! Started logfile: /vlbi/uf001/uvm//J2007+3722_X_a_dfm.log on Sun Jan 13 22:26:48 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uvm//J2007+3722_X_a_uvm.fits ! Reading UV FITS file: /vlbi/uf001/uvm//J2007+3722_X_a_uvm.fits ! AN table 1: 110 integrations on 45 of 45 possible baselines. ! AN table 2: 148 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.876727 visibilities/baseline/integration-bin. ! Found source: J2007+3722 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 108132 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J2007+3722_X_a] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 92 telescope corrections were flagged in sub-array 1. ! A total of 108 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 92 telescope corrections were flagged in sub-array 1. ! A total of 108 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 92 telescope corrections were flagged in sub-array 1. ! A total of 108 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 92 telescope corrections were flagged in sub-array 1. ! A total of 108 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 5. ! A total of 92 telescope corrections were flagged in sub-array 1. ! A total of 108 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 6. ! A total of 92 telescope corrections were flagged in sub-array 1. ! A total of 108 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 7. ! A total of 92 telescope corrections were flagged in sub-array 1. ! A total of 108 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 8. ! A total of 92 telescope corrections were flagged in sub-array 1. ! A total of 108 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 9. ! A total of 92 telescope corrections were flagged in sub-array 1. ! A total of 108 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 10. ! A total of 92 telescope corrections were flagged in sub-array 1. ! A total of 108 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 11. ! A total of 92 telescope corrections were flagged in sub-array 1. ! A total of 108 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 12. ! A total of 92 telescope corrections were flagged in sub-array 1. ! A total of 108 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.013181Jy sigma=24.356581 ! Fit after self-cal, rms=0.907015Jy sigma=21.907027 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8472 mas, bmaj=1.226 mas, bpa=-5.202 degrees ! Estimated noise=0.276116 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0492021 Jy ! Component: 100 - total flux cleaned = 0.0755619 Jy ! Total flux subtracted in 100 components = 0.0755619 Jy ! Clean residual min=-0.008286 max=0.025500 Jy/beam ! Clean residual mean=0.000009 rms=0.002345 Jy/beam ! Combined flux in latest and established models = 0.0755619 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.0755619 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.112293Jy sigma=2.569268 ! Fit after self-cal, rms=0.111539Jy sigma=2.550540 ! Inverting map ! Added new window around map position (1.4, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0249441 Jy ! Component: 100 - total flux cleaned = 0.0417943 Jy ! Total flux subtracted in 100 components = 0.0417943 Jy ! Clean residual min=-0.005965 max=0.021567 Jy/beam ! Clean residual mean=0.000007 rms=0.001859 Jy/beam ! Combined flux in latest and established models = 0.117356 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 36 components and 0.117356 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.094788Jy sigma=2.164862 ! Fit after self-cal, rms=0.093986Jy sigma=2.143270 ! Inverting map ! Added new window around map position (-1.4, 0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0182661 Jy ! Component: 100 - total flux cleaned = 0.032068 Jy ! Total flux subtracted in 100 components = 0.032068 Jy ! Clean residual min=-0.004939 max=0.013215 Jy/beam ! Clean residual