! Started logfile: /vlbi/uf001/uva//J2015+6554_X_dfm.log on Mon Jan 14 05:25:37 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uva//J2015+6554_X_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J2015+6554_X_uva.fits ! AN table 1: 42 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.959259 visibilities/baseline/integration-bin. ! Found source: J2015+6554 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 21756 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J2015+6554_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 68 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 68 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 68 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 68 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 68 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 68 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 68 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 68 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 68 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 68 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 68 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 68 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.059036Jy sigma=20.396971 ! Fit after self-cal, rms=0.700711Jy sigma=13.242613 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7863 mas, bmaj=0.9236 mas, bpa=9.252 degrees ! Estimated noise=0.53746 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.229348 Jy ! Component: 100 - total flux cleaned = 0.324267 Jy ! Total flux subtracted in 100 components = 0.324267 Jy ! Clean residual min=-0.018119 max=0.044385 Jy/beam ! Clean residual mean=0.000119 rms=0.004699 Jy/beam ! Combined flux in latest and established models = 0.324267 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.324267 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.160574Jy sigma=2.991987 ! Fit after self-cal, rms=0.159068Jy sigma=2.961101 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0542909 Jy ! Component: 100 - total flux cleaned = 0.0874809 Jy ! Total flux subtracted in 100 components = 0.0874809 Jy ! Clean residual min=-0.014940 max=0.020558 Jy/beam ! Clean residual mean=0.000097 rms=0.003160 Jy/beam ! Combined flux in latest and established models = 0.411748 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 18 components and 0.411747 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.134760Jy sigma=2.244480 ! Fit after self-cal, rms=0.134577Jy sigma=2.240902 ! Inverting map ! Added new window around map position (-1, 1). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0240134 Jy ! Component: 100 - total flux cleaned = 0.0407042 Jy ! Total flux subtracted in 100 components = 0.0407042 Jy ! Clean residual min=-0.012782 max=0.013201 Jy/beam ! Clean residual mean=0.000087 rms=0.002755 Jy/beam ! Combined flux in latest and established models = 0.452452 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 25 components and 0.452452 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.129891Jy sigma=2.033796 ! Fit after self-cal, rms=0.129801Jy sigma=2.030815 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9994 mas, bmaj=1.147 mas, bpa=10.31 degrees ! Estimated noise=0.278196 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0209347 Jy ! Component: 100 - total flux cleaned = 0.0337474 Jy ! Component: 150 - total flux cleaned = 0.0422516 Jy ! Component: 200 - total flux cleaned = 0.0481191 Jy ! Total flux subtracted in 200 components = 0.0481191 Jy ! Clean residual min=-0.016630 max=0.019093 Jy/beam ! Clean residual mean=0.000268 rms=0.004151 Jy/beam ! Combined flux in latest and established models = 0.500571 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 43 components and 0.500571 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.128734Jy sigma=1.898577 ! Fit after self-cal, rms=0.128611Jy sigma=1.894660 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9994 x 1.147 at 10.31 degrees (North through East) ! Clean map min=-0.015609 max=0.30958 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.00 HN 0.97 KP 0.99 ! LA 1.04 MK 1.01 NL 0.98 OV 0.92 ! PT 0.87 SC 1.08 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.99 HN 0.97 KP 1.02 ! LA 1.07 MK 0.99 NL 0.99 OV 0.91 ! PT 0.88 SC 1.11 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.99 HN 0.95 KP 1.01 ! LA 1.02 MK 0.99 NL 1.00 OV 0.92 ! PT 0.87 SC 1.10 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.98 