! Started logfile: /vlbi/uf001/uva//J2027-2136_S_a_dfm.log on Mon Jan 14 05:30:15 2019 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /vlbi/uf001/uva//J2027-2136_S_a_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J2027-2136_S_a_uva.fits ! AN table 1: 58 integrations on 45 of 45 possible baselines. ! Apparent sampling: 1 visibilities/baseline/integration-bin. ! Found source: J2027-2136 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 44 lines of history. ! ! Reading 7830 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J2027-2136_S_a] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.000687Jy sigma=16.985891 ! Fit after self-cal, rms=0.951627Jy sigma=16.153159 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.552 mas, bmaj=6.935 mas, bpa=-6.881 degrees ! Estimated noise=0.713096 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0392718 Jy ! Component: 100 - total flux cleaned = 0.0486899 Jy ! Total flux subtracted in 100 components = 0.0486899 Jy ! Clean residual min=-0.003552 max=0.003871 Jy/beam ! Clean residual mean=-0.000005 rms=0.000924 Jy/beam ! Combined flux in latest and established models = 0.0486899 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.0486899 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.073995Jy sigma=1.236222 ! Fit after self-cal, rms=0.072591Jy sigma=1.212965 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.038 mas, bmaj=7.801 mas, bpa=-5.96 degrees ! Estimated noise=0.483057 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0059791 Jy ! Component: 100 - total flux cleaned = 0.00889223 Jy ! Component: 150 - total flux cleaned = 0.0105148 Jy ! Component: 200 - total flux cleaned = 0.0111754 Jy ! Total flux subtracted in 200 components = 0.0111754 Jy ! Clean residual min=-0.002496 max=0.002829 Jy/beam ! Clean residual mean=0.000001 rms=0.000661 Jy/beam ! Combined flux in latest and established models = 0.0598653 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 35 components and 0.0598653 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.072147Jy sigma=1.204899 ! Fit after self-cal, rms=0.072103Jy sigma=1.204310 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.038 x 7.801 at -5.96 degrees (North through East) ! Clean map min=-0.0024353 max=0.05187 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.95 HN 0.99 KP 1.01 ! LA 0.89 MK 0.99 NL 1.04 OV 1.02 ! PT 1.00 SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.92 HN 1.04 KP 1.03 ! LA 0.96 MK 0.99 NL 1.09 OV 0.95 ! PT 1.02 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.87 HN 1.03 KP 1.00 ! LA 0.93 MK 1.09 NL 1.05 OV 1.06 ! PT 1.00 SC 0.99 ! ! ! Fit before self-cal, rms=0.072103Jy sigma=1.204310 ! Fit after self-cal, rms=0.072168Jy sigma=1.202266 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.067 mas, bmaj=7.877 mas, bpa=-5.863 degrees ! Estimated noise=0.480632 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000256338 Jy ! Component: 100 - total flux cleaned = -0.00011956 Jy ! Component: 150 - total flux cleaned = -7.08548e-05 Jy ! Component: 200 - total flux cleaned = -2.59461e-05 Jy ! Total flux subtracted in 200 components = -2.59461e-05 Jy ! Clean residual min=-0.002296 max=0.002564 Jy/beam ! Clean residual mean=0.000006 rms=0.000600 Jy/beam ! Combined flux in latest and established models = 0.0598393 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 40 components and 0.0598393 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.072147Jy sigma=1.201985 ! Fit after self-cal, rms=0.072228Jy sigma=1.201643 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.072228Jy sigma=1.201643 ! Fit after self-cal, rms=0.073077Jy sigma=1.199885 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.082 mas, bmaj=7.908 mas, bpa=-6.08 degrees ! Estimated noise=0.482698 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.00617e-05 Jy ! Component: 100 - total flux cleaned = 1.16069e-05 Jy ! Component: 150 - total flux cleaned = 7.15934e-05 Jy ! Component: 200 - total flux cleaned = 0.0001079 Jy ! Total flux subtracted in 200 components = 0.0001079 Jy ! Clean residual min=-0.002329 max=0.002595 Jy/beam ! Clean residual mean=0.000003 rms=0.000577 Jy/beam ! Combined flux in latest and established models = 0.0599472 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 42 components and 0.0599472 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.073062Jy sigma=1.199707 ! Fit after self-cal, rms=0.073102Jy sigma=1.199549 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (67, 90.