! Started logfile: /vlbi/uf001/uva//J2003+6625_X_dfm.log on Mon Jan 14 05:20:43 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uva//J2003+6625_X_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J2003+6625_X_uva.fits ! AN table 1: 116 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.992529 visibilities/baseline/integration-bin. ! Found source: J2003+6625 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 62172 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J2003+6625_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.007862Jy sigma=22.271623 ! Fit after self-cal, rms=0.921920Jy sigma=20.220904 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8132 mas, bmaj=0.8395 mas, bpa=-27.84 degrees ! Estimated noise=0.320748 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.046439 Jy ! Component: 100 - total flux cleaned = 0.0690122 Jy ! Total flux subtracted in 100 components = 0.0690122 Jy ! Clean residual min=-0.004699 max=0.015766 Jy/beam ! Clean residual mean=0.000004 rms=0.001335 Jy/beam ! Combined flux in latest and established models = 0.0690122 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.0690122 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.088569Jy sigma=1.852628 ! Fit after self-cal, rms=0.087918Jy sigma=1.841756 ! Inverting map ! Added new window around map position (-1, -0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.017658 Jy ! Component: 100 - total flux cleaned = 0.0300284 Jy ! Total flux subtracted in 100 components = 0.0300284 Jy ! Clean residual min=-0.003828 max=0.009065 Jy/beam ! Clean residual mean=0.000002 rms=0.001002 Jy/beam ! Combined flux in latest and established models = 0.0990406 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 38 components and 0.0990406 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.079190Jy sigma=1.607578 ! Fit after self-cal, rms=0.078963Jy sigma=1.603035 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0106264 Jy ! Component: 100 - total flux cleaned = 0.018366 Jy ! Total flux subtracted in 100 components = 0.018366 Jy ! Clean residual min=-0.003201 max=0.007490 Jy/beam ! Clean residual mean=0.000001 rms=0.000854 Jy/beam ! Combined flux in latest and established models = 0.117407 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 45 components and 0.117407 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075060Jy sigma=1.497208 ! Fit after self-cal, rms=0.074930Jy sigma=1.494234 ! Inverting map ! Added new window around map position (1.8, 0.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00783531 Jy ! Component: 100 - total flux cleaned = 0.0139933 Jy ! Total flux subtracted in 100 components = 0.0139933 Jy ! Clean residual min=-0.002841 max=0.005533 Jy/beam ! Clean residual mean=0.000001 rms=0.000762 Jy/beam ! Combined flux in latest and established models = 0.1314 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 61 components and 0.1314 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.072584Jy sigma=1.429863 ! Fit after self-cal, rms=0.072535Jy sigma=1.429082 ! Inverting map ! Added new window around map position (-0.2, 1.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00620753 Jy ! Component: 100 - total flux cleaned = 0.0111947 Jy ! Total flux subtracted in 100 components = 0.0111947 Jy ! Clean residual min=-0.002780 max=0.005271 Jy/beam ! Clean residual mean=0.000000 rms=0.000697 Jy/beam ! Combined flux in latest and established models = 0.142595 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 70 components and 0.142595 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070965Jy sigma=1.385777 ! Fit after self-cal, rms=0.070924Jy sigma=1.384832 ! Inverting map ! Added new window around map position (-1, -1.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00536174 Jy ! Component: 100 - total flux cleaned = 0.00969255 Jy ! Total flux subtracted in 100 components = 0.00969255 Jy ! Clean residual min=-0.002605 max=0.004265 Jy/beam ! Clean residual mean=-0.000000 rms=0.000642 Jy/beam ! Combined flux in latest and established models = 0.152287 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 76 components and 0.152287 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069755Jy sigma=1.352269 ! Fit after self-cal, rms=0.069737Jy sigma=1.351959 ! Inverting map ! Added new window around map position (0, -1.