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.01 HN 0.87 KP 1.05 ! LA 0.91 MK 0.99 NL 1.09 OV 0.94 ! PT 0.99 SC 0.93 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00 HN 1.04 KP 1.02 ! LA 0.92 MK 0.94 NL 1.18 OV 0.87 ! PT 0.98 SC 0.88 ! ! ! Fit before self-cal, rms=0.061428Jy sigma=1.209376 ! Fit after self-cal, rms=0.060609Jy sigma=1.204105 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8199 mas, bmaj=2.056 mas, bpa=-4.956 degrees ! Estimated noise=0.194622 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000286126 Jy ! Component: 100 - total flux cleaned = -0.000285624 Jy ! Component: 150 - total flux cleaned = -0.000306606 Jy ! Component: 200 - total flux cleaned = -0.000326421 Jy ! Total flux subtracted in 200 components = -0.000326421 Jy ! Clean residual min=-0.001206 max=0.001009 Jy/beam ! Clean residual mean=-0.000001 rms=0.000241 Jy/beam ! Combined flux in latest and established models = 0.0632011 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 42 components and 0.0632011 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060590Jy sigma=1.203779 ! Fit after self-cal, rms=0.060666Jy sigma=1.203308 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060666Jy sigma=1.203308 ! Fit after self-cal, rms=0.060846Jy sigma=1.202395 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8197 mas, bmaj=2.05 mas, bpa=-4.722 degrees ! Estimated noise=0.194769 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.50919e-05 Jy ! Component: 100 - total flux cleaned = -0.000133459 Jy ! Component: 150 - total flux cleaned = -0.000116047 Jy ! Component: 200 - total flux cleaned = -0.000116416 Jy ! Total flux subtracted in 200 components = -0.000116416 Jy ! Clean residual min=-0.001128 max=0.000968 Jy/beam ! Clean residual mean=-0.000001 rms=0.000229 Jy/beam ! Combined flux in latest and established models = 0.0630846 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 50 components and 0.0630846 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060834Jy sigma=1.202192 ! Fit after self-cal, rms=0.060848Jy sigma=1.202129 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.60928e-05 Jy ! Component: 100 - total flux cleaned = -7.61014e-05 Jy ! Component: 150 - total flux cleaned = -7.54741e-05 Jy ! Component: 200 - total flux cleaned = -7.54247e-05 Jy ! Total flux subtracted in 200 components = -7.54247e-05 Jy ! Clean residual min=-0.001130 max=0.000931 Jy/beam ! Clean residual mean=-0.000001 rms=0.000228 Jy/beam ! Combined flux in latest and established models = 0.0630092 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 54 components and 0.0630092 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060841Jy sigma=1.201990 ! Fit after self-cal, rms=0.060838Jy sigma=1.201983 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060838Jy sigma=1.201983 ! Fit after self-cal, rms=0.060751Jy sigma=1.201897 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8177 mas, bmaj=2.043 mas, bpa=-4.51 degrees ! Estimated noise=0.194258 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.71477e-05 Jy ! Component: 100 - total flux cleaned = -7.77264e-05 Jy ! Component: 150 - total flux cleaned = -7.80517e-05 Jy ! Component: 200 - total flux cleaned = -6.47731e-05 Jy ! Total flux subtracted in 200 components = -6.47731e-05 Jy ! Clean residual min=-0.001090 max=0.000908 Jy/beam ! Clean residual mean=-0.000001 rms=0.000224 Jy/beam ! Combined flux in latest and established models = 0.0629445 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 57 components and 0.0629445 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060744Jy sigma=1.201767 ! Fit after self-cal, rms=0.060747Jy sigma=1.201747 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.59794e-05 Jy ! Component: 100 - total flux cleaned = -4.63493e-05 Jy ! Component: 150 - total flux cleaned = -5.9238e-05 Jy ! Component: 200 - total flux cleaned = -4.72086e-05 Jy ! Total flux