! Started logfile: /vlbi/uf001/uva//J1912+3740_X_dfm.log on Mon Jan 14 04:58:03 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uva//J1912+3740_X_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J1912+3740_X_uva.fits ! AN table 1: 19 integrations on 36 of 36 possible baselines. ! AN table 2: 19 integrations on 36 of 36 possible baselines. ! AN table 3: 19 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.967836 visibilities/baseline/integration-bin. ! Found source: J1912+3740 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 23832 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1912+3740_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 29 telescope corrections were flagged in sub-array 2. ! A total of 3 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 29 telescope corrections were flagged in sub-array 2. ! A total of 3 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 29 telescope corrections were flagged in sub-array 2. ! A total of 3 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 29 telescope corrections were flagged in sub-array 2. ! A total of 3 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 5. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 29 telescope corrections were flagged in sub-array 2. ! A total of 3 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 6. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 29 telescope corrections were flagged in sub-array 2. ! A total of 3 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 7. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 29 telescope corrections were flagged in sub-array 2. ! A total of 3 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 8. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 29 telescope corrections were flagged in sub-array 2. ! A total of 3 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 9. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 29 telescope corrections were flagged in sub-array 2. ! A total of 3 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 10. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 29 telescope corrections were flagged in sub-array 2. ! A total of 3 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 11. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 29 telescope corrections were flagged in sub-array 2. ! A total of 3 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 12. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 29 telescope corrections were flagged in sub-array 2. ! A total of 3 telescope corrections were flagged in sub-array 3. ! ! Fit before self-cal, rms=1.029151Jy sigma=24.794943 ! Fit after self-cal, rms=0.755600Jy sigma=18.247536 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6963 mas, bmaj=1.189 mas, bpa=-5.478 degrees ! Estimated noise=0.409894 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.178537 Jy ! Component: 100 - total flux cleaned = 0.235935 Jy ! Total flux subtracted in 100 components = 0.235935 Jy ! Clean residual min=-0.009319 max=0.024534 Jy/beam ! Clean residual mean=-0.000026 rms=0.002131 Jy/beam ! Combined flux in latest and established models = 0.235935 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.235935 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076372Jy sigma=1.738257 ! Fit after self-cal, rms=0.076197Jy sigma=1.734861 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0270157 Jy ! Component: 100 - total flux cleaned = 0.0406335 Jy ! Total flux subtracted in 100 components = 0.0406335 Jy ! Clean residual min=-0.007566 max=0.007964 Jy/beam ! Clean residual mean=-0.000016 rms=0.001416 Jy/beam ! Combined flux in latest and established models = 0.276568 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 12 components and 0.276568 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064201Jy sigma=1.429600 ! Fit after self-cal, rms=0.064047Jy sigma=1.426486 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9416 mas, bmaj=1.433 mas, bpa=-4.858 degrees ! Estimated noise=0.200023 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0106343 Jy ! Component: 100 - total flux cleaned = 0.0159225 Jy ! Component: 150 - total flux cleaned = 0.0183744 Jy ! Component: 200 - total flux cleaned = 0.0187492 Jy ! Total flux subtracted in 200 components = 0.0187492 Jy ! Clean residual