! Started logfile: /vlbi/uf001/uva//J1929+0910_S_dfm.log on Mon Jan 14 05:05:59 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J1929+0910_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J1929+0910_S_uva.fits
! AN table 1: 111 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.854655 visibilities/baseline/integration-bin.
! Found source: J1929+0910
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 12807 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1929+0910_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 110 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 110 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 110 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.008079Jy  sigma=22.241431
! Fit after  self-cal, rms=0.905793Jy  sigma=19.929250
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.865 mas, bmaj=6.768 mas, bpa=-5.625 degrees
! Estimated noise=0.443053 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0728244 Jy
! Component: 100  -  total flux cleaned = 0.0934936 Jy
! Total flux subtracted in 100 components = 0.0934936 Jy
! Clean residual min=-0.003869 max=0.008519 Jy/beam
! Clean residual mean=-0.000035 rms=0.001152 Jy/beam
! Combined flux in latest and established models = 0.0934936 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.0934936 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061952Jy  sigma=1.277384
! Fit after  self-cal, rms=0.061902Jy  sigma=1.275957
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00940957 Jy
! Component: 100  -  total flux cleaned = 0.0147436 Jy
! Total flux subtracted in 100 components = 0.0147436 Jy
! Clean residual min=-0.003233 max=0.004895 Jy/beam
! Clean residual mean=-0.000012 rms=0.000804 Jy/beam
! Combined flux in latest and established models = 0.108237 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 25 components and 0.108237 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060549Jy  sigma=1.237542
! Fit after  self-cal, rms=0.060541Jy  sigma=1.237241
! Inverting map 
! Added new window around map position (-4.5, 9).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00443166 Jy
! Component: 100  -  total flux cleaned = 0.00720455 Jy
! Total flux subtracted in 100 components = 0.00720455 Jy
! Clean residual min=-0.002962 max=0.002691 Jy/beam
! Clean residual mean=-0.000002 rms=0.000701 Jy/beam
! Combined flux in latest and established models = 0.115442 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 39 components and 0.115442 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060241Jy  sigma=1.229025
! Fit after  self-cal, rms=0.060232Jy  sigma=1.228672
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.333 mas, bmaj=7.578 mas, bpa=-5.089 degrees
! Estimated noise=0.293055 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00251452 Jy
! Component: 100  -  total flux cleaned = 0.00406538 Jy
! Component: 150  -  total flux cleaned = 0.00521873 Jy
! Component: 200  -  total flux cleaned = 0.0060889 Jy
! Total flux subtracted in 200 components = 0.0060889 Jy
! Clean residual min=-0.002680 max=0.002226 Jy/beam
! Clean residual mean=0.000017 rms=0.000603 Jy/beam
! Combined flux in latest and established models = 0.121531 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 64 components and 0.121531 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060112Jy  sigma=1.225695
! Fit after  self-cal, rms=0.060107Jy  sigma=1.225457
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.333 x 7.578 at -5.089 degrees (North through East)
! Clean map  min=-0.0026609  max=0.093171 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.07     KP        0.99     
!   LA        0.93     MK        0.99     NL        0.99     OV        0.99     
!   PT        0.99     SC        1.05     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.00     HN        1.04     KP        0.99     
!   LA        0.92     MK        1.03     NL        1.03     OV        0.99     
!   PT        0.99     SC        0.98     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.98     HN        1.03     KP        1.01     
!   LA        0.94     MK        1.01     NL        1.06     OV        1.02     
!   PT        0.98     SC        0.97     
! 
! 
