! Started logfile: /vlbi/uf001/uva//J2011-1546_X_b_dfm.log on Mon Jan 14 05:24:24 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /vlbi/uf001/uva//J2011-1546_X_b_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J2011-1546_X_b_uva.fits
! AN table 1: 14 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.945578 visibilities/baseline/integration-bin.
! Found source: J2011-1546
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 121 lines of history.
! 
! Reading 3336 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J2011-1546_X_b]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=2.033654Jy  sigma=19.919492
! Fit after  self-cal, rms=0.812721Jy  sigma=7.711847
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7559 mas, bmaj=5.685 mas, bpa=-33.8 degrees
! Estimated noise=2.64572 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.21862 Jy
! Component: 100  -  total flux cleaned = 1.56843 Jy
! Total flux subtracted in 100 components = 1.56843 Jy
! Clean residual min=-0.102650 max=0.162636 Jy/beam
! Clean residual mean=0.000417 rms=0.031190 Jy/beam
! Combined flux in latest and established models = 1.56843 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 1.56843 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.345614Jy  sigma=3.224600
! Fit after  self-cal, rms=0.345487Jy  sigma=3.222301
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.93 mas, bmaj=5.141 mas, bpa=-34.17 degrees
! Estimated noise=1.34084 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.234134 Jy
! Component: 100  -  total flux cleaned = 0.339373 Jy
! Component: 150  -  total flux cleaned = 0.399894 Jy
! Component: 200  -  total flux cleaned = 0.439412 Jy
! Total flux subtracted in 200 components = 0.439412 Jy
! Clean residual min=-0.030844 max=0.025343 Jy/beam
! Clean residual mean=0.000171 rms=0.008741 Jy/beam
! Combined flux in latest and established models = 2.00784 Jy
! Performing phase self-cal
! Adding 45 model components to the UV plane model.
! The established model now contains 47 components and 2.00784 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.094002Jy  sigma=0.882672
! Fit after  self-cal, rms=0.093764Jy  sigma=0.880414
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.93 x 5.141 at -34.17 degrees (North through East)
! Clean map  min=-0.030103  max=1.6532 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     KP        0.98     LA        1.00     
!   MK        1.01     NL        1.01     PT        0.95     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     KP        0.98     LA        1.01     
!   MK        1.01     NL        1.01     PT        0.94     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     KP        0.97     LA        1.02     
!   MK        1.02     NL        1.02     PT        0.94     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     KP        0.98     LA        1.01     
!   MK        1.00     NL        1.01     PT        0.95     
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.99     KP        0.97     LA        1.01     
!   MK        1.02     NL        1.03     PT        0.94     
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     KP        0.98     LA        1.00     
!   MK        1.01     NL        1.01     PT        0.94     
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     KP        0.98     LA        1.02     
!   MK        1.02     NL        1.02     PT        0.93     
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     KP        0.98     LA        1.01     
!   MK        1.00     NL        1.02     PT        0.95     
! 
! 
! Correcting IF 9.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     KP        0.99     LA        1.01     
!   MK        1.01     NL        1.00     PT        0.95     
! 
! 
! Correcting IF 10.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     KP        0.98     LA        1.02     
!   MK        1.01     NL        1.03     PT        0.94     
! 
! 
! Correcting IF 11.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.00     KP        0.98     LA        1.01     
!   MK        1.01     NL        1.03     PT        0.95     
! 
! 
! Correcting IF 12.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.99     KP        0.95     LA        1.02     
!   MK        1.00     NL        1.02     PT        0.95     
! 
! 