mean=0.000006 rms=0.001478 Jy/beam ! Combined flux in latest and established models = 0.149424 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 66 components and 0.149424 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.082933Jy sigma=1.890430 ! Fit after self-cal, rms=0.082784Jy sigma=1.887132 ! Inverting map ! Added new window around map position (3, -0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0133648 Jy ! Component: 100 - total flux cleaned = 0.0245857 Jy ! Total flux subtracted in 100 components = 0.0245857 Jy ! Clean residual min=-0.004287 max=0.007664 Jy/beam ! Clean residual mean=0.000006 rms=0.001251 Jy/beam ! Combined flux in latest and established models = 0.17401 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 95 components and 0.17401 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075526Jy sigma=1.723071 ! Fit after self-cal, rms=0.075478Jy sigma=1.721703 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0104455 Jy ! Component: 100 - total flux cleaned = 0.0195852 Jy ! Total flux subtracted in 100 components = 0.0195852 Jy ! Clean residual min=-0.003900 max=0.006755 Jy/beam ! Clean residual mean=0.000005 rms=0.001089 Jy/beam ! Combined flux in latest and established models = 0.193595 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 110 components and 0.193595 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070368Jy sigma=1.607195 ! Fit after self-cal, rms=0.070343Jy sigma=1.606526 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00852715 Jy ! Component: 100 - total flux cleaned = 0.0160821 Jy ! Total flux subtracted in 100 components = 0.0160821 Jy ! Clean residual min=-0.003583 max=0.005857 Jy/beam ! Clean residual mean=0.000005 rms=0.000967 Jy/beam ! Combined flux in latest and established models = 0.209677 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 117 components and 0.209677 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066659Jy sigma=1.524164 ! Fit after self-cal, rms=0.066643Jy sigma=1.523724 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.167 mas, bmaj=1.686 mas, bpa=-13.16 degrees ! Estimated noise=0.0915401 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0183894 Jy ! Component: 100 - total flux cleaned = 0.0324905 Jy ! Component: 150 - total flux cleaned = 0.0437038 Jy ! Component: 200 - total flux cleaned = 0.0527365 Jy ! Total flux subtracted in 200 components = 0.0527365 Jy ! Clean residual min=-0.004722 max=0.007503 Jy/beam ! Clean residual mean=-0.000007 rms=0.001578 Jy/beam ! Combined flux in latest and established models = 0.262414 Jy ! Performing phase self-cal ! Adding 73 model components to the UV plane model. ! The established model now contains 157 components and 0.262414 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058302Jy sigma=1.337559 ! Fit after self-cal, rms=0.058220Jy sigma=1.335209 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.167 x 1.686 at -13.16 degrees (North through East) ! Clean map min=-0.0045769 max=0.073027 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.18 FD 1.03 HN 1.01 KP 0.97 ! LA 0.93 MK 1.17 NL 1.19 OV 0.99 ! PT 0.87 SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.13 FD 0.95 HN 1.08 KP 1.01 ! LA 0.80 MK 1.05 NL 1.36 OV 1.04 ! PT 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.18 FD 1.01 HN 0.98 KP 0.97 ! LA 0.93 MK 1.06 NL 1.20 OV 1.00 ! PT 0.87 SC 1.14 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.14 FD 0.95 HN 0.92 KP 1.00 ! LA 0.81 MK 1.09 NL 1.35 OV 1.06 ! PT 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.02 HN 0.98 KP 0.96 ! LA 0.92 MK 1.02 NL 1.18 OV 1.00 ! PT 0.88 SC 1.05 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.10 FD 0.96 HN 1.04 KP 0.99 ! LA 0.82 MK 0.98 NL 1.36 OV 1.05 ! PT 0.98 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 1.01 HN 0.97 KP 0.97 ! LA 0.93 MK 0.97 NL 1.16 OV 1.01 ! PT 0.86 SC 1.16 