! Started logfile: /vlbi/uf001/uva//J1911+2658_X_dfm.log on Mon Jan 14 04:57:27 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uva//J1911+2658_X_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J1911+2658_X_uva.fits ! AN table 1: 57 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.849903 visibilities/baseline/integration-bin. ! Found source: J1911+2658 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 26160 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1911+2658_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 71 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 71 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 71 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 71 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 71 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 71 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 71 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 71 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 71 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 71 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 71 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 71 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.019552Jy sigma=25.877972 ! Fit after self-cal, rms=0.855986Jy sigma=21.872619 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.729 mas, bmaj=1.535 mas, bpa=-14.07 degrees ! Estimated noise=0.307297 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.110061 Jy ! Component: 100 - total flux cleaned = 0.146074 Jy ! Total flux subtracted in 100 components = 0.146074 Jy ! Clean residual min=-0.016621 max=0.063906 Jy/beam ! Clean residual mean=-0.000007 rms=0.004124 Jy/beam ! Combined flux in latest and established models = 0.146074 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.146074 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.117232Jy sigma=2.931251 ! Fit after self-cal, rms=0.116289Jy sigma=2.908306 ! Inverting map ! Added new window around map position (-2.2, -1.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0529575 Jy ! Component: 100 - total flux cleaned = 0.07371 Jy ! Total flux subtracted in 100 components = 0.07371 Jy ! Clean residual min=-0.010872 max=0.028479 Jy/beam ! Clean residual mean=-0.000008 rms=0.002762 Jy/beam ! Combined flux in latest and established models = 0.219784 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 15 components and 0.219784 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.087527Jy sigma=2.187307 ! Fit after self-cal, rms=0.081110Jy sigma=2.004117 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0223023 Jy ! Component: 100 - total flux cleaned = 0.0324348 Jy ! Total flux subtracted in 100 components = 0.0324348 Jy ! Clean residual min=-0.007942 max=0.017551 Jy/beam ! Clean residual mean=-0.000009 rms=0.001999 Jy/beam ! Combined flux in latest and established models = 0.252218 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 24 components and 0.252218 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073841Jy sigma=1.818441 ! Fit after self-cal, rms=0.073147Jy sigma=1.792502 ! Inverting map ! Added new window around map position (-6.8, -5.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0179886 Jy ! Component: 100 - total flux cleaned = 0.0297262 Jy ! Total flux subtracted in 100 components = 0.0297262 Jy ! Clean residual min=-0.007308 max=0.014909 Jy/beam ! Clean residual mean=-0.000007 rms=0.001564 Jy/beam ! Combined flux in latest and established models = 0.281945 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 39 components and 0.281945 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065788Jy sigma=1.595774 ! Fit after self-cal, rms=0.065240Jy sigma=1.586297 ! Inverting map ! Added new window around map position (-8, -6.