min=-0.007364 max=0.007406 Jy/beam ! Clean residual mean=-0.000024 rms=0.001397 Jy/beam ! Combined flux in latest and established models = 0.295317 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 20 components and 0.295317 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062301Jy sigma=1.385655 ! Fit after self-cal, rms=0.062247Jy sigma=1.384555 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9416 x 1.433 at -4.858 degrees (North through East) ! Clean map min=-0.0068115 max=0.24186 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 1.03 HN 0.96 KP 1.04 ! LA 1.01 MK 1.00 OV 0.98 PT 0.92 ! SC 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.15 FD 1.01 HN 0.87 KP 1.07 ! LA 1.01 MK 1.06 NL 0.97 PT 0.91 ! SC 0.93 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.13 FD 0.99 HN 0.85 KP 0.98 ! LA 1.06 MK 1.06 NL 0.99 OV 0.93 ! PT 0.92 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 1.05 HN 1.04 KP 1.04 ! LA 1.01 MK 1.00 OV 0.95 PT 0.91 ! SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.15 FD 1.03 HN 0.90 KP 1.04 ! LA 1.01 MK 1.04 NL 0.97 PT 0.92 ! SC 0.96 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.14 FD 1.02 HN 0.81 KP 0.99 ! LA 1.07 MK 1.07 NL 0.98 OV 0.93 ! PT 0.91 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 1.04 HN 0.96 KP 1.03 ! LA 0.98 MK 1.01 OV 0.95 PT 0.93 ! SC 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.19 FD 1.01 HN 0.90 KP 1.05 ! LA 1.01 MK 1.03 NL 0.97 PT 0.93 ! SC 0.94 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.15 FD 1.02 HN 0.86 KP 0.97 ! LA 1.06 MK 1.09 NL 0.98 OV 0.91 ! PT 0.91 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 1.05 HN 0.98 KP 1.04 ! LA 1.01 MK 1.01 OV 0.96 PT 0.89 ! SC 0.93 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.14 FD 1.04 HN 0.87 KP 1.06 ! LA 1.03 MK 1.04 NL 0.96 PT 0.92 ! SC 0.95 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.13 FD 1.03 HN 0.86 KP 0.99 ! LA 1.06 MK 1.07 NL 0.99 OV 0.92 ! PT 0.94 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 1.05 HN 1.00 KP 1.02 ! LA 1.00 MK 1.00 OV 0.97 PT 0.94 ! SC 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.16 FD 1.02 HN 0.90 KP 1.05 ! LA 1.02 MK 1.05 NL 0.98 PT 0.93 ! SC 0.97 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.16 FD 1.01 HN 0.86 KP 0.99 ! LA 1.07 MK 1.07 NL 0.97 OV 0.93 ! PT 0.92 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 1.07 HN 1.00 KP 1.05 ! LA 0.99 MK 1.02 OV 0.97 PT 0.91 ! SC 0.93 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.15 FD 1.02 HN 0.88 KP 1.06 ! LA 1.02 MK 1.00 NL 0.97 PT 0.93 ! SC 0.92 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.17 FD 1.00 HN 0.85 KP 0.98 ! LA 1.07 MK 1.06 NL 0.99 OV 0.92 ! PT 0.91 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 1.04 HN 1.09 KP 1.04 ! LA 0.98 MK 1.02 OV 0.94 PT 0.93 ! SC 0.93 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.14 FD 1.05 HN 0.87 KP 1.07 ! LA 1.02 MK 1.04 NL 0.96 PT 0.94 ! SC 0.96 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.13 FD 1.03 HN 0.84 KP 0.98 ! LA 1.06 MK 1.07 NL 1.00 OV 0.94 ! PT 0.92 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.05 HN 0.95 KP 1.05 ! LA 1.00 MK 1.01 OV 0.95 PT 0.93 ! SC 0.91 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.11 FD 1.01 HN 0.90 KP 1.07 ! LA 1.00 MK 1.06 NL 1.00 PT 0.93 ! SC 0.94 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.16 FD 1.03 HN 0.85 KP 1.00 ! LA 1.04 MK 1.04 NL 1.00 OV 0.93 ! PT 0.91 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 1.06 HN 1.00 KP 1.00 ! LA 1.01 MK 1.04 OV 0.97 PT 0.94 ! SC 0.91 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.19 FD 1.03 HN 0.89 KP 1.08 ! LA 1.01 MK 1.04 NL 0.98 PT 0.90 ! SC 0.96 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.15 FD 1.02 HN 0.84 KP 1.01 ! LA 1.05 MK 1.06 NL 0.99 OV 0.92 ! PT 0.92 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 1.05 HN 1.02 KP 1.06 ! LA 1.01 MK 1.03 OV 0.99 PT 0.91 ! SC 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.17 FD 1.02 HN 0.90 KP 1.05 ! LA 1.03 MK 1.05 NL 1.02 PT 0.94 ! SC 0.95 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.15 FD 1.01 HN 0.88 KP 1.00 ! LA 1.08 MK 1.09 NL 1.00 OV 0.94 ! PT 0.91 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 1.04 HN 0.98 KP 1.02 ! LA 1.01 MK 0.98 OV 0.97 PT 0.94 ! SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.24 