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00191691 Jy ! Component: 100 - total flux cleaned = 0.00209448 Jy ! Component: 150 - total flux cleaned = 0.00212742 Jy ! Component: 200 - total flux cleaned = 0.00212666 Jy ! Total flux subtracted in 200 components = 0.00212666 Jy ! Clean residual min=-0.002066 max=0.002097 Jy/beam ! Clean residual mean=0.000002 rms=0.000548 Jy/beam ! Combined flux in latest and established models = 0.0620739 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 61 components and 0.0620739 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.073031Jy sigma=1.198364 ! Fit after self-cal, rms=0.073018Jy sigma=1.198146 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.073018Jy sigma=1.198146 ! Fit after self-cal, rms=0.073138Jy sigma=1.197955 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.084 mas, bmaj=7.928 mas, bpa=-6.239 degrees ! Estimated noise=0.480906 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000547012 Jy ! Component: 100 - total flux cleaned = 0.000486341 Jy ! Component: 150 - total flux cleaned = 0.000405412 Jy ! Component: 200 - total flux cleaned = 0.000332049 Jy ! Total flux subtracted in 200 components = 0.000332049 Jy ! Clean residual min=-0.002077 max=0.002077 Jy/beam ! Clean residual mean=0.000002 rms=0.000539 Jy/beam ! Combined flux in latest and established models = 0.0624059 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 68 components and 0.0624059 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.073113Jy sigma=1.197566 ! Fit after self-cal, rms=0.073126Jy sigma=1.197502 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000109758 Jy ! Component: 100 - total flux cleaned = 4.02013e-05 Jy ! Component: 150 - total flux cleaned = 4.03481e-05 Jy ! Component: 200 - total flux cleaned = 6.01851e-05 Jy ! Total flux subtracted in 200 components = 6.01851e-05 Jy ! Clean residual min=-0.002038 max=0.002091 Jy/beam ! Clean residual mean=0.000002 rms=0.000537 Jy/beam ! Combined flux in latest and established models = 0.0624661 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 72 components and 0.0624661 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.073112Jy sigma=1.197307 ! Fit after self-cal, rms=0.073112Jy sigma=1.197294 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.073112Jy sigma=1.197294 ! Fit after self-cal, rms=0.073181Jy sigma=1.197277 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.459 mas, bmaj=16.34 mas, bpa=-1.739 degrees ! Estimated noise=0.622097 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00088826 Jy ! Component: 100 - total flux cleaned = 0.000966667 Jy ! Component: 150 - total flux cleaned = 0.000951913 Jy ! Component: 200 - total flux cleaned = 0.000965949 Jy ! Total flux subtracted in 200 components = 0.000965949 Jy ! Clean residual min=-0.002591 max=0.002247 Jy/beam ! Clean residual mean=0.000002 rms=0.000677 Jy/beam ! Combined flux in latest and established models = 0.0634321 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 82 components and 0.0634321 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.073182Jy sigma=1.197305 ! Fit after self-cal, rms=0.073184Jy sigma=1.197220 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.42893e-05 Jy ! Component: 100 - total flux cleaned = 0.000127044 Jy ! Component: 150 - total flux cleaned = 0.00012738 Jy ! Component: 200 - total flux cleaned = 0.000127656 Jy ! Total flux subtracted in 200 components = 0.000127656 Jy ! Clean residual min=-0.002567 max=0.002241 Jy/beam ! Clean residual mean=0.000002 rms=0.000677 Jy/beam ! Combined flux in latest and established models = 0.0635597 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 87 components and 0.0635597 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.073185Jy sigma=1.197281 ! Fit after self-cal, rms=0.073184Jy sigma=1.197223 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.087 mas, bmaj=7.94 mas, bpa=-6.274 degrees ! Estimated noise=0.480745 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.087 x 7.94 at -6.274 degrees (North through East) ! Clean map min=-0.0019402 max=0.051336 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.591 mas, bmaj=6.983 mas, bpa=-7.327 degrees ! Estimated noise=0.715579 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0400155 Jy ! Component: 100 - total flux cleaned = 0.0496161 Jy ! Component: 150 - total flux cleaned = 0.0540185 Jy ! Component: 200 - total flux cleaned = 0.0563942 Jy ! Total flux subtracted in 200 components = 0.0563942 Jy ! Clean