! Fit before self-cal, rms=0.093764Jy  sigma=0.880414
! Fit after  self-cal, rms=0.061390Jy  sigma=0.616502
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9445 mas, bmaj=5.156 mas, bpa=-34.23 degrees
! Estimated noise=1.33914 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00226088 Jy
! Component: 100  -  total flux cleaned = 0.00268232 Jy
! Component: 150  -  total flux cleaned = 0.00336525 Jy
! Component: 200  -  total flux cleaned = 0.00425965 Jy
! Total flux subtracted in 200 components = 0.00425965 Jy
! Clean residual min=-0.007669 max=0.006877 Jy/beam
! Clean residual mean=0.000061 rms=0.001810 Jy/beam
! Combined flux in latest and established models = 2.0121 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 75 components and 2.0121 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059669Jy  sigma=0.599303
! Fit after  self-cal, rms=0.059640Jy  sigma=0.599095
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059640Jy  sigma=0.599095
! Fit after  self-cal, rms=0.059459Jy  sigma=0.598507
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.945 mas, bmaj=5.156 mas, bpa=-34.23 degrees
! Estimated noise=1.33939 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00109722 Jy
! Component: 100  -  total flux cleaned = -0.00122103 Jy
! Component: 150  -  total flux cleaned = -0.00111406 Jy
! Component: 200  -  total flux cleaned = -0.00101473 Jy
! Total flux subtracted in 200 components = -0.00101473 Jy
! Clean residual min=-0.006142 max=0.005907 Jy/beam
! Clean residual mean=0.000054 rms=0.001625 Jy/beam
! Combined flux in latest and established models = 2.01109 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 87 components and 2.01109 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059035Jy  sigma=0.594359
! Fit after  self-cal, rms=0.059038Jy  sigma=0.594349
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.00971e-06 Jy
! Component: 100  -  total flux cleaned = 7.46459e-05 Jy
! Component: 150  -  total flux cleaned = 7.14912e-05 Jy
! Component: 200  -  total flux cleaned = 6.90594e-05 Jy
! Total flux subtracted in 200 components = 6.90594e-05 Jy
! Clean residual min=-0.005560 max=0.005530 Jy/beam
! Clean residual mean=0.000050 rms=0.001545 Jy/beam
! Combined flux in latest and established models = 2.01116 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 98 components and 2.01116 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058808Jy  sigma=0.592494
! Fit after  self-cal, rms=0.058811Jy  sigma=0.592485
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058811Jy  sigma=0.592485
! Fit after  self-cal, rms=0.058719Jy  sigma=0.592247
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9453 mas, bmaj=5.157 mas, bpa=-34.23 degrees
! Estimated noise=1.33967 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00141504 Jy
! Component: 100  -  total flux cleaned = -0.00162464 Jy
! Component: 150  -  total flux cleaned = -0.00168829 Jy
! Component: 200  -  total flux cleaned = -0.00168719 Jy
! Total flux subtracted in 200 components = -0.00168719 Jy
! Clean residual min=-0.005293 max=0.005182 Jy/beam
! Clean residual mean=0.000045 rms=0.001459 Jy/beam
! Combined flux in latest and established models = 2.00947 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 105 components and 2.00947 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058570Jy  sigma=0.590879
! Fit after  self-cal, rms=0.058572Jy  sigma=0.590869
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.94919e-06 Jy
! Component: 100  -  total flux cleaned = -8.47612e-06 Jy
! Component: 150  -  total flux cleaned = -7.00649e-06 Jy
! Component: 200  -  total flux cleaned = 4.21377e-05 Jy
! Total flux subtracted in 200 components = 4.21377e-05 Jy
! Clean residual min=-0.005213 max=0.005054 Jy/beam
! Clean residual mean=0.000043 rms=0.001425 Jy/beam
! Combined flux in latest and established models = 2.00951 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 110 components and 2.00951 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058475Jy  sigma=0.590151
! Fit after  self-cal, rms=0.058476Jy  sigma=0.590145
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058476Jy  sigma=0.590145
! Fit after  self-cal, rms=0.058417Jy  sigma=0.590013
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.46 mas, bmaj=4.863 mas, bpa=-28.84 degrees
! Estimated noise=1.72511 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000170853 Jy
! Component: 100  -  total flux cleaned = -0.000323082 Jy
! Component: 150  -  total flux cleaned = -0.000504914 Jy
! Component: 200  -  total flux cleaned = -0.000675487 Jy
! Total flux subtracted in 200 components = -0.000675487 Jy
! Clean residual min=-0.005975 max=0.006014 Jy/beam
! Clean residual mean=0.000067 rms=0.001974 Jy/beam
! Combined flux in latest and established models = 2.00884 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 133 components and 2.00884 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058365Jy  sigma=0.589651
! Fit after  self-cal, rms=0.058365Jy  sigma=0.589645