FD 1.04 HN 0.85 KP 1.03 ! LA 1.01 MK 0.99 NL 0.96 PT 0.94 ! SC 0.95 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.19 FD 1.04 HN 0.85 KP 1.00 ! LA 1.07 MK 1.04 NL 0.97 OV 0.93 ! PT 0.95 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 1.06 HN 1.00 KP 1.04 ! LA 1.01 MK 0.95 OV 0.96 PT 0.95 ! SC 0.94 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.17 FD 1.01 HN 0.86 KP 1.06 ! LA 1.03 MK 0.96 NL 1.00 PT 0.95 ! SC 0.96 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.11 FD 1.02 HN 0.81 KP 1.02 ! LA 1.06 MK 1.01 NL 0.99 OV 0.91 ! PT 0.95 ! ! ! Fit before self-cal, rms=0.062247Jy sigma=1.384555 ! Fit after self-cal, rms=0.056268Jy sigma=1.250440 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9398 mas, bmaj=1.429 mas, bpa=-4.395 degrees ! Estimated noise=0.199481 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.8, -2.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00383066 Jy ! Component: 100 - total flux cleaned = 0.00552378 Jy ! Component: 150 - total flux cleaned = 0.00577333 Jy ! Component: 200 - total flux cleaned = 0.00588155 Jy ! Total flux subtracted in 200 components = 0.00588155 Jy ! Clean residual min=-0.001872 max=0.003146 Jy/beam ! Clean residual mean=-0.000002 rms=0.000444 Jy/beam ! Combined flux in latest and established models = 0.301199 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 40 components and 0.301199 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055987Jy sigma=1.242981 ! Fit after self-cal, rms=0.055984Jy sigma=1.242175 ! Inverting map ! Added new window around map position (0.2, -6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00324692 Jy ! Component: 100 - total flux cleaned = 0.0050824 Jy ! Component: 150 - total flux cleaned = 0.00581715 Jy ! Component: 200 - total flux cleaned = 0.00607375 Jy ! Total flux subtracted in 200 components = 0.00607375 Jy ! Clean residual min=-0.001762 max=0.001799 Jy/beam ! Clean residual mean=0.000001 rms=0.000353 Jy/beam ! Combined flux in latest and established models = 0.307273 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 60 components and 0.307273 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055777Jy sigma=1.236939 ! Fit after self-cal, rms=0.055764Jy sigma=1.236627 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055764Jy sigma=1.236627 ! Fit after self-cal, rms=0.055742Jy sigma=1.235359 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9395 mas, bmaj=1.425 mas, bpa=-4.483 degrees ! Estimated noise=0.199219 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00163448 Jy ! Component: 100 - total flux cleaned = 0.00230879 Jy ! Component: 150 - total flux cleaned = 0.0027817 Jy ! Component: 200 - total flux cleaned = 0.00305093 Jy ! Total flux subtracted in 200 components = 0.00305093 Jy ! Clean residual min=-0.001328 max=0.001394 Jy/beam ! Clean residual mean=0.000001 rms=0.000296 Jy/beam ! Combined flux in latest and established models = 0.310324 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 68 components and 0.310324 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055671Jy sigma=1.233586 ! Fit after self-cal, rms=0.055668Jy sigma=1.233426 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (12, 27.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00138133 Jy ! Component: 100 - total flux cleaned = 0.00171634 Jy ! Component: 150 - total flux cleaned = 0.00183828 Jy ! Component: 200 - total flux cleaned = 0.00189172 Jy ! Total flux subtracted in 200 components = 0.00189172 Jy ! Clean residual min=-0.001238 max=0.001199 Jy/beam ! Clean residual mean=0.000002 rms=0.000275 Jy/beam ! Combined flux in latest and established models = 0.312215 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 86 components and 0.312215 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055621Jy sigma=1.232257 ! Fit after self-cal, rms=0.055619Jy sigma=1.232207 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055619Jy sigma=1.232207 ! Fit after self-cal, rms=0.055674Jy sigma=1.231955 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9397 mas, bmaj=1.423 mas, bpa=-4.487 degrees ! Estimated noise=0.199235 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000683156 Jy ! Component: 100 - total flux cleaned = 0.000885009 Jy ! Component: 150 - total flux cleaned = 0.00101298 Jy ! Component: 200 - total flux