! Started logfile: /vlbi/uf001/uva//J1921+4333_S_dfm.log on Mon Jan 14 05:01:48 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J1921+4333_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J1921+4333_S_uva.fits
! AN table 1: 72 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.924383 visibilities/baseline/integration-bin.
! Found source: J1921+4333
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 8985 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1921+4333_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.038191Jy  sigma=22.849976
! Fit after  self-cal, rms=0.798591Jy  sigma=17.566320
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.156 mas, bmaj=4.909 mas, bpa=-10.33 degrees
! Estimated noise=0.55036 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.152663 Jy
! Component: 100  -  total flux cleaned = 0.217816 Jy
! Total flux subtracted in 100 components = 0.217816 Jy
! Clean residual min=-0.011921 max=0.036301 Jy/beam
! Clean residual mean=-0.000028 rms=0.003566 Jy/beam
! Combined flux in latest and established models = 0.217816 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.217816 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.088632Jy  sigma=1.863902
! Fit after  self-cal, rms=0.085230Jy  sigma=1.802489
! Inverting map 
! Added new window around map position (3, -1.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.040577 Jy
! Component: 100  -  total flux cleaned = 0.0604438 Jy
! Total flux subtracted in 100 components = 0.0604438 Jy
! Clean residual min=-0.005813 max=0.009074 Jy/beam
! Clean residual mean=-0.000016 rms=0.001474 Jy/beam
! Combined flux in latest and established models = 0.27826 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 17 components and 0.27826 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061389Jy  sigma=1.285575
! Fit after  self-cal, rms=0.060413Jy  sigma=1.266534
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0117101 Jy
! Component: 100  -  total flux cleaned = 0.017017 Jy
! Total flux subtracted in 100 components = 0.017017 Jy
! Clean residual min=-0.004528 max=0.005239 Jy/beam
! Clean residual mean=-0.000012 rms=0.001096 Jy/beam
! Combined flux in latest and established models = 0.295277 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 22 components and 0.295277 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057936Jy  sigma=1.215726
! Fit after  self-cal, rms=0.057797Jy  sigma=1.212939
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.823 mas, bmaj=5.547 mas, bpa=-9.336 degrees
! Estimated noise=0.34475 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00455416 Jy
! Component: 100  -  total flux cleaned = 0.00557061 Jy
! Component: 150  -  total flux cleaned = 0.00622701 Jy
! Component: 200  -  total flux cleaned = 0.00651625 Jy
! Total flux subtracted in 200 components = 0.00651625 Jy
! Clean residual min=-0.003911 max=0.003822 Jy/beam
! Clean residual mean=-0.000022 rms=0.000831 Jy/beam
! Combined flux in latest and established models = 0.301793 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 32 components and 0.301793 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057353Jy  sigma=1.204124
! Fit after  self-cal, rms=0.057310Jy  sigma=1.203303
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.823 x 5.547 at -9.336 degrees (North through East)
! Clean map  min=-0.0035539  max=0.1916 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     HN        0.95     KP        1.01     
!   LA        0.96     MK        0.94     NL        1.04     OV        0.98     
!   PT        0.96     SC        0.98     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.00     HN        1.00     KP        1.01     
!   LA        0.95     MK        0.95     NL        1.03     OV        1.05     
!   PT        0.99     SC        1.05     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.99     HN        1.02     KP        1.01     
!   LA        0.95     MK        0.97     NL        1.03     OV        1.00     
!   PT        0.98     SC        0.99     
! 
! 
