! Started logfile: /vlbi/uf001/uvm//J2022-4038_X_a_dfm.log on Sun Jan 13 22:28:22 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uvm//J2022-4038_X_a_uvm.fits ! Reading UV FITS file: /vlbi/uf001/uvm//J2022-4038_X_a_uvm.fits ! AN table 1: 58 integrations on 36 of 36 possible baselines. ! AN table 2: 58 integrations on 21 of 21 possible baselines. ! Apparent sampling: 0.808832 visibilities/baseline/integration-bin. ! Found source: J2022-4038 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 32088 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J2022-4038_X_a] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 76 telescope corrections were flagged in sub-array 1. ! A total of 44 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 76 telescope corrections were flagged in sub-array 1. ! A total of 44 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 76 telescope corrections were flagged in sub-array 1. ! A total of 44 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 76 telescope corrections were flagged in sub-array 1. ! A total of 44 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 5. ! A total of 76 telescope corrections were flagged in sub-array 1. ! A total of 44 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 6. ! A total of 76 telescope corrections were flagged in sub-array 1. ! A total of 44 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 7. ! A total of 76 telescope corrections were flagged in sub-array 1. ! A total of 44 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 8. ! A total of 76 telescope corrections were flagged in sub-array 1. ! A total of 44 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 9. ! A total of 76 telescope corrections were flagged in sub-array 1. ! A total of 44 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 10. ! A total of 76 telescope corrections were flagged in sub-array 1. ! A total of 44 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 11. ! A total of 76 telescope corrections were flagged in sub-array 1. ! A total of 44 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 12. ! A total of 76 telescope corrections were flagged in sub-array 1. ! A total of 44 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.012634Jy sigma=16.716656 ! Fit after self-cal, rms=0.889091Jy sigma=14.443005 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.5649 mas, bmaj=1.646 mas, bpa=-11.59 degrees ! Estimated noise=0.558293 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0889295 Jy ! Component: 100 - total flux cleaned = 0.109212 Jy ! Total flux subtracted in 100 components = 0.109212 Jy ! Clean residual min=-0.008740 max=0.015276 Jy/beam ! Clean residual mean=0.000019 rms=0.001868 Jy/beam ! Combined flux in latest and established models = 0.109212 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.109212 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.092362Jy sigma=1.350779 ! Fit after self-cal, rms=0.092060Jy sigma=1.348008 ! Inverting map ! Added new window around map position (-0.6, -2.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0134072 Jy ! Component: 100 - total flux cleaned = 0.0203042 Jy ! Total flux subtracted in 100 components = 0.0203042 Jy ! Clean residual min=-0.008431 max=0.011633 Jy/beam ! Clean residual mean=0.000014 rms=0.001612 Jy/beam ! Combined flux in latest and established models = 0.129516 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 17 components and 0.129516 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.090036Jy sigma=1.290108 ! Fit after self-cal, rms=0.089760Jy sigma=1.284105 ! Inverting map ! Added new window around map position (-1.6, -0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0102722 Jy ! Component: 100 - total flux cleaned = 0.0134586 Jy ! Total flux subtracted in 100 components = 0.0134586 Jy ! Clean residual min=-0.006855 max=0.008899 Jy/beam ! Clean residual mean=0.000011 rms=0.001449 Jy/beam ! Combined flux in latest and established models = 0.142975 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 23 components and 0.142975 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.088845Jy sigma=1.262627 ! Fit after self-cal, rms=0.088707Jy sigma=1.257839 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7691 mas, bmaj=2.163 mas, bpa=-10.96 degrees ! Estimated noise=0.251096 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1.6, 0.