! Started logfile: /vlbi/uf001/uva//J1857-2058_S_dfm.log on Mon Jan 14 04:52:52 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J1857-2058_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J1857-2058_S_uva.fits
! AN table 1: 98 integrations on 28 of 28 possible baselines.
! Apparent sampling: 0.873907 visibilities/baseline/integration-bin.
! Found source: J1857-2058
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 7194 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1857-2058_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 64 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 64 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 64 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.007588Jy  sigma=18.088718
! Fit after  self-cal, rms=0.925618Jy  sigma=16.703367
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.563 mas, bmaj=16.09 mas, bpa=-17.38 degrees
! Estimated noise=0.845467 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0543338 Jy
! Component: 100  -  total flux cleaned = 0.0765695 Jy
! Total flux subtracted in 100 components = 0.0765695 Jy
! Clean residual min=-0.007825 max=0.011364 Jy/beam
! Clean residual mean=0.000019 rms=0.002517 Jy/beam
! Combined flux in latest and established models = 0.0765694 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 23 components and 0.0765694 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.089748Jy  sigma=1.342715
! Fit after  self-cal, rms=0.088694Jy  sigma=1.326316
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.027 mas, bmaj=16.72 mas, bpa=-16.52 degrees
! Estimated noise=0.483913 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.01954 Jy
! Component: 100  -  total flux cleaned = 0.030823 Jy
! Component: 150  -  total flux cleaned = 0.0378879 Jy
! Component: 200  -  total flux cleaned = 0.0425423 Jy
! Total flux subtracted in 200 components = 0.0425423 Jy
! Clean residual min=-0.003611 max=0.004996 Jy/beam
! Clean residual mean=-0.000002 rms=0.001104 Jy/beam
! Combined flux in latest and established models = 0.119112 Jy
! Performing phase self-cal
! Adding 44 model components to the UV plane model.
! The established model now contains 62 components and 0.119112 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.083762Jy  sigma=1.231933
! Fit after  self-cal, rms=0.083340Jy  sigma=1.225107
! Inverting map 
! Added new window around map position (-6, -3).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00586588 Jy
! Component: 100  -  total flux cleaned = 0.00791295 Jy
! Component: 150  -  total flux cleaned = 0.00837436 Jy
! Component: 200  -  total flux cleaned = 0.00853266 Jy
! Total flux subtracted in 200 components = 0.00853266 Jy
! Clean residual min=-0.003282 max=0.003281 Jy/beam
! Clean residual mean=-0.000005 rms=0.000852 Jy/beam
! Combined flux in latest and established models = 0.127644 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 84 components and 0.127644 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.082762Jy  sigma=1.217042
! Fit after  self-cal, rms=0.082645Jy  sigma=1.215750
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.027 x 16.72 at -16.52 degrees (North through East)
! Clean map  min=-0.0032394  max=0.070528 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.72     FD        0.99     HN        1.08     KP        0.93     
!   LA        0.96     MK        1.00     NL        1.05     OV        1.05     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.81     FD        1.10     HN        1.06     KP        1.01     
!   LA        0.98     MK        1.02     NL        0.91     OV        1.01     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        1.06     HN        1.08     KP        0.93     
!   LA        1.02     MK        1.04     NL        1.00     OV        1.03     
! 
! 
