! Started logfile: /vlbi/uf001/uva//J2015+3710_X_dfm.log on Mon Jan 14 05:25:14 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uva//J2015+3710_X_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J2015+3710_X_uva.fits ! AN table 1: 42 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.932275 visibilities/baseline/integration-bin. ! Found source: J2015+3710 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 21144 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J2015+3710_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 78 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 78 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 78 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 78 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 78 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 78 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 78 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 78 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 78 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 78 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 78 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 78 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=2.326674Jy sigma=21.632775 ! Fit after self-cal, rms=1.167975Jy sigma=10.048895 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6738 mas, bmaj=1.154 mas, bpa=-8.756 degrees ! Estimated noise=0.805687 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.29188 Jy ! Component: 100 - total flux cleaned = 1.74526 Jy ! Total flux subtracted in 100 components = 1.74526 Jy ! Clean residual min=-0.073335 max=0.217184 Jy/beam ! Clean residual mean=-0.000014 rms=0.016824 Jy/beam ! Combined flux in latest and established models = 1.74526 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 1.74526 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.600474Jy sigma=5.060342 ! Fit after self-cal, rms=0.599947Jy sigma=5.053609 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.258261 Jy ! Component: 100 - total flux cleaned = 0.419871 Jy ! Total flux subtracted in 100 components = 0.419871 Jy ! Clean residual min=-0.048339 max=0.085287 Jy/beam ! Clean residual mean=-0.000013 rms=0.009655 Jy/beam ! Combined flux in latest and established models = 2.16513 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 19 components and 2.16513 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.347254Jy sigma=2.918031 ! Fit after self-cal, rms=0.346948Jy sigma=2.912683 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.106924 Jy ! Component: 100 - total flux cleaned = 0.180178 Jy ! Total flux subtracted in 100 components = 0.180178 Jy ! Clean residual min=-0.037545 max=0.052724 Jy/beam ! Clean residual mean=-0.000013 rms=0.007643 Jy/beam ! Combined flux in latest and established models = 2.3453 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 27 components and 2.3453 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.267906Jy sigma=2.298352 ! Fit after self-cal, rms=0.267824Jy sigma=2.296670 ! Inverting map ! Added new window around map position (-1.4, -2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0591272 Jy ! Component: 100 - total flux cleaned = 0.104612 Jy ! Total flux subtracted in 100 components = 0.104612 Jy ! Clean residual min=-0.034549 max=0.042012 Jy/beam ! Clean residual mean=-0.000012 rms=0.006833 Jy/beam ! Combined flux in latest and established models = 2.44992 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 34 components and 2.44992 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.234333Jy sigma=2.052513 ! Fit after self-cal, rms=0.234175Jy sigma=2.047109 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8139 mas, bmaj=1.386 mas, bpa=-8.727 degrees ! Estimated noise=0.549617 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.4, -1.