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0101299 Jy ! Component: 100 - total flux cleaned = 0.0165773 Jy ! Component: 150 - total flux cleaned = 0.0204091 Jy ! Component: 200 - total flux cleaned = 0.0218515 Jy ! Total flux subtracted in 200 components = 0.0218515 Jy ! Clean residual min=-0.006296 max=0.007017 Jy/beam ! Clean residual mean=0.000028 rms=0.001464 Jy/beam ! Combined flux in latest and established models = 0.164826 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 43 components and 0.164826 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.087196Jy sigma=1.233984 ! Fit after self-cal, rms=0.087135Jy sigma=1.232392 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7691 x 2.163 at -10.96 degrees (North through East) ! Clean map min=-0.0057695 max=0.10769 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.04 HN 1.48 KP 1.01 LA 0.94 ! MK 0.89 NL 1.45 OV 0.88 PT 0.93 ! SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.95 HN 1.68 KP 1.07 LA 1.05 ! MK 1.13 NL 1.21 OV 0.91 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00 HN 1.49 KP 0.99 LA 0.93 ! MK 0.91 NL 1.32 OV 0.87 PT 0.96 ! SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.99 HN 1.58 KP 1.06 LA 1.01 ! MK 1.15 NL 1.23 OV 0.90 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00 HN 1.55 KP 0.98 LA 0.94 ! MK 0.91 NL 1.56 OV 0.91 PT 0.92 ! SC 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.02 HN 1.32 KP 1.08 LA 1.01 ! MK 1.11 NL 1.13 OV 0.87 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00 HN 1.65 KP 0.94 LA 0.94 ! MK 0.96 NL 1.41 OV 0.88 PT 0.93 ! SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.01 HN 1.40 KP 1.06 LA 0.98 ! MK 1.09 NL 1.13 OV 0.89 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! FD 0.98 HN 1.54 KP 0.97 LA 0.96 ! MK 0.96 NL 1.41 OV 0.89 PT 0.92 ! SC 1.03 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.02 HN 1.10 KP 1.08 LA 1.03 ! MK 1.13 NL 1.17 OV 0.87 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! FD 1.01 HN 1.42 KP 0.98 LA 0.96 ! MK 0.94 NL 1.39 OV 0.87 PT 0.94 ! SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.96 HN 1.22 KP 1.10 LA 1.02 ! MK 1.15 NL 1.21 OV 0.87 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! FD 1.01 HN 1.33 KP 0.96 LA 0.93 ! MK 0.94 NL 1.47 OV 0.90 PT 0.96 ! SC 1.03 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.97 HN 1.28 KP 1.09 LA 1.08 ! MK 1.13 NL 1.19 OV 0.84 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! FD 1.02 HN 1.41 KP 0.96 LA 0.99 ! MK 0.95 NL 1.46 OV 0.88 PT 0.92 ! SC 1.05 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.01 HN 1.41 KP 1.03 LA 1.03 ! MK 1.10 NL 1.11 OV 0.90 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! FD 1.03 HN 1.43 KP 0.93 LA 0.98 ! MK 0.92 NL 1.51 OV 0.88 PT 0.95 ! SC 1.03 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.00 HN 1.24 KP 1.11 LA 1.03 ! MK 1.15 NL 1.23 OV 0.87 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! FD 1.01 HN 1.30 KP 0.96 LA 1.00 ! MK 0.96 NL 1.50 OV 0.83 PT 0.93 ! SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.97 HN 1.44 KP 1.10 LA 1.03 ! MK 1.10 NL 1.19 OV 0.92 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00 HN 1.33 KP 1.03 LA 0.98 ! MK 0.91 NL 1.35 OV 0.89 PT 0.93 ! SC 1.13 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.01 