! Started logfile: /vlbi/uf001/uvm//J2007+3722_S_a_dfm.log on Sun Jan 13 22:26:44 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uvm//J2007+3722_S_a_uvm.fits
! Reading UV FITS file: /vlbi/uf001/uvm//J2007+3722_S_a_uvm.fits
! AN table 1: 258 integrations on 10 of 10 possible baselines.
! Apparent sampling: 0.76124 visibilities/baseline/integration-bin.
! Found source: J2007+3722
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 5892 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J2007+3722_S_a]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 184 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 184 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 184 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.013986Jy  sigma=22.773294
! Fit after  self-cal, rms=0.903399Jy  sigma=20.442982
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=14.28 mas, bmaj=33.15 mas, bpa=53.22 degrees
! Estimated noise=1.00129 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0789313 Jy
! Component: 100  -  total flux cleaned = 0.120693 Jy
! Total flux subtracted in 100 components = 0.120693 Jy
! Clean residual min=-0.017515 max=0.021728 Jy/beam
! Clean residual mean=0.000246 rms=0.007585 Jy/beam
! Combined flux in latest and established models = 0.120693 Jy
! Performing phase self-cal
! Adding 45 model components to the UV plane model.
! The established model now contains 45 components and 0.120693 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.082544Jy  sigma=1.748744
! Fit after  self-cal, rms=0.081339Jy  sigma=1.724113
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=15.74 mas, bmaj=31.49 mas, bpa=55.47 degrees
! Estimated noise=0.422673 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0268868 Jy
! Component: 100  -  total flux cleaned = 0.0416279 Jy
! Component: 150  -  total flux cleaned = 0.0556184 Jy
! Component: 200  -  total flux cleaned = 0.063607 Jy
! Total flux subtracted in 200 components = 0.063607 Jy
! Clean residual min=-0.009370 max=0.009488 Jy/beam
! Clean residual mean=0.000122 rms=0.004812 Jy/beam
! Combined flux in latest and established models = 0.1843 Jy
! Performing phase self-cal
! Adding 173 model components to the UV plane model.
! The established model now contains 217 components and 0.1843 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060870Jy  sigma=1.295634
! Fit after  self-cal, rms=0.060781Jy  sigma=1.290631
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 15.74 x 31.49 at 55.47 degrees (North through East)
! Clean map  min=-0.014705  max=0.10036 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.26     KP        1.26     LA        0.93     OV        0.94     
!   PT        0.76     
! 
! 
! Correcting IF 2.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.22     KP        1.19     LA        0.89     OV        0.76     
!   PT        0.79     
! 
! 
! Correcting IF 3.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.19     KP        1.23     LA        0.89     OV        0.99     
!   PT        0.78     
! 
! 
! Fit before self-cal, rms=0.060781Jy  sigma=1.290631
! Fit after  self-cal, rms=0.056261Jy  sigma=1.104835
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=15.78 mas, bmaj=33.44 mas, bpa=54.97 degrees
! Estimated noise=0.408491 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00111166 Jy
! Component: 100  -  total flux cleaned = -0.00225215 Jy
! Component: 150  -  total flux cleaned = -0.00271274 Jy
! Component: 200  -  total flux cleaned = -0.00312709 Jy
! Total flux subtracted in 200 components = -0.00312709 Jy
! Clean residual min=-0.001570 max=0.001546 Jy/beam
! Clean residual mean=-0.000016 rms=0.000672 Jy/beam
! Combined flux in latest and established models = 0.181173 Jy
! Performing phase self-cal
! Adding 77 model components to the UV plane model.
! The established model now contains 294 components and 0.181173 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.055512Jy  sigma=1.090847
! Fit after  self-cal, rms=0.055991Jy  sigma=1.088085
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.055991Jy  sigma=1.088085
! Fit after  self-cal, rms=0.055943Jy  sigma=1.078169
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=15.79 mas, bmaj=33.6 mas, bpa=54.71 degrees
! Estimated noise=0.408925 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000310125 Jy
! Component: 100  -  total flux cleaned = -0.000639335 Jy
! Component: 150  -  total flux cleaned = -0.000778894 Jy
! Component: 200  -  total flux cleaned = -0.000663131 Jy
! Total flux subtracted in 200 components = -0.000663131 Jy
! Clean residual min=-0.000624 max=0.000627 Jy/beam
! Clean residual mean=-0.000005 rms=0.000254 Jy/beam
! Combined flux in latest and established models = 0.18051 Jy
selfcal
! Performing phase self-cal
! Adding 85 model components to the UV plane model.
