! Started logfile: /vlbi/uf001/uvm//J2000-1748_X_b_dfm.log on Sun Jan 13 22:25:37 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uvm//J2000-1748_X_b_uvm.fits ! Reading UV FITS file: /vlbi/uf001/uvm//J2000-1748_X_b_uvm.fits ! AN table 1: 9 integrations on 3 of 3 possible baselines. ! AN table 2: 9 integrations on 21 of 21 possible baselines. ! AN table 3: 14 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.850329 visibilities/baseline/integration-bin. ! Found source: J2000-1748 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 6204 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J2000-1748_X_b] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! A total of 21 telescope corrections were flagged in sub-array 2. ! A total of 60 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! A total of 21 telescope corrections were flagged in sub-array 2. ! A total of 60 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! A total of 21 telescope corrections were flagged in sub-array 2. ! A total of 60 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! A total of 21 telescope corrections were flagged in sub-array 2. ! A total of 60 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 5. ! A total of 6 telescope corrections were flagged in sub-array 1. ! A total of 21 telescope corrections were flagged in sub-array 2. ! A total of 60 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 6. ! A total of 6 telescope corrections were flagged in sub-array 1. ! A total of 21 telescope corrections were flagged in sub-array 2. ! A total of 60 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 7. ! A total of 6 telescope corrections were flagged in sub-array 1. ! A total of 21 telescope corrections were flagged in sub-array 2. ! A total of 60 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 8. ! A total of 6 telescope corrections were flagged in sub-array 1. ! A total of 21 telescope corrections were flagged in sub-array 2. ! A total of 60 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 9. ! A total of 6 telescope corrections were flagged in sub-array 1. ! A total of 21 telescope corrections were flagged in sub-array 2. ! A total of 60 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 10. ! A total of 6 telescope corrections were flagged in sub-array 1. ! A total of 21 telescope corrections were flagged in sub-array 2. ! A total of 60 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 11. ! A total of 6 telescope corrections were flagged in sub-array 1. ! A total of 21 telescope corrections were flagged in sub-array 2. ! A total of 60 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 12. ! A total of 6 telescope corrections were flagged in sub-array 1. ! A total of 21 telescope corrections were flagged in sub-array 2. ! A total of 60 telescope corrections were flagged in sub-array 3. ! ! Fit before self-cal, rms=1.653751Jy sigma=19.651565 ! Fit after self-cal, rms=0.348152Jy sigma=4.009000 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7404 mas, bmaj=2.606 mas, bpa=-17.69 degrees ! Estimated noise=1.36587 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.954668 Jy ! Component: 100 - total flux cleaned = 1.17028 Jy ! Total flux subtracted in 100 components = 1.17028 Jy ! Clean residual min=-0.043459 max=0.106164 Jy/beam ! Clean residual mean=0.000111 rms=0.011028 Jy/beam ! Combined flux in latest and established models = 1.17028 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 1.17028 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.236341Jy sigma=2.710247 ! Fit after self-cal, rms=0.236339Jy sigma=2.710212 ! Inverting map ! Added new window around map position (-1.6, -1.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0988821 Jy ! Component: 100 - total flux cleaned = 0.152362 Jy ! Total flux subtracted in 100 components = 0.152362 Jy ! Clean residual min=-0.032892 max=0.077443 Jy/beam ! Clean residual mean=0.000058 rms=0.008245 Jy/beam ! Combined flux in latest and established models = 1.32264 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 18 components and 1.32264 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.180023Jy sigma=2.091651 ! Fit after self-cal, rms=0.175951Jy sigma=2.042993 ! Inverting map ! Added new window around map position (-5, 7.