! Started logfile: /vlbi/uf001/uva//J1949+2421_S_dfm.log on Mon Jan 14 05:15:06 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J1949+2421_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J1949+2421_S_uva.fits
! AN table 1: 57 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.97076 visibilities/baseline/integration-bin.
! Found source: J1949+2421
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 5976 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1949+2421_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 7 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 7 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 7 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.008979Jy  sigma=25.012325
! Fit after  self-cal, rms=0.883667Jy  sigma=21.879137
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.02 mas, bmaj=7.31 mas, bpa=18.9 degrees
! Estimated noise=0.493687 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0867026 Jy
! Component: 100  -  total flux cleaned = 0.122193 Jy
! Total flux subtracted in 100 components = 0.122193 Jy
! Clean residual min=-0.007622 max=0.017715 Jy/beam
! Clean residual mean=0.000048 rms=0.002632 Jy/beam
! Combined flux in latest and established models = 0.122193 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 27 components and 0.122193 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.072695Jy  sigma=1.713344
! Fit after  self-cal, rms=0.072524Jy  sigma=1.709361
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0218368 Jy
! Component: 100  -  total flux cleaned = 0.0365394 Jy
! Total flux subtracted in 100 components = 0.0365394 Jy
! Clean residual min=-0.005218 max=0.014790 Jy/beam
! Clean residual mean=0.000032 rms=0.001852 Jy/beam
! Combined flux in latest and established models = 0.158732 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 55 components and 0.158732 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063133Jy  sigma=1.473939
! Fit after  self-cal, rms=0.063098Jy  sigma=1.473165
! Inverting map 
! Added new window around map position (8.5, 4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0140535 Jy
! Component: 100  -  total flux cleaned = 0.0233608 Jy
! Total flux subtracted in 100 components = 0.0233608 Jy
! Clean residual min=-0.004122 max=0.007691 Jy/beam
! Clean residual mean=0.000021 rms=0.001345 Jy/beam
! Combined flux in latest and established models = 0.182093 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 80 components and 0.182093 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058888Jy  sigma=1.368577
! Fit after  self-cal, rms=0.058698Jy  sigma=1.363993
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.632 mas, bmaj=7.81 mas, bpa=15.77 degrees
! Estimated noise=0.380342 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (15.5, 5.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0108977 Jy
! Component: 100  -  total flux cleaned = 0.0185153 Jy
! Component: 150  -  total flux cleaned = 0.0242367 Jy
! Component: 200  -  total flux cleaned = 0.028702 Jy
! Total flux subtracted in 200 components = 0.028702 Jy
! Clean residual min=-0.003641 max=0.005092 Jy/beam
! Clean residual mean=0.000003 rms=0.000989 Jy/beam
! Combined flux in latest and established models = 0.210795 Jy
! Performing phase self-cal
! Adding 66 model components to the UV plane model.
! The established model now contains 130 components and 0.210795 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.055953Jy  sigma=1.294737
! Fit after  self-cal, rms=0.055774Jy  sigma=1.290822
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.632 x 7.81 at 15.77 degrees (North through East)
! Clean map  min=-0.0033489  max=0.11501 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.95     HN        1.03     KP        1.04     
!   LA        0.94     NL        1.04     OV        1.02     PT        0.94     
!   SC        1.08     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        0.96     HN        1.02     KP        1.04     
!   LA        0.94     NL        1.05     OV        0.94     PT        0.95     
!   SC        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.97     HN        1.03     KP        1.00     
!   LA        0.92     NL        1.08     OV        0.99     PT        0.94     
!   SC        1.02     
! 
! 