cleaned = 0.00110688 Jy ! Total flux subtracted in 200 components = 0.00110688 Jy ! Clean residual min=-0.001142 max=0.001135 Jy/beam ! Clean residual mean=0.000001 rms=0.000259 Jy/beam ! Combined flux in latest and established models = 0.313322 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 95 components and 0.313322 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055649Jy sigma=1.231324 ! Fit after self-cal, rms=0.055649Jy sigma=1.231283 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000235273 Jy ! Component: 100 - total flux cleaned = 0.000323427 Jy ! Component: 150 - total flux cleaned = 0.000343824 Jy ! Component: 200 - total flux cleaned = 0.000383349 Jy ! Total flux subtracted in 200 components = 0.000383349 Jy ! Clean residual min=-0.001085 max=0.001102 Jy/beam ! Clean residual mean=0.000002 rms=0.000254 Jy/beam ! Combined flux in latest and established models = 0.313706 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 103 components and 0.313706 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055634Jy sigma=1.230910 ! Fit after self-cal, rms=0.055633Jy sigma=1.230889 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055633Jy sigma=1.230889 ! Fit after self-cal, rms=0.055671Jy sigma=1.230807 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.407 mas, bmaj=2.537 mas, bpa=74.28 degrees ! Estimated noise=0.256345 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000674003 Jy ! Component: 100 - total flux cleaned = 0.000872128 Jy ! Component: 150 - total flux cleaned = 0.000953697 Jy ! Component: 200 - total flux cleaned = 0.00102396 Jy ! Total flux subtracted in 200 components = 0.00102396 Jy ! Clean residual min=-0.001173 max=0.001168 Jy/beam ! Clean residual mean=0.000003 rms=0.000331 Jy/beam ! Combined flux in latest and established models = 0.31473 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 119 components and 0.31473 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055665Jy sigma=1.230705 ! Fit after self-cal, rms=0.055665Jy sigma=1.230682 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000210049 Jy ! Component: 100 - total flux cleaned = 0.000235529 Jy ! Component: 150 - total flux cleaned = 0.000268663 Jy ! Component: 200 - total flux cleaned = 0.00027857 Jy ! Total flux subtracted in 200 components = 0.00027857 Jy ! Clean residual min=-0.001150 max=0.001109 Jy/beam ! Clean residual mean=0.000004 rms=0.000324 Jy/beam ! Combined flux in latest and established models = 0.315008 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 123 components and 0.315008 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055663Jy sigma=1.230618 ! Fit after self-cal, rms=0.055663Jy sigma=1.230606 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.9398 mas, bmaj=1.421 mas, bpa=-4.498 degrees ! Estimated noise=0.199284 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9398 x 1.421 at -4.498 degrees (North through East) ! Clean map min=-0.0009813 max=0.24163 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6931 mas, bmaj=1.177 mas, bpa=-5.131 degrees ! Estimated noise=0.407511 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.177992 Jy ! Component: 100 - total flux cleaned = 0.237501 Jy ! Component: 150 - total flux cleaned = 0.265105 Jy ! Component: 200 - total flux cleaned = 0.279258 Jy ! Total flux subtracted in 200 components = 0.279258 Jy ! Clean residual min=-0.003715 max=0.006724 Jy/beam ! Clean residual mean=-0.000006 rms=0.000805 Jy/beam ! Combined flux in latest and established models = 0.279258 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.279258 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9398 mas, bmaj=1.421 mas, bpa=-4.498 degrees ! Estimated noise=0.199284 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00946727 Jy ! Component: 100 - total flux cleaned = 0.0154066 Jy ! Component: 150 - total flux cleaned = 0.0197647 Jy ! Component: 200 - total flux cleaned = 0.0230646 Jy ! Total flux subtracted in 200 components = 0.0230646 Jy ! Clean residual min=-0.001654 max=0.002113 Jy/beam ! Clean residual mean=-0.000004 rms=0.000385 Jy/beam ! Combined flux in latest and established models = 0.302322 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 39 components and 0.302322 Jy ! Inverting map ! Added new window around map position (1.6, -6.