! Fit before self-cal, rms=0.082645Jy  sigma=1.215750
! Fit after  self-cal, rms=0.078577Jy  sigma=1.207846
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.07 mas, bmaj=16.57 mas, bpa=-16.66 degrees
! Estimated noise=0.48546 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00121615 Jy
! Component: 100  -  total flux cleaned = 0.00137479 Jy
! Component: 150  -  total flux cleaned = 0.00137247 Jy
! Component: 200  -  total flux cleaned = 0.00137016 Jy
! Total flux subtracted in 200 components = 0.00137016 Jy
! Clean residual min=-0.002742 max=0.002432 Jy/beam
! Clean residual mean=-0.000005 rms=0.000575 Jy/beam
! Combined flux in latest and established models = 0.129015 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 107 components and 0.129015 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.078508Jy  sigma=1.206864
! Fit after  self-cal, rms=0.078436Jy  sigma=1.206286
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.078436Jy  sigma=1.206286
! Fit after  self-cal, rms=0.078042Jy  sigma=1.205091
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.066 mas, bmaj=16.58 mas, bpa=-16.65 degrees
! Estimated noise=0.483048 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00064622 Jy
! Component: 100  -  total flux cleaned = 0.000713786 Jy
! Component: 150  -  total flux cleaned = 0.00090366 Jy
! Component: 200  -  total flux cleaned = 0.00110499 Jy
! Total flux subtracted in 200 components = 0.00110499 Jy
! Clean residual min=-0.002323 max=0.002264 Jy/beam
! Clean residual mean=-0.000003 rms=0.000537 Jy/beam
! Combined flux in latest and established models = 0.13012 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 121 components and 0.13012 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.078006Jy  sigma=1.204560
! Fit after  self-cal, rms=0.078000Jy  sigma=1.204453
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000222791 Jy
! Component: 100  -  total flux cleaned = 0.000365941 Jy
! Component: 150  -  total flux cleaned = 0.00047203 Jy
! Component: 200  -  total flux cleaned = 0.00056974 Jy
! Total flux subtracted in 200 components = 0.00056974 Jy
! Clean residual min=-0.002286 max=0.002278 Jy/beam
! Clean residual mean=-0.000003 rms=0.000530 Jy/beam
! Combined flux in latest and established models = 0.130689 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 135 components and 0.130689 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077978Jy  sigma=1.204153
! Fit after  self-cal, rms=0.077974Jy  sigma=1.204117
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077974Jy  sigma=1.204117
! Fit after  self-cal, rms=0.077778Jy  sigma=1.203852
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.06 mas, bmaj=16.6 mas, bpa=-16.63 degrees
! Estimated noise=0.480593 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000507151 Jy
! Component: 100  -  total flux cleaned = 0.000848779 Jy
! Component: 150  -  total flux cleaned = 0.00105059 Jy
! Component: 200  -  total flux cleaned = 0.00121208 Jy
! Total flux subtracted in 200 components = 0.00121208 Jy
! Clean residual min=-0.002105 max=0.002143 Jy/beam
! Clean residual mean=-0.000002 rms=0.000511 Jy/beam
! Combined flux in latest and established models = 0.131901 Jy
selfcal
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 148 components and 0.131901 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077761Jy  sigma=1.203582
! Fit after  self-cal, rms=0.077765Jy  sigma=1.203536
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000139802 Jy
! Component: 100  -  total flux cleaned = 0.000301405 Jy
! Component: 150  -  total flux cleaned = 0.000433112 Jy
! Component: 200  -  total flux cleaned = 0.000574102 Jy
! Total flux subtracted in 200 components = 0.000574102 Jy
! Clean residual min=-0.002105 max=0.002137 Jy/beam
! Clean residual mean=-0.000002 rms=0.000505 Jy/beam
! Combined flux in latest and established models = 0.132476 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 158 components and 0.132476 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077754Jy  sigma=1.203381
! Fit after  self-cal, rms=0.077754Jy  sigma=1.203364
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077754Jy  sigma=1.203364
! Fit after  self-cal, rms=0.077581Jy  sigma=1.203324