! The established model now contains 375 components and 0.18051 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.055828Jy  sigma=1.076063
! Fit after  self-cal, rms=0.055840Jy  sigma=1.075543
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000449832 Jy
! Component: 100  -  total flux cleaned = 0.000556226 Jy
! Component: 150  -  total flux cleaned = 0.000555528 Jy
! Component: 200  -  total flux cleaned = 0.000615384 Jy
! Total flux subtracted in 200 components = 0.000615384 Jy
! Clean residual min=-0.000476 max=0.000473 Jy/beam
! Clean residual mean=-0.000004 rms=0.000208 Jy/beam
! Combined flux in latest and established models = 0.181125 Jy
! Performing phase self-cal
! Adding 88 model components to the UV plane model.
! The established model now contains 457 components and 0.181125 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.055790Jy  sigma=1.074748
! Fit after  self-cal, rms=0.055797Jy  sigma=1.074607
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.055797Jy  sigma=1.074607
! Fit after  self-cal, rms=0.055789Jy  sigma=1.074378
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=15.73 mas, bmaj=33.67 mas, bpa=54.65 degrees
! Estimated noise=0.407163 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00012732 Jy
! Component: 100  -  total flux cleaned = 0.000152826 Jy
! Component: 150  -  total flux cleaned = 0.000288953 Jy
! Component: 200  -  total flux cleaned = 0.000365698 Jy
! Total flux subtracted in 200 components = 0.000365698 Jy
! Clean residual min=-0.000407 max=0.000408 Jy/beam
! Clean residual mean=-0.000003 rms=0.000169 Jy/beam
! Combined flux in latest and established models = 0.181491 Jy
selfcal
! Performing phase self-cal
! Adding 68 model components to the UV plane model.
! The established model now contains 518 components and 0.181491 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.055755Jy  sigma=1.073733
! Fit after  self-cal, rms=0.055758Jy  sigma=1.073650
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000346406 Jy
! Component: 100  -  total flux cleaned = 0.000553066 Jy
! Component: 150  -  total flux cleaned = 0.000576344 Jy
! Component: 200  -  total flux cleaned = 0.000553777 Jy
! Total flux subtracted in 200 components = 0.000553777 Jy
! Clean residual min=-0.000359 max=0.000359 Jy/beam
! Clean residual mean=-0.000002 rms=0.000150 Jy/beam
! Combined flux in latest and established models = 0.182044 Jy
! Performing phase self-cal
! Adding 60 model components to the UV plane model.
! The established model now contains 557 components and 0.182044 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.055733Jy  sigma=1.073233
! Fit after  self-cal, rms=0.055737Jy  sigma=1.073189
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.055737Jy  sigma=1.073189
! Fit after  self-cal, rms=0.055608Jy  sigma=1.073137
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=16.5 mas, bmaj=33.45 mas, bpa=54.58 degrees
! Estimated noise=0.407945 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000166687 Jy
! Component: 100  -  total flux cleaned = 0.00031891 Jy
! Component: 150  -  total flux cleaned = 0.000359137 Jy
! Component: 200  -  total flux cleaned = 0.000303304 Jy
! Total flux subtracted in 200 components = 0.000303304 Jy
! Clean residual min=-0.000304 max=0.000302 Jy/beam
! Clean residual mean=-0.000002 rms=0.000126 Jy/beam
! Combined flux in latest and established models = 0.182348 Jy
selfcal
! Performing phase self-cal
! Adding 59 model components to the UV plane model.
! The established model now contains 596 components and 0.182348 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.055591Jy  sigma=1.072803
! Fit after  self-cal, rms=0.055590Jy  sigma=1.072769
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000301826 Jy
! Component: 100  -  total flux cleaned = 0.000356818 Jy
! Component: 150  -  total flux cleaned = 0.000322405 Jy
! Component: 200  -  total flux cleaned = 0.000289634 Jy
! Total flux subtracted in 200 components = 0.000289634 Jy
! Clean residual min=-0.000272 max=0.000270 Jy/beam
! Clean residual mean=-0.000001 rms=0.000114 Jy/beam
! Combined flux in latest and established models = 0.182637 Jy
! Performing phase self-cal
! Adding 49 model components to the UV plane model.
! The established model now contains 625 components and 0.182637 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.055577Jy  sigma=1.072541
! Fit after  self-cal, rms=0.055577Jy  sigma=1.072522
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=15.7 mas, bmaj=33.7 mas, bpa=54.62 degrees
! Estimated noise=0.405932 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 15.7 x 33.7 at 54.62 degrees (North through East)
! Clean map  min=-0.0052829  max=0.092098 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=14.36 mas, bmaj=35.85 mas, bpa=52.94 degrees
! Estimated noise=1.25235 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0769086 Jy
! Component: 100  -  total flux cleaned = 0.116771 Jy
! Component: 150  -  total flux cleaned = 0.140552 Jy
! Component: 200  -  total flux cleaned = 0.155004 Jy
! Total flux subtracted in 200 components = 0.155004 Jy
! Clean residual min=-0.007966 max=0.008139 Jy/beam
! Clean residual mean=0.000085 rms=0.003138 Jy/beam
! Combined flux in latest and established models = 0.155004 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 87 model components to the UV plane model.
