! Started logfile: /vlbi/uf001/uvm//J1859-0121_X_a_dfm.log on Sun Jan 13 22:18:49 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uvm//J1859-0121_X_a_uvm.fits ! Reading UV FITS file: /vlbi/uf001/uvm//J1859-0121_X_a_uvm.fits ! AN table 1: 72 integrations on 36 of 36 possible baselines. ! AN table 2: 58 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.868596 visibilities/baseline/integration-bin. ! Found source: J1859-0121 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 43944 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1859-0121_X_a] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 72 telescope corrections were flagged in sub-array 1. ! A total of 16 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 72 telescope corrections were flagged in sub-array 1. ! A total of 16 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 72 telescope corrections were flagged in sub-array 1. ! A total of 16 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 72 telescope corrections were flagged in sub-array 1. ! A total of 16 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 5. ! A total of 72 telescope corrections were flagged in sub-array 1. ! A total of 16 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 6. ! A total of 72 telescope corrections were flagged in sub-array 1. ! A total of 16 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 7. ! A total of 72 telescope corrections were flagged in sub-array 1. ! A total of 16 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 8. ! A total of 72 telescope corrections were flagged in sub-array 1. ! A total of 16 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 9. ! A total of 72 telescope corrections were flagged in sub-array 1. ! A total of 16 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 10. ! A total of 72 telescope corrections were flagged in sub-array 1. ! A total of 16 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 11. ! A total of 72 telescope corrections were flagged in sub-array 1. ! A total of 16 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 12. ! A total of 72 telescope corrections were flagged in sub-array 1. ! A total of 16 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.001263Jy sigma=22.769233 ! Fit after self-cal, rms=0.966944Jy sigma=21.978397 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7013 mas, bmaj=1.666 mas, bpa=-4.203 degrees ! Estimated noise=0.286848 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0241794 Jy ! Component: 100 - total flux cleaned = 0.030089 Jy ! Total flux subtracted in 100 components = 0.030089 Jy ! Clean residual min=-0.002103 max=0.003414 Jy/beam ! Clean residual mean=0.000004 rms=0.000539 Jy/beam ! Combined flux in latest and established models = 0.030089 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.030089 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059057Jy sigma=1.246754 ! Fit after self-cal, rms=0.057702Jy sigma=1.215273 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00463569 Jy ! Component: 100 - total flux cleaned = 0.00716051 Jy ! Total flux subtracted in 100 components = 0.00716051 Jy ! Clean residual min=-0.001867 max=0.003283 Jy/beam ! Clean residual mean=0.000003 rms=0.000486 Jy/beam ! Combined flux in latest and established models = 0.0372495 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 15 components and 0.0372495 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056955Jy sigma=1.196188 ! Fit after self-cal, rms=0.056972Jy sigma=1.195823 ! Inverting map ! Added new window around map position (-1.4, -0.