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0557022 Jy ! Component: 100 - total flux cleaned = 0.0650713 Jy ! Total flux subtracted in 100 components = 0.0650713 Jy ! Clean residual min=-0.028062 max=0.048844 Jy/beam ! Clean residual mean=0.000044 rms=0.006928 Jy/beam ! Combined flux in latest and established models = 1.38772 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 35 components and 1.38772 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.158643Jy sigma=1.852146 ! Fit after self-cal, rms=0.157517Jy sigma=1.836868 ! Inverting map ! Added new window around map position (1.6, 1.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0356893 Jy ! Component: 100 - total flux cleaned = 0.0439101 Jy ! Total flux subtracted in 100 components = 0.0439101 Jy ! Clean residual min=-0.024261 max=0.036353 Jy/beam ! Clean residual mean=0.000031 rms=0.006150 Jy/beam ! Combined flux in latest and established models = 1.43163 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 50 components and 1.43163 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.147087Jy sigma=1.717083 ! Fit after self-cal, rms=0.146245Jy sigma=1.708615 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.004 mas, bmaj=2.636 mas, bpa=-13.88 degrees ! Estimated noise=0.994309 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0170478 Jy ! Component: 100 - total flux cleaned = 0.0199408 Jy ! Component: 150 - total flux cleaned = 0.0213954 Jy ! Component: 200 - total flux cleaned = 0.0234592 Jy ! Total flux subtracted in 200 components = 0.0234592 Jy ! Clean residual min=-0.028518 max=0.043081 Jy/beam ! Clean residual mean=0.000046 rms=0.008638 Jy/beam ! Combined flux in latest and established models = 1.45509 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 70 components and 1.45509 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.141499Jy sigma=1.655564 ! Fit after self-cal, rms=0.141152Jy sigma=1.651944 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.004 x 2.636 at -13.88 degrees (North through East) ! Clean map min=-0.028293 max=1.2026 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 21 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! HN 0.00* NL 0.00* SC 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 KP 0.96 LA 0.98 MK 0.99 ! NL 1.08 OV 0.85 PT 0.93 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.03 FD 1.01 HN 1.05 KP 1.02 ! LA 1.05 MK 0.98 NL 1.02 PT 1.00 ! ! ! Correcting IF 2. ! A total of 21 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! HN 0.00* NL 0.00* SC 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 KP 0.97 LA 0.99 MK 0.99 ! NL 1.11 OV 0.85 PT 0.94 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.04 FD 1.01 HN 1.07 KP 1.04 ! LA 1.05 MK 0.98 NL 1.00 PT 0.97 ! ! ! Correcting IF 3. ! A total of 21 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! HN 0.00* NL 0.00* SC 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 KP 0.98 LA 0.98 MK 1.00 ! NL 1.12 OV 0.85 PT 0.93 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.03 FD 1.00 HN 1.08 KP 1.03 ! LA 1.06 MK 0.99 NL 0.99 PT 0.98 ! ! ! Correcting IF 4. ! A total of 21 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! HN 0.00* NL 0.00* SC 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 KP 0.96 LA 0.97 MK 0.99 ! NL 1.07 OV 0.86 PT 0.94 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.04 FD 1.02 HN 1.06 KP 1.02 ! LA 1.06 MK 0.99 NL 0.99 PT 0.98 ! ! ! Correcting IF 5. ! A total of 21 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! HN 0.00* NL 0.00* SC 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 KP 0.97 LA 0.99 MK 1.01 ! NL 1.09 OV 0.85 PT 0.95 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.03 FD 1.01 HN 1.07 KP 1.03 ! LA 1.06 MK 0.99 NL 1.03 PT 0.99 ! ! ! Correcting IF 6. ! A total of 21 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! HN 0.00* NL 0.00* SC 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 KP 0.99 LA 0.98 MK 1.00 ! NL 1.10 OV 0.85 PT 0.95 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.01 FD 1.01 HN 1.06 KP 1.01 ! LA 1.05 MK 1.00 NL 1.00 PT 1.00 ! ! ! Correcting