! Started logfile: /vlbi/uf001/uva//J2002+4506_S_dfm.log on Mon Jan 14 05:20:02 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J2002+4506_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J2002+4506_S_uva.fits
! AN table 1: 57 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.974172 visibilities/baseline/integration-bin.
! Found source: J2002+4506
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 5997 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J2002+4506_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 32 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 32 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 32 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.013002Jy  sigma=23.530046
! Fit after  self-cal, rms=0.884412Jy  sigma=20.517217
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.895 mas, bmaj=4.478 mas, bpa=-10.15 degrees
! Estimated noise=0.607897 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0845283 Jy
! Component: 100  -  total flux cleaned = 0.121778 Jy
! Total flux subtracted in 100 components = 0.121778 Jy
! Clean residual min=-0.011747 max=0.036961 Jy/beam
! Clean residual mean=0.000022 rms=0.003290 Jy/beam
! Combined flux in latest and established models = 0.121778 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.121778 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.088058Jy  sigma=1.941003
! Fit after  self-cal, rms=0.086746Jy  sigma=1.911079
! Inverting map 
! Added new window around map position (4, -1).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.035461 Jy
! Component: 100  -  total flux cleaned = 0.0527013 Jy
! Total flux subtracted in 100 components = 0.0527013 Jy
! Clean residual min=-0.007005 max=0.012585 Jy/beam
! Clean residual mean=0.000014 rms=0.001743 Jy/beam
! Combined flux in latest and established models = 0.174479 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 21 components and 0.174479 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068528Jy  sigma=1.490383
! Fit after  self-cal, rms=0.067090Jy  sigma=1.457043
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0140407 Jy
! Component: 100  -  total flux cleaned = 0.0220617 Jy
! Total flux subtracted in 100 components = 0.0220617 Jy
! Clean residual min=-0.005360 max=0.007745 Jy/beam
! Clean residual mean=0.000010 rms=0.001267 Jy/beam
! Combined flux in latest and established models = 0.196541 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 29 components and 0.196541 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063147Jy  sigma=1.372506
! Fit after  self-cal, rms=0.062888Jy  sigma=1.366385
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.435 mas, bmaj=5.27 mas, bpa=-10.36 degrees
! Estimated noise=0.418341 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (7.5, -4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00953324 Jy
! Component: 100  -  total flux cleaned = 0.0152843 Jy
! Component: 150  -  total flux cleaned = 0.0195954 Jy
! Component: 200  -  total flux cleaned = 0.0229841 Jy
! Total flux subtracted in 200 components = 0.0229841 Jy
! Clean residual min=-0.003965 max=0.005563 Jy/beam
! Clean residual mean=0.000011 rms=0.001003 Jy/beam
! Combined flux in latest and established models = 0.219525 Jy
! Performing phase self-cal
! Adding 48 model components to the UV plane model.
! The established model now contains 73 components and 0.219525 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061031Jy  sigma=1.330504
! Fit after  self-cal, rms=0.060859Jy  sigma=1.326151
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.435 x 5.27 at -10.36 degrees (North through East)
! Clean map  min=-0.003742  max=0.10859 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     HN        0.99     KP        1.01     LA        0.95     
!   MK        1.02     NL        1.06     OV        0.99     PT        0.98     
!   SC        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     HN        1.03     KP        0.98     LA        0.97     
!   MK        1.00     NL        1.04     OV        1.01     PT        0.94     
!   SC        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     HN        0.97     KP        1.01     LA        0.92     
!   MK        0.94     NL        1.04     OV        0.98     PT        0.97     
!   SC        1.08     
! 
! 