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00319971 Jy ! Component: 100 - total flux cleaned = 0.00514127 Jy ! Total flux subtracted in 100 components = 0.00514127 Jy ! Clean residual min=-0.001805 max=0.003145 Jy/beam ! Clean residual mean=0.000003 rms=0.000449 Jy/beam ! Combined flux in latest and established models = 0.0423907 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 35 components and 0.0423907 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056613Jy sigma=1.185927 ! Fit after self-cal, rms=0.056542Jy sigma=1.184225 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9153 mas, bmaj=2.097 mas, bpa=-6.528 degrees ! Estimated noise=0.152193 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1.4, 0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00543173 Jy ! Component: 100 - total flux cleaned = 0.00914122 Jy ! Component: 150 - total flux cleaned = 0.0119741 Jy ! Component: 200 - total flux cleaned = 0.0142157 Jy ! Total flux subtracted in 200 components = 0.0142157 Jy ! Clean residual min=-0.001397 max=0.001917 Jy/beam ! Clean residual mean=0.000003 rms=0.000379 Jy/beam ! Combined flux in latest and established models = 0.0566064 Jy ! Performing phase self-cal ! Adding 53 model components to the UV plane model. ! The established model now contains 77 components and 0.0566064 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055913Jy sigma=1.166986 ! Fit after self-cal, rms=0.055845Jy sigma=1.164975 ! Inverting map ! Added new window around map position (0, 2.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00257156 Jy ! Component: 100 - total flux cleaned = 0.00446958 Jy ! Component: 150 - total flux cleaned = 0.00597409 Jy ! Component: 200 - total flux cleaned = 0.00719573 Jy ! Total flux subtracted in 200 components = 0.00719573 Jy ! Clean residual min=-0.001268 max=0.001295 Jy/beam ! Clean residual mean=0.000002 rms=0.000272 Jy/beam ! Combined flux in latest and established models = 0.0638022 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 93 components and 0.0638022 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055684Jy sigma=1.160741 ! Fit after self-cal, rms=0.055665Jy sigma=1.160269 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9153 x 2.097 at -6.528 degrees (North through East) ! Clean map min=-0.0011974 max=0.034412 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 HN 1.10 KP 1.00 LA 1.01 ! MK 1.13 NL 1.16 OV 0.98 PT 1.00 ! SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 0.94 HN 1.04 KP 0.93 ! LA 1.01 MK 1.06 NL 1.15 PT 0.89 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.22 HN 0.96 KP 1.01 LA 0.99 ! MK 1.17 NL 1.15 OV 0.94 PT 0.96 ! SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.09 FD 0.99 HN 0.99 KP 0.99 ! LA 0.92 MK 1.09 NL 1.10 PT 0.92 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.17 HN 0.96 KP 1.02 LA 0.97 ! MK 1.14 NL 1.18 OV 1.01 PT 0.99 ! SC 1.06 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.06 FD 1.06 HN 1.03 KP 0.91 ! LA 1.00 MK 0.93 NL 1.10 PT 0.87 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 HN 0.90 KP 1.05 LA 1.04 ! MK 1.20 NL 1.10 OV 0.93 PT 0.92 ! SC 1.08 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.04 FD 0.98 HN 1.06 KP 0.99 ! LA 0.93 MK 1.00 NL 1.07 PT 0.97 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 HN 0.99 KP 1.09 LA 1.03 ! MK 1.06 NL 1.11 OV 0.92 PT 0.94 ! SC 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 1.01 HN 1.03 KP 0.97 ! LA 0.94 MK 1.01 NL 1.08 PT 0.92 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 HN 0.93 KP 1.14 LA 1.02 ! MK 1.13 NL 1.12 OV 0.85 PT 1.01 ! SC 0.95 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.05 FD 0.99 HN 0.98 KP 1.03 ! LA 0.88 MK 1.08 NL 1.04 PT 0.93 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 HN 0.77 KP 1.07 LA 0.99 ! MK 1.01 NL 1.29 OV 0.88 PT 0.98 ! SC 1.03 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 0.93 HN 0.88 KP 1.06 ! LA 0.90 MK 0.99 NL 1.07 PT 0.94 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 HN 0.82 KP 1.04 LA 1.06 ! MK 1.07 NL 1.16 OV 0.90 PT 0.94 ! SC 0.90 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 