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0687308 Jy ! Component: 100 - total flux cleaned = 0.119926 Jy ! Component: 150 - total flux cleaned = 0.160102 Jy ! Component: 200 - total flux cleaned = 0.1926 Jy ! Total flux subtracted in 200 components = 0.1926 Jy ! Clean residual min=-0.031855 max=0.043122 Jy/beam ! Clean residual mean=-0.000065 rms=0.007692 Jy/beam ! Combined flux in latest and established models = 2.64252 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 69 components and 2.64252 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.192882Jy sigma=1.770214 ! Fit after self-cal, rms=0.192329Jy sigma=1.761730 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8139 x 1.386 at -8.727 degrees (North through East) ! Clean map min=-0.028793 max=1.8038 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.99 HN 1.00 KP 1.02 ! LA 0.98 MK 1.05 NL 1.09 OV 0.91 ! PT 0.91 SC 1.00 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.99 HN 0.99 KP 1.02 ! LA 0.98 MK 1.05 NL 1.10 OV 0.91 ! PT 0.91 SC 0.99 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.00 HN 0.99 KP 1.02 ! LA 0.99 MK 1.05 NL 1.08 OV 0.90 ! PT 0.91 SC 0.98 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.99 HN 0.98 KP 1.03 ! LA 0.98 MK 1.04 NL 1.08 OV 0.92 ! PT 0.91 SC 0.99 ! ! ! Correcting IF 5. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.00 HN 0.98 KP 1.03 ! LA 0.98 MK 1.04 NL 1.10 OV 0.91 ! PT 0.91 SC 0.97 ! ! ! Correcting IF 6. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.00 HN 0.98 KP 1.03 ! LA 0.99 MK 1.04 NL 1.10 OV 0.91 ! PT 0.91 SC 0.97 ! ! ! Correcting IF 7. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.00 HN 0.98 KP 1.03 ! LA 0.99 MK 1.02 NL 1.10 OV 0.91 ! PT 0.92 SC 0.97 ! ! ! Correcting IF 8. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.00 HN 0.98 KP 1.03 ! LA 0.99 MK 1.03 NL 1.09 OV 0.91 ! PT 0.92 SC 0.97 ! ! ! Correcting IF 9. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.01 HN 0.98 KP 1.03 ! LA 0.99 MK 1.01 NL 1.10 OV 0.91 ! PT 0.92 SC 0.97 ! ! ! Correcting IF 10. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.00 HN 0.99 KP 1.03 ! LA 0.99 MK 1.00 NL 1.10 OV 0.91 ! PT 0.91 SC 0.97 ! ! ! Correcting IF 11. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.00 HN 0.99 KP 1.03 ! LA 0.99 MK 1.01 NL 1.09 OV 0.91 ! PT 0.93 SC 0.96 ! ! ! Correcting IF 12. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.00 HN 0.98 KP 1.03 ! LA 0.99 MK 1.00 NL 1.10 OV 0.91 ! PT 0.92 SC 0.96 ! ! ! Fit before self-cal, rms=0.192329Jy sigma=1.761730 ! Fit after self-cal, rms=0.094217Jy sigma=0.894461 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8179 mas, bmaj=1.397 mas, bpa=-7.862 degrees ! Estimated noise=0.549978 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.8, -4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0118313 Jy ! Component: 100 - total flux cleaned = 0.0161348 Jy ! Component: 150 - total flux cleaned = 0.0184808 Jy ! Component: 200 - total flux cleaned = 0.0209054 Jy ! Total flux subtracted in 200 components = 0.0209054 Jy ! Clean residual min=-0.009973 max=0.012810 Jy/beam ! Clean residual mean=0.000001 rms=0.002272 Jy/beam ! Combined flux in latest and established models = 2.66342 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 92 components and 2.66342 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084213Jy sigma=0.797302 ! Fit after self-cal, rms=0.083215Jy sigma=0.791071 ! Inverting map ! Added new window around map position (-10.2, 5.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00880574 Jy ! Component: 100 - total flux cleaned = 0.0117367 Jy ! Component: 150 - total flux cleaned = 0.0146233 Jy ! Component: 200 - total flux cleaned = 0.0162278 Jy ! Total flux subtracted in 200 components = 0.0162278 Jy ! Clean residual min=-0.008827 max=0.009613 Jy/beam ! Clean residual mean=0.000005 rms=0.001997 Jy/beam ! Combined flux in latest and established models = 2.67965 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 102 components and 2.67965 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.079620Jy sigma=0.753564 ! Fit after self-cal, rms=0.079335Jy sigma=0.751893 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.079335Jy sigma=0.751893 ! Fit after self-cal, rms=0.073365Jy sigma=0.707454 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8168 mas, bmaj=1.397 mas, bpa=-8.036 degrees ! Estimated noise=0.549092 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00195368 Jy ! Component: 100 - total flux cleaned = 0.00410188 Jy ! Component: 150 - total flux cleaned = 0.00621985 Jy ! Component: 200 - total flux cleaned = 0.00738544 Jy ! Total flux subtracted in 200 components = 0.00738544 Jy ! Clean residual min=-0.007325 max=0.007023 Jy/beam ! Clean