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.11 FD 0.95 HN 0.90 KP 1.01 ! LA 0.84 MK 1.03 NL 1.33 OV 1.03 ! PT 0.98 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.01 HN 0.92 KP 0.95 ! LA 0.93 MK 1.11 NL 1.18 OV 1.01 ! PT 0.87 SC 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.08 FD 0.94 HN 0.99 KP 1.01 ! LA 0.81 MK 0.99 NL 1.33 OV 1.02 ! PT 0.98 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.00 HN 0.98 KP 0.97 ! LA 0.93 MK 1.00 NL 1.15 OV 0.99 ! PT 0.88 SC 1.10 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.04 FD 0.93 HN 1.00 KP 0.99 ! LA 0.81 MK 1.00 NL 1.34 OV 1.03 ! PT 0.98 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.00 HN 0.94 KP 0.96 ! LA 0.93 MK 1.06 NL 1.14 OV 0.99 ! PT 0.88 SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 0.92 HN 0.82 KP 1.02 ! LA 0.81 MK 0.99 NL 1.26 OV 1.04 ! PT 0.99 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.98 HN 0.92 KP 0.97 ! LA 0.94 MK 1.08 NL 1.13 OV 0.98 ! PT 0.87 SC 1.03 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.04 FD 0.92 HN 0.86 KP 1.00 ! LA 0.81 MK 0.92 NL 1.28 OV 1.02 ! PT 0.97 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.00 HN 0.89 KP 0.96 ! LA 0.94 MK 0.97 NL 1.15 OV 0.98 ! PT 0.86 SC 0.94 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 0.91 HN 0.80 KP 0.97 ! LA 0.82 MK 0.94 NL 1.25 OV 1.03 ! PT 0.97 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.00 HN 0.93 KP 0.96 ! LA 0.92 MK 0.94 NL 1.12 OV 0.97 ! PT 0.87 SC 0.81 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 0.93 HN 0.93 KP 1.00 ! LA 0.81 MK 0.75 NL 1.26 OV 0.99 ! PT 0.97 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.00 HN 0.88 KP 0.97 ! LA 0.93 MK 0.83 NL 1.13 OV 0.97 ! PT 0.87 SC 0.90 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 0.91 HN 0.81 KP 0.99 ! LA 0.83 MK 0.77 NL 1.23 OV 1.01 ! PT 0.99 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.99 HN 0.89 KP 0.97 ! LA 0.93 MK 0.76 NL 1.12 OV 0.98 ! PT 0.86 SC 0.93 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 0.91 HN 0.77 KP 0.98 ! LA 0.84 MK 0.78 NL 1.26 OV 1.00 ! PT 0.97 ! ! ! Fit before self-cal, rms=0.058220Jy sigma=1.335209 ! Fit after self-cal, rms=0.052453Jy sigma=1.248107 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.153 mas, bmaj=1.696 mas, bpa=-12.72 degrees ! Estimated noise=0.0897706 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00356422 Jy ! Component: 100 - total flux cleaned = 0.00474369 Jy ! Component: 150 - total flux cleaned = 0.00545493 Jy ! Component: 200 - total flux cleaned = 0.00576238 Jy ! Total flux subtracted in 200 components = 0.00576238 Jy ! Clean residual min=-0.003172 max=0.002903 Jy/beam ! Clean residual mean=0.000020 rms=0.000868 Jy/beam ! Combined flux in latest and established models = 0.268176 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 168 components and 0.268176 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052204Jy sigma=1.240166 ! Fit after self-cal, rms=0.052217Jy sigma=1.238509 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052217Jy sigma=1.238509 ! Fit after self-cal, rms=0.050490Jy sigma=1.204521 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.135 mas, bmaj=1.685 mas, bpa=-13.08 degrees ! Estimated noise=0.0880871 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00230589 Jy ! Component: 100 - total flux cleaned = 0.00323828 Jy ! Component: 150 - total flux cleaned = 0.00356993 Jy ! Component: 200 - total flux cleaned = 0.00372578 Jy ! Total flux subtracted in 200 components = 0.00372578 Jy ! Clean residual min=-0.001445 max=0.002112 Jy/beam ! Clean residual mean=0.000005 rms=0.000398 Jy/beam ! Combined flux in latest and established models = 0.271902 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 171 components and 0.271902 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050371Jy sigma=1.200714 ! Fit after self-cal, rms=0.050371Jy sigma=1.200135 