0.95 HN 0.89 KP 1.02 ! LA 0.90 MK 1.04 NL 1.03 PT 0.99 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 HN 0.76 KP 1.04 LA 0.98 ! MK 1.00 NL 1.18 OV 0.86 PT 1.14 ! SC 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.06 HN 0.78 KP 0.98 ! LA 0.91 MK 1.10 NL 0.97 PT 0.95 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 HN 0.96 KP 0.99 LA 1.01 ! MK 0.93 NL 1.04 OV 0.94 PT 1.03 ! SC 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.96 FD 0.99 HN 0.84 KP 0.97 ! LA 1.00 MK 0.95 NL 1.04 PT 0.92 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 HN 0.85 KP 1.07 LA 1.02 ! MK 0.86 NL 1.23 OV 0.90 PT 0.88 ! SC 0.95 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.94 FD 1.00 HN 0.82 KP 1.07 ! LA 0.95 MK 0.87 NL 1.03 PT 0.87 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 HN 0.78 KP 0.96 LA 0.97 ! MK 0.90 NL 1.03 OV 0.92 PT 0.89 ! SC 0.91 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.89 FD 0.93 HN 0.86 KP 0.99 ! LA 0.97 MK 0.70 NL 1.01 PT 0.96 ! ! ! Fit before self-cal, rms=0.055665Jy sigma=1.160269 ! Fit after self-cal, rms=0.054113Jy sigma=1.155420 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9132 mas, bmaj=2.117 mas, bpa=-6.519 degrees ! Estimated noise=0.150966 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00069779 Jy ! Component: 100 - total flux cleaned = 0.000751987 Jy ! Component: 150 - total flux cleaned = 0.000645895 Jy ! Component: 200 - total flux cleaned = 0.000533954 Jy ! Total flux subtracted in 200 components = 0.000533954 Jy ! Clean residual min=-0.000839 max=0.000745 Jy/beam ! Clean residual mean=-0.000001 rms=0.000186 Jy/beam ! Combined flux in latest and established models = 0.0643361 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 111 components and 0.0643361 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054088Jy sigma=1.154999 ! Fit after self-cal, rms=0.054149Jy sigma=1.154142 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054149Jy sigma=1.154142 ! Fit after self-cal, rms=0.054050Jy sigma=1.152358 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9121 mas, bmaj=2.109 mas, bpa=-6.572 degrees ! Estimated noise=0.15089 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000216782 Jy ! Component: 100 - total flux cleaned = 0.000200715 Jy ! Component: 150 - total flux cleaned = 0.000167175 Jy ! Component: 200 - total flux cleaned = 0.000122368 Jy ! Total flux subtracted in 200 components = 0.000122368 Jy ! Clean residual min=-0.000694 max=0.000775 Jy/beam ! Clean residual mean=-0.000001 rms=0.000172 Jy/beam ! Combined flux in latest and established models = 0.0644585 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 126 components and 0.0644585 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054035Jy sigma=1.152111 ! Fit after self-cal, rms=0.054066Jy sigma=1.151544 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (9.8, -15.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000376681 Jy ! Component: 100 - total flux cleaned = 0.000355695 Jy ! Component: 150 - total flux cleaned = 0.000303718 Jy ! Component: 200 - total flux cleaned = 0.000225296 Jy ! Total flux subtracted in 200 components = 0.000225296 Jy ! Clean residual min=-0.000652 max=0.000731 Jy/beam ! Clean residual mean=-0.000001 rms=0.000169 Jy/beam ! Combined flux in latest and established models = 0.0646838 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 138 components and 0.0646838 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054049Jy sigma=1.151249 ! Fit after self-cal, rms=0.054047Jy sigma=1.151182 ! Inverting map ! Added new window around map position (8.6, -25.