! Fit before self-cal, rms=0.057310Jy  sigma=1.203303
! Fit after  self-cal, rms=0.056048Jy  sigma=1.185186
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.789 mas, bmaj=5.553 mas, bpa=-9.981 degrees
! Estimated noise=0.343344 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000911318 Jy
! Component: 100  -  total flux cleaned = -0.00130348 Jy
! Component: 150  -  total flux cleaned = -0.00136862 Jy
! Component: 200  -  total flux cleaned = -0.00136829 Jy
! Total flux subtracted in 200 components = -0.00136829 Jy
! Clean residual min=-0.003091 max=0.002986 Jy/beam
! Clean residual mean=-0.000004 rms=0.000644 Jy/beam
! Combined flux in latest and established models = 0.300425 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 37 components and 0.300425 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.055837Jy  sigma=1.180625
! Fit after  self-cal, rms=0.055802Jy  sigma=1.180077
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.055802Jy  sigma=1.180077
! Fit after  self-cal, rms=0.053893Jy  sigma=1.157535
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.734 mas, bmaj=5.55 mas, bpa=-8.643 degrees
! Estimated noise=0.339196 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.06214e-05 Jy
! Component: 100  -  total flux cleaned = -0.000228902 Jy
! Component: 150  -  total flux cleaned = -0.000342894 Jy
! Component: 200  -  total flux cleaned = -0.000408672 Jy
! Total flux subtracted in 200 components = -0.000408672 Jy
! Clean residual min=-0.002512 max=0.002069 Jy/beam
! Clean residual mean=-0.000001 rms=0.000464 Jy/beam
! Combined flux in latest and established models = 0.300016 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 45 components and 0.300016 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.053813Jy  sigma=1.155708
! Fit after  self-cal, rms=0.053785Jy  sigma=1.155214
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.46109e-05 Jy
! Component: 100  -  total flux cleaned = -4.0224e-06 Jy
! Component: 150  -  total flux cleaned = -5.78541e-05 Jy
! Component: 200  -  total flux cleaned = -0.000108072 Jy
! Total flux subtracted in 200 components = -0.000108072 Jy
! Clean residual min=-0.002348 max=0.002002 Jy/beam
! Clean residual mean=-0.000001 rms=0.000447 Jy/beam
! Combined flux in latest and established models = 0.299908 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 54 components and 0.299908 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.053742Jy  sigma=1.154173
! Fit after  self-cal, rms=0.053724Jy  sigma=1.153866
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.053724Jy  sigma=1.153866
! Fit after  self-cal, rms=0.053616Jy  sigma=1.153763
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.727 mas, bmaj=5.547 mas, bpa=-8.695 degrees
! Estimated noise=0.338558 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000117615 Jy
! Component: 100  -  total flux cleaned = -0.000115491 Jy
! Component: 150  -  total flux cleaned = -0.000216162 Jy
! Component: 200  -  total flux cleaned = -0.000261839 Jy
! Total flux subtracted in 200 components = -0.000261839 Jy
! Clean residual min=-0.002186 max=0.001876 Jy/beam
! Clean residual mean=-0.000001 rms=0.000432 Jy/beam
! Combined flux in latest and established models = 0.299646 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 59 components and 0.299646 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.053581Jy  sigma=1.152904
! Fit after  self-cal, rms=0.053568Jy  sigma=1.152659
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.63279e-05 Jy
! Component: 100  -  total flux cleaned = -2.66498e-05 Jy
! Component: 150  -  total flux cleaned = -2.58352e-05 Jy
! Component: 200  -  total flux cleaned = -4.50535e-05 Jy
! Total flux subtracted in 200 components = -4.50535e-05 Jy
! Clean residual min=-0.002083 max=0.001830 Jy/beam
! Clean residual mean=-0.000001 rms=0.000422 Jy/beam
! Combined flux in latest and established models = 0.299601 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 66 components and 0.299601 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.053544Jy  sigma=1.152042
! Fit after  self-cal, rms=0.053533Jy  sigma=1.151848
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.053533Jy  sigma=1.151848
! Fit after  self-cal, rms=0.053489Jy  sigma=1.151806
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.889 mas, bmaj=9.137 mas, bpa=-6.609 degrees
! Estimated noise=0.429452 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.97747e-05 Jy
! Component: 100  -  total flux cleaned = 4.44694e-05 Jy