! The established model now contains 87 components and 0.155004 Jy
! Inverting map and beam 
! Estimated beam: bmin=15.7 mas, bmaj=33.7 mas, bpa=54.62 degrees
! Estimated noise=0.405932 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00244922 Jy
! Component: 100  -  total flux cleaned = 0.00305277 Jy
! Component: 150  -  total flux cleaned = 0.00278321 Jy
! Component: 200  -  total flux cleaned = 0.00443359 Jy
! Total flux subtracted in 200 components = 0.00443359 Jy
! Clean residual min=-0.003461 max=0.003499 Jy/beam
! Clean residual mean=0.000043 rms=0.001629 Jy/beam
! Combined flux in latest and established models = 0.159437 Jy
! Adding 134 model components to the UV plane model.
! The established model now contains 220 components and 0.159437 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=16.5 mas, bmaj=33.45 mas, bpa=54.58 degrees
! Estimated noise=0.407945 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000590408 Jy
! Component: 100  -  total flux cleaned = 0.00123476 Jy
! Component: 150  -  total flux cleaned = 0.00108834 Jy
! Component: 200  -  total flux cleaned = 0.000884715 Jy
! Total flux subtracted in 200 components = 0.000884715 Jy
! Clean residual min=-0.001653 max=0.001656 Jy/beam
! Clean residual mean=0.000025 rms=0.000792 Jy/beam
! Combined flux in latest and established models = 0.160322 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.18783e-06 Jy
! Component: 100  -  total flux cleaned = -0.000324523 Jy
! Component: 150  -  total flux cleaned = -0.00025333 Jy
! Component: 200  -  total flux cleaned = -2.64702e-06 Jy
! Total flux subtracted in 200 components = -2.64702e-06 Jy
! Clean residual min=-0.000997 max=0.000996 Jy/beam
! Clean residual mean=0.000021 rms=0.000464 Jy/beam
! Combined flux in latest and established models = 0.160319 Jy
! Adding 216 model components to the UV plane model.
! The established model now contains 426 components and 0.160319 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=15.7 mas, bmaj=33.7 mas, bpa=54.62 degrees
! Estimated noise=0.405932 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000314614 Jy
! Component: 100  -  total flux cleaned = 0.000409742 Jy
! Component: 150  -  total flux cleaned = 0.000488997 Jy
! Component: 200  -  total flux cleaned = 0.000665609 Jy
! Total flux subtracted in 200 components = 0.000665609 Jy
! Clean residual min=-0.000565 max=0.000569 Jy/beam
! Clean residual mean=0.000007 rms=0.000265 Jy/beam
! Combined flux in latest and established models = 0.160985 Jy
selfcal
! Performing phase self-cal
! Adding 80 model components to the UV plane model.
! The established model now contains 505 components and 0.160985 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.055651Jy  sigma=1.074348
! Fit after  self-cal, rms=0.055611Jy  sigma=1.074051
wmodel J2007+3722_S_a_map.mod
! Writing 505 model components to file: J2007+3722_S_a_map.mod
wobs   J2007+3722_S_a_uvs.fits
! Writing UV FITS file: J2007+3722_S_a_uvs.fits
wwins  J2007+3722_S_a_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap   /vlbi/uf001/uvm//J2007+3722_S_a_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 15.7 x 33.7 at 54.62 degrees (North through East)
! Clean map  min=-0.0062481  max=0.089851 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uvm//J2007+3722_S_a_map.fits
wmodel /vlbi/uf001/uvm//J2007+3722_S_a_map.mod
! Writing 505 model components to file: /vlbi/uf001/uvm//J2007+3722_S_a_map.mod
wobs   /vlbi/uf001/uvm//J2007+3722_S_a_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uvm//J2007+3722_S_a_uvs.fits
wwins  /vlbi/uf001/uvm//J2007+3722_S_a_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
! 
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0898507 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000257838 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.860886 0.860886 1.72177 3.44355 6.88709 13.7742 27.5484 55.0967
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.089 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  348.478 
quit
! Quitting program
! Log file /vlbi/uf001/uvm//J2007+3722_S_a_dfm.log closed on Sun Jan 13 22:26:48 2019