! Fit before self-cal, rms=0.055774Jy  sigma=1.290822
! Fit after  self-cal, rms=0.054683Jy  sigma=1.269828
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.679 mas, bmaj=7.894 mas, bpa=15.61 degrees
! Estimated noise=0.377877 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00275934 Jy
! Component: 100  -  total flux cleaned = 0.00317616 Jy
! Component: 150  -  total flux cleaned = 0.0032901 Jy
! Component: 200  -  total flux cleaned = 0.00320043 Jy
! Total flux subtracted in 200 components = 0.00320043 Jy
! Clean residual min=-0.002433 max=0.002624 Jy/beam
! Clean residual mean=-0.000002 rms=0.000639 Jy/beam
! Combined flux in latest and established models = 0.213996 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 163 components and 0.213996 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.054500Jy  sigma=1.264767
! Fit after  self-cal, rms=0.054483Jy  sigma=1.264193
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.054483Jy  sigma=1.264193
! Fit after  self-cal, rms=0.053726Jy  sigma=1.251739
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.655 mas, bmaj=7.9 mas, bpa=15.6 degrees
! Estimated noise=0.378145 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000855904 Jy
! Component: 100  -  total flux cleaned = 0.00115559 Jy
! Component: 150  -  total flux cleaned = 0.00124934 Jy
! Component: 200  -  total flux cleaned = 0.00130388 Jy
! Total flux subtracted in 200 components = 0.00130388 Jy
! Clean residual min=-0.001770 max=0.002336 Jy/beam
! Clean residual mean=-0.000002 rms=0.000512 Jy/beam
! Combined flux in latest and established models = 0.215299 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 183 components and 0.215299 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.053684Jy  sigma=1.250501
! Fit after  self-cal, rms=0.053681Jy  sigma=1.250357
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (36.5, 2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00242641 Jy
! Component: 100  -  total flux cleaned = 0.00387558 Jy
! Component: 150  -  total flux cleaned = 0.00490617 Jy
! Component: 200  -  total flux cleaned = 0.00554265 Jy
! Total flux subtracted in 200 components = 0.00554265 Jy
! Clean residual min=-0.001573 max=0.001734 Jy/beam
! Clean residual mean=-0.000005 rms=0.000443 Jy/beam
! Combined flux in latest and established models = 0.220842 Jy
! Performing phase self-cal
! Adding 41 model components to the UV plane model.
! The established model now contains 224 components and 0.220842 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.053553Jy  sigma=1.247196
! Fit after  self-cal, rms=0.053545Jy  sigma=1.246962
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.053545Jy  sigma=1.246962
! Fit after  self-cal, rms=0.053314Jy  sigma=1.246544
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.65 mas, bmaj=7.903 mas, bpa=15.63 degrees
! Estimated noise=0.376684 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000898243 Jy
! Component: 100  -  total flux cleaned = 0.00158231 Jy
! Component: 150  -  total flux cleaned = 0.00200258 Jy
! Component: 200  -  total flux cleaned = 0.00220429 Jy
! Total flux subtracted in 200 components = 0.00220429 Jy
! Clean residual min=-0.001465 max=0.001731 Jy/beam
! Clean residual mean=-0.000005 rms=0.000416 Jy/beam
! Combined flux in latest and established models = 0.223046 Jy
selfcal
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 248 components and 0.223046 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.053280Jy  sigma=1.245668
! Fit after  self-cal, rms=0.053277Jy  sigma=1.245608
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000497664 Jy
! Component: 100  -  total flux cleaned = 0.000709206 Jy
! Component: 150  -  total flux cleaned = 0.000839486 Jy
! Component: 200  -  total flux cleaned = 0.000961808 Jy
! Total flux subtracted in 200 components = 0.000961808 Jy
! Clean residual min=-0.001437 max=0.001663 Jy/beam
! Clean residual mean=-0.000005 rms=0.000408 Jy/beam
! Combined flux in latest and established models = 0.224008 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 254 components and 0.224008 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.053260Jy  sigma=1.245147
! Fit after  self-cal, rms=0.053259Jy  sigma=1.245125
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.053259Jy  sigma=1.245125
! Fit after  self-cal, rms=0.053175Jy  sigma=1.245045
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.908 mas, bmaj=10.28 mas, bpa=-2.578 degrees
! Estimated noise=0.429784 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000894565 Jy
! Component: 100  -  total flux cleaned = 0.0013955 Jy
! Component: 150  -  total flux cleaned = 0.00167557 Jy
! Component: 200  -  total flux cleaned = 0.00179708 Jy
! Total flux subtracted in 200 components = 0.00179708 Jy
! Clean residual min=-0.001928 max=0.001860 Jy/beam
! Clean residual mean=-0.000010 rms=0.000473 Jy/beam
! Combined flux in latest and established models = 0.225805 Jy
selfcal
! Performing phase self-cal
! Adding 52 model components to the UV plane model.