! Component: 150  -  total flux cleaned = 5.37978e-05 Jy
! Component: 200  -  total flux cleaned = 6.2702e-05 Jy
! Total flux subtracted in 200 components = 6.2702e-05 Jy
! Clean residual min=-0.001727 max=0.001760 Jy/beam
! Clean residual mean=-0.000003 rms=0.000457 Jy/beam
! Combined flux in latest and established models = 0.299664 Jy
selfcal
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 70 components and 0.299664 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.053488Jy  sigma=1.151788
! Fit after  self-cal, rms=0.053488Jy  sigma=1.151769
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.28588e-06 Jy
! Component: 100  -  total flux cleaned = -2.49734e-05 Jy
! Component: 150  -  total flux cleaned = -2.53016e-05 Jy
! Component: 200  -  total flux cleaned = -1.06621e-05 Jy
! Total flux subtracted in 200 components = -1.06621e-05 Jy
! Clean residual min=-0.001726 max=0.001758 Jy/beam
! Clean residual mean=-0.000003 rms=0.000456 Jy/beam
! Combined flux in latest and established models = 0.299653 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 74 components and 0.299653 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.053487Jy  sigma=1.151754
! Fit after  self-cal, rms=0.053486Jy  sigma=1.151734
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.722 mas, bmaj=5.551 mas, bpa=-8.767 degrees
! Estimated noise=0.338256 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.722 x 5.551 at -8.767 degrees (North through East)
! Clean map  min=-0.0018506  max=0.18707 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.069 mas, bmaj=4.911 mas, bpa=-9.56 degrees
! Estimated noise=0.535621 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.154376 Jy
! Component: 100  -  total flux cleaned = 0.223367 Jy
! Component: 150  -  total flux cleaned = 0.257674 Jy
! Component: 200  -  total flux cleaned = 0.275702 Jy
! Total flux subtracted in 200 components = 0.275702 Jy
! Clean residual min=-0.003662 max=0.008657 Jy/beam
! Clean residual mean=-0.000005 rms=0.000956 Jy/beam
! Combined flux in latest and established models = 0.275702 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.275702 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.722 mas, bmaj=5.551 mas, bpa=-8.767 degrees
! Estimated noise=0.338256 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0119765 Jy
! Component: 100  -  total flux cleaned = 0.0176838 Jy
! Component: 150  -  total flux cleaned = 0.0206213 Jy
! Component: 200  -  total flux cleaned = 0.022226 Jy
! Total flux subtracted in 200 components = 0.022226 Jy
! Clean residual min=-0.001592 max=0.001759 Jy/beam
! Clean residual mean=-0.000002 rms=0.000405 Jy/beam
! Combined flux in latest and established models = 0.297928 Jy
! Adding 24 model components to the UV plane model.
! The established model now contains 35 components and 0.297928 Jy
! Inverting map 
! Added new window around map position (42, -74.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00127795 Jy
! Component: 100  -  total flux cleaned = 0.00166218 Jy
! Component: 150  -  total flux cleaned = 0.00185985 Jy
! Component: 200  -  total flux cleaned = 0.00194621 Jy
! Total flux subtracted in 200 components = 0.00194621 Jy
! Clean residual min=-0.001549 max=0.001622 Jy/beam
! Clean residual mean=-0.000000 rms=0.000386 Jy/beam
! Combined flux in latest and established models = 0.299875 Jy
! Adding 18 model components to the UV plane model.
! The established model now contains 48 components and 0.299874 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.889 mas, bmaj=9.137 mas, bpa=-6.609 degrees
! Estimated noise=0.429452 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000612131 Jy
! Component: 100  -  total flux cleaned = 0.000850457 Jy
! Component: 150  -  total flux cleaned = 0.000960921 Jy
! Component: 200  -  total flux cleaned = 0.00101363 Jy
! Total flux subtracted in 200 components = 0.00101363 Jy
! Clean residual min=-0.001660 max=0.001696 Jy/beam
! Clean residual mean=-0.000001 rms=0.000444 Jy/beam
! Combined flux in latest and established models = 0.300888 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.49524e-05 Jy
! Component: 100  -  total flux cleaned = 7.65611e-05 Jy
! Component: 150  -  total flux cleaned = 0.00012255 Jy
! Component: 200  -  total flux cleaned = 0.000163852 Jy
! Total flux subtracted in 200 components = 0.000163852 Jy
! Clean residual min=-0.001660 max=0.001671 Jy/beam
! Clean residual mean=-0.000000 rms=0.000442 Jy/beam
! Combined flux in latest and established models = 0.301052 Jy
! Adding 24 model components to the UV plane model.