IF 7. ! A total of 21 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! HN 0.00* NL 0.00* SC 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 KP 0.97 LA 0.99 MK 0.99 ! NL 1.11 OV 0.86 PT 0.95 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.04 FD 1.01 HN 1.03 KP 1.03 ! LA 1.05 MK 1.00 NL 1.02 PT 0.98 ! ! ! Correcting IF 8. ! A total of 21 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! HN 0.00* NL 0.00* SC 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 KP 0.97 LA 0.98 MK 0.98 ! NL 1.08 OV 0.86 PT 0.95 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.04 FD 1.02 HN 1.04 KP 1.03 ! LA 1.04 MK 0.98 NL 1.00 PT 0.99 ! ! ! Correcting IF 9. ! A total of 21 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! HN 0.00* NL 0.00* SC 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 KP 0.96 LA 0.99 MK 1.00 ! NL 1.07 OV 0.86 PT 0.95 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.03 FD 1.02 HN 1.06 KP 1.03 ! LA 1.05 MK 0.99 NL 0.99 PT 0.98 ! ! ! Correcting IF 10. ! A total of 21 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! HN 0.00* NL 0.00* SC 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 KP 0.98 LA 0.98 MK 0.99 ! NL 1.07 OV 0.86 PT 0.94 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.05 FD 1.02 HN 1.06 KP 1.02 ! LA 1.05 MK 0.98 NL 1.02 PT 0.98 ! ! ! Correcting IF 11. ! A total of 21 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! HN 0.00* NL 0.00* SC 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 KP 0.97 LA 0.98 MK 1.00 ! NL 1.08 OV 0.86 PT 0.95 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.05 FD 1.01 HN 1.04 KP 1.02 ! LA 1.08 MK 1.00 NL 1.02 PT 0.99 ! ! ! Correcting IF 12. ! A total of 21 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! HN 0.00* NL 0.00* SC 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 KP 0.97 LA 0.99 MK 0.99 ! NL 1.04 OV 0.86 PT 0.95 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.05 FD 1.02 HN 1.04 KP 1.00 ! LA 1.07 MK 1.01 NL 0.99 PT 1.00 ! ! ! Fit before self-cal, rms=0.141152Jy sigma=1.651944 ! Fit after self-cal, rms=0.093152Jy sigma=1.072313 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9815 mas, bmaj=3.271 mas, bpa=-15.9 degrees ! Estimated noise=1.02896 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0228021 Jy ! Component: 100 - total flux cleaned = -0.0274734 Jy ! Component: 150 - total flux cleaned = -0.030784 Jy ! Component: 200 - total flux cleaned = -0.032539 Jy ! Total flux subtracted in 200 components = -0.032539 Jy ! Clean residual min=-0.011237 max=0.014971 Jy/beam ! Clean residual mean=0.000017 rms=0.003392 Jy/beam ! Combined flux in latest and established models = 1.42255 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 94 components and 1.42255 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.086444Jy sigma=0.990731 ! Fit after self-cal, rms=0.086056Jy sigma=0.986755 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.086056Jy sigma=0.986755 ! Fit after self-cal, rms=0.082420Jy sigma=0.926361 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9838 mas, bmaj=3.275 mas, bpa=-15.88 degrees ! Estimated noise=1.02806 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0151642 Jy ! Component: 100 - total flux cleaned = -0.0190356 Jy ! Component: 150 - total flux cleaned = -0.0209104 Jy ! Component: 200 - total flux cleaned = -0.022488 Jy ! Total flux subtracted in 200 components = -0.022488 Jy ! Clean residual min=-0.009055 max=0.011034 Jy/beam ! Clean residual mean=0.000012 rms=0.002555 Jy/beam ! Combined flux in latest and established models = 1.40006 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 107 components and 1.40006 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078549Jy sigma=0.883419 ! Fit after self-cal, rms=0.078406Jy sigma=0.881972 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00190552 Jy ! Component: 100 - total flux cleaned = -0.00292385 Jy ! Component: 150 - total flux cleaned = -0.00396732 Jy ! Component: 200 - total flux cleaned = -0.00471667 Jy ! Total flux subtracted in 200 components = -0.00471667 Jy ! Clean residual min=-0.008238 max=0.011173 Jy/beam ! Clean residual mean=0.000014 rms=0.002484 Jy/beam ! Combined flux in latest and established models = 1.39534 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 117 components and 1.39534 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.077433Jy sigma=0.872860 ! Fit after self-cal, rms=0.077393Jy sigma=0.872497 ! Inverting map ! Added new window around map position (14.2, -9.