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0138382 Jy ! Component: 100 - total flux cleaned = 0.0211096 Jy ! Total flux subtracted in 100 components = 0.0211096 Jy ! Clean residual min=-0.005846 max=0.007757 Jy/beam ! Clean residual mean=-0.000005 rms=0.001249 Jy/beam ! Combined flux in latest and established models = 0.303054 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 49 components and 0.303054 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060913Jy sigma=1.472304 ! Fit after self-cal, rms=0.060579Jy sigma=1.466464 ! Inverting map ! Added new window around map position (-5.8, -5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00759278 Jy ! Component: 100 - total flux cleaned = 0.0126533 Jy ! Total flux subtracted in 100 components = 0.0126533 Jy ! Clean residual min=-0.004933 max=0.004994 Jy/beam ! Clean residual mean=-0.000004 rms=0.001069 Jy/beam ! Combined flux in latest and established models = 0.315708 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 56 components and 0.315708 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058514Jy sigma=1.410974 ! Fit after self-cal, rms=0.058420Jy sigma=1.409359 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9224 mas, bmaj=1.819 mas, bpa=-14.62 degrees ! Estimated noise=0.180143 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00969387 Jy ! Component: 100 - total flux cleaned = 0.016774 Jy ! Component: 150 - total flux cleaned = 0.0206038 Jy ! Component: 200 - total flux cleaned = 0.0239671 Jy ! Total flux subtracted in 200 components = 0.0239671 Jy ! Clean residual min=-0.004903 max=0.005087 Jy/beam ! Clean residual mean=-0.000004 rms=0.000978 Jy/beam ! Combined flux in latest and established models = 0.339675 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 80 components and 0.339675 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056155Jy sigma=1.347898 ! Fit after self-cal, rms=0.055955Jy sigma=1.343482 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9224 x 1.819 at -14.62 degrees (North through East) ! Clean map min=-0.0045661 max=0.133 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.98 HN 0.98 KP 1.07 ! LA 0.98 MK 0.97 NL 1.13 OV 0.91 ! PT 0.95 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.98 HN 0.97 KP 1.05 ! LA 0.97 MK 0.97 NL 1.16 OV 0.93 ! PT 0.94 SC 0.96 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.99 HN 0.95 KP 1.05 ! LA 0.98 MK 0.95 NL 1.15 OV 0.92 ! PT 0.95 SC 0.98 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.99 HN 0.96 KP 1.07 ! LA 0.99 MK 0.93 NL 1.18 OV 0.91 ! PT 0.93 SC 0.97 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 0.97 HN 0.97 KP 1.07 ! LA 0.99 MK 0.94 NL 1.14 OV 0.93 ! PT 0.93 SC 0.98 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.00 HN 0.96 KP 1.05 ! LA 0.97 MK 0.95 NL 1.16 OV 0.93 ! PT 0.95 SC 1.01 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.99 HN 0.97 KP 1.05 ! LA 0.97 MK 0.95 NL 1.14 OV 0.92 ! PT 0.96 SC 1.00 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.00 HN 0.97 KP 1.06 ! LA 0.96 MK 0.93 NL 1.13 OV 0.94 ! PT 0.95 SC 1.02 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.00 HN 0.98 KP 1.06 ! LA 0.99 MK 0.90 NL 1.14 OV 0.92 ! PT 0.94 SC 0.99 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.98 HN 0.99 KP 1.05 ! LA 0.99 MK 0.94 NL 1.18 OV 0.93 ! PT 0.96 SC 0.98 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 0.98 HN 0.97 KP 1.03 ! LA 1.00 MK 0.96 NL 1.14 OV 0.93 ! PT 0.96 SC 1.01 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.99 HN 1.01 KP 1.06 ! LA 0.99 MK 0.92 NL 1.17 OV 0.92 ! PT 0.96 SC 0.99 ! ! ! Fit before self-cal, rms=0.055955Jy sigma=1.343482 ! Fit after self-cal, rms=0.054516Jy sigma=1.293516 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9055 mas, bmaj=1.829 mas, bpa=-15.01 degrees ! Estimated noise=0.180999 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000331864 Jy ! Component: 100 - total flux cleaned = 0.0014745 Jy ! Component: 150 - total flux cleaned = 0.00262548 Jy ! Component: 200 - total flux cleaned = 0.00366971 Jy ! Total flux subtracted in 200 components = 0.00366971 Jy ! Clean residual min=-0.001902 max=0.002673 Jy/beam ! Clean residual mean=-0.000001 rms=0.000461 Jy/beam ! Combined flux in latest and established models = 0.343344 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 99 components and 0.343344 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053873Jy sigma=1.277723 ! Fit after self-cal, rms=0.053857Jy sigma=1.276345 ! Inverting map ! Added new window around map position (-1.2, -1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00117461 Jy ! Component: 100 - total flux cleaned = 0.00193094 Jy ! Component: 150 - total flux cleaned = 0.0027025 Jy ! Component: 200 - total flux cleaned = 0.00329763 Jy ! Total flux subtracted in 200 components = 0.00329763 Jy ! Clean residual min=-0.001635 max=0.001928 Jy/beam ! Clean residual mean=-0.000000 rms=0.000392 Jy/beam ! Combined flux in latest and established models = 0.346642 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 106 components and 0.346642 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053629Jy sigma=1.270984 ! Fit after self-cal, rms=0.053612Jy sigma=1.270630 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053612Jy sigma=1.270630 ! Fit after self-cal, rms=0.053404Jy sigma=1.266218 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9043 mas, bmaj=1.828 mas, bpa=-15.07 degrees ! Estimated noise=0.180493 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000225838 Jy ! Component: 100 - total flux cleaned = 0.000617111 Jy ! Component: 150 - total flux cleaned = 0.000997665 Jy ! Component: 200 - total flux cleaned = 0.00120639 Jy ! Total flux subtracted in 200 components = 0.00120639 Jy ! Clean residual min=-0.001300 max=0.001689 Jy/beam ! Clean residual mean=-0.000001 rms=0.000306 Jy/beam ! Combined flux in latest and established models = 0.347849 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 121 components and 0.347849 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053309Jy sigma=1.263858 ! Fit after self-cal, rms=0.053304Jy sigma=1.263682 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2, -12). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0010048 Jy ! Component: 100 - total flux cleaned = 0.00128412 Jy ! Component: 150 - total flux cleaned = 0.00142584 Jy ! Component: 200 - total flux cleaned = 0.00152544 Jy ! Total flux subtracted in 200 components = 0.00152544 Jy ! Clean residual min=-0.001191 max=0.001217 Jy/beam ! Clean residual mean=-0.000001 rms=0.000282 Jy/beam ! Combined flux in latest and established models = 0.349374 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 126 components and 0.349374 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053243Jy sigma=1.262145 ! Fit after self-cal, rms=0.053239Jy sigma=1.262089 ! Inverting map ! Added new window around map position (-9.2, -6.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000908906 Jy ! Component: 100 - total flux cleaned = 0.00103741 Jy ! Component: 150 - total flux cleaned = 0.00106648 Jy ! Component: 200 - total flux cleaned = 0.00106723 Jy ! Total flux subtracted in 200 components = 0.00106723 Jy ! Clean residual min=-0.001139 max=0.001046 Jy/beam ! Clean residual mean=-0.000001 rms=0.000267 Jy/beam ! Combined flux in latest and established models = 0.350441 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 139 components and 0.350441 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053200Jy sigma=1.261122 ! Fit after self-cal, rms=0.053197Jy sigma=1.261059 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053197Jy sigma=1.261059 ! Fit after self-cal, rms=0.053098Jy sigma=1.258504 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9049 mas, bmaj=1.826 mas, bpa=-15.08 degrees ! Estimated noise=0.180353 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000420858 Jy ! Component: 100 - total flux cleaned = 0.000644534 Jy ! Component: 150 - total flux cleaned = 0.000794084 Jy ! Component: 200 - total flux cleaned = 0.000816873 Jy ! Total flux subtracted in 200 components = 0.000816873 Jy ! Clean residual min=-0.001076 max=0.000975 Jy/beam ! Clean residual mean=-0.000000 rms=0.000240 Jy/beam ! Combined flux in latest and established models = 0.351258 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 151 components and 0.351258 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053074Jy sigma=1.257883 ! Fit after self-cal, rms=0.053073Jy sigma=1.257839 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000192401 Jy ! Component: 100 - total flux cleaned = 0.000257985 Jy ! Component: 150 - total flux cleaned = 0.0002381 Jy ! Component: 200 - total flux cleaned = 0.000238061 Jy ! Total flux subtracted in 200 components = 0.000238061 Jy ! Clean residual min=-0.001033 max=0.000970 Jy/beam ! Clean residual mean=-0.000000 rms=0.000234 Jy/beam ! Combined