! Started logfile: /vlbi/uf001/uva//J2001+1027_S_dfm.log on Mon Jan 14 05:19:15 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J2001+1027_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J2001+1027_S_uva.fits
! AN table 1: 57 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.990253 visibilities/baseline/integration-bin.
! Found source: J2001+1027
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 6096 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J2001+1027_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 54 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 54 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 54 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.017110Jy  sigma=20.839965
! Fit after  self-cal, rms=0.742668Jy  sigma=15.471402
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.575 mas, bmaj=6.668 mas, bpa=-5.369 degrees
! Estimated noise=0.636729 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.191921 Jy
! Component: 100  -  total flux cleaned = 0.23722 Jy
! Total flux subtracted in 100 components = 0.23722 Jy
! Clean residual min=-0.010148 max=0.017949 Jy/beam
! Clean residual mean=-0.000016 rms=0.002603 Jy/beam
! Combined flux in latest and established models = 0.23722 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.23722 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.096907Jy  sigma=1.553075
! Fit after  self-cal, rms=0.096893Jy  sigma=1.552966
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0195476 Jy
! Component: 100  -  total flux cleaned = 0.0297897 Jy
! Total flux subtracted in 100 components = 0.0297897 Jy
! Clean residual min=-0.009108 max=0.015280 Jy/beam
! Clean residual mean=-0.000013 rms=0.002167 Jy/beam
! Combined flux in latest and established models = 0.267009 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 21 components and 0.267009 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.090258Jy  sigma=1.442209
! Fit after  self-cal, rms=0.090254Jy  sigma=1.442071
! Inverting map 
! Added new window around map position (7, 0.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0153203 Jy
! Component: 100  -  total flux cleaned = 0.0241572 Jy
! Total flux subtracted in 100 components = 0.0241572 Jy
! Clean residual min=-0.007618 max=0.009441 Jy/beam
! Clean residual mean=-0.000008 rms=0.001800 Jy/beam
! Combined flux in latest and established models = 0.291167 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 40 components and 0.291167 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.086315Jy  sigma=1.358809
! Fit after  self-cal, rms=0.085958Jy  sigma=1.351601
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.027 mas, bmaj=7.342 mas, bpa=-5.621 degrees
! Estimated noise=0.482053 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0106301 Jy
! Component: 100  -  total flux cleaned = 0.017499 Jy
! Component: 150  -  total flux cleaned = 0.0224497 Jy
! Component: 200  -  total flux cleaned = 0.026169 Jy
! Total flux subtracted in 200 components = 0.026169 Jy
! Clean residual min=-0.007356 max=0.008166 Jy/beam
! Clean residual mean=0.000001 rms=0.001678 Jy/beam
! Combined flux in latest and established models = 0.317336 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 59 components and 0.317336 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.083527Jy  sigma=1.319091
! Fit after  self-cal, rms=0.083398Jy  sigma=1.316872
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.027 x 7.342 at -5.621 degrees (North through East)
! Clean map  min=-0.0068484  max=0.25089 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     HN        1.04     KP        1.02     LA        0.95     
!   MK        0.99     NL        1.01     OV        1.01     PT        0.94     
!   SC        1.02     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     HN        1.02     KP        1.02     LA        0.96     
!   MK        0.99     NL        1.07     OV        0.98     PT        0.96     
!   SC        1.01     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.87     HN        1.02     KP        1.02     LA        0.95     
!   MK        1.03     NL        1.07     OV        1.02     PT        0.97     
!   SC        1.00     
! 
! 