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00890754 Jy ! Component: 100 - total flux cleaned = 0.010141 Jy ! Component: 150 - total flux cleaned = 0.0101462 Jy ! Component: 200 - total flux cleaned = 0.00962522 Jy ! Total flux subtracted in 200 components = 0.00962522 Jy ! Clean residual min=-0.008052 max=0.010276 Jy/beam ! Clean residual mean=0.000009 rms=0.002309 Jy/beam ! Combined flux in latest and established models = 1.40497 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 145 components and 1.40497 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075750Jy sigma=0.853663 ! Fit after self-cal, rms=0.075689Jy sigma=0.852399 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075689Jy sigma=0.852399 ! Fit after self-cal, rms=0.073157Jy sigma=0.816785 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9853 mas, bmaj=3.275 mas, bpa=-15.86 degrees ! Estimated noise=1.02844 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00862992 Jy ! Component: 100 - total flux cleaned = -0.0109015 Jy ! Component: 150 - total flux cleaned = -0.0114974 Jy ! Component: 200 - total flux cleaned = -0.0115053 Jy ! Total flux subtracted in 200 components = -0.0115053 Jy ! Clean residual min=-0.007341 max=0.008085 Jy/beam ! Clean residual mean=0.000011 rms=0.001897 Jy/beam ! Combined flux in latest and established models = 1.39346 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 158 components and 1.39346 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.071610Jy sigma=0.800435 ! Fit after self-cal, rms=0.071579Jy sigma=0.800022 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000417834 Jy ! Component: 100 - total flux cleaned = -0.000265237 Jy ! Component: 150 - total flux cleaned = -0.000125923 Jy ! Component: 200 - total flux cleaned = -0.000252908 Jy ! Total flux subtracted in 200 components = -0.000252908 Jy ! Clean residual min=-0.006912 max=0.008180 Jy/beam ! Clean residual mean=0.000011 rms=0.001841 Jy/beam ! Combined flux in latest and established models = 1.39321 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 169 components and 1.39321 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.071006Jy sigma=0.794653 ! Fit after self-cal, rms=0.071001Jy sigma=0.794514 ! Inverting map ! Added new window around map position (-14.2, 10.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00691768 Jy ! Component: 100 - total flux cleaned = 0.00750781 Jy ! Component: 150 - total flux cleaned = 0.0076598 Jy ! Component: 200 - total flux cleaned = 0.00821735 Jy ! Total flux subtracted in 200 components = 0.00821735 Jy ! Clean residual min=-0.006536 max=0.005799 Jy/beam ! Clean residual mean=0.000008 rms=0.001690 Jy/beam ! Combined flux in latest and established models = 1.40143 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 205 components and 1.40143 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069912Jy sigma=0.782801 ! Fit after self-cal, rms=0.069822Jy sigma=0.781945 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069822Jy sigma=0.781945 ! Fit after self-cal, rms=0.069339Jy sigma=0.776446 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.315 mas, bmaj=4.425 mas, bpa=3.281 degrees ! Estimated noise=1.24997 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00447664 Jy ! Component: 100 - total flux cleaned = -0.00429704 Jy ! Component: 150 - total flux cleaned = -0.00444636 Jy ! Component: 200 - total flux cleaned = -0.00430893 Jy ! Total flux subtracted in 200 components = -0.00430893 Jy ! Clean residual min=-0.007381 max=0.006173 Jy/beam ! Clean residual mean=0.000011 rms=0.001992 Jy/beam ! Combined flux in latest and established models = 1.39712 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 230 components and 1.39712 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068792Jy sigma=0.771137 ! Fit after self-cal, rms=0.068771Jy sigma=0.770725 