! Started logfile: /vlbi/uf001/uva//J1913-3630_S_dfm.log on Mon Jan 14 04:58:42 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J1913-3630_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J1913-3630_S_uva.fits
! AN table 1: 38 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.987719 visibilities/baseline/integration-bin.
! Found source: J1913-3630
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 1689 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1913-3630_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=1.001719Jy  sigma=15.870812
! Fit after  self-cal, rms=0.893660Jy  sigma=14.093285
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.777 mas, bmaj=50.66 mas, bpa=-3.336 degrees
! Estimated noise=1.45169 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0863986 Jy
! Component: 100  -  total flux cleaned = 0.106987 Jy
! Total flux subtracted in 100 components = 0.106987 Jy
! Clean residual min=-0.007597 max=0.007963 Jy/beam
! Clean residual mean=0.000065 rms=0.002455 Jy/beam
! Combined flux in latest and established models = 0.106987 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.106987 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.083817Jy  sigma=1.250694
! Fit after  self-cal, rms=0.083807Jy  sigma=1.250092
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=9.43 mas, bmaj=53.94 mas, bpa=-2.268 degrees
! Estimated noise=1.11529 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00907126 Jy
! Component: 100  -  total flux cleaned = 0.0123815 Jy
! Component: 150  -  total flux cleaned = 0.0126443 Jy
! Component: 200  -  total flux cleaned = 0.0125605 Jy
! Total flux subtracted in 200 components = 0.0125605 Jy
! Clean residual min=-0.006886 max=0.005227 Jy/beam
! Clean residual mean=0.000116 rms=0.001552 Jy/beam
! Combined flux in latest and established models = 0.119548 Jy
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 54 components and 0.119548 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.082919Jy  sigma=1.233149
! Fit after  self-cal, rms=0.082969Jy  sigma=1.232813
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 9.43 x 53.94 at -2.268 degrees (North through East)
! Clean map  min=-0.0068026  max=0.10985 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.91     KP        1.00     LA        1.03     NL        1.14     
!   OV        0.95     PT        1.03     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.99     KP        1.07     LA        0.94     NL        1.19     
!   OV        0.88     PT        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.96     KP        1.01     LA        0.97     NL        1.03     
!   OV        0.95     PT        1.07     
! 
! 
! Fit before self-cal, rms=0.082969Jy  sigma=1.232813
! Fit after  self-cal, rms=0.085256Jy  sigma=1.223351
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=9.551 mas, bmaj=53.79 mas, bpa=-1.75 degrees
! Estimated noise=1.11355 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.30937e-05 Jy
! Component: 100  -  total flux cleaned = 0.000118193 Jy
! Component: 150  -  total flux cleaned = 0.00012022 Jy
! Component: 200  -  total flux cleaned = 0.00019199 Jy
! Total flux subtracted in 200 components = 0.00019199 Jy
! Clean residual min=-0.004700 max=0.004263 Jy/beam
! Clean residual mean=0.000088 rms=0.001191 Jy/beam
! Combined flux in latest and established models = 0.11974 Jy
! Performing phase self-cal
! Adding 41 model components to the UV plane model.
! The established model now contains 95 components and 0.11974 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.085160Jy  sigma=1.222221
! Fit after  self-cal, rms=0.085295Jy  sigma=1.221787
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.085295Jy  sigma=1.221787
! Fit after  self-cal, rms=0.087056Jy  sigma=1.218215
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.581 mas, bmaj=53.64 mas, bpa=-1.736 degrees
! Estimated noise=1.11879 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000158262 Jy
! Component: 100  -  total flux cleaned = -0.000224936 Jy
! Component: 150  -  total flux cleaned = -0.000198804 Jy
! Component: 200  -  total flux cleaned = -0.000197128 Jy
! Total flux subtracted in 200 components = -0.000197128 Jy
! Clean residual min=-0.003509 max=0.004125 Jy/beam
! Clean residual mean=0.000070 rms=0.001078 Jy/beam
! Combined flux in latest and established models = 0.119543 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 119 components and 0.119543 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.087032Jy  sigma=1.217905
! Fit after  self-cal, rms=0.087083Jy  sigma=1.217848
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.94416e-05 Jy
! Component: 100  -  total flux cleaned = -0.00010532 Jy
! Component: 150  -  total flux cleaned = -8.88861e-05 Jy
! Component: 200  -  total flux cleaned = -0.00010541 Jy
! Total flux subtracted in 200 components = -0.00010541 Jy
! Clean residual min=-0.003435 max=0.004168 Jy/beam
! Clean residual mean=0.000070 rms=0.001072 Jy/beam