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00444626 Jy ! Component: 100 - total flux cleaned = 0.00809007 Jy ! Total flux subtracted in 100 components = 0.00809007 Jy ! Clean residual min=-0.002567 max=0.003391 Jy/beam ! Clean residual mean=-0.000001 rms=0.000602 Jy/beam ! Combined flux in latest and established models = 0.160377 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 85 components and 0.160377 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068907Jy sigma=1.328502 ! Fit after self-cal, rms=0.068897Jy sigma=1.328201 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.096 mas, bmaj=1.12 mas, bpa=-37.87 degrees ! Estimated noise=0.133924 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1.2, -0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00970796 Jy ! Component: 100 - total flux cleaned = 0.0172756 Jy ! Component: 150 - total flux cleaned = 0.0233472 Jy ! Component: 200 - total flux cleaned = 0.028276 Jy ! Total flux subtracted in 200 components = 0.028276 Jy ! Clean residual min=-0.003053 max=0.004634 Jy/beam ! Clean residual mean=-0.000011 rms=0.000899 Jy/beam ! Combined flux in latest and established models = 0.188653 Jy ! Performing phase self-cal ! Adding 61 model components to the UV plane model. ! The established model now contains 129 components and 0.188653 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066985Jy sigma=1.273111 ! Fit after self-cal, rms=0.066953Jy sigma=1.272261 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.096 x 1.12 at -37.87 degrees (North through East) ! Clean map min=-0.0029939 max=0.064177 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 1.01 HN 0.90 KP 0.98 ! LA 0.93 MK 1.12 NL 1.20 OV 0.96 ! PT 0.88 SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 1.03 HN 0.96 KP 1.00 ! LA 0.92 MK 1.10 NL 1.18 OV 0.96 ! PT 0.87 SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 1.02 HN 0.95 KP 0.99 ! LA 0.93 MK 1.11 NL 1.20 OV 0.96 ! PT 0.86 SC 1.00 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 1.02 HN 0.92 KP 0.99 ! LA 0.94 MK 1.09 NL 1.20 OV 0.94 ! PT 0.88 SC 0.99 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 1.02 HN 0.89 KP 1.01 ! LA 0.94 MK 1.14 NL 1.17 OV 0.95 ! PT 0.87 SC 1.00 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 1.00 HN 0.92 KP 1.00 ! LA 0.95 MK 1.08 NL 1.17 OV 0.95 ! PT 0.88 SC 0.97 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 1.01 HN 0.90 KP 1.01 ! LA 0.93 MK 1.08 NL 1.16 OV 0.95 ! PT 0.87 SC 0.95 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.01 HN 0.91 KP 1.01 ! LA 0.92 MK 1.08 NL 1.18 OV 0.96 ! PT 0.87 SC 1.02 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.02 HN 0.98 KP 1.01 ! LA 0.92 MK 1.13 NL 1.17 OV 0.95 ! PT 0.86 SC 0.97 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 1.01 HN 0.91 KP 1.02 ! LA 0.94 MK 1.06 NL 1.18 OV 0.97 ! PT 0.86 SC 0.94 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 1.04 HN 0.86 KP 1.01 ! LA 0.93 MK 0.99 NL 1.21 OV 0.95 ! PT 0.87 SC 0.90 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.03 HN 0.88 KP 1.01 ! LA 0.95 MK 0.98 NL 1.16 OV 0.96 ! PT 0.87 SC 0.94 ! ! ! Fit before self-cal, rms=0.066953Jy sigma=1.272261 ! Fit after self-cal, rms=0.063899Jy sigma=1.239151 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.11 mas, bmaj=1.126 mas, bpa=-35.72 degrees ! Estimated noise=0.134392 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000255842 Jy ! Component: 100 - total flux cleaned = -0.00029217 Jy ! Component: 150 - total flux cleaned = -0.000354738 Jy ! Component: 200 - total flux cleaned = -0.000354533 Jy ! Total flux subtracted in 200 components = -0.000354533 Jy ! Clean residual min=-0.002041 max=0.002516 Jy/beam ! Clean residual mean=-0.000018 rms=0.000610 Jy/beam ! Combined flux in latest and established models = 0.188299 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 142 components and 0.188299 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063857Jy sigma=1.238406 ! Fit after self-cal, rms=0.063884Jy sigma=1.237765 