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000657084 Jy ! Component: 100 - total flux cleaned = 0.00093065 Jy ! Component: 150 - total flux cleaned = 0.00104972 Jy ! Component: 200 - total flux cleaned = 0.00104999 Jy ! Total flux subtracted in 200 components = 0.00104999 Jy ! Clean residual min=-0.000672 max=0.000690 Jy/beam ! Clean residual mean=-0.000001 rms=0.000164 Jy/beam ! Combined flux in latest and established models = 0.0657338 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 149 components and 0.0657338 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054031Jy sigma=1.150904 ! Fit after self-cal, rms=0.054027Jy sigma=1.150820 ! Inverting map ! Added new window around map position (32, 41.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000423388 Jy ! Component: 100 - total flux cleaned = 0.000656994 Jy ! Component: 150 - total flux cleaned = 0.000743314 Jy ! Component: 200 - total flux cleaned = 0.000774631 Jy ! Total flux subtracted in 200 components = 0.000774631 Jy ! Clean residual min=-0.000669 max=0.000641 Jy/beam ! Clean residual mean=-0.000001 rms=0.000162 Jy/beam ! Combined flux in latest and established models = 0.0665084 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 157 components and 0.0665084 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054011Jy sigma=1.150542 ! Fit after self-cal, rms=0.054005Jy sigma=1.150469 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.054005Jy sigma=1.150469 ! Fit after self-cal, rms=0.053832Jy sigma=1.149554 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9081 mas, bmaj=2.105 mas, bpa=-6.768 degrees ! Estimated noise=0.149871 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000456604 Jy ! Component: 100 - total flux cleaned = 0.000515292 Jy ! Component: 150 - total flux cleaned = 0.000533572 Jy ! Component: 200 - total flux cleaned = 0.000518972 Jy ! Total flux subtracted in 200 components = 0.000518972 Jy ! Clean residual min=-0.000680 max=0.000593 Jy/beam ! Clean residual mean=-0.000001 rms=0.000154 Jy/beam ! Combined flux in latest and established models = 0.0670274 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 169 components and 0.0670274 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053818Jy sigma=1.149312 ! Fit after self-cal, rms=0.053844Jy sigma=1.149078 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000197375 Jy ! Component: 100 - total flux cleaned = 0.000131147 Jy ! Component: 150 - total flux cleaned = 0.000101923 Jy ! Component: 200 - total flux cleaned = 7.48546e-05 Jy ! Total flux subtracted in 200 components = 7.48546e-05 Jy ! Clean residual min=-0.000698 max=0.000624 Jy/beam ! Clean residual mean=-0.000001 rms=0.000155 Jy/beam ! Combined flux in latest and established models = 0.0671022 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 176 components and 0.0671022 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053834Jy sigma=1.148906 ! Fit after self-cal, rms=0.053833Jy sigma=1.148865 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053833Jy sigma=1.148865 ! Fit after self-cal, rms=0.053746Jy sigma=1.148771 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.089 mas, bmaj=3.482 mas, bpa=-9.242 degrees ! Estimated noise=0.186799 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000135401 Jy ! Component: 100 - total flux cleaned = 3.92671e-05 Jy ! Component: 150 - total flux cleaned = -8.29186e-05 Jy ! Component: 200 - total flux cleaned = -0.000137115 Jy ! Total flux subtracted in 200 components = -0.000137115 Jy ! Clean residual min=-0.000669 max=0.000654 Jy/beam ! Clean residual mean=-0.000001 rms=0.000170 Jy/beam ! Combined flux in latest and established models = 0.0669651 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 199 components and 0.0669651 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053743Jy sigma=1.148712 ! Fit after self-cal, rms=0.053754Jy sigma=1.148647 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.73942e-05 Jy ! Component: 100 - total flux cleaned = -0.000130858 Jy ! Component: 150 - total flux cleaned = -0.000199145 Jy ! Component: 200 - total flux cleaned = -0.000230674 Jy ! Total flux subtracted in 200 components = -0.000230674 Jy ! Clean residual min=-0.000651 max=0.000649 Jy/beam ! Clean residual mean=-0.000001 rms=0.000169 Jy/beam ! Combined flux in latest and established models = 0.0667344 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 214 components and 0.0667344 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053752Jy sigma=1.148605 ! Fit after self-cal, rms=0.053750Jy sigma=1.148563 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.9052 mas, bmaj=2.104 mas, bpa=-6.895 degrees ! Estimated noise=0.149312 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9052 x 2.104 at -6.895 degrees (North through East) ! Clean map min=-0.00094424 max=0.033236 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.698 mas, bmaj=1.669 mas, bpa=-4.519 degrees ! Estimated noise=0.278917 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0244121 Jy ! Component: 100 - total flux cleaned = 0.0321928 Jy ! Component: 150 - total flux cleaned = 0.0375074 Jy ! Component: 200 - total flux cleaned = 0.0415245 Jy ! Total flux subtracted in 200 components = 0.0415245 Jy ! Clean residual min=-0.002117 max=0.002375 Jy/beam ! Clean residual mean=0.000003 rms=0.000460 Jy/beam ! Combined flux in latest and established models = 0.0415245 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.0415245 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9052 mas, bmaj=2.104 mas, bpa=-6.895 degrees ! Estimated noise=0.149312 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00615079 Jy ! Component: 100 - total flux cleaned = 0.0103456 Jy ! Component: 150 - total flux cleaned = 0.0134775 Jy ! Component: 200 - total flux cleaned = 0.0158929 Jy ! Total flux subtracted in 200 components = 0.0158929 Jy ! Clean residual min=-0.001102 max=0.001563 Jy/beam ! Clean residual mean=0.000002 rms=0.000319 Jy/beam ! Combined flux in latest and established models = 0.0574173 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 59 components and 0.0574173 Jy ! Inverting map ! Added new window around map position (-1.6, 1.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00191821 Jy ! Component: 100 - total flux cleaned = 0.00348605 Jy ! Component: 150 - total flux cleaned = 0.00476404 Jy ! Component: 200 - total flux cleaned = 0.00558967 Jy ! Total flux subtracted in 200 components = 0.00558967 Jy ! Clean residual min=-0.000920 max=0.000998 Jy/beam ! Clean residual mean=0.000001 rms=0.000218 Jy/beam ! Combined flux in latest and established models = 0.063007 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 87 components and 0.063007 Jy ! Inverting map ! Added new window around map position (28.4, -45.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000756345 Jy ! Component: 100 - total flux cleaned = 0.00119317 Jy ! Component: 150 - total flux cleaned = 0.00155525 Jy ! Component: 200 - total flux cleaned = 0.00176544 Jy ! Total flux subtracted in 200 components = 0.00176544 Jy ! Clean residual min=-0.000856 max=0.000676 Jy/beam ! Clean residual mean=0.000000 rms=0.000185 Jy/beam ! Combined flux in latest and established models = 0.0647724 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 103 components and 0.0647724 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.089 mas, bmaj=3.482 mas, bpa=-9.242 degrees ! Estimated noise=0.186799 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00071651 Jy ! Component: 100 - total flux cleaned = 0.0010497 Jy ! Component: 150 - total flux cleaned = 0.0011689 Jy ! Component: 200 - total flux cleaned = 0.00118536 Jy ! Total flux subtracted in 200 components = 0.00118536 Jy ! Clean residual min=-0.000724 max=0.000633 Jy/beam ! Clean residual mean=-0.000000 rms=0.000183 Jy/beam ! Combined flux in latest and established models = 0.0659578 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.73463e-05 