! Combined flux in latest and established models = 0.119437 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 149 components and 0.119437 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.087075Jy  sigma=1.217740
! Fit after  self-cal, rms=0.087072Jy  sigma=1.217730
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.087072Jy  sigma=1.217730
! Fit after  self-cal, rms=0.088697Jy  sigma=1.216142
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.595 mas, bmaj=53.45 mas, bpa=-1.821 degrees
! Estimated noise=1.12063 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000359684 Jy
! Component: 100  -  total flux cleaned = -0.000570667 Jy
! Component: 150  -  total flux cleaned = -0.000704128 Jy
! Component: 200  -  total flux cleaned = -0.000763952 Jy
! Total flux subtracted in 200 components = -0.000763952 Jy
! Clean residual min=-0.003176 max=0.003947 Jy/beam
! Clean residual mean=0.000048 rms=0.001006 Jy/beam
! Combined flux in latest and established models = 0.118673 Jy
selfcal
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 188 components and 0.118673 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.088679Jy  sigma=1.215967
! Fit after  self-cal, rms=0.088719Jy  sigma=1.215905
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000111386 Jy
! Component: 100  -  total flux cleaned = -0.000111069 Jy
! Component: 150  -  total flux cleaned = -0.000140459 Jy
! Component: 200  -  total flux cleaned = -0.000126892 Jy
! Total flux subtracted in 200 components = -0.000126892 Jy
! Clean residual min=-0.003150 max=0.003949 Jy/beam
! Clean residual mean=0.000049 rms=0.001004 Jy/beam
! Combined flux in latest and established models = 0.118546 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 202 components and 0.118546 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.088711Jy  sigma=1.215862
! Fit after  self-cal, rms=0.088707Jy  sigma=1.215854
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.088707Jy  sigma=1.215854
! Fit after  self-cal, rms=0.089150Jy  sigma=1.215775
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=10.79 mas, bmaj=56.04 mas, bpa=-1.208 degrees
! Estimated noise=1.12101 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.73157e-05 Jy
! Component: 100  -  total flux cleaned = -0.000145265 Jy
! Component: 150  -  total flux cleaned = -0.000194962 Jy
! Component: 200  -  total flux cleaned = -0.0002867 Jy
! Total flux subtracted in 200 components = -0.0002867 Jy
! Clean residual min=-0.002732 max=0.003722 Jy/beam
! Clean residual mean=0.000054 rms=0.000988 Jy/beam
! Combined flux in latest and established models = 0.11826 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 220 components and 0.11826 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.089140Jy  sigma=1.215689
! Fit after  self-cal, rms=0.089140Jy  sigma=1.215678
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.03289e-05 Jy
! Component: 100  -  total flux cleaned = -7.02335e-05 Jy
! Component: 150  -  total flux cleaned = -6.97332e-05 Jy
! Component: 200  -  total flux cleaned = -5.7894e-05 Jy
! Total flux subtracted in 200 components = -5.7894e-05 Jy
! Clean residual min=-0.002707 max=0.003703 Jy/beam
! Clean residual mean=0.000054 rms=0.000986 Jy/beam
! Combined flux in latest and established models = 0.118202 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 227 components and 0.118202 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.089136Jy  sigma=1.215646
! Fit after  self-cal, rms=0.089134Jy  sigma=1.215641
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=9.604 mas, bmaj=53.36 mas, bpa=-1.854 degrees
! Estimated noise=1.1228 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 9.604 x 53.36 at -1.854 degrees (North through East)
! Clean map  min=-0.00303  max=0.11088 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.916 mas, bmaj=49.62 mas, bpa=-2.958 degrees
! Estimated noise=1.46142 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0868156 Jy
! Component: 100  -  total flux cleaned = 0.106651 Jy
! Component: 150  -  total flux cleaned = 0.11369 Jy
! Component: 200  -  total flux cleaned = 0.116966 Jy
! Total flux subtracted in 200 components = 0.116966 Jy
! Clean residual min=-0.003292 max=0.003387 Jy/beam
! Clean residual mean=0.000031 rms=0.000988 Jy/beam
! Combined flux in latest and established models = 0.116966 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 32 model components to the UV plane model.
! The established model now contains 32 components and 0.116966 Jy
! Inverting map and beam 
! Estimated beam: bmin=9.604 mas, bmaj=53.36 mas, bpa=-1.854 degrees
! Estimated noise=1.1228 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00134124 Jy
! Component: 100  -  total flux cleaned = 0.00172258 Jy
! Component: 150  -  total flux cleaned = 0.00204038 Jy
! Component: 200  -  total flux cleaned = 0.00212992 Jy
! Total flux subtracted in 200 components = 0.00212992 Jy
! Clean residual min=-0.003176 max=0.003597 Jy/beam
! Clean residual mean=0.000054 rms=0.001026 Jy/beam
! Combined flux in latest and established models = 0.119096 Jy
! Adding 51 model components to the UV plane model.