! Fit before self-cal, rms=0.083398Jy  sigma=1.316872
! Fit after  self-cal, rms=0.078523Jy  sigma=1.283946
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.042 mas, bmaj=7.375 mas, bpa=-5.522 degrees
! Estimated noise=0.484071 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (12, -1.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00562938 Jy
! Component: 100  -  total flux cleaned = 0.00674087 Jy
! Component: 150  -  total flux cleaned = 0.00738984 Jy
! Component: 200  -  total flux cleaned = 0.0079426 Jy
! Total flux subtracted in 200 components = 0.0079426 Jy
! Clean residual min=-0.005365 max=0.005332 Jy/beam
! Clean residual mean=0.000009 rms=0.001313 Jy/beam
! Combined flux in latest and established models = 0.325278 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 81 components and 0.325278 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077495Jy  sigma=1.269228
! Fit after  self-cal, rms=0.077450Jy  sigma=1.268221
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077450Jy  sigma=1.268221
! Fit after  self-cal, rms=0.064941Jy  sigma=1.198633
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.051 mas, bmaj=7.355 mas, bpa=-5.616 degrees
! Estimated noise=0.483134 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.71563e-05 Jy
! Component: 100  -  total flux cleaned = 0.000309091 Jy
! Component: 150  -  total flux cleaned = 0.000611475 Jy
! Component: 200  -  total flux cleaned = 0.000986149 Jy
! Total flux subtracted in 200 components = 0.000986149 Jy
! Clean residual min=-0.002725 max=0.002749 Jy/beam
! Clean residual mean=0.000008 rms=0.000664 Jy/beam
! Combined flux in latest and established models = 0.326265 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 97 components and 0.326264 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064778Jy  sigma=1.195622
! Fit after  self-cal, rms=0.064767Jy  sigma=1.195323
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.15153e-05 Jy
! Component: 100  -  total flux cleaned = 0.000247889 Jy
! Component: 150  -  total flux cleaned = 0.000495845 Jy
! Component: 200  -  total flux cleaned = 0.000609909 Jy
! Total flux subtracted in 200 components = 0.000609909 Jy
! Clean residual min=-0.002718 max=0.002646 Jy/beam
! Clean residual mean=0.000008 rms=0.000646 Jy/beam
! Combined flux in latest and established models = 0.326874 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 104 components and 0.326874 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064709Jy  sigma=1.194262
! Fit after  self-cal, rms=0.064709Jy  sigma=1.194234
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064709Jy  sigma=1.194234
! Fit after  self-cal, rms=0.064224Jy  sigma=1.192064
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.053 mas, bmaj=7.349 mas, bpa=-5.619 degrees
! Estimated noise=0.482762 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.95565e-05 Jy
! Component: 100  -  total flux cleaned = 0.00044405 Jy
! Component: 150  -  total flux cleaned = 0.000620789 Jy
! Component: 200  -  total flux cleaned = 0.000739673 Jy
! Total flux subtracted in 200 components = 0.000739673 Jy
! Clean residual min=-0.002406 max=0.002357 Jy/beam
! Clean residual mean=0.000006 rms=0.000582 Jy/beam
! Combined flux in latest and established models = 0.327614 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 120 components and 0.327614 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064148Jy  sigma=1.190753
! Fit after  self-cal, rms=0.064143Jy  sigma=1.190691
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.21874e-05 Jy
! Component: 100  -  total flux cleaned = 3.25116e-05 Jy
! Component: 150  -  total flux cleaned = 6.52726e-05 Jy
! Component: 200  -  total flux cleaned = 6.60538e-05 Jy
! Total flux subtracted in 200 components = 6.60538e-05 Jy
! Clean residual min=-0.002352 max=0.002314 Jy/beam
! Clean residual mean=0.000007 rms=0.000573 Jy/beam
! Combined flux in latest and established models = 0.32768 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 130 components and 0.32768 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064106Jy  sigma=1.190102
! Fit after  self-cal, rms=0.064107Jy  sigma=1.190090
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064107Jy  sigma=1.190090
! Fit after  self-cal, rms=0.064064Jy  sigma=1.189832