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063884Jy sigma=1.237765 ! Fit after self-cal, rms=0.064823Jy sigma=1.227586 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.109 mas, bmaj=1.116 mas, bpa=-46.71 degrees ! Estimated noise=0.134182 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000163172 Jy ! Component: 100 - total flux cleaned = 0.000133565 Jy ! Component: 150 - total flux cleaned = 0.000107122 Jy ! Component: 200 - total flux cleaned = 6.05617e-05 Jy ! Total flux subtracted in 200 components = 6.05617e-05 Jy ! Clean residual min=-0.001578 max=0.002317 Jy/beam ! Clean residual mean=-0.000004 rms=0.000476 Jy/beam ! Combined flux in latest and established models = 0.188359 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 156 components and 0.188359 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064799Jy sigma=1.227089 ! Fit after self-cal, rms=0.064831Jy sigma=1.226876 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (34.8, 16.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00234744 Jy ! Component: 100 - total flux cleaned = 0.00373885 Jy ! Component: 150 - total flux cleaned = 0.00440102 Jy ! Component: 200 - total flux cleaned = 0.00455512 Jy ! Total flux subtracted in 200 components = 0.00455512 Jy ! Clean residual min=-0.001453 max=0.001812 Jy/beam ! Clean residual mean=-0.000004 rms=0.000431 Jy/beam ! Combined flux in latest and established models = 0.192914 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 187 components and 0.192914 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064759Jy sigma=1.223843 ! Fit after self-cal, rms=0.064737Jy sigma=1.223470 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064737Jy sigma=1.223470 ! Fit after self-cal, rms=0.064930Jy sigma=1.223175 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.107 mas, bmaj=1.108 mas, bpa=22.73 degrees ! Estimated noise=0.133758 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00125712 Jy ! Component: 100 - total flux cleaned = 0.00182528 Jy ! Component: 150 - total flux cleaned = 0.00205942 Jy ! Component: 200 - total flux cleaned = 0.00218643 Jy ! Total flux subtracted in 200 components = 0.00218643 Jy ! Clean residual min=-0.001423 max=0.001723 Jy/beam ! Clean residual mean=-0.000004 rms=0.000406 Jy/beam ! Combined flux in latest and established models = 0.195101 Jy selfcal ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 197 components and 0.195101 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064904Jy sigma=1.222041 ! Fit after self-cal, rms=0.064903Jy sigma=1.221936 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-20.6, 40.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00172296 Jy ! Component: 100 - total flux cleaned = 0.00266832 Jy ! Component: 150 - total flux cleaned = 0.00339009 Jy ! Component: 200 - total flux cleaned = 0.00388502 Jy ! Total flux subtracted in 200 components = 0.00388502 Jy ! Clean residual min=-0.001385 max=0.001721 Jy/beam ! Clean residual mean=-0.000004 rms=0.000380 Jy/beam ! Combined flux in latest and established models = 0.198986 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 217 components and 0.198986 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064860Jy sigma=1.220435 ! Fit after self-cal, rms=0.064855Jy sigma=1.220349 ! Inverting map ! Added new window around map position (19.2, -16.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00174278 Jy ! Component: 100 - total flux cleaned = 0.00277074 Jy ! Component: 150 - total flux cleaned = 0.00354478 Jy ! Component: 200 - total flux cleaned = 0.00415044 Jy ! Total flux subtracted in 200 components = 0.00415044 Jy ! Clean residual min=-0.001312 max=0.001439 Jy/beam ! Clean residual mean=-0.000002 rms=0.000354 Jy/beam ! Combined flux in latest and established models = 0.203136 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 240 components and 0.203136 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064803Jy sigma=1.218857 ! Fit after self-cal, rms=0.064797Jy sigma=1.218750 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064797Jy sigma=1.218750 ! Fit after self-cal, rms=0.064898Jy sigma=1.218503 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.38 