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000156044 Jy
! Component: 100  -  total flux cleaned = -0.000306948 Jy
! Component: 150  -  total flux cleaned = -0.000413751 Jy
! Component: 200  -  total flux cleaned = -0.00051563 Jy
! Total flux subtracted in 200 components = -0.00051563 Jy
! Clean residual min=-0.005876 max=0.005809 Jy/beam
! Clean residual mean=0.000064 rms=0.001941 Jy/beam
! Combined flux in latest and established models = 2.00832 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 146 components and 2.00832 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058339Jy  sigma=0.589609
! Fit after  self-cal, rms=0.058341Jy  sigma=0.589605
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9454 mas, bmaj=5.157 mas, bpa=-34.23 degrees
! Estimated noise=1.3397 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9454 x 5.157 at -34.23 degrees (North through East)
! Clean map  min=-0.0062833  max=1.64 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058341Jy  sigma=0.589605
! Fit after  self-cal, rms=0.052605Jy  sigma=0.502019
! Inverting map and beam 
! Estimated beam: bmin=0.9457 mas, bmaj=5.157 mas, bpa=-34.23 degrees
! Estimated noise=1.34035 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00178812 Jy
! Component: 100  -  total flux cleaned = -0.00187613 Jy
! Component: 150  -  total flux cleaned = -0.00203438 Jy
! Component: 200  -  total flux cleaned = -0.00210331 Jy
! Total flux subtracted in 200 components = -0.00210331 Jy
! Clean residual min=-0.004862 max=0.004455 Jy/beam
! Clean residual mean=0.000034 rms=0.001306 Jy/beam
! Combined flux in latest and established models = 2.00622 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 163 components and 2.00622 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.052518Jy  sigma=0.501056
! Fit after  self-cal, rms=0.052518Jy  sigma=0.501054
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.7699e-05 Jy
! Component: 100  -  total flux cleaned = -8.74343e-05 Jy
! Component: 150  -  total flux cleaned = -0.000114834 Jy
! Component: 200  -  total flux cleaned = -0.000138674 Jy
! Total flux subtracted in 200 components = -0.000138674 Jy
! Clean residual min=-0.004822 max=0.004423 Jy/beam
! Clean residual mean=0.000033 rms=0.001296 Jy/beam
! Combined flux in latest and established models = 2.00608 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 175 components and 2.00608 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.052485Jy  sigma=0.500839
! Fit after  self-cal, rms=0.052487Jy  sigma=0.500832
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.052487Jy  sigma=0.500832
! Fit after  self-cal, rms=0.052437Jy  sigma=0.500668
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7714 mas, bmaj=5.674 mas, bpa=-33.88 degrees
! Estimated noise=2.44031 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.22578 Jy
! Component: 100  -  total flux cleaned = 1.56354 Jy
! Component: 150  -  total flux cleaned = 1.73345 Jy
! Component: 200  -  total flux cleaned = 1.82359 Jy
! Total flux subtracted in 200 components = 1.82359 Jy
! Clean residual min=-0.029541 max=0.045105 Jy/beam
! Clean residual mean=0.000159 rms=0.010258 Jy/beam
! Combined flux in latest and established models = 1.82359 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 1.82359 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9457 mas, bmaj=5.157 mas, bpa=-34.23 degrees
! Estimated noise=1.34009 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0745591 Jy
! Component: 100  -  total flux cleaned = 0.115343 Jy
! Component: 150  -  total flux cleaned = 0.140334 Jy
! Component: 200  -  total flux cleaned = 0.156449 Jy
! Total flux subtracted in 200 components = 0.156449 Jy
! Clean residual min=-0.010062 max=0.009212 Jy/beam
! Clean residual mean=0.000066 rms=0.002717 Jy/beam
! Combined flux in latest and established models = 1.98004 Jy
! Adding 42 model components to the UV plane model.
! The established model now contains 52 components and 1.98004 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.462 mas, bmaj=4.862 mas, bpa=-28.86 degrees
! Estimated noise=1.72474 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0139875 Jy
! Component: 100  -  total flux cleaned = 0.02119 Jy
! Component: 150  -  total flux cleaned = 0.0244234 Jy
! Component: 200  -  total flux cleaned = 0.0254249 Jy
! Total flux subtracted in 200 components = 0.0254249 Jy
! Clean residual min=-0.007939 max=0.006035 Jy/beam
! Clean residual mean=0.000082 rms=0.002237 Jy/beam
! Combined flux in latest and established models = 2.00546 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00051665 Jy
! Component: 100  -  total flux cleaned = 0.000959264 Jy
! Component: 150  -  total flux cleaned = 0.00119543 Jy
! Component: 200  -  total flux cleaned = 0.00126692 Jy
! Total flux subtracted in 200 components = 0.00126692 Jy
! Clean residual min=-0.007208 max=0.005930 Jy/beam
! Clean residual mean=0.000077 rms=0.002125 Jy/beam
! Combined flux in latest and established models = 2.00673 Jy
! Adding 73 model components to the UV plane model.