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.182 mas, bmaj=22.37 mas, bpa=-6.179 degrees
! Estimated noise=0.603396 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000162256 Jy
! Component: 100  -  total flux cleaned = -0.000165171 Jy
! Component: 150  -  total flux cleaned = -9.36608e-05 Jy
! Component: 200  -  total flux cleaned = -1.21213e-05 Jy
! Total flux subtracted in 200 components = -1.21213e-05 Jy
! Clean residual min=-0.002014 max=0.002168 Jy/beam
! Clean residual mean=-0.000003 rms=0.000618 Jy/beam
! Combined flux in latest and established models = 0.132463 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 180 components and 0.132463 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077578Jy  sigma=1.203240
! Fit after  self-cal, rms=0.077573Jy  sigma=1.203215
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.89452e-05 Jy
! Component: 100  -  total flux cleaned = -7.29091e-06 Jy
! Component: 150  -  total flux cleaned = 8.37299e-05 Jy
! Component: 200  -  total flux cleaned = 0.000141698 Jy
! Total flux subtracted in 200 components = 0.000141698 Jy
! Clean residual min=-0.001942 max=0.002161 Jy/beam
! Clean residual mean=-0.000003 rms=0.000614 Jy/beam
! Combined flux in latest and established models = 0.132605 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 195 components and 0.132605 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077572Jy  sigma=1.203214
! Fit after  self-cal, rms=0.077573Jy  sigma=1.203200
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.056 mas, bmaj=16.61 mas, bpa=-16.63 degrees
! Estimated noise=0.479292 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.056 x 16.61 at -16.63 degrees (North through East)
! Clean map  min=-0.0018756  max=0.069279 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.591 mas, bmaj=15.89 mas, bpa=-17.43 degrees
! Estimated noise=0.833538 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0533038 Jy
! Component: 100  -  total flux cleaned = 0.0782937 Jy
! Component: 150  -  total flux cleaned = 0.0936549 Jy
! Component: 200  -  total flux cleaned = 0.103726 Jy
! Total flux subtracted in 200 components = 0.103726 Jy
! Clean residual min=-0.005086 max=0.005444 Jy/beam
! Clean residual mean=0.000009 rms=0.001304 Jy/beam
! Combined flux in latest and established models = 0.103726 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 40 model components to the UV plane model.
! The established model now contains 40 components and 0.103726 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.056 mas, bmaj=16.61 mas, bpa=-16.63 degrees
! Estimated noise=0.479292 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00976407 Jy
! Component: 100  -  total flux cleaned = 0.0156378 Jy
! Component: 150  -  total flux cleaned = 0.0193505 Jy
! Component: 200  -  total flux cleaned = 0.0218035 Jy
! Total flux subtracted in 200 components = 0.0218035 Jy
! Clean residual min=-0.002279 max=0.002390 Jy/beam
! Clean residual mean=-0.000000 rms=0.000613 Jy/beam
! Combined flux in latest and established models = 0.125529 Jy
! Adding 63 model components to the UV plane model.
! The established model now contains 96 components and 0.125529 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.182 mas, bmaj=22.37 mas, bpa=-6.179 degrees
! Estimated noise=0.603396 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00194169 Jy
! Component: 100  -  total flux cleaned = 0.00286586 Jy
! Component: 150  -  total flux cleaned = 0.0036405 Jy
! Component: 200  -  total flux cleaned = 0.00424269 Jy
! Total flux subtracted in 200 components = 0.00424269 Jy
! Clean residual min=-0.001949 max=0.002286 Jy/beam
! Clean residual mean=-0.000002 rms=0.000636 Jy/beam
! Combined flux in latest and established models = 0.129772 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00045251 Jy
! Component: 100  -  total flux cleaned = 0.000749998 Jy
! Component: 150  -  total flux cleaned = 0.00101789 Jy
! Component: 200  -  total flux cleaned = 0.00123467 Jy
! Total flux subtracted in 200 components = 0.00123467 Jy
! Clean residual min=-0.001865 max=0.002260 Jy/beam
! Clean residual mean=-0.000003 rms=0.000615 Jy/beam
! Combined flux in latest and established models = 0.131007 Jy
! Adding 90 model components to the UV plane model.