mas, bmaj=2.62 mas, bpa=79.29 degrees ! Estimated noise=0.167477 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00148629 Jy ! Component: 100 - total flux cleaned = 0.00255259 Jy ! Component: 150 - total flux cleaned = 0.00340088 Jy ! Component: 200 - total flux cleaned = 0.00409742 Jy ! Total flux subtracted in 200 components = 0.00409742 Jy ! Clean residual min=-0.002206 max=0.002443 Jy/beam ! Clean residual mean=-0.000005 rms=0.000636 Jy/beam ! Combined flux in latest and established models = 0.207234 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 263 components and 0.207234 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064893Jy sigma=1.217908 ! Fit after self-cal, rms=0.064893Jy sigma=1.217828 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000726801 Jy ! Component: 100 - total flux cleaned = 0.00130909 Jy ! Component: 150 - total flux cleaned = 0.0018085 Jy ! Component: 200 - total flux cleaned = 0.00215953 Jy ! Total flux subtracted in 200 components = 0.00215953 Jy ! Clean residual min=-0.002117 max=0.002409 Jy/beam ! Clean residual mean=-0.000004 rms=0.000622 Jy/beam ! Combined flux in latest and established models = 0.209393 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 271 components and 0.209393 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064896Jy sigma=1.217719 ! Fit after self-cal, rms=0.064894Jy sigma=1.217701 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=1.102 mas, bmaj=1.108 mas, bpa=25.6 degrees ! Estimated noise=0.133514 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.102 x 1.108 at 25.6 degrees (North through East) ! Clean map min=-0.0011886 max=0.062558 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8165 mas, bmaj=0.8286 mas, bpa=5.832 degrees ! Estimated noise=0.318867 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0473395 Jy ! Component: 100 - total flux cleaned = 0.0723086 Jy ! Component: 150 - total flux cleaned = 0.0895991 Jy ! Component: 200 - total flux cleaned = 0.102461 Jy ! Total flux subtracted in 200 components = 0.102461 Jy ! Clean residual min=-0.003165 max=0.007486 Jy/beam ! Clean residual mean=0.000002 rms=0.000873 Jy/beam ! Combined flux in latest and established models = 0.102461 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 39 model components to the UV plane model. ! The established model now contains 39 components and 0.102461 Jy ! Inverting map and beam ! Estimated beam: bmin=1.102 mas, bmaj=1.108 mas, bpa=25.6 degrees ! Estimated noise=0.133514 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0231381 Jy ! Component: 100 - total flux cleaned = 0.038 Jy ! Component: 150 - total flux cleaned = 0.0485688 Jy ! Component: 200 - total flux cleaned = 0.0564743 Jy ! Total flux subtracted in 200 components = 0.0564743 Jy ! Clean residual min=-0.002682 max=0.004648 Jy/beam ! Clean residual mean=-0.000002 rms=0.000814 Jy/beam ! Combined flux in latest and established models = 0.158935 Jy ! Adding 95 model components to the UV plane model. ! The established model now contains 114 components and 0.158935 Jy ! Inverting map ! Added new window around map position (-1, 1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00608177 Jy ! Component: 100 - total flux cleaned = 0.0109576 Jy ! Component: 150 - total flux cleaned = 0.0149747 Jy ! Component: 200 - total flux cleaned = 0.0183394 Jy ! Total flux subtracted in 200 components = 0.0183394 Jy ! Clean residual min=-0.001943 max=0.002457 Jy/beam ! Clean residual mean=-0.000004 rms=0.000541 Jy/beam ! Combined flux in latest and established models = 0.177275 Jy ! Adding 73 model components to the UV plane model. ! The established model now contains 165 components and 0.177275 Jy ! Inverting map ! Added new window around map position (36.6, 13). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00295518 Jy ! Component: 100 - total flux cleaned = 0.00548368 Jy ! Component: 150 - total flux cleaned = 0.0077251 Jy ! Component: 200 - total flux cleaned = 0.00973676 Jy ! Total flux subtracted in 200 components = 0.00973676 Jy ! Clean residual min=-0.001612 max=0.001703 Jy/beam ! Clean residual mean=-0.000004 rms=0.000434 Jy/beam ! Combined flux in latest and established models = 0.187012 Jy ! Adding 81 model components to the UV plane model. ! The established model now contains 216 components and 0.187012 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.38 mas, bmaj=2.62 mas, bpa=79.29 degrees ! Estimated noise=0.167477 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00372587 Jy ! Component: 100 - total flux cleaned = 0.00663136 Jy ! Component: 150 - total flux cleaned = 0.00906612 Jy ! Component: 200 - total flux cleaned = 0.0111287 Jy ! Total flux subtracted in 200 components = 0.0111287 Jy ! Clean residual min=-0.002429 max=0.002169 Jy/beam ! Clean residual mean=-0.000008 rms=0.000692 Jy/beam ! Combined flux in latest and established models = 0.19814 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00176578 Jy ! Component: 100 - total flux cleaned = 0.00329946 Jy ! Component: 150 - total flux cleaned = 0.00465258 Jy ! Component: 200 - total flux cleaned = 0.00585164 Jy ! Total flux subtracted in 200 components = 0.00585164 Jy ! Clean residual min=-0.002154 max=0.002072 Jy/beam ! Clean residual mean=-0.000008 rms=0.000621 Jy/beam ! Combined flux in latest and established models = 0.203992 Jy ! Adding 141 model components to the UV plane model. ! The established model now contains 328 components and 0.203992 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.102 mas, bmaj=1.108 mas, bpa=25.6 degrees ! Estimated noise=0.133514 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00099162 Jy ! Component: 100 - total flux cleaned = 0.00175096 Jy ! Component: 150 - total flux cleaned = 0.00233401 Jy ! Component: 200 - total flux cleaned = 0.00271479 Jy ! Total flux subtracted in 200 components = 0.00271479 Jy ! Clean residual min=-0.001240 max=0.001373 Jy/beam ! Clean residual mean=-0.000003 rms=0.000312 Jy/beam ! Combined flux in latest and established models = 0.206707 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 352 components and 0.206707 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064852Jy sigma=1.216703 ! Fit after self-cal, rms=0.064794Jy sigma=1.216111 wmodel J2003+6625_X_map.mod ! Writing 352 model components to file: J2003+6625_X_map.mod wobs J2003+6625_X_uvs.fits ! Writing UV FITS file: J2003+6625_X_uvs.fits wwins J2003+6625_X_map.win ! wwins: Wrote 12 windows to J2003+6625_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000111847 Jy ! Component: 100 - total flux cleaned = 5.17381e-06 Jy ! Component: 150 - total flux cleaned = -0.000137315 Jy ! Component: 200 - total flux cleaned = -0.000295323 Jy ! Component: 250 - total flux cleaned = -0.000371767 Jy ! Component: 300 - total flux cleaned = -0.00042772 Jy ! Component: 350 - total flux cleaned = -0.000463641 Jy ! Component: 400 - total flux cleaned = -0.000463543 Jy ! Component: 450 - total flux cleaned = -0.000516851 Jy ! Component: 500 - total flux cleaned = -0.000620623 Jy ! Component: 550 - total flux cleaned = -0.000603218 Jy ! Component: 600 - total flux cleaned = -0.000553188 Jy ! Component: 650 - total flux cleaned = -0.000553539 Jy ! Component: 700 - total flux cleaned = -0.000570088 Jy ! Component: 750 - total flux cleaned = -0.000570289 Jy ! Component: 800 - total flux cleaned = -0.000586372 Jy ! Component: 850 - total flux cleaned = -0.000617265 Jy ! Component: 900 - total flux cleaned = -0.000602061 Jy ! Component: 950 - total flux cleaned = -0.000632222 Jy ! Component: 1000 - total flux cleaned = -0.00067701 Jy ! Component: 1050 - total flux cleaned = -0.000647212 Jy ! Component: 1100 - total flux cleaned = -0.000749526 Jy ! Component: 1150 - total flux cleaned = -0.000778398 Jy ! Component: 1200 - total flux cleaned = -0.000778318 Jy ! Component: 1250 - total flux cleaned = -0.000820677 Jy ! Component: 1300 - total flux cleaned = -0.000876499 Jy ! Component: 1350 - total flux cleaned = -0.000890129 Jy ! Component: 1400 - total flux cleaned = -0.000862833 Jy ! Component: 1450 - total flux cleaned = -0.000863151 Jy ! Component: 1500 - total flux cleaned = -0.000903362 Jy ! Component: 1550 - total flux cleaned = -0.000916687 Jy ! Component: 1600 - total flux cleaned = -0.000929716 Jy ! Component: 1650 - total flux cleaned = -0.000877841 