! The established model now contains 122 components and 2.00673 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9457 mas, bmaj=5.157 mas, bpa=-34.23 degrees
! Estimated noise=1.34009 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000538688 Jy
! Component: 100  -  total flux cleaned = -0.000416058 Jy
! Component: 150  -  total flux cleaned = -0.000210019 Jy
! Component: 200  -  total flux cleaned = -0.000214474 Jy
! Total flux subtracted in 200 components = -0.000214474 Jy
! Clean residual min=-0.005395 max=0.005194 Jy/beam
! Clean residual mean=0.000041 rms=0.001456 Jy/beam
! Combined flux in latest and established models = 2.00651 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 144 components and 2.00651 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.052926Jy  sigma=0.504727
! Fit after  self-cal, rms=0.052916Jy  sigma=0.504511
wmodel J2011-1546_X_b_map.mod
! Writing 144 model components to file: J2011-1546_X_b_map.mod
wobs   J2011-1546_X_b_uvs.fits
! Writing UV FITS file: J2011-1546_X_b_uvs.fits
wwins  J2011-1546_X_b_map.win
! wwins: Wrote 1 windows to J2011-1546_X_b_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00116103 Jy
! Component: 100  -  total flux cleaned = -0.00213338 Jy
! Component: 150  -  total flux cleaned = -0.00235352 Jy
! Component: 200  -  total flux cleaned = -0.00228855 Jy
! Component: 250  -  total flux cleaned = -0.0022288 Jy
! Component: 300  -  total flux cleaned = -0.00228884 Jy
! Component: 350  -  total flux cleaned = -0.00217772 Jy
! Component: 400  -  total flux cleaned = -0.00212474 Jy
! Component: 450  -  total flux cleaned = -0.00197569 Jy
! Component: 500  -  total flux cleaned = -0.00164606 Jy
! Component: 550  -  total flux cleaned = -0.00142289 Jy
! Component: 600  -  total flux cleaned = -0.00116572 Jy
! Component: 650  -  total flux cleaned = -0.000918274 Jy
! Component: 700  -  total flux cleaned = -0.000600855 Jy
! Component: 750  -  total flux cleaned = -0.000333846 Jy
! Component: 800  -  total flux cleaned = -7.58631e-05 Jy
! Component: 850  -  total flux cleaned = 0.000173676 Jy
! Component: 900  -  total flux cleaned = 0.000415681 Jy
! Component: 950  -  total flux cleaned = 0.000650589 Jy
! Component: 1000  -  total flux cleaned = 0.000878914 Jy
! Component: 1050  -  total flux cleaned = 0.00113191 Jy
! Component: 1100  -  total flux cleaned = 0.00134658 Jy
! Component: 1150  -  total flux cleaned = 0.00149553 Jy
! Component: 1200  -  total flux cleaned = 0.00152484 Jy
! Component: 1250  -  total flux cleaned = 0.00169556 Jy
! Component: 1300  -  total flux cleaned = 0.00177908 Jy
! Component: 1350  -  total flux cleaned = 0.00196788 Jy
! Component: 1400  -  total flux cleaned = 0.00215144 Jy
! Component: 1450  -  total flux cleaned = 0.00222846 Jy
! Component: 1500  -  total flux cleaned = 0.00227939 Jy
! Component: 1550  -  total flux cleaned = 0.00242763 Jy
! Component: 1600  -  total flux cleaned = 0.00254807 Jy
! Component: 1650  -  total flux cleaned = 0.00266623 Jy
! Component: 1700  -  total flux cleaned = 0.0027823 Jy
! Component: 1750  -  total flux cleaned = 0.00287351 Jy
! Component: 1800  -  total flux cleaned = 0.00298605 Jy
! Component: 1850  -  total flux cleaned = 0.00316264 Jy
! Component: 1900  -  total flux cleaned = 0.00331425 Jy
! Component: 1950  -  total flux cleaned = 0.0034841 Jy
! Component: 2000  -  total flux cleaned = 0.00358829 Jy
! Component: 2050  -  total flux cleaned = 0.00369162 Jy
! Component: 2100  -  total flux cleaned = 0.00389497 Jy
! Component: 2150  -  total flux cleaned = 0.00413593 Jy
! Component: 2200  -  total flux cleaned = 0.00435396 Jy