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000166164 Jy ! Component: 100 - total flux cleaned = 4.60362e-05 Jy ! Component: 150 - total flux cleaned = 0.000271354 Jy ! Component: 200 - total flux cleaned = 0.000266189 Jy ! Total flux subtracted in 200 components = 0.000266189 Jy ! Clean residual min=-0.007558 max=0.006101 Jy/beam ! Clean residual mean=0.000011 rms=0.001933 Jy/beam ! Combined flux in latest and established models = 1.39738 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 245 components and 1.39738 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068531Jy sigma=0.768904 ! Fit after self-cal, rms=0.068526Jy sigma=0.768802 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.9867 mas, bmaj=3.274 mas, bpa=-15.85 degrees ! Estimated noise=1.02833 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9867 x 3.274 at -15.85 degrees (North through East) ! Clean map min=-0.0078996 max=1.225 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068526Jy sigma=0.768802 ! Fit after self-cal, rms=0.064702Jy sigma=0.708281 ! Inverting map and beam ! Estimated beam: bmin=0.9877 mas, bmaj=3.271 mas, bpa=-15.86 degrees ! Estimated noise=1.02816 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00408876 Jy ! Component: 100 - total flux cleaned = -0.0041011 Jy ! Component: 150 - total flux cleaned = -0.00409479 Jy ! Component: 200 - total flux cleaned = -0.00409523 Jy ! Total flux subtracted in 200 components = -0.00409523 Jy ! Clean residual min=-0.005714 max=0.005335 Jy/beam ! Clean residual mean=0.000008 rms=0.001352 Jy/beam ! Combined flux in latest and established models = 1.39329 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 259 components and 1.39329 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064063Jy sigma=0.701235 ! Fit after self-cal, rms=0.064031Jy sigma=0.700992 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000284099 Jy ! Component: 100 - total flux cleaned = -0.000386126 Jy ! Component: 150 - total flux cleaned = -0.000289734 Jy ! Component: 200 - total flux cleaned = -0.000292966 Jy ! Total flux subtracted in 200 components = -0.000292966 Jy ! Clean residual min=-0.005473 max=0.005062 Jy/beam ! Clean residual mean=0.000008 rms=0.001314 Jy/beam ! Combined flux in latest and established models = 1.393 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 274 components and 1.393 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063716Jy sigma=0.697892 ! Fit after self-cal, rms=0.063699Jy sigma=0.697800 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063699Jy sigma=0.697800 ! Fit after self-cal, rms=0.063498Jy sigma=0.695881 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7401 mas, bmaj=2.96 mas, bpa=-18.26 degrees ! Estimated noise=1.41289 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.963167 Jy ! Component: 100 - total flux cleaned = 1.17668 Jy ! Component: 150 - total flux cleaned = 1.25912 Jy ! Component: 200 - total flux cleaned = 1.30645 Jy ! Total flux subtracted in 200 components = 1.30645 Jy ! Clean residual min=-0.017647 max=0.026078 Jy/beam ! Clean residual mean=0.000026 rms=0.003721 Jy/beam ! Combined flux in latest and established models = 1.30645 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 1.30645 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9884 mas, bmaj=3.27 mas, bpa=-15.85 degrees ! Estimated noise=1.02791 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.030841 Jy ! Component: 100 - total flux cleaned = 0.0476887 Jy ! Component: 150 - total flux cleaned = 0.0530323 Jy ! Component: 200 - total flux cleaned = 0.0563167 Jy ! Total flux subtracted in 200 components = 0.0563167 Jy ! Clean residual min=-0.009416 max=0.010971 Jy/beam ! Clean residual mean=0.000026 rms=0.002104 Jy/beam ! Combined flux in latest and established models = 1.36276 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 55 components and 1.36276 Jy ! Inverting map ! Added new window around map position (-9.8, 15.