flux in latest and established models = 0.351496 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 159 components and 0.351496 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053058Jy sigma=1.257471 ! Fit after self-cal, rms=0.053057Jy sigma=1.257457 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053057Jy sigma=1.257457 ! Fit after self-cal, rms=0.053058Jy sigma=1.257412 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.155 mas, bmaj=2.664 mas, bpa=-10.24 degrees ! Estimated noise=0.226806 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000353671 Jy ! Component: 100 - total flux cleaned = 0.00038718 Jy ! Component: 150 - total flux cleaned = 0.000417139 Jy ! Component: 200 - total flux cleaned = 0.000416904 Jy ! Total flux subtracted in 200 components = 0.000416904 Jy ! Clean residual min=-0.000961 max=0.000979 Jy/beam ! Clean residual mean=0.000000 rms=0.000242 Jy/beam ! Combined flux in latest and established models = 0.351913 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 172 components and 0.351913 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053052Jy sigma=1.257273 ! Fit after self-cal, rms=0.053052Jy sigma=1.257265 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.53972e-05 Jy ! Component: 100 - total flux cleaned = 0.000119014 Jy ! Component: 150 - total flux cleaned = 0.000119417 Jy ! Component: 200 - total flux cleaned = 0.000150302 Jy ! Total flux subtracted in 200 components = 0.000150302 Jy ! Clean residual min=-0.000936 max=0.000966 Jy/beam ! Clean residual mean=0.000000 rms=0.000239 Jy/beam ! Combined flux in latest and established models = 0.352063 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 182 components and 0.352063 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053049Jy sigma=1.257185 ! Fit after self-cal, rms=0.053049Jy sigma=1.257181 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.9053 mas, bmaj=1.826 mas, bpa=-15.04 degrees ! Estimated noise=0.18038 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9053 x 1.826 at -15.04 degrees (North through East) ! Clean map min=-0.00088508 max=0.12953 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7161 mas, bmaj=1.539 mas, bpa=-14.4 degrees ! Estimated noise=0.305085 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.122104 Jy ! Component: 100 - total flux cleaned = 0.177618 Jy ! Component: 150 - total flux cleaned = 0.208085 Jy ! Component: 200 - total flux cleaned = 0.230691 Jy ! Total flux subtracted in 200 components = 0.230691 Jy ! Clean residual min=-0.006277 max=0.013420 Jy/beam ! Clean residual mean=-0.000008 rms=0.001800 Jy/beam ! Combined flux in latest and established models = 0.230691 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.230691 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9053 mas, bmaj=1.826 mas, bpa=-15.04 degrees ! Estimated noise=0.18038 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0259301 Jy ! Component: 100 - total flux cleaned = 0.044971 Jy ! Component: 150 - total flux cleaned = 0.0594454 Jy ! Component: 200 - total flux cleaned = 0.0706429 Jy ! Total flux subtracted in 200 components = 0.0706429 Jy ! Clean residual min=-0.003912 max=0.006612 Jy/beam ! Clean residual mean=-0.000003 rms=0.001061 Jy/beam ! Combined flux in latest and established models = 0.301334 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 40 components and 0.301334 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00885307 Jy ! Component: 100 - total flux cleaned = 0.0159364 Jy ! Component: 150 - total flux cleaned = 0.0216761 Jy ! Component: 200 - total flux cleaned = 0.0263886 Jy ! Total flux subtracted in 200 components = 0.0263886 Jy ! Clean residual min=-0.002495 max=0.002842 Jy/beam ! Clean residual mean=-0.000001 rms=0.000545 Jy/beam ! Combined flux in latest and established models = 0.327722 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 68 components and 0.327722 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00391359 Jy ! Component: 100 - total flux cleaned = 0.00719931 Jy ! Component: 150 - total flux cleaned = 0.00999368 Jy ! Component: 200 - total flux cleaned = 0.0123782 Jy ! Total flux subtracted in 200 components = 0.0123782 Jy ! Clean residual min=-0.001779 