Jy ! Component: 100 - total flux cleaned = 9.1058e-05 Jy ! Component: 150 - total flux cleaned = 0.000144032 Jy ! Component: 200 - total flux cleaned = 0.000156259 Jy ! Total flux subtracted in 200 components = 0.000156259 Jy ! Clean residual min=-0.000689 max=0.000615 Jy/beam ! Clean residual mean=-0.000001 rms=0.000175 Jy/beam ! Combined flux in latest and established models = 0.0661141 Jy ! Adding 62 model components to the UV plane model. ! The established model now contains 157 components and 0.066114 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9052 mas, bmaj=2.104 mas, bpa=-6.895 degrees ! Estimated noise=0.149312 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000228282 Jy ! Component: 100 - total flux cleaned = 0.000249619 Jy ! Component: 150 - total flux cleaned = 0.000250154 Jy ! Component: 200 - total flux cleaned = 0.000213909 Jy ! Total flux subtracted in 200 components = 0.000213909 Jy ! Clean residual min=-0.000754 max=0.000657 Jy/beam ! Clean residual mean=-0.000000 rms=0.000156 Jy/beam ! Combined flux in latest and established models = 0.0663279 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 174 components and 0.0663279 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053757Jy sigma=1.148761 ! Fit after self-cal, rms=0.053743Jy sigma=1.148516 wmodel J1859-0121_X_a_map.mod ! Writing 174 model components to file: J1859-0121_X_a_map.mod wobs J1859-0121_X_a_uvs.fits ! Writing UV FITS file: J1859-0121_X_a_uvs.fits wwins J1859-0121_X_a_map.win ! wwins: Wrote 9 windows to J1859-0121_X_a_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000201008 Jy ! Component: 100 - total flux cleaned = -0.000224517 Jy ! Component: 150 - total flux cleaned = -0.00020315 Jy ! Component: 200 - total flux cleaned = -0.000254281 Jy ! Component: 250 - total flux cleaned = -0.00024427 Jy ! Component: 300 - total flux cleaned = -0.000234598 Jy ! Component: 350 - total flux cleaned = -0.000253912 Jy ! Component: 400 - total flux cleaned = -0.000272725 Jy ! Component: 450 - total flux cleaned = -0.000318693 Jy ! Component: 500 - total flux cleaned = -0.000345822 Jy ! Component: 550 - total flux cleaned = -0.000345883 Jy ! Component: 600 - total flux cleaned = -0.000354749 Jy ! Component: 650 - total flux cleaned = -0.000372166 Jy ! Component: 700 - total flux cleaned = -0.000354978 Jy ! Component: 750 - total flux cleaned = -0.000380478 Jy ! Component: 800 - total flux cleaned = -0.000405564 Jy ! Component: 850 - total flux cleaned = -0.000397234 Jy ! Component: 900 - total flux cleaned = -0.000372606 Jy ! Component: 950 - total flux cleaned = -0.000413211 Jy ! Component: 1000 - total flux cleaned = -0.000421322 Jy ! Component: 1050 - total flux cleaned = -0.000405379 Jy ! Component: 1100 - total flux cleaned = -0.00042115 Jy ! Component: 1150 - total flux cleaned = -0.00040541 Jy ! Component: 1200 - total flux cleaned = -0.000413232 Jy ! Component: 1250 - total flux cleaned = -0.000397869 Jy ! Component: 1300 - total flux cleaned = -0.000405508 Jy ! Component: 1350 - total flux cleaned = -0.000390338 Jy ! Component: 1400 - total flux cleaned = -0.000405254 Jy ! Component: 1450 - total flux cleaned = -0.000390463 Jy ! Component: 1500 - total flux cleaned = -0.000383222 Jy ! Component: 1550 - total flux cleaned = -0.000390562 Jy ! Component: 1600 - total flux cleaned = -0.000376087 Jy ! Component: 1650 - total flux cleaned = -0.000376137 Jy ! Component: 1700 - total flux cleaned = -0.000390543 Jy ! Component: 1750 - total flux cleaned = -0.000397711 Jy ! Component: 1800 - total flux cleaned = -0.000404769 Jy ! Component: 1850 - total flux cleaned = -0.000397682 Jy ! Component: 1900 - total flux cleaned = -0.000404556 Jy ! Component: 1950 - total flux cleaned = -0.000369988 Jy ! Component: 2000 - total flux cleaned = -0.000376879 Jy ! Component: 