! The established model now contains 69 components and 0.301052 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.722 mas, bmaj=5.551 mas, bpa=-8.767 degrees
! Estimated noise=0.338256 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.80051e-05 Jy
! Component: 100  -  total flux cleaned = -0.000126883 Jy
! Component: 150  -  total flux cleaned = -0.000167302 Jy
! Component: 200  -  total flux cleaned = -0.000184878 Jy
! Total flux subtracted in 200 components = -0.000184878 Jy
! Clean residual min=-0.001490 max=0.001615 Jy/beam
! Clean residual mean=-0.000000 rms=0.000379 Jy/beam
! Combined flux in latest and established models = 0.300867 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 80 components and 0.300867 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.053340Jy  sigma=1.148125
! Fit after  self-cal, rms=0.053317Jy  sigma=1.147593
wmodel J1921+4333_S_map.mod
! Writing 80 model components to file: J1921+4333_S_map.mod
wobs   J1921+4333_S_uvs.fits
! Writing UV FITS file: J1921+4333_S_uvs.fits
wwins  J1921+4333_S_map.win
! wwins: Wrote 3 windows to J1921+4333_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 6.25704e-05 Jy
! Component: 100  -  total flux cleaned = -0.000200171 Jy
! Component: 150  -  total flux cleaned = -0.000325183 Jy
! Component: 200  -  total flux cleaned = -0.000494246 Jy
! Component: 250  -  total flux cleaned = -0.000727732 Jy
! Component: 300  -  total flux cleaned = -0.000931856 Jy
! Component: 350  -  total flux cleaned = -0.00113111 Jy
! Component: 400  -  total flux cleaned = -0.00126061 Jy
! Component: 450  -  total flux cleaned = -0.001512 Jy
! Component: 500  -  total flux cleaned = -0.00161398 Jy
! Component: 550  -  total flux cleaned = -0.00177433 Jy
! Component: 600  -  total flux cleaned = -0.00195092 Jy
! Component: 650  -  total flux cleaned = -0.00204774 Jy
! Component: 700  -  total flux cleaned = -0.00216195 Jy
! Component: 750  -  total flux cleaned = -0.00232952 Jy
! Component: 800  -  total flux cleaned = -0.0024023 Jy
! Component: 850  -  total flux cleaned = -0.00251007 Jy
! Component: 900  -  total flux cleaned = -0.00261624 Jy
! Component: 950  -  total flux cleaned = -0.00270341 Jy
! Component: 1000  -  total flux cleaned = -0.00278967 Jy
! Component: 1050  -  total flux cleaned = -0.00292496 Jy
! Component: 1100  -  total flux cleaned = -0.00300829 Jy
! Component: 1150  -  total flux cleaned = -0.0030908 Jy
! Component: 1200  -  total flux cleaned = -0.0032207 Jy
! Component: 1250  -  total flux cleaned = -0.00330057 Jy
! Component: 1300  -  total flux cleaned = -0.00339531 Jy
! Component: 1350  -  total flux cleaned = -0.00347316 Jy
! Component: 1400  -  total flux cleaned = -0.00353496 Jy
! Component: 1450  -  total flux cleaned = -0.00361081 Jy
! Component: 1500  -  total flux cleaned = -0.00368596 Jy
! Component: 1550  -  total flux cleaned = -0.00380458 Jy
! Component: 1600  -  total flux cleaned = -0.00392178 Jy
! Component: 1650  -  total flux cleaned = -0.00405196 Jy
! Component: 1700  -  total flux cleaned = -0.00406604 Jy
! Component: 1750  -  total flux cleaned = -0.00415106 Jy
! Component: 1800  -  total flux cleaned = -0.00426287 Jy
! Component: 1850  -  total flux cleaned = -0.00429067 Jy
! Component: 1900  -  total flux cleaned = -0.004332 Jy
! Component: 1950  -  total flux cleaned = -0.00444093 Jy
! Component: 2000  -  total flux cleaned = -0.00448133 Jy
! Component: 2050  -  total flux cleaned = -0.00452117 Jy
! Component: 2100  -  total flux cleaned = -0.00458711 Jy
! Component: 2150  -  total flux cleaned = -0.00461338 Jy
! Component: 2200  -  total flux cleaned = -0.00465227 Jy