! Fit before self-cal, rms=0.060859Jy  sigma=1.326151
! Fit after  self-cal, rms=0.060850Jy  sigma=1.315873
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.435 mas, bmaj=5.299 mas, bpa=-10.82 degrees
! Estimated noise=0.418376 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00248744 Jy
! Component: 100  -  total flux cleaned = 0.00278172 Jy
! Component: 150  -  total flux cleaned = 0.00301317 Jy
! Component: 200  -  total flux cleaned = 0.00325744 Jy
! Total flux subtracted in 200 components = 0.00325744 Jy
! Clean residual min=-0.003397 max=0.003221 Jy/beam
! Clean residual mean=0.000001 rms=0.000824 Jy/beam
! Combined flux in latest and established models = 0.222782 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 84 components and 0.222782 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060657Jy  sigma=1.312666
! Fit after  self-cal, rms=0.060637Jy  sigma=1.311883
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060637Jy  sigma=1.311883
! Fit after  self-cal, rms=0.058515Jy  sigma=1.263445
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.388 mas, bmaj=5.286 mas, bpa=-10.38 degrees
! Estimated noise=0.412867 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00139471 Jy
! Component: 100  -  total flux cleaned = 0.00196566 Jy
! Component: 150  -  total flux cleaned = 0.00225566 Jy
! Component: 200  -  total flux cleaned = 0.00243199 Jy
! Total flux subtracted in 200 components = 0.00243199 Jy
! Clean residual min=-0.002229 max=0.002180 Jy/beam
! Clean residual mean=0.000007 rms=0.000510 Jy/beam
! Combined flux in latest and established models = 0.225214 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 98 components and 0.225214 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058433Jy  sigma=1.261295
! Fit after  self-cal, rms=0.058423Jy  sigma=1.260521
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000160941 Jy
! Component: 100  -  total flux cleaned = 0.000297803 Jy
! Component: 150  -  total flux cleaned = 0.000358964 Jy
! Component: 200  -  total flux cleaned = 0.00038654 Jy
! Total flux subtracted in 200 components = 0.00038654 Jy
! Clean residual min=-0.002178 max=0.002085 Jy/beam
! Clean residual mean=0.000007 rms=0.000494 Jy/beam
! Combined flux in latest and established models = 0.225601 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 107 components and 0.225601 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058384Jy  sigma=1.259579
! Fit after  self-cal, rms=0.058377Jy  sigma=1.259369
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058377Jy  sigma=1.259369
! Fit after  self-cal, rms=0.058211Jy  sigma=1.259158
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.383 mas, bmaj=5.288 mas, bpa=-10.34 degrees
! Estimated noise=0.411695 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000397086 Jy
! Component: 100  -  total flux cleaned = 0.000645901 Jy
! Component: 150  -  total flux cleaned = 0.000878164 Jy
! Component: 200  -  total flux cleaned = 0.000946586 Jy
! Total flux subtracted in 200 components = 0.000946586 Jy
! Clean residual min=-0.002067 max=0.002012 Jy/beam
! Clean residual mean=0.000008 rms=0.000477 Jy/beam
! Combined flux in latest and established models = 0.226547 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 116 components and 0.226547 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058179Jy  sigma=1.258460
! Fit after  self-cal, rms=0.058176Jy  sigma=1.258303
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (69, 50).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00152765 Jy
! Component: 100  -  total flux cleaned = 0.00179358 Jy
! Component: 150  -  total flux cleaned = 0.00201218 Jy
! Component: 200  -  total flux cleaned = 0.00210596 Jy
! Total flux subtracted in 200 components = 0.00210596 Jy
! Clean residual min=-0.001817 max=0.001899 Jy/beam
! Clean residual mean=0.000008 rms=0.000448 Jy/beam
! Combined flux in latest and established models = 0.228653 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 135 components and 0.228653 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058092Jy  sigma=1.256639
! Fit after  self-cal, rms=0.058090Jy  sigma=1.256521
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058090Jy  sigma=1.256521
! Fit after  self-cal, rms=0.058008Jy  sigma=1.256435
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.369 mas, bmaj=8.733 mas, bpa=-8.639 degrees
! Estimated noise=0.53498 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000962574 Jy
! Component: 100  -  total flux cleaned = 0.00128179 Jy
! Component: 150  -  total flux cleaned = 0.00149662 Jy