HN 0.97 KP 1.02 ! LA 1.04 MK 1.00 NL 0.99 OV 0.92 ! PT 0.85 SC 1.12 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.99 HN 0.96 KP 1.02 ! LA 1.07 MK 0.98 NL 0.98 OV 0.93 ! PT 0.86 SC 1.13 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.00 HN 0.96 KP 1.01 ! LA 1.02 MK 1.01 NL 0.99 OV 0.91 ! PT 0.87 SC 1.10 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.01 HN 0.97 KP 1.02 ! LA 1.04 MK 0.99 NL 0.99 OV 0.92 ! PT 0.86 SC 1.08 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 0.99 HN 0.96 KP 1.02 ! LA 1.01 MK 1.01 NL 0.99 OV 0.91 ! PT 0.86 SC 1.12 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 0.99 HN 0.96 KP 1.02 ! LA 1.04 MK 0.98 NL 0.99 OV 0.92 ! PT 0.86 SC 1.10 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 0.99 HN 0.94 KP 1.02 ! LA 1.01 MK 1.00 NL 0.99 OV 0.91 ! PT 0.87 SC 1.15 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.01 HN 0.95 KP 1.02 ! LA 1.07 MK 0.97 NL 1.00 OV 0.91 ! PT 0.88 SC 1.10 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 0.97 HN 0.97 KP 1.02 ! LA 1.04 MK 0.98 NL 1.00 OV 0.92 ! PT 0.88 SC 1.08 ! ! ! Fit before self-cal, rms=0.128611Jy sigma=1.894660 ! Fit after self-cal, rms=0.123984Jy sigma=1.748557 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.014 mas, bmaj=1.159 mas, bpa=8.783 degrees ! Estimated noise=0.272464 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00897123 Jy ! Component: 100 - total flux cleaned = -0.0131048 Jy ! Component: 150 - total flux cleaned = -0.0152042 Jy ! Component: 200 - total flux cleaned = -0.0158857 Jy ! Total flux subtracted in 200 components = -0.0158857 Jy ! Clean residual min=-0.013661 max=0.015881 Jy/beam ! Clean residual mean=0.000232 rms=0.003574 Jy/beam ! Combined flux in latest and established models = 0.484685 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 55 components and 0.484685 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.122099Jy sigma=1.753815 ! Fit after self-cal, rms=0.122169Jy sigma=1.752647 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.122169Jy sigma=1.752647 ! Fit after self-cal, rms=0.173966Jy sigma=1.204127 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.009 mas, bmaj=1.159 mas, bpa=10.41 degrees ! Estimated noise=0.271139 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00327207 Jy ! Component: 100 - total flux cleaned = 0.0025471 Jy ! Component: 150 - total flux cleaned = 0.00237777 Jy ! Component: 200 - total flux cleaned = 0.00230844 Jy ! Total flux subtracted in 200 components = 0.00230844 Jy ! Clean residual min=-0.002718 max=0.003220 Jy/beam ! Clean residual mean=0.000005 rms=0.000598 Jy/beam ! Combined flux in latest and established models = 0.486993 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 62 components and 0.486993 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.173819Jy sigma=1.195122 ! Fit after self-cal, rms=0.174482Jy sigma=1.192754 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.2, -0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00168597 Jy ! Component: 100 - total flux cleaned = 0.00169165 Jy ! Component: 150 - total flux cleaned = 0.00155198 Jy ! Component: 200 - total flux cleaned = 0.00150105 Jy ! Total flux subtracted in 200 components = 0.00150105 Jy ! Clean residual min=-0.002546 max=0.002956 Jy/beam ! Clean residual mean=0.000004 rms=0.000553 Jy/beam ! Combined flux in latest and established models = 0.488495 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 73 components and 0.488494 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.174388Jy sigma=1.187972 ! Fit after self-cal, rms=0.174376Jy sigma=1.187056 ! Inverting map ! Added new window around map position (-5.4, -0.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00279472 Jy ! Component: 100 - total flux cleaned = 0.00321579 Jy ! Component: 150 - total flux cleaned = 0.00339131 Jy ! Component: 200 - total flux cleaned = 0.00344091 Jy ! Total flux subtracted in 200 components = 0.00344091 Jy ! Clean residual min=-0.002401 max=0.002556 Jy/beam ! Clean residual mean=0.000001 rms=0.000514 Jy/beam ! Combined flux in latest and established models = 0.491935 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 84 components and 0.491935 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.174281Jy sigma=1.183948 ! Fit after self-cal, rms=0.174274Jy sigma=1.183497 ! Inverting map ! Added new window around map position (-7, 8.