! Started logfile: /vlbi/uf001/uva//J1911-2102_S_dfm.log on Mon Jan 14 04:57:45 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J1911-2102_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J1911-2102_S_uva.fits
! AN table 1: 48 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.965278 visibilities/baseline/integration-bin.
! Found source: J1911-2102
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 2919 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1911-2102_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.192694Jy  sigma=17.623289
! Fit after  self-cal, rms=0.469938Jy  sigma=7.000461
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.742 mas, bmaj=32.11 mas, bpa=-6.843 degrees
! Estimated noise=1.23018 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.415387 Jy
! Component: 100  -  total flux cleaned = 0.560739 Jy
! Total flux subtracted in 100 components = 0.560739 Jy
! Clean residual min=-0.029700 max=0.067319 Jy/beam
! Clean residual mean=-0.000243 rms=0.012483 Jy/beam
! Combined flux in latest and established models = 0.560739 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.560739 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.159054Jy  sigma=2.286269
! Fit after  self-cal, rms=0.157671Jy  sigma=2.266633
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.443 mas, bmaj=32.49 mas, bpa=-6.771 degrees
! Estimated noise=0.892936 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.094217 Jy
! Component: 100  -  total flux cleaned = 0.14026 Jy
! Component: 150  -  total flux cleaned = 0.16717 Jy
! Component: 200  -  total flux cleaned = 0.184151 Jy
! Total flux subtracted in 200 components = 0.184151 Jy
! Clean residual min=-0.015388 max=0.021540 Jy/beam
! Clean residual mean=-0.000138 rms=0.005281 Jy/beam
! Combined flux in latest and established models = 0.744891 Jy
! Performing phase self-cal
! Adding 99 model components to the UV plane model.
! The established model now contains 110 components and 0.744891 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.087459Jy  sigma=1.273229
! Fit after  self-cal, rms=0.086111Jy  sigma=1.251847
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.443 x 32.49 at -6.771 degrees (North through East)
! Clean map  min=-0.014706  max=0.56338 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.98     HN        1.05     KP        0.99     LA        0.93     
!   NL        1.06     OV        1.02     PT        0.99     
! 
! 
! Correcting IF 2.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.96     HN        1.07     KP        1.01     LA        0.93     
!   NL        1.05     OV        0.95     PT        0.99     
! 
! 
! Correcting IF 3.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.98     HN        1.06     KP        1.00     LA        0.94     
!   NL        1.02     OV        1.00     PT        1.00     
! 
! 
! Fit before self-cal, rms=0.086111Jy  sigma=1.251847
! Fit after  self-cal, rms=0.080136Jy  sigma=1.153091
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.531 mas, bmaj=32.5 mas, bpa=-6.699 degrees
! Estimated noise=0.892309 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (9, -9).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00324765 Jy
! Component: 100  -  total flux cleaned = 0.00500754 Jy
! Component: 150  -  total flux cleaned = 0.00801106 Jy
! Component: 200  -  total flux cleaned = 0.0098945 Jy
! Total flux subtracted in 200 components = 0.0098945 Jy
! Clean residual min=-0.008373 max=0.008091 Jy/beam
! Clean residual mean=-0.000033 rms=0.002512 Jy/beam
! Combined flux in latest and established models = 0.754785 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 138 components and 0.754785 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.075597Jy  sigma=1.089557
! Fit after  self-cal, rms=0.075347Jy  sigma=1.085250
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.075347Jy  sigma=1.085250
! Fit after  self-cal, rms=0.074076Jy  sigma=1.061889
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.535 mas, bmaj=32.44 mas, bpa=-6.77 degrees
! Estimated noise=0.890868 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0018649 Jy
! Component: 100  -  total flux cleaned = 0.0035421 Jy
! Component: 150  -  total flux cleaned = 0.00530424 Jy
! Component: 200  -  total flux cleaned = 0.00692111 Jy
! Total flux subtracted in 200 components = 0.00692111 Jy
! Clean residual min=-0.005539 max=0.005307 Jy/beam
! Clean residual mean=-0.000024 rms=0.001628 Jy/beam
! Combined flux in latest and established models = 0.761706 Jy
selfcal
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 165 components and 0.761706 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.073076Jy  sigma=1.048734
! Fit after  self-cal, rms=0.073011Jy  sigma=1.047436
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00122603 Jy
! Component: 100  -  total flux cleaned = 0.00185674 Jy
! Component: 150  -  total flux cleaned = 0.002774 Jy
! Component: 200  -  total flux cleaned = 0.0034395 Jy
! Total flux subtracted in 200 components = 0.0034395 Jy
! Clean residual min=-0.004792 max=0.004390 Jy/beam
! Clean residual mean=-0.000019 rms=0.001470 Jy/beam
! Combined flux in latest and established models = 0.765146 Jy
! Performing phase self-cal
! Adding 44 model components to the UV plane model.