! Component: 200  -  total flux cleaned = 0.0016127 Jy
! Total flux subtracted in 200 components = 0.0016127 Jy
! Clean residual min=-0.001660 max=0.002052 Jy/beam
! Clean residual mean=0.000018 rms=0.000480 Jy/beam
! Combined flux in latest and established models = 0.230266 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 155 components and 0.230266 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057990Jy  sigma=1.256151
! Fit after  self-cal, rms=0.057989Jy  sigma=1.256069
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (45, 83.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000634882 Jy
! Component: 100  -  total flux cleaned = 0.000493509 Jy
! Component: 150  -  total flux cleaned = 0.000389018 Jy
! Component: 200  -  total flux cleaned = 0.000331531 Jy
! Total flux subtracted in 200 components = 0.000331531 Jy
! Clean residual min=-0.001354 max=0.001545 Jy/beam
! Clean residual mean=0.000017 rms=0.000413 Jy/beam
! Combined flux in latest and established models = 0.230597 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 179 components and 0.230597 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057938Jy  sigma=1.255359
! Fit after  self-cal, rms=0.057931Jy  sigma=1.255230
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.382 mas, bmaj=5.287 mas, bpa=-10.29 degrees
! Estimated noise=0.411159 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.382 x 5.287 at -10.29 degrees (North through East)
! Clean map  min=-0.0015891  max=0.10462 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.856 mas, bmaj=4.498 mas, bpa=-10.39 degrees
! Estimated noise=0.596473 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0885408 Jy
! Component: 100  -  total flux cleaned = 0.132361 Jy
! Component: 150  -  total flux cleaned = 0.157498 Jy
! Component: 200  -  total flux cleaned = 0.174041 Jy
! Total flux subtracted in 200 components = 0.174041 Jy
! Clean residual min=-0.004824 max=0.008973 Jy/beam
! Clean residual mean=0.000015 rms=0.001364 Jy/beam
! Combined flux in latest and established models = 0.17404 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 24 model components to the UV plane model.
! The established model now contains 24 components and 0.17404 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.382 mas, bmaj=5.287 mas, bpa=-10.29 degrees
! Estimated noise=0.411159 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.015823 Jy
! Component: 100  -  total flux cleaned = 0.0257068 Jy
! Component: 150  -  total flux cleaned = 0.0324007 Jy
! Component: 200  -  total flux cleaned = 0.0371031 Jy
! Total flux subtracted in 200 components = 0.0371031 Jy
! Clean residual min=-0.002191 max=0.002679 Jy/beam
! Clean residual mean=0.000014 rms=0.000630 Jy/beam
! Combined flux in latest and established models = 0.211144 Jy
! Adding 47 model components to the UV plane model.
! The established model now contains 64 components and 0.211144 Jy
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00353789 Jy
! Component: 100  -  total flux cleaned = 0.00634695 Jy
! Component: 150  -  total flux cleaned = 0.00863896 Jy
! Component: 200  -  total flux cleaned = 0.00988999 Jy
! Total flux subtracted in 200 components = 0.00988999 Jy
! Clean residual min=-0.001907 max=0.001968 Jy/beam
! Clean residual mean=0.000010 rms=0.000486 Jy/beam
! Combined flux in latest and established models = 0.221034 Jy
! Adding 36 model components to the UV plane model.
! The established model now contains 90 components and 0.221034 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.369 mas, bmaj=8.733 mas, bpa=-8.639 degrees
! Estimated noise=0.53498 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00282994 Jy
! Component: 100  -  total flux cleaned = 0.00442827 Jy
! Component: 150  -  total flux cleaned = 0.00552775 Jy
! Component: 200  -  total flux cleaned = 0.00612946 Jy
! Total flux subtracted in 200 components = 0.00612946 Jy
! Clean residual min=-0.001823 max=0.001786 Jy/beam
! Clean residual mean=0.000020 rms=0.000479 Jy/beam
! Combined flux in latest and established models = 0.227163 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0004736 Jy
! Component: 100  -  total flux cleaned = 0.000925917 Jy
! Component: 150  -  total flux cleaned = 0.0011434 Jy
! Component: 200  -  total flux cleaned = 0.0013096 Jy
! Total flux subtracted in 200 components = 0.0013096 Jy
! Clean residual min=-0.001588 max=0.001589 Jy/beam
! Clean residual mean=0.000019 rms=0.000430 Jy/beam
! Combined flux in latest and established models = 0.228473 Jy
! Adding 112 model components to the UV plane model.