! Component: 2250  -  total flux cleaned = 0.00455011 Jy
! Component: 2300  -  total flux cleaned = 0.00482154 Jy
! Component: 2350  -  total flux cleaned = 0.00505181 Jy
! Component: 2400  -  total flux cleaned = 0.00529871 Jy
! Component: 2450  -  total flux cleaned = 0.00552437 Jy
! Component: 2500  -  total flux cleaned = 0.0057291 Jy
! Component: 2550  -  total flux cleaned = 0.00589515 Jy
! Component: 2600  -  total flux cleaned = 0.00606001 Jy
! Component: 2650  -  total flux cleaned = 0.00616902 Jy
! Component: 2700  -  total flux cleaned = 0.00624124 Jy
! Component: 2750  -  total flux cleaned = 0.00625917 Jy
! Component: 2800  -  total flux cleaned = 0.00629502 Jy
! Component: 2850  -  total flux cleaned = 0.00634837 Jy
! Component: 2900  -  total flux cleaned = 0.00634833 Jy
! Component: 2950  -  total flux cleaned = 0.00634819 Jy
! Component: 3000  -  total flux cleaned = 0.00638335 Jy
! Component: 3050  -  total flux cleaned = 0.00640077 Jy
! Component: 3100  -  total flux cleaned = 0.00643567 Jy
! Component: 3150  -  total flux cleaned = 0.00645305 Jy
! Component: 3200  -  total flux cleaned = 0.00645306 Jy
! Component: 3250  -  total flux cleaned = 0.00647036 Jy
! Component: 3300  -  total flux cleaned = 0.00647026 Jy
! Component: 3350  -  total flux cleaned = 0.00647026 Jy
! Component: 3400  -  total flux cleaned = 0.00652189 Jy
! Component: 3450  -  total flux cleaned = 0.00652211 Jy
! Component: 3500  -  total flux cleaned = 0.00657355 Jy
! Component: 3550  -  total flux cleaned = 0.00657346 Jy
! Component: 3600  -  total flux cleaned = 0.00659054 Jy
! Component: 3650  -  total flux cleaned = 0.00655621 Jy
! Component: 3700  -  total flux cleaned = 0.00659045 Jy
! Component: 3750  -  total flux cleaned = 0.00659045 Jy
! Component: 3800  -  total flux cleaned = 0.0065562 Jy
! Component: 3850  -  total flux cleaned = 0.00655622 Jy
! Component: 3900  -  total flux cleaned = 0.00653909 Jy
! Component: 3950  -  total flux cleaned = 0.00655624 Jy
! Component: 4000  -  total flux cleaned = 0.00652166 Jy
! Component: 4050  -  total flux cleaned = 0.0065562 Jy
! Total flux subtracted in 4096 components = 0.0065217 Jy
! Clean residual min=-0.001089 max=0.000972 Jy/beam
! Clean residual mean=0.000005 rms=0.000297 Jy/beam
! Combined flux in latest and established models = 2.01304 Jy
keep
! Adding 268 model components to the UV plane model.
! The established model now contains 412 components and 2.01304 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J2011-1546_X_b_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9457 x 5.157 at -34.23 degrees (North through East)
! Clean map  min=-0.0048391  max=1.6384 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J2011-1546_X_b_map.fits
wmodel /vlbi/uf001/uva//J2011-1546_X_b_map.mod
! Writing 412 model components to file: /vlbi/uf001/uva//J2011-1546_X_b_map.mod
wobs   /vlbi/uf001/uva//J2011-1546_X_b_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J2011-1546_X_b_uvs.fits
wwins  /vlbi/uf001/uva//J2011-1546_X_b_map.win
! wwins: Wrote 2 windows to /vlbi/uf001/uva//J2011-1546_X_b_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 1.63843 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000309627 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.0566932 0.0566932 0.113386 0.226773 0.453546 0.907091 1.81418 3.62837 7.25673 14.5135 29.0269 58.0539
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0009 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       1.638 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  5291.64 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J2011-1546_X_b_dfm.log closed on Mon Jan 14 05:24:28 2019