HN 1.16 KP 1.05 LA 1.06 ! MK 1.10 NL 1.11 OV 0.87 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! FD 1.02 HN 1.22 KP 0.85 LA 0.99 ! MK 0.99 NL 1.44 OV 0.84 PT 0.91 ! SC 1.04 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.00 HN 1.56 KP 1.04 LA 1.02 ! MK 1.11 NL 1.15 OV 0.88 ! ! ! Fit before self-cal, rms=0.087135Jy sigma=1.232392 ! Fit after self-cal, rms=0.106951Jy sigma=1.193906 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7765 mas, bmaj=2.149 mas, bpa=-10.5 degrees ! Estimated noise=0.260033 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00326938 Jy ! Component: 100 - total flux cleaned = -0.00352797 Jy ! Component: 150 - total flux cleaned = -0.00363879 Jy ! Component: 200 - total flux cleaned = -0.00364571 Jy ! Total flux subtracted in 200 components = -0.00364571 Jy ! Clean residual min=-0.003742 max=0.004734 Jy/beam ! Clean residual mean=0.000008 rms=0.000905 Jy/beam ! Combined flux in latest and established models = 0.16118 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 57 components and 0.16118 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.106636Jy sigma=1.188534 ! Fit after self-cal, rms=0.107173Jy sigma=1.187131 ! Inverting map ! Added new window around map position (4, -5.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00408095 Jy ! Component: 100 - total flux cleaned = 0.00522146 Jy ! Component: 150 - total flux cleaned = 0.00568832 Jy ! Component: 200 - total flux cleaned = 0.00593646 Jy ! Total flux subtracted in 200 components = 0.00593646 Jy ! Clean residual min=-0.003129 max=0.003795 Jy/beam ! Clean residual mean=0.000005 rms=0.000765 Jy/beam ! Combined flux in latest and established models = 0.167117 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 74 components and 0.167117 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.106907Jy sigma=1.182077 ! Fit after self-cal, rms=0.106848Jy sigma=1.181484 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.106848Jy sigma=1.181484 ! Fit after self-cal, rms=0.109796Jy sigma=1.177024 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7797 mas, bmaj=2.145 mas, bpa=-10.6 degrees ! Estimated noise=0.258204 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00126232 Jy ! Component: 100 - total flux cleaned = -0.00101365 Jy ! Component: 150 - total flux cleaned = -0.000872272 Jy ! Component: 200 - total flux cleaned = -0.000811704 Jy ! Total flux subtracted in 200 components = -0.000811704 Jy ! Clean residual min=-0.002392 max=0.003241 Jy/beam ! Clean residual mean=0.000006 rms=0.000624 Jy/beam ! Combined flux in latest and established models = 0.166305 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 83 components and 0.166305 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.109655Jy sigma=1.174704 ! Fit after self-cal, rms=0.109705Jy sigma=1.174407 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (7.6, -7.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00285188 Jy ! Component: 100 - total flux cleaned = 0.00409009 Jy ! Component: 150 - total flux cleaned = 0.00509904 Jy ! Component: 200 - total flux cleaned = 0.00581823 Jy ! Total flux subtracted in 200 components = 0.00581823 Jy ! Clean residual min=-0.002083 max=0.002439 Jy/beam ! Clean residual mean=0.000004 rms=0.000527 Jy/beam ! Combined flux in latest and established models = 0.172123 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 100 components and 0.172123 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.109628Jy sigma=1.171763 ! Fit after self-cal, rms=0.109614Jy sigma=1.171516 ! Inverting map ! Added new window around map position (10.8, 3.