! The established model now contains 190 components and 0.228473 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.382 mas, bmaj=5.287 mas, bpa=-10.29 degrees
! Estimated noise=0.411159 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00011688 Jy
! Component: 100  -  total flux cleaned = -0.000272254 Jy
! Component: 150  -  total flux cleaned = -0.000181856 Jy
! Component: 200  -  total flux cleaned = -0.000182685 Jy
! Total flux subtracted in 200 components = -0.000182685 Jy
! Clean residual min=-0.001498 max=0.001813 Jy/beam
! Clean residual mean=0.000008 rms=0.000401 Jy/beam
! Combined flux in latest and established models = 0.22829 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 216 components and 0.22829 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057869Jy  sigma=1.254089
! Fit after  self-cal, rms=0.057853Jy  sigma=1.253868
wmodel J2002+4506_S_map.mod
! Writing 216 model components to file: J2002+4506_S_map.mod
wobs   J2002+4506_S_uvs.fits
! Writing UV FITS file: J2002+4506_S_uvs.fits
wwins  J2002+4506_S_map.win
! wwins: Wrote 5 windows to J2002+4506_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000472283 Jy
! Component: 100  -  total flux cleaned = 0.000698655 Jy
! Component: 150  -  total flux cleaned = 0.000886344 Jy
! Component: 200  -  total flux cleaned = 0.00109159 Jy
! Component: 250  -  total flux cleaned = 0.00124168 Jy
! Component: 300  -  total flux cleaned = 0.00148433 Jy
! Component: 350  -  total flux cleaned = 0.00162633 Jy
! Component: 400  -  total flux cleaned = 0.00174278 Jy
! Component: 450  -  total flux cleaned = 0.00185677 Jy
! Component: 500  -  total flux cleaned = 0.00190237 Jy
! Component: 550  -  total flux cleaned = 0.00203442 Jy
! Component: 600  -  total flux cleaned = 0.00212182 Jy
! Component: 650  -  total flux cleaned = 0.00222899 Jy
! Component: 700  -  total flux cleaned = 0.00237602 Jy
! Component: 750  -  total flux cleaned = 0.00237601 Jy
! Component: 800  -  total flux cleaned = 0.00243745 Jy
! Component: 850  -  total flux cleaned = 0.00247781 Jy
! Component: 900  -  total flux cleaned = 0.00253735 Jy
! Component: 950  -  total flux cleaned = 0.00255732 Jy
! Component: 1000  -  total flux cleaned = 0.00261577 Jy
! Component: 1050  -  total flux cleaned = 0.00259647 Jy
! Component: 1100  -  total flux cleaned = 0.00263501 Jy
! Component: 1150  -  total flux cleaned = 0.00274756 Jy
! Component: 1200  -  total flux cleaned = 0.00274746 Jy
! Component: 1250  -  total flux cleaned = 0.00283923 Jy
! Component: 1300  -  total flux cleaned = 0.00287556 Jy
! Component: 1350  -  total flux cleaned = 0.00292957 Jy
! Component: 1400  -  total flux cleaned = 0.0029472 Jy
! Component: 1450  -  total flux cleaned = 0.00308785 Jy
! Component: 1500  -  total flux cleaned = 0.00313995 Jy
! Component: 1550  -  total flux cleaned = 0.0032259 Jy
! Component: 1600  -  total flux cleaned = 0.00325996 Jy
! Component: 1650  -  total flux cleaned = 0.0033279 Jy
! Component: 1700  -  total flux cleaned = 0.00336135 Jy
! Component: 1750  -  total flux cleaned = 0.00341104 Jy
! Component: 1800  -  total flux cleaned = 0.00350941 Jy
! Component: 1850  -  total flux cleaned = 0.00355811 Jy
! Component: 1900  -  total flux cleaned = 0.00365473 Jy
! Component: 1950  -  total flux cleaned = 0.00373429 Jy
! Component: 2000  -  total flux cleaned = 0.00378143 Jy
! Component: 2050  -  total flux cleaned = 0.00382835 Jy
! Component: 2100  -  total flux cleaned = 0.00395272 Jy
! Component: 2150  -  total flux cleaned = 0.00402971 Jy
! Component: 2200  -  total flux cleaned = 0.00404504 Jy