! The established model now contains 175 components and 0.131007 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.056 mas, bmaj=16.61 mas, bpa=-16.63 degrees
! Estimated noise=0.479292 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000289288 Jy
! Component: 100  -  total flux cleaned = 0.000534204 Jy
! Component: 150  -  total flux cleaned = 0.000695061 Jy
! Component: 200  -  total flux cleaned = 0.000843022 Jy
! Total flux subtracted in 200 components = 0.000843022 Jy
! Clean residual min=-0.001975 max=0.002152 Jy/beam
! Clean residual mean=-0.000002 rms=0.000514 Jy/beam
! Combined flux in latest and established models = 0.13185 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 197 components and 0.13185 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.077595Jy  sigma=1.203590
! Fit after  self-cal, rms=0.077594Jy  sigma=1.203284
wmodel J1857-2058_S_map.mod
! Writing 197 model components to file: J1857-2058_S_map.mod
wobs   J1857-2058_S_uvs.fits
! Writing UV FITS file: J1857-2058_S_uvs.fits
wwins  J1857-2058_S_map.win
! wwins: Wrote 2 windows to J1857-2058_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000241061 Jy
! Component: 100  -  total flux cleaned = 0.000307906 Jy
! Component: 150  -  total flux cleaned = 0.000244064 Jy
! Component: 200  -  total flux cleaned = 0.000154983 Jy
! Component: 250  -  total flux cleaned = 0.000124997 Jy
! Component: 300  -  total flux cleaned = -1.29381e-05 Jy
! Component: 350  -  total flux cleaned = 1.38815e-05 Jy
! Component: 400  -  total flux cleaned = -3.74307e-05 Jy
! Component: 450  -  total flux cleaned = -0.000110663 Jy
! Component: 500  -  total flux cleaned = -0.000110336 Jy
! Component: 550  -  total flux cleaned = -0.000133608 Jy
! Component: 600  -  total flux cleaned = -0.000156776 Jy
! Component: 650  -  total flux cleaned = -0.00024378 Jy
! Component: 700  -  total flux cleaned = -0.000242941 Jy
! Component: 750  -  total flux cleaned = -0.000304765 Jy
! Component: 800  -  total flux cleaned = -0.000426204 Jy
! Component: 850  -  total flux cleaned = -0.000524854 Jy
! Component: 900  -  total flux cleaned = -0.000658972 Jy
! Component: 950  -  total flux cleaned = -0.000715372 Jy
! Component: 1000  -  total flux cleaned = -0.000788857 Jy
! Component: 1050  -  total flux cleaned = -0.000843088 Jy
! Component: 1100  -  total flux cleaned = -0.000913329 Jy
! Component: 1150  -  total flux cleaned = -0.000947986 Jy
! Component: 1200  -  total flux cleaned = -0.00101524 Jy
! Component: 1250  -  total flux cleaned = -0.00101522 Jy
! Component: 1300  -  total flux cleaned = -0.00101548 Jy
! Component: 1350  -  total flux cleaned = -0.00109518 Jy
! Component: 1400  -  total flux cleaned = -0.00109487 Jy
! Component: 1450  -  total flux cleaned = -0.00114109 Jy
! Component: 1500  -  total flux cleaned = -0.00117161 Jy
! Component: 1550  -  total flux cleaned = -0.0012013 Jy
! Component: 1600  -  total flux cleaned = -0.00124537 Jy
! Component: 1650  -  total flux cleaned = -0.00134716 Jy
! Component: 1700  -  total flux cleaned = -0.00137571 Jy
! Component: 1750  -  total flux cleaned = -0.00141806 Jy
! Component: 1800  -  total flux cleaned = -0.00145999 Jy
! Component: 1850  -  total flux cleaned = -0.00151491 Jy
! Component: 1900  -  total flux cleaned = -0.00154215 Jy
! Component: 1950  -  total flux cleaned = -0.00160905 Jy
! Component: 2000  -  total flux cleaned = -0.0015694 Jy
! Component: 2050  -  total flux cleaned = -0.0015957 Jy
! Component: 2100  -  total flux cleaned = -0.00158286 Jy
! Component: 2150  -  total flux cleaned = -0.00159575 Jy
! Component: 2200  -  total flux cleaned = -0.00153231 Jy