! Fit before self-cal, rms=0.060107Jy  sigma=1.225457
! Fit after  self-cal, rms=0.059519Jy  sigma=1.220983
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.359 mas, bmaj=7.603 mas, bpa=-4.786 degrees
! Estimated noise=0.291174 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00122057 Jy
! Component: 100  -  total flux cleaned = -0.00153457 Jy
! Component: 150  -  total flux cleaned = -0.00167582 Jy
! Component: 200  -  total flux cleaned = -0.00176911 Jy
! Total flux subtracted in 200 components = -0.00176911 Jy
! Clean residual min=-0.002328 max=0.002006 Jy/beam
! Clean residual mean=0.000025 rms=0.000519 Jy/beam
! Combined flux in latest and established models = 0.119762 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 80 components and 0.119762 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059474Jy  sigma=1.220478
! Fit after  self-cal, rms=0.059468Jy  sigma=1.220372
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059468Jy  sigma=1.220372
! Fit after  self-cal, rms=0.062220Jy  sigma=1.211465
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.368 mas, bmaj=7.618 mas, bpa=-4.642 degrees
! Estimated noise=0.292252 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.53234e-05 Jy
! Component: 100  -  total flux cleaned = -6.05195e-05 Jy
! Component: 150  -  total flux cleaned = -0.000101528 Jy
! Component: 200  -  total flux cleaned = -0.000150975 Jy
! Total flux subtracted in 200 components = -0.000150975 Jy
! Clean residual min=-0.001518 max=0.001641 Jy/beam
! Clean residual mean=0.000006 rms=0.000379 Jy/beam
! Combined flux in latest and established models = 0.119611 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 98 components and 0.119611 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062200Jy  sigma=1.210922
! Fit after  self-cal, rms=0.062246Jy  sigma=1.210751
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (6.5, -31).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00112208 Jy
! Component: 100  -  total flux cleaned = 0.00140827 Jy
! Component: 150  -  total flux cleaned = 0.00153355 Jy
! Component: 200  -  total flux cleaned = 0.00158842 Jy
! Total flux subtracted in 200 components = 0.00158842 Jy
! Clean residual min=-0.001495 max=0.001333 Jy/beam
! Clean residual mean=0.000006 rms=0.000362 Jy/beam
! Combined flux in latest and established models = 0.121199 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 122 components and 0.121199 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062216Jy  sigma=1.209932
! Fit after  self-cal, rms=0.062214Jy  sigma=1.209895
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062214Jy  sigma=1.209895
! Fit after  self-cal, rms=0.062279Jy  sigma=1.208603
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.365 mas, bmaj=7.617 mas, bpa=-4.613 degrees
! Estimated noise=0.291733 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000188144 Jy
! Component: 100  -  total flux cleaned = 0.000188362 Jy
! Component: 150  -  total flux cleaned = 0.000188927 Jy
! Component: 200  -  total flux cleaned = 0.000175159 Jy
! Total flux subtracted in 200 components = 0.000175159 Jy
! Clean residual min=-0.001283 max=0.001346 Jy/beam
! Clean residual mean=0.000007 rms=0.000334 Jy/beam
! Combined flux in latest and established models = 0.121374 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 136 components and 0.121374 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062270Jy  sigma=1.208405
! Fit after  self-cal, rms=0.062274Jy  sigma=1.208376
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.4952e-05 Jy
! Component: 100  -  total flux cleaned = -2.86326e-05 Jy
! Component: 150  -  total flux cleaned = -2.867e-05 Jy
! Component: 200  -  total flux cleaned = -2.87273e-05 Jy
! Total flux subtracted in 200 components = -2.87273e-05 Jy
! Clean residual min=-0.001280 max=0.001346 Jy/beam
! Clean residual mean=0.000006 rms=0.000332 Jy/beam
! Combined flux in latest and established models = 0.121345 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 148 components and 0.121345 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062269Jy  sigma=1.208263
! Fit after  self-cal, rms=0.062269Jy  sigma=1.208259
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062269Jy  sigma=1.208259
! Fit after  self-cal, rms=0.062296Jy  sigma=1.208239