max=0.001693 Jy/beam ! Clean residual mean=-0.000001 rms=0.000352 Jy/beam ! Combined flux in latest and established models = 0.3401 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 93 components and 0.3401 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.155 mas, bmaj=2.664 mas, bpa=-10.24 degrees ! Estimated noise=0.226806 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00342159 Jy ! Component: 100 - total flux cleaned = 0.00569998 Jy ! Component: 150 - total flux cleaned = 0.0073863 Jy ! Component: 200 - total flux cleaned = 0.00868348 Jy ! Total flux subtracted in 200 components = 0.00868348 Jy ! Clean residual min=-0.001245 max=0.001247 Jy/beam ! Clean residual mean=-0.000000 rms=0.000291 Jy/beam ! Combined flux in latest and established models = 0.348784 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (21.2, 17.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00120289 Jy ! Component: 100 - total flux cleaned = 0.00208112 Jy ! Component: 150 - total flux cleaned = 0.00266695 Jy ! Component: 200 - total flux cleaned = 0.00306798 Jy ! Total flux subtracted in 200 components = 0.00306798 Jy ! Clean residual min=-0.000978 max=0.000813 Jy/beam ! Clean residual mean=0.000000 rms=0.000241 Jy/beam ! Combined flux in latest and established models = 0.351852 Jy ! Adding 87 model components to the UV plane model. ! The established model now contains 168 components and 0.351852 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9053 mas, bmaj=1.826 mas, bpa=-15.04 degrees ! Estimated noise=0.18038 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000484907 Jy ! Component: 100 - total flux cleaned = 0.000722823 Jy ! Component: 150 - total flux cleaned = 0.000903615 Jy ! Component: 200 - total flux cleaned = 0.000937084 Jy ! Total flux subtracted in 200 components = 0.000937084 Jy ! Clean residual min=-0.001166 max=0.000978 Jy/beam ! Clean residual mean=-0.000000 rms=0.000237 Jy/beam ! Combined flux in latest and established models = 0.352789 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 191 components and 0.352789 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053099Jy sigma=1.258538 ! Fit after self-cal, rms=0.053062Jy sigma=1.257610 wmodel J1911+2658_X_map.mod ! Writing 191 model components to file: J1911+2658_X_map.mod wobs J1911+2658_X_uvs.fits ! Writing UV FITS file: J1911+2658_X_uvs.fits wwins J1911+2658_X_map.win ! wwins: Wrote 9 windows to J1911+2658_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000196924 Jy ! Component: 100 - total flux cleaned = -0.000282901 Jy ! Component: 150 - total flux cleaned = -0.000415475 Jy ! Component: 200 - total flux cleaned = -0.000512104 Jy ! Component: 250 - total flux cleaned = -0.000574936 Jy ! Component: 300 - total flux cleaned = -0.000651323 Jy ! Component: 350 - total flux cleaned = -0.000636368 Jy ! Component: 400 - total flux cleaned = -0.000650935 Jy ! Component: 450 - total flux cleaned = -0.000636538 Jy ! Component: 500 - total flux cleaned = -0.000622481 Jy ! Component: 550 - total flux cleaned = -0.000594801 Jy ! Component: 600 - total flux cleaned = -0.000622595 Jy ! Component: 650 - total flux cleaned = -0.000649804 Jy ! Component: 700 - total flux cleaned = -0.000649849 Jy ! Component: 750 - total flux cleaned = -0.000663067 Jy ! Component: 800 - total flux cleaned = -0.000624196 Jy ! Component: 850 - total flux cleaned = -0.000650136 Jy ! Component: 900 - total flux cleaned = -0.000662798 Jy ! Component: 950 - total flux cleaned = -0.000662595 Jy ! Component: 1000 - total flux cleaned = -0.000662382 Jy ! Component: 1050 - total flux cleaned = -0.000613298 Jy ! Component: 1100 - total flux cleaned = -0.000589072 Jy ! Component: 1150 - total flux cleaned = -0.000577099 Jy ! Component: 1200 - total flux cleaned = -0.000577006 Jy ! Component: 1250 - total flux cleaned = -0.000529665 Jy ! Component: 1300 - total flux cleaned = -0.000541441 Jy ! Component: 1350 - total flux cleaned = -0.000529733 Jy ! Component: 1400 - total flux cleaned = -0.000495152 Jy ! Component: 1450 - total flux cleaned = -0.000461107 Jy ! Component: 1500 - total flux cleaned = -0.000483599 Jy ! Component: 1550 - total flux cleaned = -0.000449977 Jy ! Component: 1600 - total flux