residual mean=0.000001 rms=0.001476 Jy/beam ! Combined flux in latest and established models = 2.68703 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 118 components and 2.68703 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070862Jy sigma=0.682361 ! Fit after self-cal, rms=0.070557Jy sigma=0.680720 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000716952 Jy ! Component: 100 - total flux cleaned = 0.00112658 Jy ! Component: 150 - total flux cleaned = 0.00204763 Jy ! Component: 200 - total flux cleaned = 0.00307578 Jy ! Total flux subtracted in 200 components = 0.00307578 Jy ! Clean residual min=-0.007022 max=0.006575 Jy/beam ! Clean residual mean=0.000002 rms=0.001374 Jy/beam ! Combined flux in latest and established models = 2.69011 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 127 components and 2.69011 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069498Jy sigma=0.670263 ! Fit after self-cal, rms=0.069379Jy sigma=0.669717 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069379Jy sigma=0.669717 ! Fit after self-cal, rms=0.068117Jy sigma=0.664297 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8159 mas, bmaj=1.397 mas, bpa=-8.049 degrees ! Estimated noise=0.548897 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00089739 Jy ! Component: 100 - total flux cleaned = 0.00211978 Jy ! Component: 150 - total flux cleaned = 0.00300581 Jy ! Component: 200 - total flux cleaned = 0.00382241 Jy ! Total flux subtracted in 200 components = 0.00382241 Jy ! Clean residual min=-0.006561 max=0.006269 Jy/beam ! Clean residual mean=-0.000000 rms=0.001215 Jy/beam ! Combined flux in latest and established models = 2.69393 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 129 components and 2.69393 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067016Jy sigma=0.653190 ! Fit after self-cal, rms=0.066884Jy sigma=0.652491 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000698735 Jy ! Component: 100 - total flux cleaned = 0.000853681 Jy ! Component: 150 - total flux cleaned = 0.00125367 Jy ! Component: 200 - total flux cleaned = 0.00150283 Jy ! Total flux subtracted in 200 components = 0.00150283 Jy ! Clean residual min=-0.006361 max=0.005961 Jy/beam ! Clean residual mean=0.000000 rms=0.001158 Jy/beam ! Combined flux in latest and established models = 2.69544 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 138 components and 2.69544 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066346Jy sigma=0.647122 ! Fit after self-cal, rms=0.066286Jy sigma=0.646860 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066286Jy sigma=0.646860 ! Fit after self-cal, rms=0.065688Jy sigma=0.644418 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.024 mas, bmaj=2.39 mas, bpa=-5.985 degrees ! Estimated noise=0.850783 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00424723 Jy ! Component: 100 - total flux cleaned = 0.00616602 Jy ! Component: 150 - total flux cleaned = 0.00679121 Jy ! Component: 200 - total flux cleaned = 0.00705943 Jy ! Total flux subtracted in 200 components = 0.00705943 Jy ! Clean residual min=-0.005773 max=0.006286 Jy/beam ! Clean residual mean=0.000002 rms=0.001493 Jy/beam ! Combined flux in latest and established models = 2.70249 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 150 components and 2.70249 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065149Jy sigma=0.643370 ! Fit after self-cal, rms=0.065097Jy sigma=0.642644 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00122746 Jy ! Component: 100 - total flux cleaned = 0.00166549 Jy ! Component: 150 - total flux cleaned = 0.00185573 Jy ! Component: 200 - total flux cleaned = 0.00194398 Jy ! Total flux subtracted in 200 components = 0.00194398 Jy ! Clean residual min=-0.005572 max=0.006106 Jy/beam ! Clean residual mean=0.000004 rms=0.001451 Jy/beam ! Combined flux in latest and established models = 2.70444 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 153 components and 2.70444 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064974Jy sigma=0.643345 ! Fit after self-cal, rms=0.064978Jy sigma=0.643220 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8153 mas, bmaj=1.397 mas, bpa=-8.051 degrees ! Estimated noise=0.548873 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8153 