! The established model now contains 298 components and 0.225805 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.053164Jy  sigma=1.244707
! Fit after  self-cal, rms=0.053161Jy  sigma=1.244661
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000337725 Jy
! Component: 100  -  total flux cleaned = 0.000509626 Jy
! Component: 150  -  total flux cleaned = 0.000570613 Jy
! Component: 200  -  total flux cleaned = 0.00061284 Jy
! Total flux subtracted in 200 components = 0.00061284 Jy
! Clean residual min=-0.001885 max=0.001833 Jy/beam
! Clean residual mean=-0.000010 rms=0.000468 Jy/beam
! Combined flux in latest and established models = 0.226418 Jy
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 313 components and 0.226418 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.053155Jy  sigma=1.244450
! Fit after  self-cal, rms=0.053154Jy  sigma=1.244430
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.648 mas, bmaj=7.9 mas, bpa=15.68 degrees
! Estimated noise=0.376249 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.648 x 7.9 at 15.68 degrees (North through East)
! Clean map  min=-0.0014255  max=0.11273 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.02 mas, bmaj=7.388 mas, bpa=18.82 degrees
! Estimated noise=0.491829 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0860531 Jy
! Component: 100  -  total flux cleaned = 0.120828 Jy
! Component: 150  -  total flux cleaned = 0.142145 Jy
! Component: 200  -  total flux cleaned = 0.157499 Jy
! Total flux subtracted in 200 components = 0.157499 Jy
! Clean residual min=-0.004640 max=0.008862 Jy/beam
! Clean residual mean=0.000026 rms=0.001556 Jy/beam
! Combined flux in latest and established models = 0.157499 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 56 model components to the UV plane model.
! The established model now contains 56 components and 0.157499 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.648 mas, bmaj=7.9 mas, bpa=15.68 degrees
! Estimated noise=0.376249 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0149746 Jy
! Component: 100  -  total flux cleaned = 0.0255673 Jy
! Component: 150  -  total flux cleaned = 0.03328 Jy
! Component: 200  -  total flux cleaned = 0.0390124 Jy
! Total flux subtracted in 200 components = 0.0390124 Jy
! Clean residual min=-0.002331 max=0.003476 Jy/beam
! Clean residual mean=0.000005 rms=0.000814 Jy/beam
! Combined flux in latest and established models = 0.196512 Jy
! Adding 66 model components to the UV plane model.
! The established model now contains 108 components and 0.196512 Jy
! Inverting map 
! Added new window around map position (-5, -1.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00443753 Jy
! Component: 100  -  total flux cleaned = 0.00803591 Jy
! Component: 150  -  total flux cleaned = 0.0110698 Jy
! Component: 200  -  total flux cleaned = 0.0136431 Jy
! Total flux subtracted in 200 components = 0.0136431 Jy
! Clean residual min=-0.001978 max=0.001964 Jy/beam
! Clean residual mean=0.000001 rms=0.000554 Jy/beam
! Combined flux in latest and established models = 0.210155 Jy
! Adding 55 model components to the UV plane model.
! The established model now contains 153 components and 0.210155 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.908 mas, bmaj=10.28 mas, bpa=-2.578 degrees
! Estimated noise=0.429784 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0032928 Jy
! Component: 100  -  total flux cleaned = 0.00571583 Jy
! Component: 150  -  total flux cleaned = 0.00762693 Jy
! Component: 200  -  total flux cleaned = 0.00919471 Jy
! Total flux subtracted in 200 components = 0.00919471 Jy
! Clean residual min=-0.002054 max=0.001805 Jy/beam
! Clean residual mean=-0.000007 rms=0.000549 Jy/beam
! Combined flux in latest and established models = 0.21935 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00131672 Jy
! Component: 100  -  total flux cleaned = 0.00244058 Jy
! Component: 150  -  total flux cleaned = 0.00340696 Jy
! Component: 200  -  total flux cleaned = 0.0042417 Jy
! Total flux subtracted in 200 components = 0.0042417 Jy
! Clean residual min=-0.001893 max=0.001669 Jy/beam
! Clean residual mean=-0.000009 rms=0.000493 Jy/beam
! Combined flux in latest and established models = 0.223591 Jy
! Adding 151 model components to the UV plane model.