subtracted in 200 components = -4.72086e-05 Jy ! Clean residual min=-0.001085 max=0.000887 Jy/beam ! Clean residual mean=-0.000001 rms=0.000223 Jy/beam ! Combined flux in latest and established models = 0.0628973 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 59 components and 0.0628973 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060741Jy sigma=1.201649 ! Fit after self-cal, rms=0.060739Jy sigma=1.201645 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060739Jy sigma=1.201645 ! Fit after self-cal, rms=0.060541Jy sigma=1.201628 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.193 mas, bmaj=4.704 mas, bpa=-0.1643 degrees ! Estimated noise=0.25085 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000120391 Jy ! Component: 100 - total flux cleaned = 0.000195917 Jy ! Component: 150 - total flux cleaned = 0.000235225 Jy ! Component: 200 - total flux cleaned = 0.000260787 Jy ! Total flux subtracted in 200 components = 0.000260787 Jy ! Clean residual min=-0.001086 max=0.000932 Jy/beam ! Clean residual mean=-0.000001 rms=0.000260 Jy/beam ! Combined flux in latest and established models = 0.0631581 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 67 components and 0.0631581 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060541Jy sigma=1.201620 ! Fit after self-cal, rms=0.060540Jy sigma=1.201601 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.52082e-06 Jy ! Component: 100 - total flux cleaned = 6.39951e-06 Jy ! Component: 150 - total flux cleaned = 1.21726e-05 Jy ! Component: 200 - total flux cleaned = 1.2114e-05 Jy ! Total flux subtracted in 200 components = 1.2114e-05 Jy ! Clean residual min=-0.001075 max=0.000928 Jy/beam ! Clean residual mean=-0.000001 rms=0.000259 Jy/beam ! Combined flux in latest and established models = 0.0631702 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 71 components and 0.0631702 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060539Jy sigma=1.201604 ! Fit after self-cal, rms=0.060538Jy sigma=1.201598 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8156 mas, bmaj=2.037 mas, bpa=-4.328 degrees ! Estimated noise=0.193683 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8156 x 2.037 at -4.328 degrees (North through East) ! Clean map min=-0.0011427 max=0.04758 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6308 mas, bmaj=1.62 mas, bpa=-5.374 degrees ! Estimated noise=0.375699 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.034394 Jy ! Component: 100 - total flux cleaned = 0.0472287 Jy ! Component: 150 - total flux cleaned = 0.0539534 Jy ! Component: 200 - total flux cleaned = 0.0577234 Jy ! Total flux subtracted in 200 components = 0.0577234 Jy ! Clean residual min=-0.002306 max=0.002066 Jy/beam ! Clean residual mean=-0.000002 rms=0.000488 Jy/beam ! Combined flux in latest and established models = 0.0577234 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.0577234 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8156 mas, bmaj=2.037 mas, bpa=-4.328 degrees ! Estimated noise=0.193683 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00223305 Jy ! Component: 100 - total flux cleaned = 0.00358486 Jy ! Component: 150 - total flux cleaned = 0.00440999 Jy ! Component: 200 - total flux cleaned = 0.00458704 Jy ! Total flux subtracted in 200 components = 0.00458704 Jy ! Clean residual min=-0.001137 max=0.000957 Jy/beam ! Clean residual mean=-0.000001 rms=0.000235 Jy/beam ! Combined flux in latest and established models = 0.0623104 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 25 components and 0.0623104 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.193 mas, bmaj=4.704 mas, bpa=-0.1643 degrees ! Estimated noise=0.25085 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000557356 Jy ! Component: 100 - total flux cleaned = 0.000681898 Jy ! Component: 150 - total flux cleaned = 0.000770078 Jy ! Component: 200 - total flux cleaned = 0.000808308 