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.8 mas, bmaj=11.3 mas, bpa=-5.594 degrees
! Estimated noise=0.636554 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000777762 Jy
! Component: 100  -  total flux cleaned = 0.00103665 Jy
! Component: 150  -  total flux cleaned = 0.00122449 Jy
! Component: 200  -  total flux cleaned = 0.0014189 Jy
! Total flux subtracted in 200 components = 0.0014189 Jy
! Clean residual min=-0.003038 max=0.002459 Jy/beam
! Clean residual mean=0.000015 rms=0.000710 Jy/beam
! Combined flux in latest and established models = 0.329099 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 151 components and 0.329099 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064047Jy  sigma=1.189643
! Fit after  self-cal, rms=0.064047Jy  sigma=1.189608
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000260692 Jy
! Component: 100  -  total flux cleaned = 0.000402559 Jy
! Component: 150  -  total flux cleaned = 0.000467507 Jy
! Component: 200  -  total flux cleaned = 0.000546871 Jy
! Total flux subtracted in 200 components = 0.000546871 Jy
! Clean residual min=-0.002945 max=0.002459 Jy/beam
! Clean residual mean=0.000016 rms=0.000699 Jy/beam
! Combined flux in latest and established models = 0.329646 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 158 components and 0.329646 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064041Jy  sigma=1.189559
! Fit after  self-cal, rms=0.064040Jy  sigma=1.189547
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.053 mas, bmaj=7.346 mas, bpa=-5.607 degrees
! Estimated noise=0.482431 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.053 x 7.346 at -5.607 degrees (North through East)
! Clean map  min=-0.0022677  max=0.25131 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.598 mas, bmaj=6.681 mas, bpa=-5.495 degrees
! Estimated noise=0.64324 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.193768 Jy
! Component: 100  -  total flux cleaned = 0.238553 Jy
! Component: 150  -  total flux cleaned = 0.258913 Jy
! Component: 200  -  total flux cleaned = 0.272985 Jy
! Total flux subtracted in 200 components = 0.272985 Jy
! Clean residual min=-0.004969 max=0.009074 Jy/beam
! Clean residual mean=-0.000009 rms=0.001417 Jy/beam
! Combined flux in latest and established models = 0.272986 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 24 model components to the UV plane model.
! The established model now contains 24 components and 0.272986 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.053 mas, bmaj=7.346 mas, bpa=-5.607 degrees
! Estimated noise=0.482431 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (4, -2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0139888 Jy
! Component: 100  -  total flux cleaned = 0.0237313 Jy
! Component: 150  -  total flux cleaned = 0.0308305 Jy
! Component: 200  -  total flux cleaned = 0.036178 Jy
! Total flux subtracted in 200 components = 0.036178 Jy
! Clean residual min=-0.003081 max=0.003441 Jy/beam
! Clean residual mean=0.000002 rms=0.000816 Jy/beam
! Combined flux in latest and established models = 0.309164 Jy
! Adding 49 model components to the UV plane model.
! The established model now contains 63 components and 0.309164 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.8 mas, bmaj=11.3 mas, bpa=-5.594 degrees
! Estimated noise=0.636554 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00774808 Jy
! Component: 100  -  total flux cleaned = 0.012278 Jy
! Component: 150  -  total flux cleaned = 0.0151544 Jy
! Component: 200  -  total flux cleaned = 0.0170511 Jy
! Total flux subtracted in 200 components = 0.0170511 Jy
! Clean residual min=-0.003079 max=0.002484 Jy/beam
! Clean residual mean=0.000014 rms=0.000750 Jy/beam
! Combined flux in latest and established models = 0.326215 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00124939 Jy
! Component: 100  -  total flux cleaned = 0.00175066 Jy
! Component: 150  -  total flux cleaned = 0.00215131 Jy
! Component: 200  -  total flux cleaned = 0.00245145 Jy
! Total flux subtracted in 200 components = 0.00245145 Jy
! Clean residual min=-0.002852 max=0.002542 Jy/beam
! Clean residual mean=0.000015 rms=0.000703 Jy/beam
! Combined flux in latest and established models = 0.328666 Jy
! Adding 74 model components to the UV plane model.