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00160065 Jy ! Component: 100 - total flux cleaned = 0.00252059 Jy ! Component: 150 - total flux cleaned = 0.00308021 Jy ! Component: 200 - total flux cleaned = 0.00329033 Jy ! Total flux subtracted in 200 components = 0.00329033 Jy ! Clean residual min=-0.001852 max=0.002040 Jy/beam ! Clean residual mean=0.000003 rms=0.000477 Jy/beam ! Combined flux in latest and established models = 0.175414 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 117 components and 0.175414 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.109547Jy sigma=1.170387 ! Fit after self-cal, rms=0.109547Jy sigma=1.170274 ! Inverting map ! Added new window around map position (16, -33.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000784449 Jy ! Component: 100 - total flux cleaned = 0.000731428 Jy ! Component: 150 - total flux cleaned = 0.000858405 Jy ! Component: 200 - total flux cleaned = 0.000973895 Jy ! Total flux subtracted in 200 components = 0.000973895 Jy ! Clean residual min=-0.001912 max=0.001880 Jy/beam ! Clean residual mean=0.000003 rms=0.000459 Jy/beam ! Combined flux in latest and established models = 0.176387 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 134 components and 0.176387 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.109486Jy sigma=1.169443 ! Fit after self-cal, rms=0.109487Jy sigma=1.169344 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.109487Jy sigma=1.169344 ! Fit after self-cal, rms=0.112324Jy sigma=1.166013 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7816 mas, bmaj=2.151 mas, bpa=-10.33 degrees ! Estimated noise=0.258437 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00104705 Jy ! Component: 100 - total flux cleaned = -0.000898845 Jy ! Component: 150 - total flux cleaned = -0.000896879 Jy ! Component: 200 - total flux cleaned = -0.000864327 Jy ! Total flux subtracted in 200 components = -0.000864327 Jy ! Clean residual min=-0.001700 max=0.001675 Jy/beam ! Clean residual mean=0.000001 rms=0.000368 Jy/beam ! Combined flux in latest and established models = 0.175523 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 155 components and 0.175523 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.112292Jy sigma=1.165502 ! Fit after self-cal, rms=0.112330Jy sigma=1.165385 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000107838 Jy ! Component: 100 - total flux cleaned = -7.72916e-05 Jy ! Component: 150 - total flux cleaned = -4.91911e-05 Jy ! Component: 200 - total flux cleaned = -4.96246e-05 Jy ! Total flux subtracted in 200 components = -4.96246e-05 Jy ! Clean residual min=-0.001662 max=0.001660 Jy/beam ! Clean residual mean=0.000001 rms=0.000360 Jy/beam ! Combined flux in latest and established models = 0.175473 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 172 components and 0.175473 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.112310Jy sigma=1.165128 ! Fit after self-cal, rms=0.112309Jy sigma=1.165098 ! Inverting map ! Added new window around map position (-11, -14.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00137583 Jy ! Component: 100 - total flux cleaned = 0.00133526 Jy ! Component: 150 - total flux cleaned = 0.00149068 Jy ! Component: 200 - total flux cleaned = 0.00163414 Jy ! Total flux subtracted in 200 components = 0.00163414 Jy ! Clean residual min=-0.001540 max=0.001262 Jy/beam ! Clean residual mean=0.000001 rms=0.000335 Jy/beam ! Combined flux in latest and established models = 0.177108 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 187 components and 0.177108 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.112274Jy sigma=1.164591 ! Fit after self-cal, rms=0.112259Jy sigma=1.164540 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.112259Jy sigma=1.164540 ! Fit after self-cal, rms=0.112847Jy sigma=1.164420 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.34 mas, bmaj=8.306 mas, bpa=-3.204 degrees ! Estimated noise=0.32235 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00024814 Jy ! Component: 100 - total