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00264254 Jy ! Component: 100 - total flux cleaned = 0.00476219 Jy ! Component: 150 - total flux cleaned = 0.00648741 Jy ! Component: 200 - total flux cleaned = 0.00790516 Jy ! Total flux subtracted in 200 components = 0.00790516 Jy ! Clean residual min=-0.001310 max=0.001158 Jy/beam ! Clean residual mean=-0.000000 rms=0.000275 Jy/beam ! Combined flux in latest and established models = 0.310227 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 53 components and 0.310227 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.407 mas, bmaj=2.537 mas, bpa=74.28 degrees ! Estimated noise=0.256345 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00166318 Jy ! Component: 100 - total flux cleaned = 0.00281397 Jy ! Component: 150 - total flux cleaned = 0.00364312 Jy ! Component: 200 - total flux cleaned = 0.00425305 Jy ! Total flux subtracted in 200 components = 0.00425305 Jy ! Clean residual min=-0.001153 max=0.001141 Jy/beam ! Clean residual mean=0.000002 rms=0.000327 Jy/beam ! Combined flux in latest and established models = 0.314481 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000287038 Jy ! Component: 100 - total flux cleaned = 0.000493805 Jy ! Component: 150 - total flux cleaned = 0.000655628 Jy ! Component: 200 - total flux cleaned = 0.000805669 Jy ! Total flux subtracted in 200 components = 0.000805669 Jy ! Clean residual min=-0.001119 max=0.001147 Jy/beam ! Clean residual mean=0.000003 rms=0.000319 Jy/beam ! Combined flux in latest and established models = 0.315286 Jy ! Adding 59 model components to the UV plane model. ! The established model now contains 106 components and 0.315286 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9398 mas, bmaj=1.421 mas, bpa=-4.498 degrees ! Estimated noise=0.199284 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0002931 Jy ! Component: 100 - total flux cleaned = -0.000269702 Jy ! Component: 150 - total flux cleaned = -0.000221669 Jy ! Component: 200 - total flux cleaned = -0.000176161 Jy ! Total flux subtracted in 200 components = -0.000176161 Jy ! Clean residual min=-0.001158 max=0.001096 Jy/beam ! Clean residual mean=0.000001 rms=0.000242 Jy/beam ! Combined flux in latest and established models = 0.31511 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 121 components and 0.31511 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055665Jy sigma=1.230581 ! Fit after self-cal, rms=0.055662Jy sigma=1.230485 wmodel J1912+3740_X_map.mod ! Writing 121 model components to file: J1912+3740_X_map.mod wobs J1912+3740_X_uvs.fits ! Writing UV FITS file: J1912+3740_X_uvs.fits wwins J1912+3740_X_map.win ! wwins: Wrote 5 windows to J1912+3740_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000108491 Jy ! Component: 100 - total flux cleaned = -0.000109753 Jy ! Component: 150 - total flux cleaned = -0.000197943 Jy ! Component: 200 - total flux cleaned = -0.000181483 Jy ! Component: 250 - total flux cleaned = -0.000165764 Jy ! Component: 300 - total flux cleaned = -0.000150015 Jy ! Component: 350 - total flux cleaned = -0.000103778 Jy ! Component: 400 - total flux cleaned = -8.87625e-05 Jy ! Component: 450 - total flux cleaned = -0.000118172 Jy ! Component: 500 - total flux cleaned = -0.000132486 Jy ! Component: 550 - total flux cleaned = -0.000103957 Jy ! Component: 600 - total flux cleaned = -0.000117563 Jy ! Component: 650 - total flux cleaned = -9.01285e-05 Jy ! Component: 700 - total flux cleaned = -0.00010338 Jy ! Component: 750 - total flux cleaned = -7.69812e-05 Jy ! Component: 800 - total flux cleaned = -3.80403e-05 Jy ! Component: 850 - total flux cleaned = -1.24961e-05 Jy ! Component: 900 - total flux cleaned = 1.27825e-05 Jy ! Component: 950 - total flux cleaned = 7.53464e-05 Jy ! Component: 1000 - total flux cleaned = 0.000112548 Jy ! Component: 1050 - total flux cleaned = 0.000161537 Jy ! Component: 1100 - total flux cleaned = 0.000209917 Jy ! Component: 1150 - total flux cleaned = 0.000245729 Jy ! Component: 1200 - total flux cleaned = 0.000304762 Jy ! Component: 1250 - total flux cleaned = 0.000374649 Jy ! Component: 1300 - total flux cleaned = 0.000397724 Jy ! Component: 1350 - total flux cleaned = 0.000420488 Jy ! Component: 1400 - total flux cleaned = 0.000409246 Jy ! Component: 1450 - total flux cleaned = 0.000487692 Jy ! Component: 