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00194596 Jy ! Component: 100 - total flux cleaned = 0.00230233 Jy ! Component: 150 - total flux cleaned = 0.00246102 Jy ! Component: 200 - total flux cleaned = 0.00260459 Jy ! Total flux subtracted in 200 components = 0.00260459 Jy ! Clean residual min=-0.002097 max=0.002348 Jy/beam ! Clean residual mean=-0.000001 rms=0.000486 Jy/beam ! Combined flux in latest and established models = 0.49454 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 98 components and 0.49454 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.174225Jy sigma=1.181362 ! Fit after self-cal, rms=0.174220Jy sigma=1.181265 ! Inverting map ! Added new window around map position (0.6, 31.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00148767 Jy ! Component: 100 - total flux cleaned = 0.00165334 Jy ! Component: 150 - total flux cleaned = 0.00193723 Jy ! Component: 200 - total flux cleaned = 0.00219457 Jy ! Total flux subtracted in 200 components = 0.00219457 Jy ! Clean residual min=-0.002050 max=0.002129 Jy/beam ! Clean residual mean=-0.000003 rms=0.000461 Jy/beam ! Combined flux in latest and established models = 0.496735 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 118 components and 0.496735 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.174156Jy sigma=1.179220 ! Fit after self-cal, rms=0.174161Jy sigma=1.179070 ! Inverting map ! Added new window around map position (-32.6, -27.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00162843 Jy ! Component: 100 - total flux cleaned = 0.0021614 Jy ! Component: 150 - total flux cleaned = 0.00246191 Jy ! Component: 200 - total flux cleaned = 0.00270247 Jy ! Total flux subtracted in 200 components = 0.00270247 Jy ! Clean residual min=-0.001916 max=0.001967 Jy/beam ! Clean residual mean=-0.000004 rms=0.000441 Jy/beam ! Combined flux in latest and established models = 0.499437 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 132 components and 0.499437 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.174116Jy sigma=1.177502 ! Fit after self-cal, rms=0.174115Jy sigma=1.177436 ! Inverting map ! Added new window around map position (20.2, -23.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00158026 Jy ! Component: 100 - total flux cleaned = 0.00234703 Jy ! Component: 150 - total flux cleaned = 0.00277354 Jy ! Component: 200 - total flux cleaned = 0.00306654 Jy ! Total flux subtracted in 200 components = 0.00306654 Jy ! Clean residual min=-0.001915 max=0.001828 Jy/beam ! Clean residual mean=-0.000003 rms=0.000428 Jy/beam ! Combined flux in latest and established models = 0.502504 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 144 components and 0.502504 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.174078Jy sigma=1.176317 ! Fit after self-cal, rms=0.174083Jy sigma=1.176256 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.174083Jy sigma=1.176256 ! Fit after self-cal, rms=0.176749Jy sigma=1.173959 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.005 mas, bmaj=1.161 mas, bpa=10.7 degrees ! Estimated noise=0.270195 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00144334 Jy ! Component: 100 - total flux cleaned = 0.00171566 Jy ! Component: 150 - total flux cleaned = 0.00195289 Jy ! Component: 200 - total flux cleaned = 0.0022096 Jy ! Total flux subtracted in 200 components = 0.0022096 Jy ! Clean residual min=-0.001749 max=0.001754 Jy/beam ! Clean residual mean=0.000000 rms=0.000367 Jy/beam ! Combined flux in latest and established models = 0.504713 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 157 components and 0.504713 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.176719Jy sigma=1.172666 ! Fit after self-cal, rms=0.176735Jy sigma=1.172525 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-8.8, 11.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0016183 Jy ! Component: 100 - total flux cleaned = 0.00208597 Jy ! Component: 150 - total flux cleaned = 0.00240821 Jy ! Component: 200 - total flux cleaned = 0.00257463 Jy ! Total flux subtracted in 200 components = 0.00257463 Jy ! Clean residual min=-0.001613 max=0.001517 Jy/beam ! Clean residual mean=-0.000001 rms=0.000349 Jy/beam ! Combined flux in latest and established models = 0.507288 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 171 components and 0.507288 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.176700Jy sigma=1.171494 ! Fit after self-cal, rms=0.176700Jy sigma=1.171430 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.176700Jy sigma=1.171430 ! Fit