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4.8, -1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00196451 Jy ! Component: 100 - total flux cleaned = 0.00247218 Jy ! Component: 150 - total flux cleaned = 0.002736 Jy ! Component: 200 - total flux cleaned = 0.00283277 Jy ! Total flux subtracted in 200 components = 0.00283277 Jy ! Clean residual min=-0.001396 max=0.001559 Jy/beam ! Clean residual mean=0.000006 rms=0.000362 Jy/beam ! Combined flux in latest and established models = 0.274735 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 202 components and 0.274735 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050287Jy sigma=1.197523 ! Fit after self-cal, rms=0.050273Jy sigma=1.197176 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050273Jy sigma=1.197176 ! Fit after self-cal, rms=0.049802Jy sigma=1.195896 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.127 mas, bmaj=1.675 mas, bpa=-12.58 degrees ! Estimated noise=0.0869519 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00162951 Jy ! Component: 100 - total flux cleaned = 0.0022966 Jy ! Component: 150 - total flux cleaned = 0.00284847 Jy ! Component: 200 - total flux cleaned = 0.00322504 Jy ! Total flux subtracted in 200 components = 0.00322504 Jy ! Clean residual min=-0.001091 max=0.001336 Jy/beam ! Clean residual mean=0.000003 rms=0.000291 Jy/beam ! Combined flux in latest and established models = 0.27796 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 213 components and 0.27796 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.049737Jy sigma=1.193791 ! Fit after self-cal, rms=0.049730Jy sigma=1.193527 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (18.4, -22.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00111413 Jy ! Component: 100 - total flux cleaned = 0.00130788 Jy ! Component: 150 - total flux cleaned = 0.00145407 Jy ! Component: 200 - total flux cleaned = 0.00158406 Jy ! Total flux subtracted in 200 components = 0.00158406 Jy ! Clean residual min=-0.000996 max=0.001147 Jy/beam ! Clean residual mean=0.000002 rms=0.000268 Jy/beam ! Combined flux in latest and established models = 0.279544 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 232 components and 0.279544 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.049690Jy sigma=1.192348 ! Fit after self-cal, rms=0.049686Jy sigma=1.192227 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.049686Jy sigma=1.192227 ! Fit after self-cal, rms=0.049459Jy sigma=1.191786 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.24 mas, bmaj=2.753 mas, bpa=5.562 degrees ! Estimated noise=0.106456 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0015222 Jy ! Component: 100 - total flux cleaned = 0.00238125 Jy ! Component: 150 - total flux cleaned = 0.00276061 Jy ! Component: 200 - total flux cleaned = 0.00286033 Jy ! Total flux subtracted in 200 components = 0.00286033 Jy ! Clean residual min=-0.001278 max=0.001268 Jy/beam ! Clean residual mean=0.000002 rms=0.000327 Jy/beam ! Combined flux in latest and established models = 0.282404 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 251 components and 0.282404 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.049435Jy sigma=1.190905 ! Fit after self-cal, rms=0.049429Jy sigma=1.190696 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000245713 Jy ! Component: 100 - total flux cleaned = 0.00026686 Jy ! Component: 150 - total flux cleaned = 0.000266617 Jy ! Component: 200 - total flux cleaned = 0.00030176 Jy ! Total flux subtracted in 200 components = 0.00030176 Jy ! Clean residual min=-0.001298 max=0.001220 Jy/beam ! Clean residual mean=0.000002 rms=0.000318 Jy/beam ! Combined flux in latest and established models = 0.282706 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 264 components and 0.282706 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.049419Jy sigma=1.190412 ! Fit after self-cal, rms=0.049417Jy