! The established model now contains 201 components and 0.765146 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.072707Jy  sigma=1.043796
! Fit after  self-cal, rms=0.072692Jy  sigma=1.043487
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.072692Jy  sigma=1.043487
! Fit after  self-cal, rms=0.072790Jy  sigma=1.039697
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.545 mas, bmaj=32.4 mas, bpa=-6.804 degrees
! Estimated noise=0.891181 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000833881 Jy
! Component: 100  -  total flux cleaned = 0.000637775 Jy
! Component: 150  -  total flux cleaned = 0.00179771 Jy
! Component: 200  -  total flux cleaned = 0.0024591 Jy
! Total flux subtracted in 200 components = 0.0024591 Jy
! Clean residual min=-0.004048 max=0.003653 Jy/beam
! Clean residual mean=-0.000015 rms=0.001230 Jy/beam
! Combined flux in latest and established models = 0.767605 Jy
selfcal
! Performing phase self-cal
! Adding 74 model components to the UV plane model.
! The established model now contains 272 components and 0.767605 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.072544Jy  sigma=1.036346
! Fit after  self-cal, rms=0.072544Jy  sigma=1.036098
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000444351 Jy
! Component: 100  -  total flux cleaned = 0.0014749 Jy
! Component: 150  -  total flux cleaned = 0.00226236 Jy
! Component: 200  -  total flux cleaned = 0.00277286 Jy
! Total flux subtracted in 200 components = 0.00277286 Jy
! Clean residual min=-0.003810 max=0.003483 Jy/beam
! Clean residual mean=-0.000012 rms=0.001164 Jy/beam
! Combined flux in latest and established models = 0.770378 Jy
! Performing phase self-cal
! Adding 65 model components to the UV plane model.
! The established model now contains 325 components and 0.770378 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.072441Jy  sigma=1.034760
! Fit after  self-cal, rms=0.072436Jy  sigma=1.034636
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.072436Jy  sigma=1.034636
! Fit after  self-cal, rms=0.072592Jy  sigma=1.033923
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.884 mas, bmaj=32.72 mas, bpa=-6.356 degrees
! Estimated noise=0.959206 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00152392 Jy
! Component: 100  -  total flux cleaned = 0.00233673 Jy
! Component: 150  -  total flux cleaned = 0.00288094 Jy
! Component: 200  -  total flux cleaned = 0.00342673 Jy
! Total flux subtracted in 200 components = 0.00342673 Jy
! Clean residual min=-0.003503 max=0.003317 Jy/beam
! Clean residual mean=-0.000012 rms=0.001177 Jy/beam
! Combined flux in latest and established models = 0.773805 Jy
selfcal
! Performing phase self-cal
! Adding 64 model components to the UV plane model.
! The established model now contains 383 components and 0.773805 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.072512Jy  sigma=1.032919
! Fit after  self-cal, rms=0.072512Jy  sigma=1.032825
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00040442 Jy
! Component: 100  -  total flux cleaned = 0.000867839 Jy
! Component: 150  -  total flux cleaned = 0.00114925 Jy
! Component: 200  -  total flux cleaned = 0.00137528 Jy
! Total flux subtracted in 200 components = 0.00137528 Jy
! Clean residual min=-0.003491 max=0.003126 Jy/beam
! Clean residual mean=-0.000010 rms=0.001147 Jy/beam
! Combined flux in latest and established models = 0.77518 Jy
! Performing phase self-cal
! Adding 52 model components to the UV plane model.