after self-cal, rms=0.177191Jy sigma=1.171113 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.192 mas, bmaj=2.473 mas, bpa=35.61 degrees ! Estimated noise=0.371601 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00149733 Jy ! Component: 100 - total flux cleaned = 0.00220658 Jy ! Component: 150 - total flux cleaned = 0.00275288 Jy ! Component: 200 - total flux cleaned = 0.00327204 Jy ! Total flux subtracted in 200 components = 0.00327204 Jy ! Clean residual min=-0.001846 max=0.001614 Jy/beam ! Clean residual mean=0.000002 rms=0.000418 Jy/beam ! Combined flux in latest and established models = 0.51056 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 190 components and 0.51056 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.177168Jy sigma=1.170899 ! Fit after self-cal, rms=0.177175Jy sigma=1.170849 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000594891 Jy ! Component: 100 - total flux cleaned = 0.00104342 Jy ! Component: 150 - total flux cleaned = 0.00127779 Jy ! Component: 200 - total flux cleaned = 0.00145539 Jy ! Total flux subtracted in 200 components = 0.00145539 Jy ! Clean residual min=-0.001794 max=0.001650 Jy/beam ! Clean residual mean=0.000001 rms=0.000412 Jy/beam ! Combined flux in latest and established models = 0.512015 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 208 components and 0.512015 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.177167Jy sigma=1.170812 ! Fit after self-cal, rms=0.177169Jy sigma=1.170803 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=1.003 mas, bmaj=1.161 mas, bpa=10.7 degrees ! Estimated noise=0.270091 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.003 x 1.161 at 10.7 degrees (North through East) ! Clean map min=-0.0013147 max=0.29902 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7927 mas, bmaj=0.9317 mas, bpa=9.33 degrees ! Estimated noise=0.522752 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.22433 Jy ! Component: 100 - total flux cleaned = 0.320042 Jy ! Component: 150 - total flux cleaned = 0.370955 Jy ! Component: 200 - total flux cleaned = 0.403125 Jy ! Total flux subtracted in 200 components = 0.403125 Jy ! Clean residual min=-0.006572 max=0.017672 Jy/beam ! Clean residual mean=0.000037 rms=0.001823 Jy/beam ! Combined flux in latest and established models = 0.403125 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.403125 Jy ! Inverting map and beam ! Estimated beam: bmin=1.003 mas, bmaj=1.161 mas, bpa=10.7 degrees ! Estimated noise=0.270091 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0348943 Jy ! Component: 100 - total flux cleaned = 0.054696 Jy ! Component: 150 - total flux cleaned = 0.0668107 Jy ! Component: 200 - total flux cleaned = 0.0746276 Jy ! Total flux subtracted in 200 components = 0.0746276 Jy ! Clean residual min=-0.002520 max=0.004218 Jy/beam ! Clean residual mean=0.000025 rms=0.000663 Jy/beam ! Combined flux in latest and established models = 0.477753 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 48 components and 0.477753 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00529267 Jy ! Component: 100 - total flux cleaned = 0.00921524 Jy ! Component: 150 - total flux cleaned = 0.0124967 Jy ! Component: 200 - total flux cleaned = 0.0153189 Jy ! Total flux subtracted in 200 components = 0.0153189 Jy ! Clean residual min=-0.002032 max=0.002476 Jy/beam ! Clean residual mean=0.000010 rms=0.000460 Jy/beam ! Combined flux in latest and established models = 0.493072 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 71 components and 0.493072 Jy ! Inverting map ! Added new window around map position (2.2, -12.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00264259 Jy ! Component: 100 - total flux cleaned = 0.00477763 Jy ! Component: 150 - total flux cleaned = 0.00653434 Jy ! Component: 200 - total flux cleaned = 0.00812553 Jy ! Total flux subtracted in 200 components = 0.00812553 Jy ! Clean residual min=-0.001784 max=0.001997 Jy/beam ! Clean residual mean=0.000004 rms=0.000397 Jy/beam ! Combined flux in latest and established models = 0.501197 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 89 components and 0.501197 Jy ! Inverting map ! Added new window around map position (-2, 2.