residual min=-0.003261 max=0.003794 Jy/beam ! Clean residual mean=-0.000000 rms=0.000805 Jy/beam ! Combined flux in latest and established models = 0.0563942 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.0563942 Jy ! Inverting map and beam ! Estimated beam: bmin=3.087 mas, bmaj=7.94 mas, bpa=-6.274 degrees ! Estimated noise=0.480745 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4, 2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00353134 Jy ! Component: 100 - total flux cleaned = 0.00528778 Jy ! Component: 150 - total flux cleaned = 0.00591779 Jy ! Component: 200 - total flux cleaned = 0.00613572 Jy ! Total flux subtracted in 200 components = 0.00613572 Jy ! Clean residual min=-0.002233 max=0.002100 Jy/beam ! Clean residual mean=0.000002 rms=0.000553 Jy/beam ! Combined flux in latest and established models = 0.0625299 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 53 components and 0.0625299 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.459 mas, bmaj=16.34 mas, bpa=-1.739 degrees ! Estimated noise=0.622097 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00126835 Jy ! Component: 100 - total flux cleaned = 0.00147188 Jy ! Component: 150 - total flux cleaned = 0.00152877 Jy ! Component: 200 - total flux cleaned = 0.00155333 Jy ! Total flux subtracted in 200 components = 0.00155333 Jy ! Clean residual min=-0.002681 max=0.002244 Jy/beam ! Clean residual mean=0.000002 rms=0.000674 Jy/beam ! Combined flux in latest and established models = 0.0640833 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.58858e-07 Jy ! Component: 100 - total flux cleaned = 1.62477e-06 Jy ! Component: 150 - total flux cleaned = -3.39123e-05 Jy ! Component: 200 - total flux cleaned = -3.3111e-05 Jy ! Total flux subtracted in 200 components = -3.3111e-05 Jy ! Clean residual min=-0.002681 max=0.002222 Jy/beam ! Clean residual mean=0.000002 rms=0.000667 Jy/beam ! Combined flux in latest and established models = 0.0640501 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 78 components and 0.0640501 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.087 mas, bmaj=7.94 mas, bpa=-6.274 degrees ! Estimated noise=0.480745 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000725624 Jy ! Component: 100 - total flux cleaned = -0.000808875 Jy ! Component: 150 - total flux cleaned = -0.000741466 Jy ! Component: 200 - total flux cleaned = -0.000677781 Jy ! Total flux subtracted in 200 components = -0.000677781 Jy ! Clean residual min=-0.002151 max=0.001986 Jy/beam ! Clean residual mean=0.000002 rms=0.000521 Jy/beam ! Combined flux in latest and established models = 0.0633724 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 91 components and 0.0633724 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.073161Jy sigma=1.196849 ! Fit after self-cal, rms=0.073146Jy sigma=1.196601 wmodel J2027-2136_S_a_map.mod ! Writing 91 model components to file: J2027-2136_S_a_map.mod wobs J2027-2136_S_a_uvs.fits ! Writing UV FITS file: J2027-2136_S_a_uvs.fits wwins J2027-2136_S_a_map.win ! wwins: Wrote 3 windows to J2027-2136_S_a_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000209933 Jy ! Component: 100 - total flux cleaned = -0.000207722 Jy ! Component: 150 - total flux cleaned = -0.00037139 Jy ! Component: 200 - total flux cleaned = -0.000465546 Jy ! Component: 250 - total flux cleaned = -0.000616853 Jy ! Component: 300 - total flux cleaned = -0.000674524 Jy ! Component: 350 - total flux cleaned = -0.000731839 Jy ! Component: 400 - total flux cleaned = -0.000899106 Jy ! Component: 450 - total flux cleaned = -0.00106172 Jy ! Component: 500 - total flux cleaned = -0.00122032 Jy ! Component: 550 - total flux cleaned = -0.00132383 Jy ! Component: 600 - total flux cleaned = -0.00144946 Jy ! Component: 650 - total flux cleaned = -0.00147438 Jy ! Component: 700 - total flux cleaned = -0.00152337 Jy ! Component: 750 - total flux cleaned = -0.00157075 Jy ! Component: 800 - total flux cleaned = -0.00145398 Jy ! Component: 850 - total flux cleaned = -0.00140798 Jy ! Component: 900 - total flux cleaned = -0.00129508 Jy ! Component: 950 - total flux cleaned = -0.00125032 Jy ! Component: 1000 - total flux cleaned = -0.00109694 Jy ! Component: 1050 - total flux cleaned = -0.000967632 Jy ! Component: 1100 - total flux cleaned = -0.000819126 Jy ! Component: 1150 - total flux cleaned = -0.000714932 Jy ! Component: 1200 - total flux cleaned = -0.000591007 Jy ! Component: 1250 - total flux cleaned = -0.000509654 Jy ! Component: 1300 - total