1500 - total flux cleaned = 0.000487577 Jy ! Component: 1550 - total flux cleaned = 0.00052059 Jy ! Component: 1600 - total flux cleaned = 0.000564207 Jy ! Component: 1650 - total flux cleaned = 0.000575077 Jy ! Component: 1700 - total flux cleaned = 0.000607224 Jy ! Component: 1750 - total flux cleaned = 0.000628599 Jy ! Component: 1800 - total flux cleaned = 0.000681237 Jy ! Component: 1850 - total flux cleaned = 0.000649999 Jy ! Component: 1900 - total flux cleaned = 0.000712145 Jy ! Component: 1950 - total flux cleaned = 0.000722274 Jy ! Component: 2000 - total flux cleaned = 0.000742582 Jy ! Component: 2050 - total flux cleaned = 0.000752711 Jy ! Component: 2100 - total flux cleaned = 0.000762766 Jy ! Component: 2150 - total flux cleaned = 0.000832311 Jy ! Component: 2200 - total flux cleaned = 0.000832138 Jy ! Component: 2250 - total flux cleaned = 0.000841912 Jy ! Component: 2300 - total flux cleaned = 0.000841903 Jy ! Component: 2350 - total flux cleaned = 0.000870761 Jy ! Component: 2400 - total flux cleaned = 0.000880418 Jy ! Component: 2450 - total flux cleaned = 0.000880392 Jy ! Component: 2500 - total flux cleaned = 0.000899344 Jy ! Component: 2550 - total flux cleaned = 0.000908798 Jy ! Component: 2600 - total flux cleaned = 0.000899444 Jy ! Component: 2650 - total flux cleaned = 0.000908693 Jy ! Component: 2700 - total flux cleaned = 0.000917856 Jy ! Component: 2750 - total flux cleaned = 0.000945261 Jy ! Component: 2800 - total flux cleaned = 0.00098154 Jy ! Component: 2850 - total flux cleaned = 0.000945423 Jy ! Component: 2900 - total flux cleaned = 0.00101712 Jy ! Component: 2950 - total flux cleaned = 0.001026 Jy ! Component: 3000 - total flux cleaned = 0.0010703 Jy ! Component: 3050 - total flux cleaned = 0.00104392 Jy ! Component: 3100 - total flux cleaned = 0.00107888 Jy ! Component: 3150 - total flux cleaned = 0.00109628 Jy ! Component: 3200 - total flux cleaned = 0.00113955 Jy ! Component: 3250 - total flux cleaned = 0.00114817 Jy ! Component: 3300 - total flux cleaned = 0.00119094 Jy ! Component: 3350 - total flux cleaned = 0.00120795 Jy ! Component: 3400 - total flux cleaned = 0.00123322 Jy ! Component: 3450 - total flux cleaned = 0.00126686 Jy ! Component: 3500 - total flux cleaned = 0.00130864 Jy ! Component: 3550 - total flux cleaned = 0.00132525 Jy ! Component: 3600 - total flux cleaned = 0.00138325 Jy ! Component: 3650 - total flux cleaned = 0.00139144 Jy ! Component: 3700 - total flux cleaned = 0.00144057 Jy ! Component: 3750 - total flux cleaned = 0.00148943 Jy ! Component: 3800 - total flux cleaned = 0.00149753 Jy ! Component: 3850 - total flux cleaned = 0.00150557 Jy ! Component: 3900 - total flux cleaned = 0.00152964 Jy ! Component: 3950 - total flux cleaned = 0.0015616 Jy ! Component: 4000 - total flux cleaned = 0.00158543 Jy ! Component: 4050 - total flux cleaned = 0.00161705 Jy ! Total flux subtracted in 4096 components = 0.00161706 Jy ! Clean residual min=-0.000513 max=0.000522 Jy/beam ! Clean residual mean=0.000001 rms=0.000133 Jy/beam ! Combined flux in latest and established models = 0.316727 Jy keep ! Adding 317 model components to the UV plane model. ! The established model now contains 438 components and 0.316727 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J1912+3740_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9398 x 1.421 at -4.498 degrees (North through East) ! Clean map min=-0.00072414 max=0.24112 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J1912+3740_X_map.fits wmodel /vlbi/uf001/uva//J1912+3740_X_map.mod ! Writing 438 model components to file: /vlbi/uf001/uva//J1912+3740_X_map.mod wobs /vlbi/uf001/uva//J1912+3740_X_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J1912+3740_X_uvs.fits wwins /vlbi/uf001/uva//J1912+3740_X_map.win ! wwins: Wrote 6 windows to /vlbi/uf001/uva//J1912+3740_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.241123 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000132651 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.165042 0.165042 0.330084 0.660168 1.32034 2.64067 5.28135 10.5627 21.1254 42.2508 84.5015 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.241 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1817.72 quit ! Quitting program ! Log file /vlbi/uf001/uva//J1912+3740_X_dfm.log closed on Mon Jan 14 04:58:08 2019