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.605 mas, bmaj=11.28 mas, bpa=-3.551 degrees
! Estimated noise=0.370352 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.48901e-07 Jy
! Component: 100  -  total flux cleaned = 1.32344e-05 Jy
! Component: 150  -  total flux cleaned = 2.41647e-05 Jy
! Component: 200  -  total flux cleaned = -4.37675e-06 Jy
! Total flux subtracted in 200 components = -4.37675e-06 Jy
! Clean residual min=-0.001357 max=0.001408 Jy/beam
! Clean residual mean=0.000014 rms=0.000383 Jy/beam
! Combined flux in latest and established models = 0.121341 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 162 components and 0.121341 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062295Jy  sigma=1.208235
! Fit after  self-cal, rms=0.062294Jy  sigma=1.208216
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.78555e-05 Jy
! Component: 100  -  total flux cleaned = 1.37865e-06 Jy
! Component: 150  -  total flux cleaned = 1.72843e-06 Jy
! Component: 200  -  total flux cleaned = -5.24502e-06 Jy
! Total flux subtracted in 200 components = -5.24502e-06 Jy
! Clean residual min=-0.001361 max=0.001418 Jy/beam
! Clean residual mean=0.000014 rms=0.000383 Jy/beam
! Combined flux in latest and established models = 0.121336 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 165 components and 0.121336 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062294Jy  sigma=1.208238
! Fit after  self-cal, rms=0.062294Jy  sigma=1.208227
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.365 mas, bmaj=7.616 mas, bpa=-4.573 degrees
! Estimated noise=0.29167 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.365 x 7.616 at -4.573 degrees (North through East)
! Clean map  min=-0.0012398  max=0.092917 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.898 mas, bmaj=6.804 mas, bpa=-5.044 degrees
! Estimated noise=0.442192 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0726175 Jy
! Component: 100  -  total flux cleaned = 0.0937956 Jy
! Component: 150  -  total flux cleaned = 0.102843 Jy
! Component: 200  -  total flux cleaned = 0.107938 Jy
! Total flux subtracted in 200 components = 0.107938 Jy
! Clean residual min=-0.002463 max=0.002720 Jy/beam
! Clean residual mean=-0.000014 rms=0.000583 Jy/beam
! Combined flux in latest and established models = 0.107938 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 24 model components to the UV plane model.
! The established model now contains 24 components and 0.107938 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.365 mas, bmaj=7.616 mas, bpa=-4.573 degrees
! Estimated noise=0.29167 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00384769 Jy
! Component: 100  -  total flux cleaned = 0.00616748 Jy
! Component: 150  -  total flux cleaned = 0.00781902 Jy
! Component: 200  -  total flux cleaned = 0.00907239 Jy
! Total flux subtracted in 200 components = 0.00907239 Jy
! Clean residual min=-0.001490 max=0.001427 Jy/beam
! Clean residual mean=0.000004 rms=0.000358 Jy/beam
! Combined flux in latest and established models = 0.117011 Jy
! Adding 47 model components to the UV plane model.
! The established model now contains 64 components and 0.117011 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.605 mas, bmaj=11.28 mas, bpa=-3.551 degrees
! Estimated noise=0.370352 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0013655 Jy
! Component: 100  -  total flux cleaned = 0.00223421 Jy
! Component: 150  -  total flux cleaned = 0.0026036 Jy
! Component: 200  -  total flux cleaned = 0.00284317 Jy
! Total flux subtracted in 200 components = 0.00284317 Jy
! Clean residual min=-0.001295 max=0.001355 Jy/beam
! Clean residual mean=0.000012 rms=0.000390 Jy/beam
! Combined flux in latest and established models = 0.119854 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000203198 Jy
! Component: 100  -  total flux cleaned = 0.000393124 Jy
! Component: 150  -  total flux cleaned = 0.000556581 Jy
! Component: 200  -  total flux cleaned = 0.000653294 Jy
! Total flux subtracted in 200 components = 0.000653294 Jy
! Clean residual min=-0.001329 max=0.001320 Jy/beam
! Clean residual mean=0.000013 rms=0.000384 Jy/beam
! Combined flux in latest and established models = 0.120507 Jy
! Adding 61 model components to the UV plane model.