flux cleaned = -0.000409266 Jy ! Component: 1350 - total flux cleaned = -0.000250844 Jy ! Component: 1400 - total flux cleaned = -0.000133607 Jy ! Component: 1450 - total flux cleaned = 3.99935e-05 Jy ! Component: 1500 - total flux cleaned = 9.74161e-05 Jy ! Component: 1550 - total flux cleaned = 0.000285435 Jy ! Component: 1600 - total flux cleaned = 0.000322348 Jy ! Component: 1650 - total flux cleaned = 0.000469628 Jy ! Component: 1700 - total flux cleaned = 0.000524276 Jy ! Component: 1750 - total flux cleaned = 0.000631773 Jy ! Component: 1800 - total flux cleaned = 0.000721051 Jy ! Component: 1850 - total flux cleaned = 0.000861194 Jy ! Component: 1900 - total flux cleaned = 0.000878755 Jy ! Component: 1950 - total flux cleaned = 0.000947034 Jy ! Component: 2000 - total flux cleaned = 0.000980767 Jy ! Component: 2050 - total flux cleaned = 0.00108083 Jy ! Component: 2100 - total flux cleaned = 0.00116397 Jy ! Component: 2150 - total flux cleaned = 0.0011967 Jy ! Component: 2200 - total flux cleaned = 0.00132586 Jy ! Component: 2250 - total flux cleaned = 0.00137372 Jy ! Component: 2300 - total flux cleaned = 0.00151605 Jy ! Component: 2350 - total flux cleaned = 0.00156305 Jy ! Component: 2400 - total flux cleaned = 0.001563 Jy ! Component: 2450 - total flux cleaned = 0.00165482 Jy ! Component: 2500 - total flux cleaned = 0.00165455 Jy ! Component: 2550 - total flux cleaned = 0.00172955 Jy ! Component: 2600 - total flux cleaned = 0.00175912 Jy ! Component: 2650 - total flux cleaned = 0.0018329 Jy ! Component: 2700 - total flux cleaned = 0.00192017 Jy ! Component: 2750 - total flux cleaned = 0.00200697 Jy ! Component: 2800 - total flux cleaned = 0.00207846 Jy ! Component: 2850 - total flux cleaned = 0.00210694 Jy ! Component: 2900 - total flux cleaned = 0.00216314 Jy ! Component: 2950 - total flux cleaned = 0.00226074 Jy ! Component: 3000 - total flux cleaned = 0.00227435 Jy ! Component: 3050 - total flux cleaned = 0.00239775 Jy ! Component: 3100 - total flux cleaned = 0.00242498 Jy ! Component: 3150 - total flux cleaned = 0.00250566 Jy ! Component: 3200 - total flux cleaned = 0.00257254 Jy ! Component: 3250 - total flux cleaned = 0.00269167 Jy ! Component: 3300 - total flux cleaned = 0.00275747 Jy ! Component: 3350 - total flux cleaned = 0.00283566 Jy ! Component: 3400 - total flux cleaned = 0.00290051 Jy ! Component: 3450 - total flux cleaned = 0.00300333 Jy ! Component: 3500 - total flux cleaned = 0.00316903 Jy ! Component: 3550 - total flux cleaned = 0.0032197 Jy ! Component: 3600 - total flux cleaned = 0.00333275 Jy ! Component: 3650 - total flux cleaned = 0.00338274 Jy ! Component: 3700 - total flux cleaned = 0.00351894 Jy ! Component: 3750 - total flux cleaned = 0.00359268 Jy ! Component: 3800 - total flux cleaned = 0.00366591 Jy ! Component: 3850 - total flux cleaned = 0.00375068 Jy ! Component: 3900 - total flux cleaned = 0.00384707 Jy ! Component: 3950 - total flux cleaned = 0.00390683 Jy ! Component: 4000 - total flux cleaned = 0.00396612 Jy ! Component: 4050 - total flux cleaned = 0.00403685 Jy ! Total flux subtracted in 4096 components = 0.00407193 Jy ! Clean residual min=-0.000770 max=0.000671 Jy/beam ! Clean residual mean=0.000001 rms=0.000215 Jy/beam ! Combined flux in latest and established models = 0.0674443 Jy keep ! Adding 296 model components to the UV plane model. ! The established model now contains 387 components and 0.0674443 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J2027-2136_S_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.087 x 7.94 at -6.274 degrees (North through East) ! Clean map min=-0.0012749 max=0.051514 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J2027-2136_S_a_map.fits wmodel /vlbi/uf001/uva//J2027-2136_S_a_map.mod ! Writing 387 model components to file: /vlbi/uf001/uva//J2027-2136_S_a_map.mod wobs /vlbi/uf001/uva//J2027-2136_S_a_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J2027-2136_S_a_uvs.fits wwins /vlbi/uf001/uva//J2027-2136_S_a_map.win ! wwins: Wrote 4 windows to /vlbi/uf001/uva//J2027-2136_S_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0515143 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000211104 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.22939 1.22939 2.45878 4.91756 9.83512 19.6702 39.3405 78.6809 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.051 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 244.023 quit ! Quitting program ! Log file /vlbi/uf001/uva//J2027-2136_S_a_dfm.log closed on Mon Jan 14 05:30:20 2019