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00184502 Jy ! Component: 100 - total flux cleaned = 0.00280041 Jy ! Component: 150 - total flux cleaned = 0.00362407 Jy ! Component: 200 - total flux cleaned = 0.00439464 Jy ! Total flux subtracted in 200 components = 0.00439464 Jy ! Clean residual min=-0.001706 max=0.001713 Jy/beam ! Clean residual mean=0.000001 rms=0.000366 Jy/beam ! Combined flux in latest and established models = 0.505592 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 105 components and 0.505592 Jy ! Inverting map ! Added new window around map position (19.4, 10). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00057528 Jy ! Component: 100 - total flux cleaned = 0.00109165 Jy ! Component: 150 - total flux cleaned = 0.00161941 Jy ! Component: 200 - total flux cleaned = 0.00207222 Jy ! Total flux subtracted in 200 components = 0.00207222 Jy ! Clean residual min=-0.001605 max=0.001588 Jy/beam ! Clean residual mean=0.000001 rms=0.000348 Jy/beam ! Combined flux in latest and established models = 0.507664 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 124 components and 0.507664 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.192 mas, bmaj=2.473 mas, bpa=35.61 degrees ! Estimated noise=0.371601 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00135853 Jy ! Component: 100 - total flux cleaned = 0.00236249 Jy ! Component: 150 - total flux cleaned = 0.00304915 Jy ! Component: 200 - total flux cleaned = 0.00353667 Jy ! Total flux subtracted in 200 components = 0.00353667 Jy ! Clean residual min=-0.001878 max=0.001696 Jy/beam ! Clean residual mean=0.000001 rms=0.000420 Jy/beam ! Combined flux in latest and established models = 0.511201 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000238806 Jy ! Component: 100 - total flux cleaned = 0.000463909 Jy ! Component: 150 - total flux cleaned = 0.000675995 Jy ! Component: 200 - total flux cleaned = 0.00092333 Jy ! Total flux subtracted in 200 components = 0.00092333 Jy ! Clean residual min=-0.001882 max=0.001659 Jy/beam ! Clean residual mean=0.000000 rms=0.000412 Jy/beam ! Combined flux in latest and established models = 0.512124 Jy ! Adding 59 model components to the UV plane model. ! The established model now contains 167 components and 0.512125 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.003 mas, bmaj=1.161 mas, bpa=10.7 degrees ! Estimated noise=0.270091 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.66826e-05 Jy ! Component: 100 - total flux cleaned = 4.47108e-07 Jy ! Component: 150 - total flux cleaned = 3.65473e-05 Jy ! Component: 200 - total flux cleaned = 7.03572e-05 Jy ! Total flux subtracted in 200 components = 7.03572e-05 Jy ! Clean residual min=-0.001456 max=0.001556 Jy/beam ! Clean residual mean=-0.000000 rms=0.000327 Jy/beam ! Combined flux in latest and established models = 0.512195 Jy selfcal ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 186 components and 0.512195 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.177132Jy sigma=1.170593 ! Fit after self-cal, rms=0.177118Jy sigma=1.170059 wmodel J2015+6554_X_map.mod ! Writing 186 model components to file: J2015+6554_X_map.mod wobs J2015+6554_X_uvs.fits ! Writing UV FITS file: J2015+6554_X_uvs.fits wwins J2015+6554_X_map.win ! wwins: Wrote 12 windows to J2015+6554_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000131251 Jy ! Component: 100 - total flux cleaned = 6.63539e-05 Jy ! Component: 150 - total flux cleaned = 0.00030055 Jy ! Component: 200 - total flux cleaned = 0.000390939 Jy ! Component: 250 - total flux cleaned = 0.000500841 Jy ! Component: 300 - total flux cleaned = 0.000672573 Jy ! Component: 350 - total flux cleaned = 0.000756883 Jy ! Component: 400 - total flux cleaned = 0.000860651 Jy ! Component: 450 - total flux cleaned = 0.00102367 Jy ! Component: 500 - total flux cleaned = 0.00106364 Jy ! Component: 550 - total flux cleaned = 0.00112286 Jy ! Component: 600 - total flux cleaned = 0.0011424 Jy ! Component: 650 - total flux cleaned = 0.00116177 Jy ! Component: 700 - total flux cleaned = 0.00121962 Jy ! Component: 750 - total flux cleaned = 0.00125755 Jy ! Component: 800 - total flux cleaned = 0.0012952 Jy ! Component: 850 - total flux cleaned = 0.00136954 Jy ! Component: 900 - total flux cleaned = 0.00133298 Jy ! Component: 950 - total flux cleaned = 0.00138741 Jy ! Component: 1000 - total flux cleaned = 0.00140538 Jy ! Component: 1050 - total flux cleaned = 0.00144135 Jy ! Component: 1100 - total flux cleaned = 0.00147702 Jy ! Component: 1150 - total flux cleaned = 0.00156498 Jy ! Component: 1200 - total flux cleaned = 0.00154754 Jy ! Component: 1250 - total flux cleaned = 0.00158242 Jy ! Component: 1300 - total flux cleaned = 0.00166867 