! The established model now contains 127 components and 0.328666 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.053 mas, bmaj=7.346 mas, bpa=-5.607 degrees
! Estimated noise=0.482431 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000196266 Jy
! Component: 100  -  total flux cleaned = 0.000296996 Jy
! Component: 150  -  total flux cleaned = 0.000210825 Jy
! Component: 200  -  total flux cleaned = 0.00021174 Jy
! Total flux subtracted in 200 components = 0.00021174 Jy
! Clean residual min=-0.002243 max=0.002372 Jy/beam
! Clean residual mean=0.000006 rms=0.000559 Jy/beam
! Combined flux in latest and established models = 0.328878 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 151 components and 0.328878 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064061Jy  sigma=1.189866
! Fit after  self-cal, rms=0.064043Jy  sigma=1.189606
wmodel J2001+1027_S_map.mod
! Writing 151 model components to file: J2001+1027_S_map.mod
wobs   J2001+1027_S_uvs.fits
! Writing UV FITS file: J2001+1027_S_uvs.fits
wwins  J2001+1027_S_map.win
! wwins: Wrote 4 windows to J2001+1027_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000308447 Jy
! Component: 100  -  total flux cleaned = 0.000308672 Jy
! Component: 150  -  total flux cleaned = 0.000270546 Jy
! Component: 200  -  total flux cleaned = 0.000162957 Jy
! Component: 250  -  total flux cleaned = 0.000163661 Jy
! Component: 300  -  total flux cleaned = 9.67144e-05 Jy
! Component: 350  -  total flux cleaned = 3.23864e-05 Jy
! Component: 400  -  total flux cleaned = -3.03725e-05 Jy
! Component: 450  -  total flux cleaned = -0.000183892 Jy
! Component: 500  -  total flux cleaned = -0.000273279 Jy
! Component: 550  -  total flux cleaned = -0.000301772 Jy
! Component: 600  -  total flux cleaned = -0.000300951 Jy
! Component: 650  -  total flux cleaned = -0.00032847 Jy
! Component: 700  -  total flux cleaned = -0.000328291 Jy
! Component: 750  -  total flux cleaned = -0.00035559 Jy
! Component: 800  -  total flux cleaned = -0.000435842 Jy
! Component: 850  -  total flux cleaned = -0.000382962 Jy
! Component: 900  -  total flux cleaned = -0.000382894 Jy
! Component: 950  -  total flux cleaned = -0.00040846 Jy
! Component: 1000  -  total flux cleaned = -0.000433215 Jy
! Component: 1050  -  total flux cleaned = -0.000482422 Jy
! Component: 1100  -  total flux cleaned = -0.000531059 Jy
! Component: 1150  -  total flux cleaned = -0.000555012 Jy
! Component: 1200  -  total flux cleaned = -0.000555301 Jy
! Component: 1250  -  total flux cleaned = -0.000625501 Jy
! Component: 1300  -  total flux cleaned = -0.000648228 Jy
! Component: 1350  -  total flux cleaned = -0.000625451 Jy
! Component: 1400  -  total flux cleaned = -0.000625919 Jy
! Component: 1450  -  total flux cleaned = -0.000759124 Jy
! Component: 1500  -  total flux cleaned = -0.000780639 Jy
! Component: 1550  -  total flux cleaned = -0.000737433 Jy
! Component: 1600  -  total flux cleaned = -0.000865948 Jy
! Component: 1650  -  total flux cleaned = -0.000886736 Jy
! Component: 1700  -  total flux cleaned = -0.000907357 Jy
! Component: 1750  -  total flux cleaned = -0.000886595 Jy
! Component: 1800  -  total flux cleaned = -0.000948173 Jy
! Component: 1850  -  total flux cleaned = -0.000948183 Jy
! Component: 1900  -  total flux cleaned = -0.000928306 Jy
! Component: 1950  -  total flux cleaned = -0.000968011 Jy
! Component: 2000  -  total flux cleaned = -0.000987761 Jy
! Component: 2050  -  total flux cleaned = -0.000968422 Jy
! Component: 2100  -  total flux cleaned = -0.000987512 Jy
! Component: 2150  -  total flux cleaned = -0.00102528 Jy
! Component: 2200  -  total flux cleaned = -0.00100646 Jy