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00461409 Jy ! Component: 100 - total flux cleaned = 0.00728639 Jy ! Component: 150 - total flux cleaned = 0.00901084 Jy ! Component: 200 - total flux cleaned = 0.0106074 Jy ! Total flux subtracted in 200 components = 0.0106074 Jy ! Clean residual min=-0.007758 max=0.007734 Jy/beam ! Clean residual mean=0.000018 rms=0.001786 Jy/beam ! Combined flux in latest and established models = 1.37337 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 77 components and 1.37337 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.318 mas, bmaj=4.423 mas, bpa=3.434 degrees ! Estimated noise=1.24776 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00776645 Jy ! Component: 100 - total flux cleaned = 0.0114793 Jy ! Component: 150 - total flux cleaned = 0.0124399 Jy ! Component: 200 - total flux cleaned = 0.0129619 Jy ! Total flux subtracted in 200 components = 0.0129619 Jy ! Clean residual min=-0.005697 max=0.007074 Jy/beam ! Clean residual mean=0.000015 rms=0.001788 Jy/beam ! Combined flux in latest and established models = 1.38633 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000483069 Jy ! Component: 100 - total flux cleaned = 0.000937107 Jy ! Component: 150 - total flux cleaned = 0.0013597 Jy ! Component: 200 - total flux cleaned = 0.00162285 Jy ! Total flux subtracted in 200 components = 0.00162285 Jy ! Clean residual min=-0.005514 max=0.006349 Jy/beam ! Clean residual mean=0.000013 rms=0.001681 Jy/beam ! Combined flux in latest and established models = 1.38795 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 125 components and 1.38795 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9884 mas, bmaj=3.27 mas, bpa=-15.85 degrees ! Estimated noise=1.02791 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000908063 Jy ! Component: 100 - total flux cleaned = -0.000670686 Jy ! Component: 150 - total flux cleaned = -0.00111786 Jy ! Component: 200 - total flux cleaned = -0.000913543 Jy ! Total flux subtracted in 200 components = -0.000913543 Jy ! Clean residual min=-0.005926 max=0.006033 Jy/beam ! Clean residual mean=0.000008 rms=0.001444 Jy/beam ! Combined flux in latest and established models = 1.38704 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 135 components and 1.38704 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066077Jy sigma=0.731071 ! Fit after self-cal, rms=0.065827Jy sigma=0.726530 wmodel J2000-1748_X_b_map.mod ! Writing 135 model components to file: J2000-1748_X_b_map.mod wobs J2000-1748_X_b_uvs.fits ! Writing UV FITS file: J2000-1748_X_b_uvs.fits wwins J2000-1748_X_b_map.win ! wwins: Wrote 7 windows to J2000-1748_X_b_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -1.47823e-05 Jy ! Component: 100 - total flux cleaned = -0.000116927 Jy ! Component: 150 - total flux cleaned = -0.00100755 Jy ! Component: 200 - total flux cleaned = -0.00167605 Jy ! Component: 250 - total flux cleaned = -0.00241885 Jy ! Component: 300 - total flux cleaned = -0.00313691 Jy ! Component: 350 - total flux cleaned = -0.00392088 Jy ! Component: 400 - total flux cleaned = -0.00485023 Jy ! Component: 450 - total flux cleaned = -0.00542511 Jy ! Component: 500 - total flux cleaned = -0.0062313 Jy ! Component: 550 - total flux cleaned = -0.00709362 Jy ! Component: 600 - total flux cleaned = -0.00770796 Jy ! Component: 650 - total flux cleaned = -0.00823331 Jy ! Component: 700 - total flux cleaned = -0.00867589 Jy ! Component: 750 - total flux cleaned = -0.00910787 Jy ! Component: 800 - total flux cleaned = -0.00946197 Jy ! Component: 850 - total flux cleaned = -0.00987829 Jy ! Component: 900 - total flux cleaned = -0.0103553 Jy ! Component: 950 - total flux cleaned = -0.0108894 Jy ! Component: 1000 - total flux cleaned = -0.0110212 Jy ! Component: 1050 - total flux cleaned = -0.0112811 Jy ! Component: 1100 - total flux cleaned = -0.0114724 Jy ! Component: 1150 - total flux cleaned = -0.0118488 Jy ! Component: 1200 - total flux cleaned = -0.0121595 Jy ! Component: 1250 - total flux cleaned = -0.0125249 Jy ! Component: 1300 - total flux cleaned = -0.0128235 Jy ! Component: 1350 - total flux cleaned = -0.0130004 Jy ! Component: 1400 - total flux cleaned = -0.0133493 Jy ! Component: 1450 - total flux cleaned = -0.0135781 Jy ! Component: 1500 - total flux cleaned = -0.013635 Jy ! Component: 1550 - total flux cleaned = -0.0140825 Jy ! Component: 1600 - total flux cleaned = -0.0144678 Jy ! Component: 1650 - total flux cleaned = -0.0146838 Jy ! Component: 1700 - total flux cleaned = -0.0149516 Jy ! Component: 1750 - total flux cleaned = -0.015111 Jy ! Component: 1800 - total flux cleaned = -0.0156339 Jy ! Component: 1850 - total flux cleaned = -0.0156855 Jy ! Component: 1900 - total flux cleaned = -0.0161444 Jy ! Component: 1950 - total flux cleaned = -0.0163969 Jy ! Component: 2000 - total flux cleaned = -0.0167953 Jy ! Component: 2050 - total flux cleaned = -0.0170412 Jy ! Component: 2100 - total flux cleaned = -0.0175285 Jy ! Component: 2150 - total flux cleaned = -0.0178642 Jy ! Component: 2200 - total flux cleaned = -0.0183864 Jy ! Component: 2250 - total flux cleaned = -0.0182928 Jy ! Component: 2300 - total flux cleaned = -0.0185264 Jy ! Component: 2350 - total flux cleaned = -0.019125 Jy ! Component: 2400 - total flux cleaned = -0.0191249 Jy ! Component: 2450 - total flux cleaned = -0.0195308 Jy ! Component: 2500 - total flux cleaned = -0.0197529 Jy ! Component: 2550 - total flux cleaned = -0.0199735 Jy ! Component: 2600 - total flux cleaned = -0.0202358 Jy ! Component: 2650 - total flux cleaned = -0.0204091 Jy ! Component: 2700 - total flux cleaned = -0.0207506 Jy ! Component: 2750 - total flux cleaned = -0.0208351 Jy ! Component: 2800 - total flux cleaned = -0.0210864 Jy ! Component: 2850 - total flux cleaned = -0.0212109 Jy ! Component: 2900 - total flux cleaned = -0.021416 Jy ! Component: 2950 - total flux cleaned = -0.021538 Jy ! Component: 3000 - total flux cleaned = -0.0219407 Jy ! Component: 3050 - total flux cleaned = -0.0220203 Jy ! Component: 3100 - total flux cleaned = -0.0222973 Jy ! Component: 3150 - total flux cleaned = -0.0225324 Jy ! Component: 3200 - total flux cleaned = -0.0226877 Jy ! Component: 3250 - total flux cleaned = -0.0228038 Jy ! Component: 3300 - total flux cleaned = -0.0229949 Jy ! Component: 3350 - total flux cleaned = -0.0231462 Jy ! Component: 3400 - total flux cleaned = -0.0232958 Jy ! Component: 3450 - total flux cleaned = -0.0235926 Jy ! Component: 3500 - total flux cleaned = -0.0237399 Jy ! Component: 3550 - total flux cleaned = -0.0239585 Jy ! Component: 3600 - total flux cleaned = -0.0242118 Jy ! Component: 3650 - total flux cleaned = -0.0244983 Jy ! Component: 3700 - total flux cleaned = -0.0246045 Jy ! Component: 3750 - total flux cleaned = -0.0248506 Jy ! Component: 3800 - total flux cleaned = -0.0248503 Jy ! Component: 3850 - total flux cleaned = -0.0250578 Jy ! Component: 3900 - total flux cleaned = -0.0252984 Jy ! Component: 3950 - total flux cleaned = -0.0254346 Jy ! Component: 4000 - total flux cleaned = -0.0257374 Jy ! Component: 4050 - total flux cleaned = -0.0258709 Jy ! Total flux subtracted in 4096 components = -0.0259038 Jy ! Clean residual min=-0.001682 max=0.001847 Jy/beam ! Clean residual mean=0.000004 rms=0.000608 Jy/beam ! Combined flux in latest and established models = 1.36114 Jy keep ! Adding 265 model components to the UV plane model. ! The established model now contains 400 components and 1.36114 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uvm//J2000-1748_X_b_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9884 x 3.27 at -15.85 degrees (North through East) ! Clean map min=-0.0089155 max=1.2283 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uvm//J2000-1748_X_b_map.fits wmodel /vlbi/uf001/uvm//J2000-1748_X_b_map.mod ! Writing 400 model components to file: /vlbi/uf001/uvm//J2000-1748_X_b_map.mod wobs /vlbi/uf001/uvm//J2000-1748_X_b_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uvm//J2000-1748_X_b_uvs.fits wwins /vlbi/uf001/uvm//J2000-1748_X_b_map.win ! wwins: Wrote 8 windows to /vlbi/uf001/uvm//J2000-1748_X_b_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 1.22834 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000611702 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.149397 0.149397 0.298794 0.597589 1.19518 2.39035 4.78071 9.56142 19.1228 38.2457 76.4913 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0018 print "peak= ", int(1000*peak_flux)/1000 ! peak= 1.228 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 2008.07 quit ! Quitting program ! Log file /vlbi/uf001/uvm//J2000-1748_X_b_dfm.log closed on Sun Jan 13 22:25:42 2019