Jy ! Total flux subtracted in 200 components = 0.000808308 Jy ! Clean residual min=-0.001100 max=0.000938 Jy/beam ! Clean residual mean=-0.000001 rms=0.000261 Jy/beam ! Combined flux in latest and established models = 0.0631187 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.58985e-05 Jy ! Component: 100 - total flux cleaned = 3.06534e-05 Jy ! Component: 150 - total flux cleaned = 5.16478e-05 Jy ! Component: 200 - total flux cleaned = 7.15333e-05 Jy ! Total flux subtracted in 200 components = 7.15333e-05 Jy ! Clean residual min=-0.001086 max=0.000938 Jy/beam ! Clean residual mean=-0.000001 rms=0.000259 Jy/beam ! Combined flux in latest and established models = 0.0631902 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 39 components and 0.0631903 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8156 mas, bmaj=2.037 mas, bpa=-4.328 degrees ! Estimated noise=0.193683 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.57592e-05 Jy ! Component: 100 - total flux cleaned = -3.56412e-05 Jy ! Component: 150 - total flux cleaned = -8.93504e-05 Jy ! Component: 200 - total flux cleaned = -0.000121713 Jy ! Total flux subtracted in 200 components = -0.000121713 Jy ! Clean residual min=-0.001055 max=0.000887 Jy/beam ! Clean residual mean=-0.000000 rms=0.000222 Jy/beam ! Combined flux in latest and established models = 0.0630685 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 50 components and 0.0630685 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060540Jy sigma=1.201645 ! Fit after self-cal, rms=0.060540Jy sigma=1.201611 wmodel J2027-2136_X_a_map.mod ! Writing 50 model components to file: J2027-2136_X_a_map.mod wobs J2027-2136_X_a_uvs.fits ! Writing UV FITS file: J2027-2136_X_a_uvs.fits wwins J2027-2136_X_a_map.win ! wwins: Wrote 2 windows to J2027-2136_X_a_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000243797 Jy ! Component: 100 - total flux cleaned = -0.00026001 Jy ! Component: 150 - total flux cleaned = -0.000321282 Jy ! Component: 200 - total flux cleaned = -0.000291609 Jy ! Component: 250 - total flux cleaned = -0.00027732 Jy ! Component: 300 - total flux cleaned = -0.000291593 Jy ! Component: 350 - total flux cleaned = -0.000305244 Jy ! Component: 400 - total flux cleaned = -0.000318557 Jy ! Component: 450 - total flux cleaned = -0.0003445 Jy ! Component: 500 - total flux cleaned = -0.000305793 Jy ! Component: 550 - total flux cleaned = -0.000280585 Jy ! Component: 600 - total flux cleaned = -0.000255787 Jy ! Component: 650 - total flux cleaned = -0.000268283 Jy ! Component: 700 - total flux cleaned = -0.000268329 Jy ! Component: 750 - total flux cleaned = -0.000268216 Jy ! Component: 800 - total flux cleaned = -0.000326775 Jy ! Component: 850 - total flux cleaned = -0.000303607 Jy ! Component: 900 - total flux cleaned = -0.000360982 Jy ! Component: 950 - total flux cleaned = -0.000349726 Jy ! Component: 1000 - total flux cleaned = -0.000372013 Jy ! Component: 1050 - total flux cleaned = -0.000338841 Jy ! Component: 1100 - total flux cleaned = -0.000349893 Jy ! Component: 1150 - total flux cleaned = -0.000349906 Jy ! Component: 1200 - total flux cleaned = -0.000339183 Jy ! Component: 1250 - total flux cleaned = -0.000317887 Jy ! Component: 1300 - total flux cleaned = -0.000296886 Jy ! Component: 1350 - total flux cleaned = -0.000265724 Jy ! Component: 1400 - total flux cleaned = -0.000276109 Jy ! Component: 1450 - total flux cleaned = -0.000276122 Jy ! Component: 1500 - total flux cleaned = -0.000255927 Jy ! Component: 1550 - total flux cleaned = -0.000245913 Jy ! Component: 1600 - total flux cleaned = -0.000216213 Jy ! Component: 1650 - total flux cleaned = -0.000216168 Jy ! Component: 1700 - total flux cleaned = -0.000187065 Jy ! Component: 1750 - total flux cleaned = -0.00018718 Jy ! Component: 1800 - total flux cleaned = -0.000148992 Jy ! Component: 1850 - total flux cleaned = -0.000158481 Jy ! Component: 1900 - total