! The established model now contains 83 components and 0.119096 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=10.79 mas, bmaj=56.04 mas, bpa=-1.208 degrees
! Estimated noise=1.12101 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000202784 Jy
! Component: 100  -  total flux cleaned = -0.000165045 Jy
! Component: 150  -  total flux cleaned = -0.000148107 Jy
! Component: 200  -  total flux cleaned = -0.000163579 Jy
! Total flux subtracted in 200 components = -0.000163579 Jy
! Clean residual min=-0.002806 max=0.003654 Jy/beam
! Clean residual mean=0.000060 rms=0.001020 Jy/beam
! Combined flux in latest and established models = 0.118932 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.2183e-07 Jy
! Component: 100  -  total flux cleaned = -1.51425e-05 Jy
! Component: 150  -  total flux cleaned = -2.9115e-05 Jy
! Component: 200  -  total flux cleaned = -4.26465e-05 Jy
! Total flux subtracted in 200 components = -4.26465e-05 Jy
! Clean residual min=-0.002759 max=0.003673 Jy/beam
! Clean residual mean=0.000059 rms=0.001016 Jy/beam
! Combined flux in latest and established models = 0.118889 Jy
! Adding 31 model components to the UV plane model.
! The established model now contains 111 components and 0.118889 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=9.604 mas, bmaj=53.36 mas, bpa=-1.854 degrees
! Estimated noise=1.1228 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.16352e-05 Jy
! Component: 100  -  total flux cleaned = 2.95893e-05 Jy
! Component: 150  -  total flux cleaned = 6.12245e-05 Jy
! Component: 200  -  total flux cleaned = 9.23245e-05 Jy
! Total flux subtracted in 200 components = 9.23245e-05 Jy
! Clean residual min=-0.003014 max=0.003722 Jy/beam
! Clean residual mean=0.000051 rms=0.001009 Jy/beam
! Combined flux in latest and established models = 0.118982 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 137 components and 0.118982 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.089141Jy  sigma=1.215841
! Fit after  self-cal, rms=0.089134Jy  sigma=1.215818
wmodel J1913-3630_S_map.mod
! Writing 137 model components to file: J1913-3630_S_map.mod
wobs   J1913-3630_S_uvs.fits
! Writing UV FITS file: J1913-3630_S_uvs.fits
wwins  J1913-3630_S_map.win
! wwins: Wrote 1 windows to J1913-3630_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.00129665 Jy
! Component: 100  -  total flux cleaned = 0.00129808 Jy
! Component: 150  -  total flux cleaned = 0.00134336 Jy
! Component: 200  -  total flux cleaned = 0.00105558 Jy
! Component: 250  -  total flux cleaned = 0.000753124 Jy
! Component: 300  -  total flux cleaned = 0.000683698 Jy
! Component: 350  -  total flux cleaned = 0.000617772 Jy
! Component: 400  -  total flux cleaned = 0.000495618 Jy
! Component: 450  -  total flux cleaned = 0.000467477 Jy
! Component: 500  -  total flux cleaned = 0.000413571 Jy
! Component: 550  -  total flux cleaned = 0.000488444 Jy
! Component: 600  -  total flux cleaned = 0.000560985 Jy
! Component: 650  -  total flux cleaned = 0.000653871 Jy
! Component: 700  -  total flux cleaned = 0.000763869 Jy
! Component: 750  -  total flux cleaned = 0.000826379 Jy
! Component: 800  -  total flux cleaned = 0.000949248 Jy
! Component: 850  -  total flux cleaned = 0.00102929 Jy
! Component: 900  -  total flux cleaned = 0.00104867 Jy
! Component: 950  -  total flux cleaned = 0.00106728 Jy
! Component: 1000  -  total flux cleaned = 0.00104855 Jy
! Component: 1050  -  total flux cleaned = 0.00104889 Jy
! Component: 1100  -  total flux cleaned = 0.00108496 Jy
! Component: 1150  -  total flux cleaned = 0.00112024 Jy
! Component: 1200  -  total flux cleaned = 0.00115482 Jy
! Component: 1250  -  total flux cleaned = 0.00122244 Jy
! Component: 1300  -  total flux cleaned = 0.00125558 Jy
! Component: 1350  -  total flux cleaned = 0.00133753 Jy
! Component: 1400  -  total flux cleaned = 0.00141822 Jy
! Component: 1450  -  total flux cleaned = 0.00149794 Jy
! Component: 1500  -  total flux cleaned = 0.00159269 Jy
! Component: 1550  -  total flux cleaned = 0.00167088 Jy
! Component: 1600  -  total flux cleaned = 0.00174836 Jy
! Component: 1650  -  total flux cleaned = 0.00179442 Jy
! Component: 1700  -  total flux cleaned = 0.00185511 Jy