! Component: 2250  -  total flux cleaned = -0.00104384 Jy
! Component: 2300  -  total flux cleaned = -0.00102571 Jy
! Component: 2350  -  total flux cleaned = -0.00106208 Jy
! Component: 2400  -  total flux cleaned = -0.00104401 Jy
! Component: 2450  -  total flux cleaned = -0.00106197 Jy
! Component: 2500  -  total flux cleaned = -0.00102619 Jy
! Component: 2550  -  total flux cleaned = -0.00107921 Jy
! Component: 2600  -  total flux cleaned = -0.0010616 Jy
! Component: 2650  -  total flux cleaned = -0.00107869 Jy
! Component: 2700  -  total flux cleaned = -0.00107862 Jy
! Component: 2750  -  total flux cleaned = -0.00106158 Jy
! Component: 2800  -  total flux cleaned = -0.00106148 Jy
! Component: 2850  -  total flux cleaned = -0.00106165 Jy
! Component: 2900  -  total flux cleaned = -0.00109482 Jy
! Component: 2950  -  total flux cleaned = -0.00104554 Jy
! Component: 3000  -  total flux cleaned = -0.00107821 Jy
! Component: 3050  -  total flux cleaned = -0.00104582 Jy
! Component: 3100  -  total flux cleaned = -0.00104595 Jy
! Component: 3150  -  total flux cleaned = -0.00102986 Jy
! Component: 3200  -  total flux cleaned = -0.00102976 Jy
! Component: 3250  -  total flux cleaned = -0.000998306 Jy
! Component: 3300  -  total flux cleaned = -0.00104477 Jy
! Component: 3350  -  total flux cleaned = -0.00101391 Jy
! Component: 3400  -  total flux cleaned = -0.000968242 Jy
! Component: 3450  -  total flux cleaned = -0.000953193 Jy
! Component: 3500  -  total flux cleaned = -0.000908017 Jy
! Component: 3550  -  total flux cleaned = -0.000908159 Jy
! Component: 3600  -  total flux cleaned = -0.00090817 Jy
! Component: 3650  -  total flux cleaned = -0.000864087 Jy
! Component: 3700  -  total flux cleaned = -0.00077653 Jy
! Component: 3750  -  total flux cleaned = -0.000776603 Jy
! Component: 3800  -  total flux cleaned = -0.000819777 Jy
! Component: 3850  -  total flux cleaned = -0.000805306 Jy
! Component: 3900  -  total flux cleaned = -0.000762725 Jy
! Component: 3950  -  total flux cleaned = -0.000776751 Jy
! Component: 4000  -  total flux cleaned = -0.000832603 Jy
! Component: 4050  -  total flux cleaned = -0.000790827 Jy
! Total flux subtracted in 4096 components = -0.000708204 Jy
! Clean residual min=-0.000843 max=0.000726 Jy/beam
! Clean residual mean=0.000002 rms=0.000248 Jy/beam
! Combined flux in latest and established models = 0.32817 Jy
keep
! Adding 312 model components to the UV plane model.
! The established model now contains 463 components and 0.32817 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J2001+1027_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.053 x 7.346 at -5.607 degrees (North through East)
! Clean map  min=-0.001644  max=0.25308 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J2001+1027_S_map.fits
wmodel /vlbi/uf001/uva//J2001+1027_S_map.mod
! Writing 463 model components to file: /vlbi/uf001/uva//J2001+1027_S_map.mod
wobs   /vlbi/uf001/uva//J2001+1027_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J2001+1027_S_uvs.fits
wwins  /vlbi/uf001/uva//J2001+1027_S_map.win
! wwins: Wrote 5 windows to /vlbi/uf001/uva//J2001+1027_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.253083 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00024494 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.290346 0.290346 0.580693 1.16139 2.32277 4.64554 9.29108 18.5822 37.1643 74.3287
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.253 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1033.25 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J2001+1027_S_dfm.log closed on Mon Jan 14 05:19:19 2019