flux cleaned = -0.000130253 Jy ! Component: 1950 - total flux cleaned = -0.000158212 Jy ! Component: 2000 - total flux cleaned = -6.56872e-05 Jy ! Component: 2050 - total flux cleaned = -8.40769e-05 Jy ! Component: 2100 - total flux cleaned = -8.41173e-05 Jy ! Component: 2150 - total flux cleaned = -0.000138298 Jy ! Component: 2200 - total flux cleaned = -9.34121e-05 Jy ! Component: 2250 - total flux cleaned = -8.4493e-05 Jy ! Component: 2300 - total flux cleaned = -7.56662e-05 Jy ! Component: 2350 - total flux cleaned = -6.69871e-05 Jy ! Component: 2400 - total flux cleaned = -5.82433e-05 Jy ! Component: 2450 - total flux cleaned = -5.82801e-05 Jy ! Component: 2500 - total flux cleaned = -5.82548e-05 Jy ! Component: 2550 - total flux cleaned = -5.82814e-05 Jy ! Component: 2600 - total flux cleaned = -3.28879e-05 Jy ! Component: 2650 - total flux cleaned = -5.81677e-05 Jy ! Component: 2700 - total flux cleaned = -5.81551e-05 Jy ! Component: 2750 - total flux cleaned = -4.98722e-05 Jy ! Component: 2800 - total flux cleaned = -4.97665e-05 Jy ! Component: 2850 - total flux cleaned = -4.96896e-05 Jy ! Component: 2900 - total flux cleaned = -1.71192e-05 Jy ! Component: 2950 - total flux cleaned = 7.18747e-06 Jy ! Component: 3000 - total flux cleaned = -8.80244e-07 Jy ! Component: 3050 - total flux cleaned = 2.30756e-05 Jy ! Component: 3100 - total flux cleaned = 3.89548e-05 Jy ! Component: 3150 - total flux cleaned = 5.48056e-05 Jy ! Component: 3200 - total flux cleaned = 7.05451e-05 Jy ! Component: 3250 - total flux cleaned = 0.000101722 Jy ! Component: 3300 - total flux cleaned = 0.000132762 Jy ! Component: 3350 - total flux cleaned = 0.000124982 Jy ! Component: 3400 - total flux cleaned = 0.000178602 Jy ! Component: 3450 - total flux cleaned = 0.000171044 Jy ! Component: 3500 - total flux cleaned = 0.000186181 Jy ! Component: 3550 - total flux cleaned = 0.000216207 Jy ! Component: 3600 - total flux cleaned = 0.000246065 Jy ! Component: 3650 - total flux cleaned = 0.000283173 Jy ! Component: 3700 - total flux cleaned = 0.000261006 Jy ! Component: 3750 - total flux cleaned = 0.000305132 Jy ! Component: 3800 - total flux cleaned = 0.000297878 Jy ! Component: 3850 - total flux cleaned = 0.000334163 Jy ! Component: 3900 - total flux cleaned = 0.000334189 Jy ! Component: 3950 - total flux cleaned = 0.000326948 Jy ! Component: 4000 - total flux cleaned = 0.000348395 Jy ! Component: 4050 - total flux cleaned = 0.000391088 Jy ! Total flux subtracted in 4096 components = 0.000362837 Jy ! Clean residual min=-0.000374 max=0.000397 Jy/beam ! Clean residual mean=0.000000 rms=0.000119 Jy/beam ! Combined flux in latest and established models = 0.0634314 Jy keep ! Adding 310 model components to the UV plane model. ! The established model now contains 360 components and 0.0634314 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J2027-2136_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8156 x 2.037 at -4.328 degrees (North through East) ! Clean map min=-0.0008626 max=0.047328 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J2027-2136_X_a_map.fits wmodel /vlbi/uf001/uva//J2027-2136_X_a_map.mod ! Writing 360 model components to file: /vlbi/uf001/uva//J2027-2136_X_a_map.mod wobs /vlbi/uf001/uva//J2027-2136_X_a_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J2027-2136_X_a_uvs.fits wwins /vlbi/uf001/uva//J2027-2136_X_a_map.win ! wwins: Wrote 3 windows to /vlbi/uf001/uva//J2027-2136_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0473278 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000118457 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.750871 0.750871 1.50174 3.00348 6.00697 12.0139 24.0279 48.0557 96.1115 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.047 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 399.536 quit ! Quitting program ! Log file /vlbi/uf001/uva//J2027-2136_X_a_dfm.log closed on Mon Jan 14 05:30:31 2019