sigma=1.190347 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=1.123 mas, bmaj=1.669 mas, bpa=-12.58 degrees ! Estimated noise=0.0863084 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.123 x 1.669 at -12.58 degrees (North through East) ! Clean map min=-0.00097204 max=0.065129 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8177 mas, bmaj=1.216 mas, bpa=-4.874 degrees ! Estimated noise=0.253862 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0463799 Jy ! Component: 100 - total flux cleaned = 0.0771097 Jy ! Component: 150 - total flux cleaned = 0.100711 Jy ! Component: 200 - total flux cleaned = 0.119711 Jy ! Total flux subtracted in 200 components = 0.119711 Jy ! Clean residual min=-0.005009 max=0.011396 Jy/beam ! Clean residual mean=0.000006 rms=0.001558 Jy/beam ! Combined flux in latest and established models = 0.119711 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 38 model components to the UV plane model. ! The established model now contains 38 components and 0.119711 Jy ! Inverting map and beam ! Estimated beam: bmin=1.123 mas, bmaj=1.669 mas, bpa=-12.58 degrees ! Estimated noise=0.0863084 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0379229 Jy ! Component: 100 - total flux cleaned = 0.063551 Jy ! Component: 150 - total flux cleaned = 0.0827619 Jy ! Component: 200 - total flux cleaned = 0.0976562 Jy ! Total flux subtracted in 200 components = 0.0976562 Jy ! Clean residual min=-0.004031 max=0.009220 Jy/beam ! Clean residual mean=-0.000018 rms=0.001542 Jy/beam ! Combined flux in latest and established models = 0.217367 Jy ! Adding 103 model components to the UV plane model. ! The established model now contains 125 components and 0.217367 Jy ! Inverting map ! Added new window around map position (1.2, -1.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0118741 Jy ! Component: 100 - total flux cleaned = 0.0213395 Jy ! Component: 150 - total flux cleaned = 0.0289699 Jy ! Component: 200 - total flux cleaned = 0.0351789 Jy ! Total flux subtracted in 200 components = 0.0351789 Jy ! Clean residual min=-0.002211 max=0.004557 Jy/beam ! Clean residual mean=-0.000007 rms=0.000722 Jy/beam ! Combined flux in latest and established models = 0.252546 Jy ! Adding 69 model components to the UV plane model. ! The established model now contains 184 components and 0.252546 Jy ! Inverting map ! Added new window around map position (0.2, 1.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00529532 Jy ! Component: 100 - total flux cleaned = 0.00959793 Jy ! Component: 150 - total flux cleaned = 0.0131848 Jy ! Component: 200 - total flux cleaned = 0.0161897 Jy ! Total flux subtracted in 200 components = 0.0161897 Jy ! Clean residual min=-0.001524 max=0.002438 Jy/beam ! Clean residual mean=-0.000001 rms=0.000409 Jy/beam ! Combined flux in latest and established models = 0.268736 Jy ! Adding 56 model components to the UV plane model. ! The established model now contains 219 components and 0.268736 Jy ! Inverting map ! Added new window around map position (-2.6, 1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00270925 Jy ! Component: 100 - total flux cleaned = 0.00493586 Jy ! Component: 150 - total flux cleaned = 0.00684682 Jy ! Component: 200 - total flux cleaned = 0.00848894 Jy ! Total flux subtracted in 200 components = 0.00848894 Jy ! Clean residual min=-0.001235 max=0.001212 Jy/beam ! Clean residual mean=0.000001 rms=0.000291 Jy/beam ! Combined flux in latest and established models = 0.277225 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 241 components and 0.277225 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.24 mas, bmaj=2.753 mas, bpa=5.562 degrees ! Estimated noise=0.106456 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00202163 Jy ! Component: 100 - total flux cleaned = 0.00286172 Jy ! Component: 150 - total flux cleaned = 0.003364 Jy ! Component: 200 - total