Jy ! Component: 1350 - total flux cleaned = 0.00166882 Jy ! Component: 1400 - total flux cleaned = 0.00175376 Jy ! Component: 1450 - total flux cleaned = 0.00185481 Jy ! Component: 1500 - total flux cleaned = 0.0018882 Jy ! Component: 1550 - total flux cleaned = 0.001905 Jy ! Component: 1600 - total flux cleaned = 0.00200404 Jy ! Component: 1650 - total flux cleaned = 0.00202048 Jy ! Component: 1700 - total flux cleaned = 0.0020367 Jy ! Component: 1750 - total flux cleaned = 0.00205293 Jy ! Component: 1800 - total flux cleaned = 0.00211733 Jy ! Component: 1850 - total flux cleaned = 0.00218114 Jy ! Component: 1900 - total flux cleaned = 0.0022922 Jy ! Component: 1950 - total flux cleaned = 0.00237088 Jy ! Component: 2000 - total flux cleaned = 0.00238661 Jy ! Component: 2050 - total flux cleaned = 0.00243342 Jy ! Component: 2100 - total flux cleaned = 0.00247986 Jy ! Component: 2150 - total flux cleaned = 0.002526 Jy ! Component: 2200 - total flux cleaned = 0.00254116 Jy ! Component: 2250 - total flux cleaned = 0.00258685 Jy ! Component: 2300 - total flux cleaned = 0.00267741 Jy ! Component: 2350 - total flux cleaned = 0.00272263 Jy ! Component: 2400 - total flux cleaned = 0.00278246 Jy ! Component: 2450 - total flux cleaned = 0.00284178 Jy ! Component: 2500 - total flux cleaned = 0.00288604 Jy ! Component: 2550 - total flux cleaned = 0.00300357 Jy ! Component: 2600 - total flux cleaned = 0.00301828 Jy ! Component: 2650 - total flux cleaned = 0.00301822 Jy ! Component: 2700 - total flux cleaned = 0.00303285 Jy ! Component: 2750 - total flux cleaned = 0.00307592 Jy ! Component: 2800 - total flux cleaned = 0.00314746 Jy ! Component: 2850 - total flux cleaned = 0.00321843 Jy ! Component: 2900 - total flux cleaned = 0.00324669 Jy ! Component: 2950 - total flux cleaned = 0.00327487 Jy ! Component: 3000 - total flux cleaned = 0.00330285 Jy ! Component: 3050 - total flux cleaned = 0.00335849 Jy ! Component: 3100 - total flux cleaned = 0.00338616 Jy ! Component: 3150 - total flux cleaned = 0.00341381 Jy ! Component: 3200 - total flux cleaned = 0.00344121 Jy ! Component: 3250 - total flux cleaned = 0.00350966 Jy ! Component: 3300 - total flux cleaned = 0.00348239 Jy ! Component: 3350 - total flux cleaned = 0.00349596 Jy ! Component: 3400 - total flux cleaned = 0.00354995 Jy ! Component: 3450 - total flux cleaned = 0.00363061 Jy ! Component: 3500 - total flux cleaned = 0.00363057 Jy ! Component: 3550 - total flux cleaned = 0.0037239 Jy ! Component: 3600 - total flux cleaned = 0.00368405 Jy ! Component: 3650 - total flux cleaned = 0.00376344 Jy ! Component: 3700 - total flux cleaned = 0.0038292 Jy ! Component: 3750 - total flux cleaned = 0.00382922 Jy ! Component: 3800 - total flux cleaned = 0.00386841 Jy ! Component: 3850 - total flux cleaned = 0.00388133 Jy ! Component: 3900 - total flux cleaned = 0.00394617 Jy ! Component: 3950 - total flux cleaned = 0.00401068 Jy ! Component: 4000 - total flux cleaned = 0.00404934 Jy ! Component: 4050 - total flux cleaned = 0.00403659 Jy ! Total flux subtracted in 4096 components = 0.00413857 Jy ! Clean residual min=-0.000817 max=0.000754 Jy/beam ! Clean residual mean=-0.000001 rms=0.000213 Jy/beam ! Combined flux in latest and established models = 0.516334 Jy keep ! Adding 344 model components to the UV plane model. ! The established model now contains 530 components and 0.516334 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J2015+6554_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.003 x 1.161 at 10.7 degrees (North through East) ! Clean map min=-0.0011835 max=0.29917 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J2015+6554_X_map.fits wmodel /vlbi/uf001/uva//J2015+6554_X_map.mod ! Writing 530 model components to file: /vlbi/uf001/uva//J2015+6554_X_map.mod wobs /vlbi/uf001/uva//J2015+6554_X_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J2015+6554_X_uvs.fits wwins /vlbi/uf001/uva//J2015+6554_X_map.win ! wwins: Wrote 13 windows to /vlbi/uf001/uva//J2015+6554_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.29917 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000212163 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.212752 0.212752 0.425503 0.851006 1.70201 3.40402 6.80805 13.6161 27.2322 54.4644 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.299 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1410.09 quit ! Quitting program ! Log file /vlbi/uf001/uva//J2015+6554_X_dfm.log closed on Mon Jan 14 05:25:43 2019