Jy ! Component: 1700 - total flux cleaned = -0.000878105 Jy ! Component: 1750 - total flux cleaned = -0.000916322 Jy ! Component: 1800 - total flux cleaned = -0.000903863 Jy ! Component: 1850 - total flux cleaned = -0.000878828 Jy ! Component: 1900 - total flux cleaned = -0.000866592 Jy ! Component: 1950 - total flux cleaned = -0.000829955 Jy ! Component: 2000 - total flux cleaned = -0.000854339 Jy ! Component: 2050 - total flux cleaned = -0.000794003 Jy ! Component: 2100 - total flux cleaned = -0.000770159 Jy ! Component: 2150 - total flux cleaned = -0.000758431 Jy ! Component: 2200 - total flux cleaned = -0.000782002 Jy ! Component: 2250 - total flux cleaned = -0.00071226 Jy ! Component: 2300 - total flux cleaned = -0.000700672 Jy ! Component: 2350 - total flux cleaned = -0.000700728 Jy ! Component: 2400 - total flux cleaned = -0.000621243 Jy ! Component: 2450 - total flux cleaned = -0.000632651 Jy ! Component: 2500 - total flux cleaned = -0.000610264 Jy ! Component: 2550 - total flux cleaned = -0.000599247 Jy ! Component: 2600 - total flux cleaned = -0.000544331 Jy ! Component: 2650 - total flux cleaned = -0.00053335 Jy ! Component: 2700 - total flux cleaned = -0.000544111 Jy ! Component: 2750 - total flux cleaned = -0.000522631 Jy ! Component: 2800 - total flux cleaned = -0.00047998 Jy ! Component: 2850 - total flux cleaned = -0.000448245 Jy ! Component: 2900 - total flux cleaned = -0.000437802 Jy ! Component: 2950 - total flux cleaned = -0.000458466 Jy ! Component: 3000 - total flux cleaned = -0.00043789 Jy ! Component: 3050 - total flux cleaned = -0.000417252 Jy ! Component: 3100 - total flux cleaned = -0.000386772 Jy ! Component: 3150 - total flux cleaned = -0.000376577 Jy ! Component: 3200 - total flux cleaned = -0.000386635 Jy ! Component: 3250 - total flux cleaned = -0.000376615 Jy ! Component: 3300 - total flux cleaned = -0.00035681 Jy ! Component: 3350 - total flux cleaned = -0.000337186 Jy ! Component: 3400 - total flux cleaned = -0.000307913 Jy ! Component: 3450 - total flux cleaned = -0.000298281 Jy ! Component: 3500 - total flux cleaned = -0.000307881 Jy ! Component: 3550 - total flux cleaned = -0.000326825 Jy ! Component: 3600 - total flux cleaned = -0.000279213 Jy ! Component: 3650 - total flux cleaned = -0.000279177 Jy ! Component: 3700 - total flux cleaned = -0.000251034 Jy ! Component: 3750 - total flux cleaned = -0.000223162 Jy ! Component: 3800 - total flux cleaned = -0.000260123 Jy ! Component: 3850 - total flux cleaned = -0.000223354 Jy ! Component: 3900 - total flux cleaned = -0.000241496 Jy ! Component: 3950 - total flux cleaned = -0.000241531 Jy ! Component: 4000 - total flux cleaned = -0.0001965 Jy ! Component: 4050 - total flux cleaned = -0.000232442 Jy ! Total flux subtracted in 4096 components = -0.000250254 Jy ! Clean residual min=-0.000492 max=0.000535 Jy/beam ! Clean residual mean=-0.000001 rms=0.000162 Jy/beam ! Combined flux in latest and established models = 0.206457 Jy keep ! Adding 387 model components to the UV plane model. ! The established model now contains 739 components and 0.206457 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J2003+6625_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.102 x 1.108 at 25.6 degrees (North through East) ! Clean map min=-0.00079988 max=0.062731 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J2003+6625_X_map.fits wmodel /vlbi/uf001/uva//J2003+6625_X_map.mod ! Writing 739 model components to file: /vlbi/uf001/uva//J2003+6625_X_map.mod wobs /vlbi/uf001/uva//J2003+6625_X_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J2003+6625_X_uvs.fits wwins /vlbi/uf001/uva//J2003+6625_X_map.win ! wwins: Wrote 13 windows to /vlbi/uf001/uva//J2003+6625_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.062731 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000161785 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.773706 0.773706 1.54741 3.09483 6.18965 12.3793 24.7586 49.5172 99.0344 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.062 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 387.744 quit ! Quitting program ! Log file /vlbi/uf001/uva//J2003+6625_X_dfm.log closed on Mon Jan 14 05:20:53 2019