! The established model now contains 416 components and 0.77518 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.072478Jy  sigma=1.032392
! Fit after  self-cal, rms=0.072476Jy  sigma=1.032350
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=5.551 mas, bmaj=32.39 mas, bpa=-6.816 degrees
! Estimated noise=0.89159 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.551 x 32.39 at -6.816 degrees (North through East)
! Clean map  min=-0.0035277  max=0.55798 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.072476Jy  sigma=1.032350
! Fit after  self-cal, rms=0.067411Jy  sigma=0.939610
! Inverting map and beam 
! Estimated beam: bmin=5.557 mas, bmaj=32.36 mas, bpa=-6.815 degrees
! Estimated noise=0.891442 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.99051e-05 Jy
! Component: 100  -  total flux cleaned = 0.000487039 Jy
! Component: 150  -  total flux cleaned = 0.000878743 Jy
! Component: 200  -  total flux cleaned = 0.00135459 Jy
! Total flux subtracted in 200 components = 0.00135459 Jy
! Clean residual min=-0.003332 max=0.003020 Jy/beam
! Clean residual mean=-0.000011 rms=0.000980 Jy/beam
! Combined flux in latest and established models = 0.776535 Jy
! Performing phase self-cal
! Adding 64 model components to the UV plane model.
! The established model now contains 464 components and 0.776535 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.067323Jy  sigma=0.938322
! Fit after  self-cal, rms=0.067321Jy  sigma=0.938263
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000193374 Jy
! Component: 100  -  total flux cleaned = 0.000528558 Jy
! Component: 150  -  total flux cleaned = 0.00079753 Jy
! Component: 200  -  total flux cleaned = 0.000921711 Jy
! Total flux subtracted in 200 components = 0.000921711 Jy
! Clean residual min=-0.003279 max=0.002966 Jy/beam
! Clean residual mean=-0.000010 rms=0.000956 Jy/beam
! Combined flux in latest and established models = 0.777456 Jy
! Performing phase self-cal
! Adding 73 model components to the UV plane model.
! The established model now contains 511 components and 0.777456 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.067282Jy  sigma=0.937774
! Fit after  self-cal, rms=0.067281Jy  sigma=0.937738
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.067281Jy  sigma=0.937738
! Fit after  self-cal, rms=0.067416Jy  sigma=0.937361
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.838 mas, bmaj=31.98 mas, bpa=-6.964 degrees
! Estimated noise=1.24131 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.414154 Jy
! Component: 100  -  total flux cleaned = 0.558755 Jy
! Component: 150  -  total flux cleaned = 0.631676 Jy
! Component: 200  -  total flux cleaned = 0.670774 Jy
! Total flux subtracted in 200 components = 0.670774 Jy
! Clean residual min=-0.010586 max=0.019673 Jy/beam
! Clean residual mean=-0.000093 rms=0.004171 Jy/beam
! Combined flux in latest and established models = 0.670774 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 28 model components to the UV plane model.
! The established model now contains 28 components and 0.670774 Jy
! Inverting map and beam 
! Estimated beam: bmin=5.562 mas, bmaj=32.35 mas, bpa=-6.822 degrees
! Estimated noise=0.891749 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0289972 Jy
! Component: 100  -  total flux cleaned = 0.045731 Jy
! Component: 150  -  total flux cleaned = 0.0563407 Jy
! Component: 200  -  total flux cleaned = 0.0640798 Jy
! Total flux subtracted in 200 components = 0.0640798 Jy
! Clean residual min=-0.005864 max=0.006285 Jy/beam
! Clean residual mean=-0.000055 rms=0.001818 Jy/beam
! Combined flux in latest and established models = 0.734854 Jy
! Adding 77 model components to the UV plane model.
! The established model now contains 104 components and 0.734854 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.898 mas, bmaj=32.67 mas, bpa=-6.346 degrees
! Estimated noise=0.958062 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00730992 Jy
! Component: 100  -  total flux cleaned = 0.0129209 Jy
! Component: 150  -  total flux cleaned = 0.0174644 Jy
! Component: 200  -  total flux cleaned = 0.021226 Jy
! Total flux subtracted in 200 components = 0.021226 Jy
! Clean residual min=-0.004659 max=0.004266 Jy/beam
! Clean residual mean=-0.000045 rms=0.001494 Jy/beam
! Combined flux in latest and established models = 0.75608 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00315139 Jy
! Component: 100  -  total flux cleaned = 0.00580961 Jy
! Component: 150  -  total flux cleaned = 0.00808655 Jy
! Component: 200  -  total flux cleaned = 0.0100861 Jy
! Total flux subtracted in 200 components = 0.0100861 Jy
! Clean residual min=-0.004003 max=0.003610 Jy/beam
! Clean residual mean=-0.000029 rms=0.001220 Jy/beam
! Combined flux in latest and established models = 0.766166 Jy
! Adding 160 model components to the UV plane model.