! Component: 1750  -  total flux cleaned = 0.0019003 Jy
! Component: 1800  -  total flux cleaned = 0.00196 Jy
! Component: 1850  -  total flux cleaned = 0.00203381 Jy
! Component: 1900  -  total flux cleaned = 0.00206323 Jy
! Component: 1950  -  total flux cleaned = 0.00209241 Jy
! Component: 2000  -  total flux cleaned = 0.00212149 Jy
! Component: 2050  -  total flux cleaned = 0.00215021 Jy
! Component: 2100  -  total flux cleaned = 0.00219321 Jy
! Component: 2150  -  total flux cleaned = 0.00222188 Jy
! Component: 2200  -  total flux cleaned = 0.00229341 Jy
! Component: 2250  -  total flux cleaned = 0.00233624 Jy
! Component: 2300  -  total flux cleaned = 0.00239331 Jy
! Component: 2350  -  total flux cleaned = 0.00242187 Jy
! Component: 2400  -  total flux cleaned = 0.00249319 Jy
! Component: 2450  -  total flux cleaned = 0.00257885 Jy
! Component: 2500  -  total flux cleaned = 0.00265031 Jy
! Component: 2550  -  total flux cleaned = 0.00270763 Jy
! Component: 2600  -  total flux cleaned = 0.0027938 Jy
! Component: 2650  -  total flux cleaned = 0.00285152 Jy
! Component: 2700  -  total flux cleaned = 0.00290945 Jy
! Component: 2750  -  total flux cleaned = 0.00296753 Jy
! Component: 2800  -  total flux cleaned = 0.00302564 Jy
! Component: 2850  -  total flux cleaned = 0.00306937 Jy
! Component: 2900  -  total flux cleaned = 0.0031721 Jy
! Component: 2950  -  total flux cleaned = 0.00320165 Jy
! Component: 3000  -  total flux cleaned = 0.00324601 Jy
! Component: 3050  -  total flux cleaned = 0.00330566 Jy
! Component: 3100  -  total flux cleaned = 0.00332069 Jy
! Component: 3150  -  total flux cleaned = 0.00333568 Jy
! Component: 3200  -  total flux cleaned = 0.00338116 Jy
! Component: 3250  -  total flux cleaned = 0.00339652 Jy
! Component: 3300  -  total flux cleaned = 0.00341192 Jy
! Component: 3350  -  total flux cleaned = 0.0034429 Jy
! Component: 3400  -  total flux cleaned = 0.00347407 Jy
! Component: 3450  -  total flux cleaned = 0.00348973 Jy
! Component: 3500  -  total flux cleaned = 0.00350527 Jy
! Component: 3550  -  total flux cleaned = 0.00356914 Jy
! Component: 3600  -  total flux cleaned = 0.00356917 Jy
! Component: 3650  -  total flux cleaned = 0.00355274 Jy
! Component: 3700  -  total flux cleaned = 0.0035854 Jy
! Component: 3750  -  total flux cleaned = 0.00361841 Jy
! Component: 3800  -  total flux cleaned = 0.00365168 Jy
! Component: 3850  -  total flux cleaned = 0.00366849 Jy
! Component: 3900  -  total flux cleaned = 0.00370258 Jy
! Component: 3950  -  total flux cleaned = 0.00377172 Jy
! Component: 4000  -  total flux cleaned = 0.00373673 Jy
! Component: 4050  -  total flux cleaned = 0.00380722 Jy
! Total flux subtracted in 4096 components = 0.00380732 Jy
! Clean residual min=-0.000951 max=0.000989 Jy/beam
! Clean residual mean=0.000010 rms=0.000391 Jy/beam
! Combined flux in latest and established models = 0.122789 Jy
keep
! Adding 462 model components to the UV plane model.
! The established model now contains 599 components and 0.122789 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J1913-3630_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 9.604 x 53.36 at -1.854 degrees (North through East)
! Clean map  min=-0.0026384  max=0.11117 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J1913-3630_S_map.fits
wmodel /vlbi/uf001/uva//J1913-3630_S_map.mod
! Writing 599 model components to file: /vlbi/uf001/uva//J1913-3630_S_map.mod
wobs   /vlbi/uf001/uva//J1913-3630_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J1913-3630_S_uvs.fits
wwins  /vlbi/uf001/uva//J1913-3630_S_map.win
! wwins: Wrote 2 windows to /vlbi/uf001/uva//J1913-3630_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.111169 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00040102 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.08219 1.08219 2.16438 4.32875 8.6575 17.315 34.63 69.26
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0012 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.111 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  277.216 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J1913-3630_S_dfm.log closed on Mon Jan 14 04:58:47 2019