x 1.397 at -8.051 degrees (North through East) ! Clean map min=-0.0053901 max=1.7979 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064978Jy sigma=0.643220 ! Fit after self-cal, rms=0.058450Jy sigma=0.568427 ! Inverting map and beam ! Estimated beam: bmin=0.815 mas, bmaj=1.398 mas, bpa=-8.15 degrees ! Estimated noise=0.549188 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000851665 Jy ! Component: 100 - total flux cleaned = 0.000718343 Jy ! Component: 150 - total flux cleaned = 0.000854032 Jy ! Component: 200 - total flux cleaned = 0.00121338 Jy ! Total flux subtracted in 200 components = 0.00121338 Jy ! Clean residual min=-0.005815 max=0.005504 Jy/beam ! Clean residual mean=0.000000 rms=0.000993 Jy/beam ! Combined flux in latest and established models = 2.70565 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 158 components and 2.70565 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057920Jy sigma=0.561205 ! Fit after self-cal, rms=0.057876Jy sigma=0.560964 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000272107 Jy ! Component: 100 - total flux cleaned = 0.000266833 Jy ! Component: 150 - total flux cleaned = 0.000170369 Jy ! Component: 200 - total flux cleaned = 0.000170745 Jy ! Total flux subtracted in 200 components = 0.000170745 Jy ! Clean residual min=-0.005657 max=0.005181 Jy/beam ! Clean residual mean=0.000000 rms=0.000962 Jy/beam ! Combined flux in latest and established models = 2.70582 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 167 components and 2.70582 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057613Jy sigma=0.557019 ! Fit after self-cal, rms=0.057586Jy sigma=0.556894 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057586Jy sigma=0.556894 ! Fit after self-cal, rms=0.057294Jy sigma=0.555799 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6731 mas, bmaj=1.16 mas, bpa=-8.46 degrees ! Estimated noise=0.807395 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.293 Jy ! Component: 100 - total flux cleaned = 1.74599 Jy ! Component: 150 - total flux cleaned = 2.00301 Jy ! Component: 200 - total flux cleaned = 2.16465 Jy ! Total flux subtracted in 200 components = 2.16465 Jy ! Clean residual min=-0.029773 max=0.085313 Jy/beam ! Clean residual mean=-0.000011 rms=0.007493 Jy/beam ! Combined flux in latest and established models = 2.16465 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 2.16465 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8144 mas, bmaj=1.397 mas, bpa=-8.139 degrees ! Estimated noise=0.549205 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.154695 Jy ! Component: 100 - total flux cleaned = 0.245639 Jy ! Component: 150 - total flux cleaned = 0.304739 Jy ! Component: 200 - total flux cleaned = 0.347185 Jy ! Total flux subtracted in 200 components = 0.347185 Jy ! Clean residual min=-0.012520 max=0.025159 Jy/beam ! Clean residual mean=-0.000044 rms=0.003327 Jy/beam ! Combined flux in latest and established models = 2.51183 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 45 components and 2.51183 Jy ! Inverting map ! Added new window around map position (0.8, 0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0329595 Jy ! Component: 100 - total flux cleaned = 0.0591977 Jy ! Component: 150 - total flux cleaned = 0.0803008 Jy ! Component: 200 - total flux cleaned = 0.0977563 Jy ! Total flux subtracted in 200 components = 0.0977563 Jy ! Clean residual min=-0.007374 max=0.011083 Jy/beam ! Clean residual mean=-0.000022 rms=0.001827 Jy/beam ! Combined flux in latest and established models = 2.60959 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 67 components and 2.60959 Jy ! Inverting map ! Added new window around map position (-2.8, -6.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0147384 Jy ! Component: 100 - total flux cleaned = 0.0271685 Jy ! Component: 150 - total flux cleaned = 0.0377637 Jy ! Component: 200 - total flux cleaned = 0.0469756 Jy ! Total flux subtracted in 200 components = 0.0469756 Jy ! Clean residual min=-0.005899 max=0.008449 Jy/beam ! Clean residual mean=-0.000012 rms=0.001292 Jy/beam ! Combined flux in latest and established models = 2.65656 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 84 components and 2.65656 Jy ! Inverting map ! Added new window around map position (-1, -6.