! The established model now contains 119 components and 0.120507 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.365 mas, bmaj=7.616 mas, bpa=-4.573 degrees
! Estimated noise=0.29167 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000107463 Jy
! Component: 100  -  total flux cleaned = 3.6727e-05 Jy
! Component: 150  -  total flux cleaned = 0.000128838 Jy
! Component: 200  -  total flux cleaned = 0.000179373 Jy
! Total flux subtracted in 200 components = 0.000179373 Jy
! Clean residual min=-0.001402 max=0.001428 Jy/beam
! Clean residual mean=0.000006 rms=0.000332 Jy/beam
! Combined flux in latest and established models = 0.120686 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 140 components and 0.120686 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062309Jy  sigma=1.208401
! Fit after  self-cal, rms=0.062307Jy  sigma=1.208319
wmodel J1929+0910_S_map.mod
! Writing 140 model components to file: J1929+0910_S_map.mod
wobs   J1929+0910_S_uvs.fits
! Writing UV FITS file: J1929+0910_S_uvs.fits
wwins  J1929+0910_S_map.win
! wwins: Wrote 3 windows to J1929+0910_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -1.55595e-06 Jy
! Component: 100  -  total flux cleaned = 4.53664e-05 Jy
! Component: 150  -  total flux cleaned = 6.77923e-05 Jy
! Component: 200  -  total flux cleaned = 0.000130685 Jy
! Component: 250  -  total flux cleaned = 0.00015122 Jy
! Component: 300  -  total flux cleaned = 0.000210583 Jy
! Component: 350  -  total flux cleaned = 0.000248975 Jy
! Component: 400  -  total flux cleaned = 0.000193062 Jy
! Component: 450  -  total flux cleaned = 0.000138567 Jy
! Component: 500  -  total flux cleaned = 0.000138391 Jy
! Component: 550  -  total flux cleaned = 0.000103185 Jy
! Component: 600  -  total flux cleaned = 0.000119979 Jy
! Component: 650  -  total flux cleaned = 3.51657e-05 Jy
! Component: 700  -  total flux cleaned = 6.87413e-05 Jy
! Component: 750  -  total flux cleaned = 3.59907e-05 Jy
! Component: 800  -  total flux cleaned = 6.80981e-05 Jy
! Component: 850  -  total flux cleaned = -1.12264e-05 Jy
! Component: 900  -  total flux cleaned = 2.03789e-05 Jy
! Component: 950  -  total flux cleaned = 5.39971e-06 Jy
! Component: 1000  -  total flux cleaned = -2.4661e-05 Jy
! Component: 1050  -  total flux cleaned = 5.77052e-06 Jy
! Component: 1100  -  total flux cleaned = 9.46322e-05 Jy
! Component: 1150  -  total flux cleaned = 7.98956e-05 Jy
! Component: 1200  -  total flux cleaned = 9.40777e-05 Jy
! Component: 1250  -  total flux cleaned = 8.00501e-05 Jy
! Component: 1300  -  total flux cleaned = 0.000150665 Jy
! Component: 1350  -  total flux cleaned = 0.000164614 Jy
! Component: 1400  -  total flux cleaned = 0.000233265 Jy
! Component: 1450  -  total flux cleaned = 0.000287484 Jy
! Component: 1500  -  total flux cleaned = 0.000314096 Jy
! Component: 1550  -  total flux cleaned = 0.000327471 Jy
! Component: 1600  -  total flux cleaned = 0.000366856 Jy
! Component: 1650  -  total flux cleaned = 0.000418864 Jy
! Component: 1700  -  total flux cleaned = 0.00045772 Jy
! Component: 1750  -  total flux cleaned = 0.000457983 Jy
! Component: 1800  -  total flux cleaned = 0.000546246 Jy
! Component: 1850  -  total flux cleaned = 0.000533668 Jy
! Component: 1900  -  total flux cleaned = 0.00060806 Jy
! Component: 1950  -  total flux cleaned = 0.000632805 Jy
! Component: 2000  -  total flux cleaned = 0.000681467 Jy
! Component: 2050  -  total flux cleaned = 0.000753834 Jy
! Component: 2100  -  total flux cleaned = 0.000813613 Jy
! Component: 2150  -  total flux cleaned = 0.000825318 Jy
! Component: 2200  -  total flux cleaned = 0.000860534 Jy