2050 - total flux cleaned = -0.000363268 Jy ! Component: 2100 - total flux cleaned = -0.000363288 Jy ! Component: 2150 - total flux cleaned = -0.00034981 Jy ! Component: 2200 - total flux cleaned = -0.000343072 Jy ! Component: 2250 - total flux cleaned = -0.000349724 Jy ! Component: 2300 - total flux cleaned = -0.000323309 Jy ! Component: 2350 - total flux cleaned = -0.000329871 Jy ! Component: 2400 - total flux cleaned = -0.000329846 Jy ! Component: 2450 - total flux cleaned = -0.000310355 Jy ! Component: 2500 - total flux cleaned = -0.000316853 Jy ! Component: 2550 - total flux cleaned = -0.000284755 Jy ! Component: 2600 - total flux cleaned = -0.00027839 Jy ! Component: 2650 - total flux cleaned = -0.000284737 Jy ! Component: 2700 - total flux cleaned = -0.000284656 Jy ! Component: 2750 - total flux cleaned = -0.000297165 Jy ! Component: 2800 - total flux cleaned = -0.000265947 Jy ! Component: 2850 - total flux cleaned = -0.000253481 Jy ! Component: 2900 - total flux cleaned = -0.000265787 Jy ! Component: 2950 - total flux cleaned = -0.00027197 Jy ! Component: 3000 - total flux cleaned = -0.000265826 Jy ! Component: 3050 - total flux cleaned = -0.000247567 Jy ! Component: 3100 - total flux cleaned = -0.000247581 Jy ! Component: 3150 - total flux cleaned = -0.000241597 Jy ! Component: 3200 - total flux cleaned = -0.000247614 Jy ! Component: 3250 - total flux cleaned = -0.000235623 Jy ! Component: 3300 - total flux cleaned = -0.000223782 Jy ! Component: 3350 - total flux cleaned = -0.000223833 Jy ! Component: 3400 - total flux cleaned = -0.000217894 Jy ! Component: 3450 - total flux cleaned = -0.000241395 Jy ! Component: 3500 - total flux cleaned = -0.000258935 Jy ! Component: 3550 - total flux cleaned = -0.00028215 Jy ! Component: 3600 - total flux cleaned = -0.000258986 Jy ! Component: 3650 - total flux cleaned = -0.000253191 Jy ! Component: 3700 - total flux cleaned = -0.000247432 Jy ! Component: 3750 - total flux cleaned = -0.000270282 Jy ! Component: 3800 - total flux cleaned = -0.000247567 Jy ! Component: 3850 - total flux cleaned = -0.000270238 Jy ! Component: 3900 - total flux cleaned = -0.000281516 Jy ! Component: 3950 - total flux cleaned = -0.000298358 Jy ! Component: 4000 - total flux cleaned = -0.00030391 Jy ! Component: 4050 - total flux cleaned = -0.000303862 Jy ! Total flux subtracted in 4096 components = -0.000309386 Jy ! Clean residual min=-0.000357 max=0.000331 Jy/beam ! Clean residual mean=-0.000000 rms=0.000097 Jy/beam ! Combined flux in latest and established models = 0.0660186 Jy keep ! Adding 290 model components to the UV plane model. ! The established model now contains 464 components and 0.0660186 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uvm//J1859-0121_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9052 x 2.104 at -6.895 degrees (North through East) ! Clean map min=-0.00086116 max=0.032834 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uvm//J1859-0121_X_a_map.fits wmodel /vlbi/uf001/uvm//J1859-0121_X_a_map.mod ! Writing 464 model components to file: /vlbi/uf001/uvm//J1859-0121_X_a_map.mod wobs /vlbi/uf001/uvm//J1859-0121_X_a_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uvm//J1859-0121_X_a_uvs.fits wwins /vlbi/uf001/uvm//J1859-0121_X_a_map.win ! wwins: Wrote 10 windows to /vlbi/uf001/uvm//J1859-0121_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0328345 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 9.6731e-05 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.883806 0.883806 1.76761 3.53522 7.07044 14.1409 28.2818 56.5636 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0002 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.032 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 339.441 quit ! Quitting program ! Log file /vlbi/uf001/uvm//J1859-0121_X_a_dfm.log closed on Sun Jan 13 22:18:56 2019