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00921434 Jy ! Component: 100 - total flux cleaned = 0.0165254 Jy ! Component: 150 - total flux cleaned = 0.022996 Jy ! Component: 200 - total flux cleaned = 0.0287731 Jy ! Total flux subtracted in 200 components = 0.0287731 Jy ! Clean residual min=-0.005264 max=0.005187 Jy/beam ! Clean residual mean=-0.000006 rms=0.001055 Jy/beam ! Combined flux in latest and established models = 2.68534 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 97 components and 2.68534 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.023 mas, bmaj=2.39 mas, bpa=-6.055 degrees ! Estimated noise=0.852368 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00793814 Jy ! Component: 100 - total flux cleaned = 0.0132604 Jy ! Component: 150 - total flux cleaned = 0.016517 Jy ! Component: 200 - total flux cleaned = 0.0186371 Jy ! Total flux subtracted in 200 components = 0.0186371 Jy ! Clean residual min=-0.004921 max=0.005256 Jy/beam ! Clean residual mean=-0.000004 rms=0.001239 Jy/beam ! Combined flux in latest and established models = 2.70398 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00181029 Jy ! Component: 100 - total flux cleaned = 0.00346985 Jy ! Component: 150 - total flux cleaned = 0.00476024 Jy ! Component: 200 - total flux cleaned = 0.00568198 Jy ! Total flux subtracted in 200 components = 0.00568198 Jy ! Clean residual min=-0.004450 max=0.005039 Jy/beam ! Clean residual mean=-0.000000 rms=0.001186 Jy/beam ! Combined flux in latest and established models = 2.70966 Jy ! Adding 81 model components to the UV plane model. ! The established model now contains 166 components and 2.70966 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8144 mas, bmaj=1.397 mas, bpa=-8.139 degrees ! Estimated noise=0.549205 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000778816 Jy ! Component: 100 - total flux cleaned = 0.00136942 Jy ! Component: 150 - total flux cleaned = 0.00177908 Jy ! Component: 200 - total flux cleaned = 0.00241858 Jy ! Total flux subtracted in 200 components = 0.00241858 Jy ! Clean residual min=-0.004522 max=0.004976 Jy/beam ! Clean residual mean=0.000000 rms=0.000908 Jy/beam ! Combined flux in latest and established models = 2.71208 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 179 components and 2.71208 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056892Jy sigma=0.555980 ! Fit after self-cal, rms=0.056716Jy sigma=0.553427 wmodel J2015+3710_X_map.mod ! Writing 179 model components to file: J2015+3710_X_map.mod wobs J2015+3710_X_uvs.fits ! Writing UV FITS file: J2015+3710_X_uvs.fits wwins J2015+3710_X_map.win ! wwins: Wrote 8 windows to J2015+3710_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00184861 Jy ! Component: 100 - total flux cleaned = 0.00297021 Jy ! Component: 150 - total flux cleaned = 0.0036839 Jy ! Component: 200 - total flux cleaned = 0.00430752 Jy ! Component: 250 - total flux cleaned = 0.00511416 Jy ! Component: 300 - total flux cleaned = 0.00583239 Jy ! Component: 350 - total flux cleaned = 0.00621514 Jy ! Component: 400 - total flux cleaned = 0.00677723 Jy ! Component: 450 - total flux cleaned = 0.00745039 Jy ! Component: 500 - total flux cleaned = 0.0081083 Jy ! Component: 550 - total flux cleaned = 0.00869454 Jy ! Component: 600 - total flux cleaned = 0.00904008 Jy ! Component: 650 - total flux cleaned = 0.00955008 Jy ! Component: 700 - total flux cleaned = 0.0100507 Jy ! Component: 750 - total flux cleaned = 0.0105419 Jy ! Component: 800 - total flux cleaned = 0.0110235 Jy ! Component: 850 - total flux cleaned = 0.0113396 Jy ! Component: 900 - total flux cleaned = 0.0116502 Jy ! Component: 950 - total flux cleaned = 0.0120067 Jy ! Component: 1000 - total flux cleaned = 0.0123082 Jy ! Component: 1050 - total flux cleaned = 0.0126545 Jy ! Component: 1100 - total flux cleaned = 0.0127528 Jy ! Component: 1150 - total flux cleaned = 0.0131853 Jy ! Component: 1200 - total flux cleaned = 0.0134222 Jy ! Component: 1250 - total flux cleaned = 0.0136553 Jy ! Component: 1300 - total flux cleaned = 0.013932 Jy ! Component: 1350 - total flux cleaned = 0.0140687 Jy ! Component: 1400 - total flux cleaned = 0.014517 Jy ! Component: 1450 - total flux cleaned = 0.0146058 Jy ! Component: 1500 - total flux cleaned = 0.0149996 Jy ! Component: 1550 - total flux cleaned = 0.0151284 Jy ! Component: 1600 - total flux cleaned = 0.0152567 Jy ! Component: 1650 - total flux cleaned = 0.0153415 Jy ! Component: 1700 - total flux cleaned = 0.0156751 Jy ! Component: 1750 - total flux cleaned = 0.0158799 Jy ! Component: 1800 - total flux cleaned = 0.0157984 Jy ! Component: 1850 - total flux cleaned = 0.0160402 Jy ! Component: 1900 - total flux cleaned = 0.0162391 Jy ! Component: 1950 - total flux cleaned = 0.0163179 Jy ! Component: 2000 - total flux cleaned = 0.0163183 Jy ! Component: 2050 - total flux cleaned = 0.0165105 Jy ! Component: 2100 - total flux cleaned = 0.0165102 Jy ! Component: 2150 - total flux cleaned = 0.0165861 Jy ! Component: 2200 - total flux cleaned = 0.0166981 Jy ! Component: 2250 - total flux cleaned = 0.0168089 Jy ! Component: 2300 - total flux cleaned = 0.0168823 Jy ! Component: 2350 - total flux cleaned = 0.0168827 Jy ! Component: 2400 - total flux cleaned = 0.0169549 Jy ! Component: 2450 - total flux cleaned = 0.0169911 Jy ! Component: 2500 - total flux cleaned = 0.0171674 Jy ! Component: 2550 - total flux cleaned = 0.0173769 Jy ! Component: 2600 - total flux cleaned = 0.0173765 Jy ! Component: 2650 - total flux cleaned = 0.0175136 Jy ! Component: 2700 - total flux cleaned = 0.0176497 Jy ! Component: 2750 - total flux cleaned = 0.0175829 Jy ! Component: 2800 - total flux cleaned = 0.0179169 Jy ! Component: 2850 - total flux cleaned = 0.0178175 Jy ! Component: 2900 - total flux cleaned = 0.0180141 Jy ! Component: 2950 - total flux cleaned = 0.0180464 Jy ! Component: 3000 - total flux cleaned = 0.0181432 Jy ! Component: 3050 - total flux cleaned = 0.0181431 Jy ! Component: 3100 - total flux cleaned = 0.0184284 Jy ! Component: 3150 - total flux cleaned = 0.0185222 Jy ! Component: 3200 - total flux cleaned = 0.0184913 Jy ! Component: 3250 - total flux cleaned = 0.0187073 Jy ! Component: 3300 - total flux cleaned = 0.0186453 Jy ! Component: 3350 - total flux cleaned = 0.018858 Jy ! Component: 3400 - total flux cleaned = 0.0189481 Jy ! Component: 3450 - total flux cleaned = 0.0190975 Jy ! Component: 3500 - total flux cleaned = 0.0191568 Jy ! Component: 3550 - total flux cleaned = 0.0193038 Jy ! Component: 3600 - total flux cleaned = 0.0193912 Jy ! Component: 3650 - total flux cleaned = 0.0193911 Jy ! Component: 3700 - total flux cleaned = 0.0195058 Jy ! Component: 3750 - total flux cleaned = 0.0195913 Jy ! Component: 3800 - total flux cleaned = 0.0195631 Jy ! Component: 3850 - total flux cleaned = 0.0197597 Jy ! Component: 3900 - total flux cleaned = 0.0198991 Jy ! Component: 3950 - total flux cleaned = 0.0199543 Jy ! Component: 4000 - total flux cleaned = 0.0200638 Jy ! Component: 4050 - total flux cleaned = 0.0201182 Jy ! Total flux subtracted in 4096 components = 0.0202265 Jy ! Clean residual min=-0.001467 max=0.001349 Jy/beam ! Clean residual mean=-0.000001 rms=0.000449 Jy/beam ! Combined flux in latest and established models = 2.7323 Jy keep ! Adding 324 model components to the UV plane model. ! The established model now contains 503 components and 2.7323 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J2015+3710_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8144 x 1.397 at -8.139 degrees (North through East) ! Clean map min=-0.0028576 max=1.8053 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J2015+3710_X_map.fits wmodel /vlbi/uf001/uva//J2015+3710_X_map.mod ! Writing 503 model components to file: /vlbi/uf001/uva//J2015+3710_X_map.mod wobs /vlbi/uf001/uva//J2015+3710_X_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J2015+3710_X_uvs.fits wwins /vlbi/uf001/uva//J2015+3710_X_map.win ! wwins: Wrote 9 windows to /vlbi/uf001/uva//J2015+3710_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 1.80533 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000448328 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0745005 0.0745005 0.149001 0.298002 0.596004 1.19201 2.38402 4.76803 9.53607 19.0721 38.1443 76.2885 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0013 print "peak= ", int(1000*peak_flux)/1000 ! peak= 1.805 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 4026.82 quit ! Quitting program ! Log file /vlbi/uf001/uva//J2015+3710_X_dfm.log closed on Mon Jan 14 05:25:20 2019