! Component: 2250  -  total flux cleaned = -0.00149476 Jy
! Component: 2300  -  total flux cleaned = -0.00145741 Jy
! Component: 2350  -  total flux cleaned = -0.00137114 Jy
! Component: 2400  -  total flux cleaned = -0.00132255 Jy
! Component: 2450  -  total flux cleaned = -0.00128643 Jy
! Component: 2500  -  total flux cleaned = -0.00120289 Jy
! Component: 2550  -  total flux cleaned = -0.00115543 Jy
! Component: 2600  -  total flux cleaned = -0.00106151 Jy
! Component: 2650  -  total flux cleaned = -0.00102664 Jy
! Component: 2700  -  total flux cleaned = -0.00102662 Jy
! Component: 2750  -  total flux cleaned = -0.00100374 Jy
! Component: 2800  -  total flux cleaned = -0.00103774 Jy
! Component: 2850  -  total flux cleaned = -0.00103766 Jy
! Component: 2900  -  total flux cleaned = -0.00102649 Jy
! Component: 2950  -  total flux cleaned = -0.00099317 Jy
! Component: 3000  -  total flux cleaned = -0.000982123 Jy
! Component: 3050  -  total flux cleaned = -0.00098214 Jy
! Component: 3100  -  total flux cleaned = -0.000938499 Jy
! Component: 3150  -  total flux cleaned = -0.000927616 Jy
! Component: 3200  -  total flux cleaned = -0.000927603 Jy
! Component: 3250  -  total flux cleaned = -0.000873947 Jy
! Component: 3300  -  total flux cleaned = -0.000852591 Jy
! Component: 3350  -  total flux cleaned = -0.000820739 Jy
! Component: 3400  -  total flux cleaned = -0.000778602 Jy
! Component: 3450  -  total flux cleaned = -0.000747141 Jy
! Component: 3500  -  total flux cleaned = -0.000715871 Jy
! Component: 3550  -  total flux cleaned = -0.000684789 Jy
! Component: 3600  -  total flux cleaned = -0.000653894 Jy
! Component: 3650  -  total flux cleaned = -0.000643657 Jy
! Component: 3700  -  total flux cleaned = -0.000643759 Jy
! Component: 3750  -  total flux cleaned = -0.000582957 Jy
! Component: 3800  -  total flux cleaned = -0.000593029 Jy
! Component: 3850  -  total flux cleaned = -0.000562933 Jy
! Component: 3900  -  total flux cleaned = -0.000552983 Jy
! Component: 3950  -  total flux cleaned = -0.000562909 Jy
! Component: 4000  -  total flux cleaned = -0.000543107 Jy
! Component: 4050  -  total flux cleaned = -0.000503824 Jy
! Total flux subtracted in 4096 components = -0.000513608 Jy
! Clean residual min=-0.000633 max=0.000589 Jy/beam
! Clean residual mean=-0.000000 rms=0.000172 Jy/beam
! Combined flux in latest and established models = 0.131336 Jy
keep
! Adding 225 model components to the UV plane model.
! The established model now contains 422 components and 0.131336 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J1857-2058_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.056 x 16.61 at -16.63 degrees (North through East)
! Clean map  min=-0.0016391  max=0.066938 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J1857-2058_S_map.fits
wmodel /vlbi/uf001/uva//J1857-2058_S_map.mod
! Writing 422 model components to file: /vlbi/uf001/uva//J1857-2058_S_map.mod
wobs   /vlbi/uf001/uva//J1857-2058_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J1857-2058_S_uvs.fits
wwins  /vlbi/uf001/uva//J1857-2058_S_map.win
! wwins: Wrote 3 windows to /vlbi/uf001/uva//J1857-2058_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0669379 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000166894 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.747982 0.747982 1.49596 2.99193 5.98386 11.9677 23.9354 47.8709 95.7417
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0005 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.066 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  401.078 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J1857-2058_S_dfm.log closed on Mon Jan 14 04:52:56 2019