cleaned = -0.000405594 Jy ! Component: 1650 - total flux cleaned = -0.000427662 Jy ! Component: 1700 - total flux cleaned = -0.000394962 Jy ! Component: 1750 - total flux cleaned = -0.000405797 Jy ! Component: 1800 - total flux cleaned = -0.000384275 Jy ! Component: 1850 - total flux cleaned = -0.000352284 Jy ! Component: 1900 - total flux cleaned = -0.000341705 Jy ! Component: 1950 - total flux cleaned = -0.000299735 Jy ! Component: 2000 - total flux cleaned = -0.000278874 Jy ! Component: 2050 - total flux cleaned = -0.000237601 Jy ! Component: 2100 - total flux cleaned = -0.000196558 Jy ! Component: 2150 - total flux cleaned = -0.000155866 Jy ! Component: 2200 - total flux cleaned = -0.000145695 Jy ! Component: 2250 - total flux cleaned = -9.5561e-05 Jy ! Component: 2300 - total flux cleaned = -9.55041e-05 Jy ! Component: 2350 - total flux cleaned = -4.60108e-05 Jy ! Component: 2400 - total flux cleaned = 3.14197e-06 Jy ! Component: 2450 - total flux cleaned = 3.10037e-06 Jy ! Component: 2500 - total flux cleaned = 3.07922e-06 Jy ! Component: 2550 - total flux cleaned = 6.08889e-05 Jy ! Component: 2600 - total flux cleaned = 7.04684e-05 Jy ! Component: 2650 - total flux cleaned = 0.000118028 Jy ! Component: 2700 - total flux cleaned = 0.000203055 Jy ! Component: 2750 - total flux cleaned = 0.000184286 Jy ! Component: 2800 - total flux cleaned = 0.000230877 Jy ! Component: 2850 - total flux cleaned = 0.000267909 Jy ! Component: 2900 - total flux cleaned = 0.000268007 Jy ! Component: 2950 - total flux cleaned = 0.000322896 Jy ! Component: 3000 - total flux cleaned = 0.000322926 Jy ! Component: 3050 - total flux cleaned = 0.000350118 Jy ! Component: 3100 - total flux cleaned = 0.000377088 Jy ! Component: 3150 - total flux cleaned = 0.000430603 Jy ! Component: 3200 - total flux cleaned = 0.0004218 Jy ! Component: 3250 - total flux cleaned = 0.000448269 Jy ! Component: 3300 - total flux cleaned = 0.000483335 Jy ! Component: 3350 - total flux cleaned = 0.000500852 Jy ! Component: 3400 - total flux cleaned = 0.000518115 Jy ! Component: 3450 - total flux cleaned = 0.000526655 Jy ! Component: 3500 - total flux cleaned = 0.000560908 Jy ! Component: 3550 - total flux cleaned = 0.000603352 Jy ! Component: 3600 - total flux cleaned = 0.000603321 Jy ! Component: 3650 - total flux cleaned = 0.000620148 Jy ! Component: 3700 - total flux cleaned = 0.00064523 Jy ! Component: 3750 - total flux cleaned = 0.00068676 Jy ! Component: 3800 - total flux cleaned = 0.000686711 Jy ! Component: 3850 - total flux cleaned = 0.000744339 Jy ! Component: 3900 - total flux cleaned = 0.00080154 Jy ! Component: 3950 - total flux cleaned = 0.000793385 Jy ! Component: 4000 - total flux cleaned = 0.000809561 Jy ! Component: 4050 - total flux cleaned = 0.000817629 Jy ! Total flux subtracted in 4096 components = 0.000857618 Jy ! Clean residual min=-0.000430 max=0.000482 Jy/beam ! Clean residual mean=-0.000000 rms=0.000137 Jy/beam ! Combined flux in latest and established models = 0.353647 Jy keep ! Adding 291 model components to the UV plane model. ! The established model now contains 480 components and 0.353647 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J1911+2658_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9053 x 1.826 at -15.04 degrees (North through East) ! Clean map min=-0.00088393 max=0.12945 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J1911+2658_X_map.fits wmodel /vlbi/uf001/uva//J1911+2658_X_map.mod ! Writing 480 model components to file: /vlbi/uf001/uva//J1911+2658_X_map.mod wobs /vlbi/uf001/uva//J1911+2658_X_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J1911+2658_X_uvs.fits wwins /vlbi/uf001/uva//J1911+2658_X_map.win ! wwins: Wrote 10 windows to /vlbi/uf001/uva//J1911+2658_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.129453 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000136861 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.317168 0.317168 0.634336 1.26867 2.53734 5.07469 10.1494 20.2988 40.5975 81.195 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.129 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 945.87 quit ! Quitting program ! Log file /vlbi/uf001/uva//J1911+2658_X_dfm.log closed on Mon Jan 14 04:57:34 2019