! The established model now contains 258 components and 0.766166 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=5.562 mas, bmaj=32.35 mas, bpa=-6.822 degrees
! Estimated noise=0.891749 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0015394 Jy
! Component: 100  -  total flux cleaned = 0.00296266 Jy
! Component: 150  -  total flux cleaned = 0.00421691 Jy
! Component: 200  -  total flux cleaned = 0.00518449 Jy
! Total flux subtracted in 200 components = 0.00518449 Jy
! Clean residual min=-0.003431 max=0.002766 Jy/beam
! Clean residual mean=-0.000016 rms=0.000965 Jy/beam
! Combined flux in latest and established models = 0.771351 Jy
selfcal
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 293 components and 0.771351 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.067452Jy  sigma=0.937439
! Fit after  self-cal, rms=0.067435Jy  sigma=0.937175
wmodel J1911-2102_S_map.mod
! Writing 293 model components to file: J1911-2102_S_map.mod
wobs   J1911-2102_S_uvs.fits
! Writing UV FITS file: J1911-2102_S_uvs.fits
wwins  J1911-2102_S_map.win
! wwins: Wrote 2 windows to J1911-2102_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000631284 Jy
! Component: 100  -  total flux cleaned = -0.00107765 Jy
! Component: 150  -  total flux cleaned = -0.00145136 Jy
! Component: 200  -  total flux cleaned = -0.00184545 Jy
! Component: 250  -  total flux cleaned = -0.00197137 Jy
! Component: 300  -  total flux cleaned = -0.00201235 Jy
! Component: 350  -  total flux cleaned = -0.00205157 Jy
! Component: 400  -  total flux cleaned = -0.002016 Jy
! Component: 450  -  total flux cleaned = -0.00198218 Jy
! Component: 500  -  total flux cleaned = -0.00194809 Jy
! Component: 550  -  total flux cleaned = -0.0019477 Jy
! Component: 600  -  total flux cleaned = -0.00194679 Jy
! Component: 650  -  total flux cleaned = -0.0018867 Jy
! Component: 700  -  total flux cleaned = -0.00185753 Jy
! Component: 750  -  total flux cleaned = -0.00182969 Jy
! Component: 800  -  total flux cleaned = -0.00185643 Jy
! Component: 850  -  total flux cleaned = -0.00196103 Jy
! Component: 900  -  total flux cleaned = -0.00201148 Jy
! Component: 950  -  total flux cleaned = -0.00206122 Jy
! Component: 1000  -  total flux cleaned = -0.00210996 Jy
! Component: 1050  -  total flux cleaned = -0.00222778 Jy
! Component: 1100  -  total flux cleaned = -0.00234327 Jy
! Component: 1150  -  total flux cleaned = -0.00241024 Jy
! Component: 1200  -  total flux cleaned = -0.0024545 Jy
! Component: 1250  -  total flux cleaned = -0.00260566 Jy
! Component: 1300  -  total flux cleaned = -0.00269001 Jy
! Component: 1350  -  total flux cleaned = -0.00275226 Jy
! Component: 1400  -  total flux cleaned = -0.00285401 Jy
! Component: 1450  -  total flux cleaned = -0.00295347 Jy
! Component: 1500  -  total flux cleaned = -0.00297296 Jy
! Component: 1550  -  total flux cleaned = -0.00303068 Jy
! Component: 1600  -  total flux cleaned = -0.00304968 Jy
! Component: 1650  -  total flux cleaned = -0.00312405 Jy
! Component: 1700  -  total flux cleaned = -0.00316055 Jy
! Component: 1750  -  total flux cleaned = -0.00321454 Jy
! Component: 1800  -  total flux cleaned = -0.00328552 Jy
! Component: 1850  -  total flux cleaned = -0.00333757 Jy
! Component: 1900  -  total flux cleaned = -0.00333748 Jy
! Component: 1950  -  total flux cleaned = -0.00337144 Jy
! Component: 2000  -  total flux cleaned = -0.0034048 Jy
! Component: 2050  -  total flux cleaned = -0.00343769 Jy
! Component: 2100  -  total flux cleaned = -0.00345422 Jy
! Component: 2150  -  total flux cleaned = -0.00348655 Jy
! Component: 2200  -  total flux cleaned = -0.00353434 Jy