flux cleaned = 0.000600749 Jy ! Component: 150 - total flux cleaned = 0.000739902 Jy ! Component: 200 - total flux cleaned = 0.000779758 Jy ! Total flux subtracted in 200 components = 0.000779758 Jy ! Clean residual min=-0.001609 max=0.001393 Jy/beam ! Clean residual mean=0.000001 rms=0.000407 Jy/beam ! Combined flux in latest and established models = 0.177887 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 201 components and 0.177887 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.112832Jy sigma=1.164296 ! Fit after self-cal, rms=0.112828Jy sigma=1.164245 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.66293e-05 Jy ! Component: 100 - total flux cleaned = -1.68149e-05 Jy ! Component: 150 - total flux cleaned = -1.59633e-05 Jy ! Component: 200 - total flux cleaned = -3.06715e-05 Jy ! Total flux subtracted in 200 components = -3.06715e-05 Jy ! Clean residual min=-0.001574 max=0.001432 Jy/beam ! Clean residual mean=0.000002 rms=0.000398 Jy/beam ! Combined flux in latest and established models = 0.177857 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 210 components and 0.177857 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.112820Jy sigma=1.164217 ! Fit after self-cal, rms=0.112817Jy sigma=1.164202 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.7814 mas, bmaj=2.149 mas, bpa=-10.29 degrees ! Estimated noise=0.257956 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7814 x 2.149 at -10.29 degrees (North through East) ! Clean map min=-0.0030045 max=0.11292 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.5692 mas, bmaj=1.619 mas, bpa=-10.62 degrees ! Estimated noise=0.585002 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0922174 Jy ! Component: 100 - total flux cleaned = 0.115828 Jy ! Component: 150 - total flux cleaned = 0.127726 Jy ! Component: 200 - total flux cleaned = 0.135577 Jy ! Total flux subtracted in 200 components = 0.135577 Jy ! Clean residual min=-0.004401 max=0.005479 Jy/beam ! Clean residual mean=0.000005 rms=0.000963 Jy/beam ! Combined flux in latest and established models = 0.135577 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.135577 Jy ! Inverting map and beam ! Estimated beam: bmin=0.7814 mas, bmaj=2.149 mas, bpa=-10.29 degrees ! Estimated noise=0.257956 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00872534 Jy ! Component: 100 - total flux cleaned = 0.0144832 Jy ! Component: 150 - total flux cleaned = 0.0186432 Jy ! Component: 200 - total flux cleaned = 0.0220233 Jy ! Total flux subtracted in 200 components = 0.0220233 Jy ! Clean residual min=-0.002732 max=0.002987 Jy/beam ! Clean residual mean=0.000010 rms=0.000649 Jy/beam ! Combined flux in latest and established models = 0.1576 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 54 components and 0.1576 Jy ! Inverting map ! Added new window around map position (1.4, -8.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00310179 Jy ! Component: 100 - total flux cleaned = 0.00561094 Jy ! Component: 150 - total flux cleaned = 0.00771935 Jy ! Component: 200 - total flux cleaned = 0.00920504 Jy ! Total flux subtracted in 200 components = 0.00920504 Jy ! Clean residual min=-0.002076 max=0.002004 Jy/beam ! Clean residual mean=0.000005 rms=0.000472 Jy/beam ! Combined flux in latest and established models = 0.166805 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 85 components and 0.166805 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.34 mas, bmaj=8.306 mas, bpa=-3.204 degrees ! Estimated noise=0.32235 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00273586 Jy ! Component: 100 - total flux cleaned = 0.0047353 Jy ! Component: 150 - total flux cleaned = 0.00633175 Jy ! Component: 200 - total flux cleaned = 0.00765282 Jy ! Total flux subtracted in 200 components = 0.00765282 Jy ! Clean residual min=-0.001677 max=0.001592 