! The established model now contains 286 components and 0.223591 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.648 mas, bmaj=7.9 mas, bpa=15.68 degrees
! Estimated noise=0.376249 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000445433 Jy
! Component: 100  -  total flux cleaned = 0.0007148 Jy
! Component: 150  -  total flux cleaned = 0.000899631 Jy
! Component: 200  -  total flux cleaned = 0.00110102 Jy
! Total flux subtracted in 200 components = 0.00110102 Jy
! Clean residual min=-0.001604 max=0.001687 Jy/beam
! Clean residual mean=-0.000005 rms=0.000403 Jy/beam
! Combined flux in latest and established models = 0.224692 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 314 components and 0.224692 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.053186Jy  sigma=1.245222
! Fit after  self-cal, rms=0.053177Jy  sigma=1.245097
wmodel J1949+2421_S_map.mod
! Writing 314 model components to file: J1949+2421_S_map.mod
wobs   J1949+2421_S_uvs.fits
! Writing UV FITS file: J1949+2421_S_uvs.fits
wwins  J1949+2421_S_map.win
! wwins: Wrote 5 windows to J1949+2421_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000228942 Jy
! Component: 100  -  total flux cleaned = 4.40592e-05 Jy
! Component: 150  -  total flux cleaned = -0.000132246 Jy
! Component: 200  -  total flux cleaned = -0.0003014 Jy
! Component: 250  -  total flux cleaned = -0.000325195 Jy
! Component: 300  -  total flux cleaned = -0.000416202 Jy
! Component: 350  -  total flux cleaned = -0.000460317 Jy
! Component: 400  -  total flux cleaned = -0.00054578 Jy
! Component: 450  -  total flux cleaned = -0.000504013 Jy
! Component: 500  -  total flux cleaned = -0.000483595 Jy
! Component: 550  -  total flux cleaned = -0.000383793 Jy
! Component: 600  -  total flux cleaned = -0.000325588 Jy
! Component: 650  -  total flux cleaned = -0.000248951 Jy
! Component: 700  -  total flux cleaned = -0.000192373 Jy
! Component: 750  -  total flux cleaned = -9.96711e-05 Jy
! Component: 800  -  total flux cleaned = 2.79026e-05 Jy
! Component: 850  -  total flux cleaned = 0.000117549 Jy
! Component: 900  -  total flux cleaned = 0.000258842 Jy
! Component: 950  -  total flux cleaned = 0.000258753 Jy
! Component: 1000  -  total flux cleaned = 0.000378576 Jy
! Component: 1050  -  total flux cleaned = 0.00042881 Jy
! Component: 1100  -  total flux cleaned = 0.000478481 Jy
! Component: 1150  -  total flux cleaned = 0.000511392 Jy
! Component: 1200  -  total flux cleaned = 0.00055988 Jy
! Component: 1250  -  total flux cleaned = 0.00059187 Jy
! Component: 1300  -  total flux cleaned = 0.000576266 Jy
! Component: 1350  -  total flux cleaned = 0.000623067 Jy
! Component: 1400  -  total flux cleaned = 0.000653822 Jy
! Component: 1450  -  total flux cleaned = 0.000669159 Jy
! Component: 1500  -  total flux cleaned = 0.000773834 Jy
! Component: 1550  -  total flux cleaned = 0.000685053 Jy
! Component: 1600  -  total flux cleaned = 0.000728629 Jy
! Component: 1650  -  total flux cleaned = 0.000728646 Jy
! Component: 1700  -  total flux cleaned = 0.000714264 Jy
! Component: 1750  -  total flux cleaned = 0.000672168 Jy
! Component: 1800  -  total flux cleaned = 0.000700186 Jy
! Component: 1850  -  total flux cleaned = 0.000741567 Jy
! Component: 1900  -  total flux cleaned = 0.0007141 Jy
! Component: 1950  -  total flux cleaned = 0.000714058 Jy
! Component: 2000  -  total flux cleaned = 0.000727571 Jy
! Component: 2050  -  total flux cleaned = 0.00072727 Jy
! Component: 2100  -  total flux cleaned = 0.000727098 Jy
! Component: 2150  -  total flux cleaned = 0.000701177 Jy
! Component: 2200  -  total flux cleaned = 0.000713771 Jy