! Component: 2250  -  total flux cleaned = 0.000895623 Jy
! Component: 2300  -  total flux cleaned = 0.000930188 Jy
! Component: 2350  -  total flux cleaned = 0.000964365 Jy
! Component: 2400  -  total flux cleaned = 0.000987066 Jy
! Component: 2450  -  total flux cleaned = 0.00104333 Jy
! Component: 2500  -  total flux cleaned = 0.00100991 Jy
! Component: 2550  -  total flux cleaned = 0.00106535 Jy
! Component: 2600  -  total flux cleaned = 0.00107633 Jy
! Component: 2650  -  total flux cleaned = 0.00111986 Jy
! Component: 2700  -  total flux cleaned = 0.00113081 Jy
! Component: 2750  -  total flux cleaned = 0.00112004 Jy
! Component: 2800  -  total flux cleaned = 0.0012477 Jy
! Component: 2850  -  total flux cleaned = 0.00119478 Jy
! Component: 2900  -  total flux cleaned = 0.00125768 Jy
! Component: 2950  -  total flux cleaned = 0.00128888 Jy
! Component: 3000  -  total flux cleaned = 0.00135099 Jy
! Component: 3050  -  total flux cleaned = 0.00135102 Jy
! Component: 3100  -  total flux cleaned = 0.00138161 Jy
! Component: 3150  -  total flux cleaned = 0.00143219 Jy
! Component: 3200  -  total flux cleaned = 0.00143221 Jy
! Component: 3250  -  total flux cleaned = 0.00146218 Jy
! Component: 3300  -  total flux cleaned = 0.00153161 Jy
! Component: 3350  -  total flux cleaned = 0.00158081 Jy
! Component: 3400  -  total flux cleaned = 0.0016199 Jy
! Component: 3450  -  total flux cleaned = 0.00169761 Jy
! Component: 3500  -  total flux cleaned = 0.0017169 Jy
! Component: 3550  -  total flux cleaned = 0.00173604 Jy
! Component: 3600  -  total flux cleaned = 0.00178368 Jy
! Component: 3650  -  total flux cleaned = 0.00183099 Jy
! Component: 3700  -  total flux cleaned = 0.00186853 Jy
! Component: 3750  -  total flux cleaned = 0.00186858 Jy
! Component: 3800  -  total flux cleaned = 0.00193361 Jy
! Component: 3850  -  total flux cleaned = 0.00197062 Jy
! Component: 3900  -  total flux cleaned = 0.00198912 Jy
! Component: 3950  -  total flux cleaned = 0.00205294 Jy
! Component: 4000  -  total flux cleaned = 0.00207116 Jy
! Component: 4050  -  total flux cleaned = 0.00214321 Jy
! Total flux subtracted in 4096 components = 0.00217007 Jy
! Clean residual min=-0.000537 max=0.000510 Jy/beam
! Clean residual mean=0.000003 rms=0.000166 Jy/beam
! Combined flux in latest and established models = 0.122856 Jy
keep
! Adding 289 model components to the UV plane model.
! The established model now contains 429 components and 0.122856 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J1929+0910_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.365 x 7.616 at -4.573 degrees (North through East)
! Clean map  min=-0.0010849  max=0.092942 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J1929+0910_S_map.fits
wmodel /vlbi/uf001/uva//J1929+0910_S_map.mod
! Writing 429 model components to file: /vlbi/uf001/uva//J1929+0910_S_map.mod
wobs   /vlbi/uf001/uva//J1929+0910_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J1929+0910_S_uvs.fits
wwins  /vlbi/uf001/uva//J1929+0910_S_map.win
! wwins: Wrote 4 windows to /vlbi/uf001/uva//J1929+0910_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0929416 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000164112 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.529726 0.529726 1.05945 2.1189 4.23781 8.47561 16.9512 33.9024 67.8049
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0004 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.092 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  566.33 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J1929+0910_S_dfm.log closed on Mon Jan 14 05:06:04 2019