flux cleaned = 0.00349643 Jy ! Total flux subtracted in 200 components = 0.00349643 Jy ! Clean residual min=-0.001531 max=0.001302 Jy/beam ! Clean residual mean=0.000002 rms=0.000339 Jy/beam ! Combined flux in latest and established models = 0.280721 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00011715 Jy ! Component: 100 - total flux cleaned = 0.000221051 Jy ! Component: 150 - total flux cleaned = 0.000222979 Jy ! Component: 200 - total flux cleaned = 0.000224735 Jy ! Total flux subtracted in 200 components = 0.000224735 Jy ! Clean residual min=-0.001402 max=0.001233 Jy/beam ! Clean residual mean=0.000001 rms=0.000316 Jy/beam ! Combined flux in latest and established models = 0.280946 Jy ! Adding 87 model components to the UV plane model. ! The established model now contains 294 components and 0.280946 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.123 mas, bmaj=1.669 mas, bpa=-12.58 degrees ! Estimated noise=0.0863084 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000107999 Jy ! Component: 100 - total flux cleaned = -0.000105168 Jy ! Component: 150 - total flux cleaned = -0.000104007 Jy ! Component: 200 - total flux cleaned = -1.55551e-05 Jy ! Total flux subtracted in 200 components = -1.55551e-05 Jy ! Clean residual min=-0.000919 max=0.000949 Jy/beam ! Clean residual mean=0.000000 rms=0.000219 Jy/beam ! Combined flux in latest and established models = 0.280931 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 307 components and 0.280931 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.049428Jy sigma=1.190522 ! Fit after self-cal, rms=0.049397Jy sigma=1.189897 wmodel J2007+3722_X_a_map.mod ! Writing 307 model components to file: J2007+3722_X_a_map.mod wobs J2007+3722_X_a_uvs.fits ! Writing UV FITS file: J2007+3722_X_a_uvs.fits wwins J2007+3722_X_a_map.win ! wwins: Wrote 9 windows to J2007+3722_X_a_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000147977 Jy ! Component: 100 - total flux cleaned = 0.000351315 Jy ! Component: 150 - total flux cleaned = 0.000500118 Jy ! Component: 200 - total flux cleaned = 0.000600853 Jy ! Component: 250 - total flux cleaned = 0.000712373 Jy ! Component: 300 - total flux cleaned = 0.00082028 Jy ! Component: 350 - total flux cleaned = 0.000925224 Jy ! Component: 400 - total flux cleaned = 0.00101464 Jy ! Component: 450 - total flux cleaned = 0.00112706 Jy ! Component: 500 - total flux cleaned = 0.00123669 Jy ! Component: 550 - total flux cleaned = 0.00130828 Jy ! Component: 600 - total flux cleaned = 0.00137847 Jy ! Component: 650 - total flux cleaned = 0.00143579 Jy ! Component: 700 - total flux cleaned = 0.00146961 Jy ! Component: 750 - total flux cleaned = 0.00151403 Jy ! Component: 800 - total flux cleaned = 0.00155771 Jy ! Component: 850 - total flux cleaned = 0.00162181 Jy ! Component: 900 - total flux cleaned = 0.00164265 Jy ! Component: 950 - total flux cleaned = 0.00167358 Jy ! Component: 1000 - total flux cleaned = 0.00170417 Jy ! Component: 1050 - total flux cleaned = 0.00174433 Jy ! Component: 1100 - total flux cleaned = 0.00177406 Jy ! Component: 1150 - total flux cleaned = 0.00180344 Jy ! Component: 1200 - total flux cleaned = 0.00183249 Jy ! Component: 1250 - total flux cleaned = 0.00187048 Jy ! Component: 1300 - total flux cleaned = 0.00189863 Jy ! Component: 1350 - total flux cleaned = 0.00188945 Jy ! Component: 1400 - total flux cleaned = 0.00193522 Jy ! Component: 1450 - total flux cleaned = 0.00192605 Jy ! Component: 1500 - total flux cleaned = 0.00194411 Jy ! Component: 1550 - total flux cleaned = 0.00192646 Jy ! Component: 1600 - total flux cleaned = 0.00194377 Jy ! Component: 1650 - total flux cleaned = 0.00193508 Jy ! Component: 1700 - total flux cleaned = 0.00193509 Jy ! Component: 1750 - total flux cleaned = 0.00192672 Jy ! Component: 1800 - total flux cleaned = 0.00194343 Jy ! Component: 1850 - total flux cleaned = 0.00195987 Jy ! Component: 1900 - total flux cleaned = 0.00195977 Jy ! Component: 1950 - total flux cleaned = 0.00197572 Jy ! Component: 2000 - total flux cleaned = 0.00200748 Jy ! Component: 2050 - total flux cleaned = 0.0019915 Jy ! Component: 2100 - total flux cleaned = 0.00199933 Jy ! Component: 2150 - total flux cleaned = 0.00198394 Jy ! Component: 2200 - total flux cleaned = 0.0019916 Jy ! Component: 2250 - total flux cleaned = 0.00200675 Jy ! Component: 2300 - total flux cleaned = 0.00202179 Jy ! Component: 2350 - total flux cleaned = 0.00203673 Jy ! Component: 2400 - total flux cleaned = 0.00201459 Jy ! Component: 2450 - total flux cleaned = 0.00202924 Jy ! Component: 2500 - total flux cleaned = 0.00201477 Jy ! Component: 2550 - total flux cleaned = 0.00203642 Jy ! Component: 2600 - total flux cleaned = 0.00205781 Jy ! Component: 2650 - total flux cleaned = 0.00204351 Jy ! Component: 2700 - total flux cleaned = 0.00207157 Jy ! Component: 2750 - total flux cleaned = 0.00207858 Jy ! Component: 2800 - total flux cleaned = 0.00205088 Jy ! Component: 2850 - total flux cleaned = 0.00207138 Jy ! Component: 2900 - total flux cleaned = 0.00206455 Jy ! Component: 2950 - total flux cleaned = 0.00205097 Jy ! Component: 3000 - total flux cleaned = 0.00205102 Jy ! Component: 3050 - total flux cleaned = 0.00205766 Jy ! Component: 3100 - total flux cleaned = 0.00205104 Jy ! Component: 3150 - total flux cleaned = 0.00205763 Jy ! Component: 3200 - total flux cleaned = 0.00207065 Jy ! Component: 3250 - total flux cleaned = 0.00209005 Jy ! Component: 3300 - total flux cleaned = 0.00209001 Jy ! Component: 3350 - total flux cleaned = 0.00207726 Jy ! Component: 3400 - total flux cleaned = 0.00209628 Jy ! Component: 3450 - total flux cleaned = 0.00211512 Jy ! Component: 3500 - total flux cleaned = 0.00210887 Jy ! Component: 3550 - total flux cleaned = 0.00213371 Jy ! Component: 3600 - total flux cleaned = 0.00210279 Jy ! Component: 3650 - total flux cleaned = 0.00209667 Jy ! Component: 3700 - total flux cleaned = 0.00209665 Jy ! Component: 3750 - total flux cleaned = 0.00208452 Jy ! Component: 3800 - total flux cleaned = 0.00210263 Jy ! Component: 3850 - total flux cleaned = 0.00209669 Jy ! Component: 3900 - total flux cleaned = 0.00210266 Jy ! Component: 3950 - total flux cleaned = 0.00212626 Jy ! Component: 4000 - total flux cleaned = 0.00214972 Jy ! Component: 4050 - total flux cleaned = 0.00211466 Jy ! Total flux subtracted in 4096 components = 0.00210307 Jy ! Clean residual min=-0.000382 max=0.000307 Jy/beam ! Clean residual mean=-0.000000 rms=0.000107 Jy/beam ! Combined flux in latest and established models = 0.283034 Jy keep ! Adding 373 model components to the UV plane model. ! The established model now contains 676 components and 0.283034 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uvm//J2007+3722_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.123 x 1.669 at -12.58 degrees (North through East) ! Clean map min=-0.00079522 max=0.065397 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uvm//J2007+3722_X_a_map.fits wmodel /vlbi/uf001/uvm//J2007+3722_X_a_map.mod ! Writing 676 model components to file: /vlbi/uf001/uvm//J2007+3722_X_a_map.mod wobs /vlbi/uf001/uvm//J2007+3722_X_a_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uvm//J2007+3722_X_a_uvs.fits wwins /vlbi/uf001/uvm//J2007+3722_X_a_map.win ! wwins: Wrote 10 windows to /vlbi/uf001/uvm//J2007+3722_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0653966 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000106362 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.487923 0.487923 0.975846 1.95169 3.90338 7.80677 15.6135 31.2271 62.4541 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.065 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 614.851 quit ! Quitting program ! Log file /vlbi/uf001/uvm//J2007+3722_X_a_dfm.log closed on Sun Jan 13 22:27:02 2019