! Component: 2250  -  total flux cleaned = 0.000713629 Jy
! Component: 2300  -  total flux cleaned = 0.000700994 Jy
! Component: 2350  -  total flux cleaned = 0.000676041 Jy
! Component: 2400  -  total flux cleaned = 0.000688322 Jy
! Component: 2450  -  total flux cleaned = 0.000614929 Jy
! Component: 2500  -  total flux cleaned = 0.000651242 Jy
! Component: 2550  -  total flux cleaned = 0.000639209 Jy
! Component: 2600  -  total flux cleaned = 0.000603443 Jy
! Component: 2650  -  total flux cleaned = 0.000627076 Jy
! Component: 2700  -  total flux cleaned = 0.000638926 Jy
! Component: 2750  -  total flux cleaned = 0.000638885 Jy
! Component: 2800  -  total flux cleaned = 0.000673599 Jy
! Component: 2850  -  total flux cleaned = 0.000673639 Jy
! Component: 2900  -  total flux cleaned = 0.000707973 Jy
! Component: 2950  -  total flux cleaned = 0.000753 Jy
! Component: 3000  -  total flux cleaned = 0.000775472 Jy
! Component: 3050  -  total flux cleaned = 0.000808863 Jy
! Component: 3100  -  total flux cleaned = 0.000885977 Jy
! Component: 3150  -  total flux cleaned = 0.000875012 Jy
! Component: 3200  -  total flux cleaned = 0.00089684 Jy
! Component: 3250  -  total flux cleaned = 0.000907578 Jy
! Component: 3300  -  total flux cleaned = 0.000961091 Jy
! Component: 3350  -  total flux cleaned = 0.000908007 Jy
! Component: 3400  -  total flux cleaned = 0.0010133 Jy
! Component: 3450  -  total flux cleaned = 0.00097142 Jy
! Component: 3500  -  total flux cleaned = 0.00101301 Jy
! Component: 3550  -  total flux cleaned = 0.00102323 Jy
! Component: 3600  -  total flux cleaned = 0.00104368 Jy
! Component: 3650  -  total flux cleaned = 0.00105378 Jy
! Component: 3700  -  total flux cleaned = 0.00105381 Jy
! Component: 3750  -  total flux cleaned = 0.001104 Jy
! Component: 3800  -  total flux cleaned = 0.00111389 Jy
! Component: 3850  -  total flux cleaned = 0.00111387 Jy
! Component: 3900  -  total flux cleaned = 0.00109422 Jy
! Component: 3950  -  total flux cleaned = 0.00117234 Jy
! Component: 4000  -  total flux cleaned = 0.00116254 Jy
! Component: 4050  -  total flux cleaned = 0.00119143 Jy
! Total flux subtracted in 4096 components = 0.00121053 Jy
! Clean residual min=-0.000616 max=0.000685 Jy/beam
! Clean residual mean=-0.000001 rms=0.000183 Jy/beam
! Combined flux in latest and established models = 0.225903 Jy
keep
! Adding 295 model components to the UV plane model.
! The established model now contains 609 components and 0.225903 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J1949+2421_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.648 x 7.9 at 15.68 degrees (North through East)
! Clean map  min=-0.0011748  max=0.11264 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J1949+2421_S_map.fits
wmodel /vlbi/uf001/uva//J1949+2421_S_map.mod
! Writing 609 model components to file: /vlbi/uf001/uva//J1949+2421_S_map.mod
wobs   /vlbi/uf001/uva//J1949+2421_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J1949+2421_S_uvs.fits
wwins  /vlbi/uf001/uva//J1949+2421_S_map.win
! wwins: Wrote 6 windows to /vlbi/uf001/uva//J1949+2421_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.112642 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000180281 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.480144 0.480144 0.960287 1.92057 3.84115 7.6823 15.3646 30.7292 61.4584
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0005 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.112 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  624.813 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J1949+2421_S_dfm.log closed on Mon Jan 14 05:15:10 2019