! Component: 2250  -  total flux cleaned = 0.00410575 Jy
! Component: 2300  -  total flux cleaned = 0.00415092 Jy
! Component: 2350  -  total flux cleaned = 0.00421067 Jy
! Component: 2400  -  total flux cleaned = 0.00422532 Jy
! Component: 2450  -  total flux cleaned = 0.00431341 Jy
! Component: 2500  -  total flux cleaned = 0.00437162 Jy
! Component: 2550  -  total flux cleaned = 0.00444396 Jy
! Component: 2600  -  total flux cleaned = 0.00444398 Jy
! Component: 2650  -  total flux cleaned = 0.00450113 Jy
! Component: 2700  -  total flux cleaned = 0.00451535 Jy
! Component: 2750  -  total flux cleaned = 0.00461386 Jy
! Component: 2800  -  total flux cleaned = 0.00464179 Jy
! Component: 2850  -  total flux cleaned = 0.0046417 Jy
! Component: 2900  -  total flux cleaned = 0.0047241 Jy
! Component: 2950  -  total flux cleaned = 0.00473775 Jy
! Component: 3000  -  total flux cleaned = 0.00476483 Jy
! Component: 3050  -  total flux cleaned = 0.00479177 Jy
! Component: 3100  -  total flux cleaned = 0.00481851 Jy
! Component: 3150  -  total flux cleaned = 0.0048451 Jy
! Component: 3200  -  total flux cleaned = 0.00488491 Jy
! Component: 3250  -  total flux cleaned = 0.00491133 Jy
! Component: 3300  -  total flux cleaned = 0.00497672 Jy
! Component: 3350  -  total flux cleaned = 0.0050419 Jy
! Component: 3400  -  total flux cleaned = 0.00504192 Jy
! Component: 3450  -  total flux cleaned = 0.00510622 Jy
! Component: 3500  -  total flux cleaned = 0.00519569 Jy
! Component: 3550  -  total flux cleaned = 0.00523385 Jy
! Component: 3600  -  total flux cleaned = 0.00533485 Jy
! Component: 3650  -  total flux cleaned = 0.00538508 Jy
! Component: 3700  -  total flux cleaned = 0.00538513 Jy
! Component: 3750  -  total flux cleaned = 0.00542238 Jy
! Component: 3800  -  total flux cleaned = 0.00548409 Jy
! Component: 3850  -  total flux cleaned = 0.00552103 Jy
! Component: 3900  -  total flux cleaned = 0.00558214 Jy
! Component: 3950  -  total flux cleaned = 0.00565511 Jy
! Component: 4000  -  total flux cleaned = 0.00571562 Jy
! Component: 4050  -  total flux cleaned = 0.00576382 Jy
! Total flux subtracted in 4096 components = 0.00581155 Jy
! Clean residual min=-0.000699 max=0.000704 Jy/beam
! Clean residual mean=0.000002 rms=0.000210 Jy/beam
! Combined flux in latest and established models = 0.234102 Jy
keep
! Adding 287 model components to the UV plane model.
! The established model now contains 503 components and 0.234102 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J2002+4506_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.382 x 5.287 at -10.29 degrees (North through East)
! Clean map  min=-0.0012176  max=0.10508 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J2002+4506_S_map.fits
wmodel /vlbi/uf001/uva//J2002+4506_S_map.mod
! Writing 503 model components to file: /vlbi/uf001/uva//J2002+4506_S_map.mod
wobs   /vlbi/uf001/uva//J2002+4506_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J2002+4506_S_uvs.fits
wwins  /vlbi/uf001/uva//J2002+4506_S_map.win
! wwins: Wrote 6 windows to /vlbi/uf001/uva//J2002+4506_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.10508 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000207368 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.592027 0.592027 1.18405 2.36811 4.73622 9.47243 18.9449 37.8897 75.7794
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.105 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  506.733 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J2002+4506_S_dfm.log closed on Mon Jan 14 05:20:07 2019