Jy/beam ! Clean residual mean=0.000005 rms=0.000477 Jy/beam ! Combined flux in latest and established models = 0.174458 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00111064 Jy ! Component: 100 - total flux cleaned = 0.00205954 Jy ! Component: 150 - total flux cleaned = 0.00268806 Jy ! Component: 200 - total flux cleaned = 0.00313096 Jy ! Total flux subtracted in 200 components = 0.00313096 Jy ! Clean residual min=-0.001619 max=0.001336 Jy/beam ! Clean residual mean=0.000002 rms=0.000418 Jy/beam ! Combined flux in latest and established models = 0.177589 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 128 components and 0.177589 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.7814 mas, bmaj=2.149 mas, bpa=-10.29 degrees ! Estimated noise=0.257956 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000292203 Jy ! Component: 100 - total flux cleaned = 0.000348781 Jy ! Component: 150 - total flux cleaned = 0.000249533 Jy ! Component: 200 - total flux cleaned = 0.000295335 Jy ! Total flux subtracted in 200 components = 0.000295335 Jy ! Clean residual min=-0.001461 max=0.001439 Jy/beam ! Clean residual mean=0.000001 rms=0.000342 Jy/beam ! Combined flux in latest and established models = 0.177884 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 147 components and 0.177884 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.112915Jy sigma=1.165697 ! Fit after self-cal, rms=0.112810Jy sigma=1.165350 wmodel J2022-4038_X_a_map.mod ! Writing 147 model components to file: J2022-4038_X_a_map.mod wobs J2022-4038_X_a_uvs.fits ! Writing UV FITS file: J2022-4038_X_a_uvs.fits wwins J2022-4038_X_a_map.win ! wwins: Wrote 10 windows to J2022-4038_X_a_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000579362 Jy ! Component: 100 - total flux cleaned = -0.000770787 Jy ! Component: 150 - total flux cleaned = -0.00106747 Jy ! Component: 200 - total flux cleaned = -0.00130977 Jy ! Component: 250 - total flux cleaned = -0.0013945 Jy ! Component: 300 - total flux cleaned = -0.00147768 Jy ! Component: 350 - total flux cleaned = -0.00153874 Jy ! Component: 400 - total flux cleaned = -0.00163809 Jy ! Component: 450 - total flux cleaned = -0.00171534 Jy ! Component: 500 - total flux cleaned = -0.00181034 Jy ! Component: 550 - total flux cleaned = -0.001922 Jy ! Component: 600 - total flux cleaned = -0.0019401 Jy ! Component: 650 - total flux cleaned = -0.00197626 Jy ! Component: 700 - total flux cleaned = -0.00202983 Jy ! Component: 750 - total flux cleaned = -0.00211727 Jy ! Component: 800 - total flux cleaned = -0.00215169 Jy ! Component: 850 - total flux cleaned = -0.00220287 Jy ! Component: 900 - total flux cleaned = -0.00223663 Jy ! Component: 950 - total flux cleaned = -0.00228648 Jy ! Component: 1000 - total flux cleaned = -0.0023026 Jy ! Component: 1050 - total flux cleaned = -0.00233514 Jy ! Component: 1100 - total flux cleaned = -0.00241501 Jy ! Component: 1150 - total flux cleaned = -0.00241487 Jy ! Component: 1200 - total flux cleaned = -0.00243062 Jy ! Component: 1250 - total flux cleaned = -0.00243075 Jy ! Component: 1300 - total flux cleaned = -0.00247681 Jy ! Component: 1350 - total flux cleaned = -0.00246161 Jy ! Component: 1400 - total flux cleaned = -0.00247689 Jy ! Component: 1450 - total flux cleaned = -0.00249163 Jy ! Component: 1500 - total flux cleaned = -0.00246194 Jy ! Component: 1550 - total flux cleaned = -0.0024327 Jy ! Component: 1600 - total flux cleaned = -0.00244705 Jy ! Component: 1650 - total flux cleaned = -0.00240386 Jy ! Component: 1700 - total flux cleaned = -0.00237545 Jy ! Component: 1750 - total flux cleaned = -0.00238967 Jy ! Component: 1800 - total flux cleaned = -0.0023616 Jy ! Component: 1850 - total flux cleaned = -0.00237548 Jy ! Component: 1900 - total flux cleaned = -0.00233398 Jy ! Component: 1950 - total flux cleaned = -0.00233413 Jy ! Component: 2000 - total flux cleaned = -0.00229337 Jy ! Component: 2050 - total flux cleaned = -0.0023204 Jy ! Component: 2100 - total flux cleaned = -0.00236027 Jy ! Component: 2150 - total flux cleaned = -0.00237351 Jy ! Component: 2200 - total flux cleaned = -0.00232074 Jy ! Component: 2250 - total flux cleaned = -0.00232065 Jy ! Component: 2300 - total flux cleaned = -0.0023334 Jy ! Component: 2350 - total flux cleaned = -0.00235917 Jy ! Component: 2400 - total flux cleaned = -0.00235909 Jy ! Component: 2450 - total flux cleaned = -0.00232079 Jy ! Component: 2500 - total flux cleaned = -0.00232086 Jy ! Component: 2550 - total flux cleaned = -0.00234599 Jy ! Component: 2600 - total flux cleaned = -0.00230858 Jy ! Component: 2650 - total flux cleaned = -0.00229617 Jy ! Component: 2700 - total flux cleaned = -0.00230849 Jy ! Component: 2750 - total flux cleaned = -0.00236979 Jy ! Component: 2800 - total flux cleaned = -0.00233317 Jy ! Component: 2850 - total flux cleaned = -0.00232109 Jy ! Component: 2900 - total flux cleaned = -0.00230922 Jy ! Component: 2950 - total flux cleaned = -0.00227333 Jy ! Component: 3000 - total flux cleaned = -0.00227333 Jy ! Component: 3050 - total flux cleaned = -0.0023443 Jy ! Component: 3100 - total flux cleaned = -0.00226196 Jy ! Component: 3150 - total flux cleaned = -0.0023089 Jy ! Component: 3200 - total flux cleaned = -0.00229735 Jy ! Component: 3250 - total flux cleaned = -0.00234365 Jy ! Component: 3300 - total flux cleaned = -0.00238961 Jy ! Component: 3350 - total flux cleaned = -0.00241242 Jy ! Component: 3400 - total flux cleaned = -0.00245805 Jy ! Component: 3450 - total flux cleaned = -0.0024241 Jy ! Component: 3500 - total flux cleaned = -0.00241286 Jy ! Component: 3550 - total flux cleaned = -0.00240184 Jy ! Component: 3600 - total flux cleaned = -0.00248002 Jy ! Component: 3650 - total flux cleaned = -0.00243569 Jy ! Component: 3700 - total flux cleaned = -0.00250206 Jy ! Component: 3750 - total flux cleaned = -0.00253506 Jy ! Component: 3800 - total flux cleaned = -0.00257879 Jy ! Component: 3850 - total flux cleaned = -0.00258961 Jy ! Component: 3900 - total flux cleaned = -0.00256797 Jy ! Component: 3950 - total flux cleaned = -0.00256788 Jy ! Component: 4000 - total flux cleaned = -0.00261077 Jy ! Component: 4050 - total flux cleaned = -0.00254672 Jy ! Total flux subtracted in 4096 components = -0.00258925 Jy ! Clean residual min=-0.000737 max=0.000638 Jy/beam ! Clean residual mean=0.000001 rms=0.000186 Jy/beam ! Combined flux in latest and established models = 0.175295 Jy keep ! Adding 307 model components to the UV plane model. ! The established model now contains 453 components and 0.175295 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uvm//J2022-4038_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7814 x 2.149 at -10.29 degrees (North through East) ! Clean map min=-0.0010414 max=0.11313 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uvm//J2022-4038_X_a_map.fits wmodel /vlbi/uf001/uvm//J2022-4038_X_a_map.mod ! Writing 453 model components to file: /vlbi/uf001/uvm//J2022-4038_X_a_map.mod wobs /vlbi/uf001/uvm//J2022-4038_X_a_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uvm//J2022-4038_X_a_uvs.fits wwins /vlbi/uf001/uvm//J2022-4038_X_a_map.win ! wwins: Wrote 11 windows to /vlbi/uf001/uvm//J2022-4038_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.113128 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00018556 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.492083 0.492083 0.984166 1.96833 3.93666 7.87333 15.7467 31.4933 62.9866 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.113 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 609.653 quit ! Quitting program ! Log file /vlbi/uf001/uvm//J2022-4038_X_a_dfm.log closed on Sun Jan 13 22:28:29 2019