! Component: 2250  -  total flux cleaned = -0.00466517 Jy
! Component: 2300  -  total flux cleaned = -0.00472885 Jy
! Component: 2350  -  total flux cleaned = -0.00475401 Jy
! Component: 2400  -  total flux cleaned = -0.00479146 Jy
! Component: 2450  -  total flux cleaned = -0.0048038 Jy
! Component: 2500  -  total flux cleaned = -0.00485274 Jy
! Component: 2550  -  total flux cleaned = -0.00484059 Jy
! Component: 2600  -  total flux cleaned = -0.00487673 Jy
! Component: 2650  -  total flux cleaned = -0.0049005 Jy
! Component: 2700  -  total flux cleaned = -0.00491235 Jy
! Component: 2750  -  total flux cleaned = -0.00488894 Jy
! Component: 2800  -  total flux cleaned = -0.00488872 Jy
! Component: 2850  -  total flux cleaned = -0.0049003 Jy
! Component: 2900  -  total flux cleaned = -0.00487744 Jy
! Component: 2950  -  total flux cleaned = -0.0048889 Jy
! Component: 3000  -  total flux cleaned = -0.00487761 Jy
! Component: 3050  -  total flux cleaned = -0.00487765 Jy
! Component: 3100  -  total flux cleaned = -0.0048999 Jy
! Component: 3150  -  total flux cleaned = -0.00484487 Jy
! Component: 3200  -  total flux cleaned = -0.00484478 Jy
! Component: 3250  -  total flux cleaned = -0.00483399 Jy
! Component: 3300  -  total flux cleaned = -0.00480161 Jy
! Component: 3350  -  total flux cleaned = -0.00479088 Jy
! Component: 3400  -  total flux cleaned = -0.00478026 Jy
! Component: 3450  -  total flux cleaned = -0.00478015 Jy
! Component: 3500  -  total flux cleaned = -0.00474875 Jy
! Component: 3550  -  total flux cleaned = -0.00474875 Jy
! Component: 3600  -  total flux cleaned = -0.00468677 Jy
! Component: 3650  -  total flux cleaned = -0.00471759 Jy
! Component: 3700  -  total flux cleaned = -0.00465641 Jy
! Component: 3750  -  total flux cleaned = -0.0046868 Jy
! Component: 3800  -  total flux cleaned = -0.00465654 Jy
! Component: 3850  -  total flux cleaned = -0.00463663 Jy
! Component: 3900  -  total flux cleaned = -0.00462672 Jy
! Component: 3950  -  total flux cleaned = -0.00461698 Jy
! Component: 4000  -  total flux cleaned = -0.00460714 Jy
! Component: 4050  -  total flux cleaned = -0.00461688 Jy
! Total flux subtracted in 4096 components = -0.00460717 Jy
! Clean residual min=-0.000580 max=0.000640 Jy/beam
! Clean residual mean=0.000001 rms=0.000172 Jy/beam
! Combined flux in latest and established models = 0.29626 Jy
keep
! Adding 292 model components to the UV plane model.
! The established model now contains 372 components and 0.29626 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J1921+4333_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.722 x 5.551 at -8.767 degrees (North through East)
! Clean map  min=-0.001121  max=0.1877 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J1921+4333_S_map.fits
wmodel /vlbi/uf001/uva//J1921+4333_S_map.mod
! Writing 372 model components to file: /vlbi/uf001/uva//J1921+4333_S_map.mod
wobs   /vlbi/uf001/uva//J1921+4333_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J1921+4333_S_uvs.fits
wwins  /vlbi/uf001/uva//J1921+4333_S_map.win
! wwins: Wrote 4 windows to /vlbi/uf001/uva//J1921+4333_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.187696 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000171761 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.274531 0.274531 0.549063 1.09813 2.19625 4.3925 8.785 17.57 35.14 70.28
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0005 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.187 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1092.77 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J1921+4333_S_dfm.log closed on Mon Jan 14 05:01:52 2019