! Component: 2250  -  total flux cleaned = -0.00359708 Jy
! Component: 2300  -  total flux cleaned = -0.003644 Jy
! Component: 2350  -  total flux cleaned = -0.00375187 Jy
! Component: 2400  -  total flux cleaned = -0.0037823 Jy
! Component: 2450  -  total flux cleaned = -0.00387311 Jy
! Component: 2500  -  total flux cleaned = -0.003933 Jy
! Component: 2550  -  total flux cleaned = -0.00402201 Jy
! Component: 2600  -  total flux cleaned = -0.00409546 Jy
! Component: 2650  -  total flux cleaned = -0.00416832 Jy
! Component: 2700  -  total flux cleaned = -0.00422612 Jy
! Component: 2750  -  total flux cleaned = -0.0042835 Jy
! Component: 2800  -  total flux cleaned = -0.00435474 Jy
! Component: 2850  -  total flux cleaned = -0.00441137 Jy
! Component: 2900  -  total flux cleaned = -0.00446766 Jy
! Component: 2950  -  total flux cleaned = -0.00455143 Jy
! Component: 3000  -  total flux cleaned = -0.00463455 Jy
! Component: 3050  -  total flux cleaned = -0.00470336 Jy
! Component: 3100  -  total flux cleaned = -0.00477178 Jy
! Component: 3150  -  total flux cleaned = -0.00483982 Jy
! Component: 3200  -  total flux cleaned = -0.00493458 Jy
! Component: 3250  -  total flux cleaned = -0.00498834 Jy
! Component: 3300  -  total flux cleaned = -0.00504203 Jy
! Component: 3350  -  total flux cleaned = -0.00513539 Jy
! Component: 3400  -  total flux cleaned = -0.00524147 Jy
! Component: 3450  -  total flux cleaned = -0.00532062 Jy
! Component: 3500  -  total flux cleaned = -0.00538624 Jy
! Component: 3550  -  total flux cleaned = -0.00546472 Jy
! Component: 3600  -  total flux cleaned = -0.00555575 Jy
! Component: 3650  -  total flux cleaned = -0.0056464 Jy
! Component: 3700  -  total flux cleaned = -0.00574948 Jy
! Component: 3750  -  total flux cleaned = -0.0058265 Jy
! Component: 3800  -  total flux cleaned = -0.00590316 Jy
! Component: 3850  -  total flux cleaned = -0.00597966 Jy
! Component: 3900  -  total flux cleaned = -0.00605591 Jy
! Component: 3950  -  total flux cleaned = -0.0061698 Jy
! Component: 4000  -  total flux cleaned = -0.00623279 Jy
! Component: 4050  -  total flux cleaned = -0.0062831 Jy
! Total flux subtracted in 4096 components = -0.0063459 Jy
! Clean residual min=-0.000771 max=0.000774 Jy/beam
! Clean residual mean=0.000000 rms=0.000251 Jy/beam
! Combined flux in latest and established models = 0.765005 Jy
keep
! Adding 418 model components to the UV plane model.
! The established model now contains 711 components and 0.765004 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J1911-2102_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.562 x 32.35 at -6.822 degrees (North through East)
! Clean map  min=-0.0024142  max=0.55898 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J1911-2102_S_map.fits
wmodel /vlbi/uf001/uva//J1911-2102_S_map.mod
! Writing 711 model components to file: /vlbi/uf001/uva//J1911-2102_S_map.mod
wobs   /vlbi/uf001/uva//J1911-2102_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J1911-2102_S_uvs.fits
wwins  /vlbi/uf001/uva//J1911-2102_S_map.win
! wwins: Wrote 3 windows to /vlbi/uf001/uva//J1911-2102_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.558976 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000232242 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.124643 0.124643 0.249286 0.498572 0.997144 1.99429 3.98857 7.97715 15.9543 31.9086 63.8172
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.558 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  2406.87 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J1911-2102_S_dfm.log closed on Mon Jan 14 04:57:50 2019